Ubuntu :: Tty1 Login On Boot After Changing Etc/X11/xorg.conf?
Jan 12, 2011
So I'm trying to get two fingered scrolling on my Ubuntu 10.10 netbook. According to advice fromhttp://ubuntuforums.org/showthread.php?t=516798I created an xorg.conf file in etc/X11 and put Option "VertTwoFingerScroll" "1"Option "HorizTwoFingerScroll" "1"in the file. I restarted my computer, and now it comes up withUbuntu 10.10 [Computer name] tty1[Computer name] login:Not only has this not happened before, I have no idea what to put for my username and password.
View 3 Replies
ADVERTISEMENT
Dec 11, 2010
I've just done a fresh install of Lubuntu 10.10 on an older Sony Vaio laptop. Having learned the hard way about editing xorg files, I wanted to create a backup of the xorg.conf file so that I dont have to do another install when I screw everything up. In a terminal, I typed
[Code]....
View 8 Replies
View Related
Apr 9, 2010
I have installed Kubuntu 8.04.2 on a USB stick with persistence to keep any changes I make after a reboot and it works fine. I then installed the 185 Nvidia driver to give me higher resolutions and it works fine.
But each time I reboot, my updated xorg.conf is replaced with the default xorg.conf that ships with that version of Kubuntu and a backup is made of my updated xorg.conf (the correct one) which looks like xorg.conf.20100409135913. I have to put the backup xorg.conf back in place to get my Nvidia driver to work with the correct screen resolutions again. Otherwise my screen resolution is too low.
What could be causing this behavor? I'm sure it not the persistence feature of the USB stick failing since a backup is made of my original xorg.conf.
I might add more information. The xorg.conf that gets changed after a reboot says "This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database." #
View 11 Replies
View Related
Feb 16, 2011
1. What is the difference between files (xorg.conf and xorg.conf-vesa)
2. No matter how hard I try I can't change keyboard layout in xorg.conf-vesa (I change it in file ) but there is no actually anything changing, it starts to get annoying - for example - below goes my xorg.conf-vesa, if I uncomment and set line from
[Code]...
View 3 Replies
View Related
Nov 20, 2010
I installed Ubuntu 10.10 on my 32gb flash drive. Just one large partition for the OS and about a gig for swap. Worked fine. Booted to USB on two computers and a laptop at home. Fine. Figured I'd try it on a work pc for the sake of testing a random computer. Well I stick the drive in, boot up, select usb from the boot menu and bam Ubuntu starts loading. I look away, it's cool ubuntu's loading. Well I turn back and it's a black screen. It's "<username>@whatever login:" or something close.
I use the username and password I created during installation and what I used to login to the computer like fifty million times while booted into Ubuntu. Well, invalid login. The first time I installed this OS on this drive I updated it through the update manager and rebooted. Next thing I know I type in my username and password, hit enter, and bam black screen, some stuff, then im asked to login again. Now after this next iteration I am faced with yet another faulty login screen. What is up with this OS?
View 3 Replies
View Related
May 3, 2010
I'm running the ubuntu based Green OS and cant get my video card properly configured. i've already gone through the forums to figure out what i need to do to get my ATI card working but my system wont let me access the xorg.conf file. i can see it using the the GOS file editor but it wont let me save the modifications. when i attempt to edit from a terminal window with su privelages it tells me that /etc/x11/xorg.conf does not exist. i've even tried booting into recovery mode and using the root instead of the sudo command. nothing i've tried will let me open the file.
View 3 Replies
View Related
Jan 26, 2011
I've read the how-tos (thank you oldcpu!) and wikis about how xorg.conf take precedence over the section configuration files in etc/X11/xorg.conf.d/, if it exist. I also understand that the xorg.conf can be partial. If it is missing some sections, these will be taken from the corresponding xorg.conf.d section config file. Currently I'm using a xorg.conf generated by nvidia-settings in one of my home machines, due to a dual-monitor setup. After generating xorg.conf, the device sections are:
in xorg.conf:
Code:
Section "Device"
Identifier "Device0"
Driver "nvidia"
[code]....
My question is if the Option "UseCompositeWrapper" "True" will be used or not. In other words, if a section exist in xorg.conf then it's correspondent in xorg.conf.d/ will be completely ignored *or* only the lines in xorg.conf.d/ that already exist in xorg.conf will be ignored?
View 5 Replies
View Related
May 13, 2009
Edited 5/14/2009, No-Replies have read everything I can find trying to resolve problem. Continued at * so order may be followed.Fairly new to Fedora, I had reset my Monitor setting from the Graphical Interface on the Desktop, (got an out of range error) Was able to SSH in and reset Xorg to correct values, however now the server does not boot to the Graphical Desktop, just has a spinning blue circle on black background. The server has booted and I can get in with SSH, all functions of the server appear to be working correctly, i.e.web, mail, ftp, etc. However it never goes to the Graphical login page as before.*Fedora 8..the perfect server + ISPconfig. On boot when Fedora states press any key I can edit the following line:
ernel /boot/vmlinuz-2.6.25.14-108.fc9.i686 ro root=UUID=67a30fd4-7022-4ebe-8f9d-07cd2aabd732 rhgb quiet
to
ernel /boot/vmlinuz-2.6.25.14-108.fc9.i686 ro root=UUID=67a30fd4-7022-4ebe-8f9d-07cd2aabd732 3
[code]....
View 1 Replies
View Related
Jul 10, 2010
I've been using ubuntu on a new desktop for a couple of months, but i had an old HP that was given to me in my basement. It has 384Mb of ram, and thats because i had a 256Mb stick laying around. I installed debian becuase it is more suited for older hardware (at least from what I've read). It installed fine, but it boots to a blank screen, and pressing ctrl+alt+F2 bring me to the command line. I checked /etc/X11/xorg.conf to change the driver to vesa, to find out my video card isn't even shown. I ran lspci and I found that it says my graphics card is Intel Corporation 82810E DC-133 (CGC) Chipset graphics controller (rev3) In the device section of xorg.conf, it merly says Identifier"Configured Video Device"
View 12 Replies
View Related
May 22, 2011
I have used nVidia my entire linux life (about 5 years clean and sober from M$). Recently, I have switched over to an ATI Radeon HD 5550 card. After many trial and error setups, I finally got the resolutions and screens set properly with a xrandr command, which I have now added to a shell script in ~/.kde4/Autostart. It has worked for me for a while now, but I really would like to get it set in the xorg.conf.d files so that I don't have to wait that extra few seconds after login for the screens to fix themselves.
Is there an easy way to take what xrandr does and export it to the xorg.conf.d files? If my video card recognizes my default monitor as DFP2 and the tv that I only sometimes use with this computer as DFP1, how can I ensure that the login screen for openSUSE/KDE4 appears on my default screen (an issue that drove me nuts a few months ago when I tried Ubuntu to see what all the fuss was about)?
My xrandr command that I use to fix it all is:
xrandr --output DFP2 --auto --pos 0x0 --primary --output DFP1 --auto --right-of
I am using the proprietary Radeon driver from the ioda repository. DFP2 is a monitor which has a optimum resolution of 1920x1200, and DFP1 is an 1080p HDTV. I can not reverse the output plugs for the screens even though my monitor is an HDMI monitor because I use the actual HDMI port on the video card to output audio to the television and the other plug is a DVI that I convert to HDMI for the monitor.
View 1 Replies
View Related
Apr 12, 2011
I was experimenting with new splash screens in the plymouth manager when my ubuntu stopped loading into the gnome desktop. Ive tried to search for some solutions over the internet but i cant seem to find any. and to top it all of, the server from which i used to get updates from seems to have stopped running.i need help in changing my server via the terminal and to help restore my gdm.
View 1 Replies
View Related
Mar 7, 2010
I installed windows 7 and recover grub from the karmic livecd successfully. Now I can access all the OS in my machine. The only weird issue that I have is that there's no login promote in tty1-6 any more. When I switch to tty1-6, I can only see a flashing underline promote. But I can input anything in tty1-6. How to get tty1-6 back?
View 4 Replies
View Related
Apr 22, 2011
I would like to run an interactive python script in tty1 on startup. This script requires user input outputs relevant data.I also need this script to be run as root as it accesses USB devices (and has to detach kernel drivers).It is an infinite-loop script, so I also want to be able to ctrl+alt+F to tty2 to actually login if needed
View 1 Replies
View Related
Dec 17, 2010
I tried most methods suggested on many sites to install drivers
## through the additional driver panel only
## through the Nvidia.run file I downloaded
## through the terminal using apt-get
All failed to start ubuntu gui it takes me to the console login and I noticed it says "saned disabled" edit /etc/..something. This problem made me install ubuntu again three times and every time I activate the driver then install the driver Nvidia.run or through apt-get and both leads to a black screen tty1 login. So what to do now I installed and removed many things and I won't reinstall ubuntu again. Also I typed compiz and this came on:
root@ubuntu:/home/sherbieny# compiz
Xlib: extension "GLX" missing on display ":1.0".
compiz (core) - Fatal: Root visual is not a GL visual
compiz (core) - Error: Failed to manage screen: 0
compiz (core) - Fatal: No manageable screens found on display :1.0
Launching fallback window manager. I want to install properly so that I can start normally and enable the extra visual effects and the custom effects. Please elaborate the steps clearly
New Info:
When I enter nvidia-settings : server X opens and says
You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run 'nvidia-xconfig' as root), and restart the X server. When I enter nvidia-xconfig as root and restart nothing happens and when I enter:
nvidia-detector it says none
and when I enter: nvidia-smi
Error: API mismatch: the NVIDIA kernel module has version 260.19.21, but this NVIDIA driver component has version 260.19.29. Please make sure that the kernel module and all NVIDIA driver components have the same version.
Failed to allocate an RM client
Could not allocate resources!
root@ubuntu:/home/sherbieny# apt-get update kernel
E: The update command takes no arguments
A new and very exciting error everyone now also the windows 7 that I have besides linux has also crashed and cannot open the login window. I don't know whats happening all I know is that few hours ago I logged in to windows normally now I cannot login to either one of them and the funny part is: I'm working on my thesis on this computer and I cannot work anymore and I'm supposed to meet with the professor on monday.
View 1 Replies
View Related
Aug 18, 2010
i i use ubuntu 10.04 and i buy a mouse, and i cant install it. i read on forum i need to put :
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
EndSection
[code].....
wireless via Bluetooth � 3-button laser mouse with scroll wheel � resolution 1600dpi, adjustable on 800dpi � range up to 10m � computer with Bluetooth or dongle required � 2x AA batteries required
View 14 Replies
View Related
May 26, 2010
i have VIA UniChrome Pro IGP grapgics. When i install linux max resolution 800x600@60hz and xorg.conf file are blank
some time ago i used fedora "xrandr" works great. But i don't liked fedora, as ubuntu
so i need program thats have option "Model"
Example: LCD 1028x768 or other
View 2 Replies
View Related
Jun 6, 2010
I've got an i5 Macbook Pro, on which I've got Ubuntu 10.04, which I use 90% of the time (mainly for work).
I've added a few lines to xorg.conf to make the graphic card run cooler and thus get some more battery life. Sometimes, though, I do need full graphic potential, for which I have another xorg.conf prepared without those lines, so I can switch back and forth when I need it.
Currently, to change back and forth, I rename the files accordingly and reboot, which is a pain in the neck. I tried restarting gdm after switching files instead but it didn't quite work (maybe I wasn't doing it correctly).
So, fellow experts, what's the easiest and fastest way to switch between two different X11 config files?
View 1 Replies
View Related
Oct 13, 2010
I've just installed the latest ubuntu (10.10) on vmware workstation and noticed the resolution is not 96 dpi so my fonts look a bit unsharp
I wanted to change that and noticed I don't have an /etc/X11/xorg.conf? So my question is of course...where should I put the "Option..." line to change it to 96 dpi?
View 1 Replies
View Related
May 7, 2010
Ubuntu 10.04
I can't find xorg.conf on /etc/X11/ How to create it?
View 7 Replies
View Related
Jun 2, 2010
Sorry if this was well covered here when most up-to-date Slackers moved to 13.0, but I have just jumped from 12.1 to 13.1. Generally very happy that I do not have to think about xorg.conf as I always found the structure of this conf file a tad confusing. However if I do need to (for example) change my video driver (I might for example want to try the nvidia driver from NVIDIA) or configure my touchpad - how do I do this ?
I understand that xorg.conf can still be created. If I do so, do I have to put all the stuff in that used to be there or can I just add the stuff I need to make the changes I am looking for?
View 4 Replies
View Related
May 1, 2011
Ok i start to find it boring to ALT+CTRL+F1 each time i want that when i boot it directly go to tty 1. But i also want it to load desktop environment, but not to show it, only load it, so if i ALT+CTRL+F7, it goes to desktop environment. If its not loaded, it will not go to desktop environment or it will take like 15 sec to load it, this is why i want to load it while i am in the terminal.Also, how can i switch resolution in terminal?
View 3 Replies
View Related
Dec 28, 2010
I don't know what I did but my Ubuntu partiton of my laptop works properly.After grub I get..Code: nouveau Couldn't find matching output script table I can login as root, stop gdm and startx.However I can't switch users or do anything else Laptop with Ubuntu Maverick 10.10 with Nvidia 105M graphics card.
View 2 Replies
View Related
Jan 9, 2010
Thinking to be clever, I made some changes to /etc/X11/xorg.conf and now I cannot see anything on the screen after Ubuntu boots up, just a 'mode not supported' message on the screen.How can I log into Ubuntu in text mode in order to fix the xorg.conf problem? I hope there is a "hot key" to stop Grub right before it starts loading Ubuntu and allows me to log in into Ubuntu in text mode.
View 2 Replies
View Related
Jan 12, 2010
i'm stuck with software rasterizing atm on 9.10, on 8.04 i had indirect rendering which was faster. how i can speed things up? :)
this is my current xorg.conf.
Code:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
[Code]....
View 9 Replies
View Related
Jan 20, 2010
Since the computer does not have xorg.conf, can I have the computer generate that file because I need to work on it and so I need to create it. That is why it would be useful to have a xorg.conf file still.
View 5 Replies
View Related
Jan 23, 2010
I've been trying to setup dual-screen in my system, but the control panel complains it can't find xorg.conf and so I can't save changes I make in the nvidia control panel. I was trying various methods of trying to get a dual screen working how I like it.Left = 17" 1280x1024 that sometimes works (needs hitting a few times)Right = 21" 1680x1050 main screenI wanted to have everything on the right one, my main workspace. And I wanted a seperate x workspace on the left hand one. (Mainly so that when the one on the left decides to not work, I can use the panel thing at bottom to move apps to the right one)
Now I know since 9.10 xorg.conf is non-existant and so determind on the fly or something.Is there a way to get X to write out the current working xorg.conf that's it's using? i.e. It's auto determind x,y,z and that's what right now this second is being used. I want to save this as a working xorg.conf so I can fine tune it etc.
View 1 Replies
View Related
Feb 26, 2010
I am trying to edit the xorg.conf file as described here:
[URL]
However, I cannot find the xorg.conf file anywhere.
View 9 Replies
View Related
Jun 1, 2010
I started using 10.04 today and it seems that the xorg.conf file disappeared. It's the first time that the default xorg driver works for my nvidia card, and I want to know what drive is this. How can I know what xorg driver the system is using? Is there a command for that?
View 5 Replies
View Related
Sep 13, 2010
After few days of Googling, downloading and testing, I've finaly managed to make a working Xorg.conf for my iMac G3 (Slot-loading, Summer 2001). As many of configs found on the Internet wasn't working for me, I'm posting mine, which is based on data from many configs (some from Ubuntu 8.04, were not working on this new release without adjustments).
Code:
View 1 Replies
View Related
Sep 15, 2010
I have a fresh install of Lucid on my PowerMac G4 Desktop (PowerMac3,6) / 867MHz. Right now I'm stuck with a resolution of 800x600. From what I have read, I know I need an xorg.conf file (install doesn't create one). I've looked around for a working one - and tried creating my own with no luck. I gather the following information is needed:
Code:
*-display
description: VGA compatible controller
product: NV17 [GeForce4 MX 420]
vendor: nVidia Corporation
physical id: 10
bus info: pci@0000:00:10.0
[Code]...
View 1 Replies
View Related
