Due to the fact that I changed OS's my printer is unable to run. Now that I run on linnux, the printer stated message about not having the process installed I think. If I stand corrected, I think that means I need to use the CD that came with the printer and reinstall.
View 4 Replies
I've bought a HP Photosmart printer, HP Photosmart wireless e-All-in-One printer - B110a and i've got a problem installing it properly. I'm using Debian 6.0 Squeeze. When i connect the printer, Debian doesn't recognize my printer as the Photosmart B109 printer for unknown reason. When i go to the site of HP and search for a driver, it directs me to this site:I've downloaded that latest hplip file as a .run file and installed it. My printer is recognized proparly, but when i try to print a colored image, it comes out black/white. Something is not crrect. Does anyone recognize this problem with this type HP printer?
View 7 Replies View RelatedI just upgrade to Fedora 11.
I have problem in installing the printer, no matter add printer in local network or Windows Printer via Samba.
The summary is as follow:
I have download a printer driver and had installed but got error when I tried to printer a test page.
I recently installed virtual box on debian and after it had finished my terminal informed me that I could remove some "unnecessary" software by use of sudo apt-get autoremove. When I did this, some of the icons on the desktop changed and all of the icons in the drop down menu on the bar at the top of the screen also changed to ordinary folder symbols. The theme that I was using also went away. I restarted the computer and it booted back into a shell prompt with no GUI. I tried to get back to the GUI using alt+f7 but it didn't seem to exist
View 2 Replies View RelatedUbuntu 10.04 and have a problem with loading the Linux printer drivers for my new Lexmark printer. When I try to load up the printer driver downloaded from the Lexmark site I am asked to enter a root administrator password, but when I enter the password I used to setup the OS it will not accept it. I have reviewed the "sudo" terminal password info, but as I am a newbie I was concerned about wrecking the installation.
View 4 Replies View RelatedI am trying to set uamsung clx2160N as a standalone network printer on my home network. It is a printer with standalone network capability and is connected directly to my router and has a static IP number. We have a few Windows computers at home and they had no problem detecting the printer, installing the drivers and working. Unfortunately my Ubuntu computer recognises the printer and I can even access it's setup and diagnositcs through its IP number. However when I try to add it as a printer, drivers for it cannot be located. #ve tried setting it up three ways:1. Using Samsung's own setup package - finds printer and all the details it needs to work but offers no drivers2. Using Ubuntu's printer setup - recognises printer but stalls at Searching for Drivers dialog3. Trying to *** printer using CUPS - no problem finding and recognising printer, but when I come to search for the driver I get Internal Server Error.
I have of course been trying to do all of these as root. That's the limit of my knowledge reached and searches on the net aren't helping me either. The printer works fine directly connected via USB, so the drivers are on the computer somewhere. How do I get them set up to use the printer on the network?
I want to add my printer to ubuntu 10.04. When I run the system-config-printer (System->Administration->Printing) I can't choose the "Add" in the menu bar (ctrl+n does not work either).
View 3 Replies View RelatedI have managed to install ubuntu server and set it quite nicely to share my files and printers over my network. I have two printers, a Lexmark e232 and a hp C3180 multifunctional printer (i.e. printer+scaner+a copy function). I have no problem installing the Lexmark printer on my windows 7 computers on the network, however, the All in One printer only gets recognized as a printer but there is no way to get it to scan. I have been reading on the web about all in one printers but I don't quite understand what the issues are.
Is there a way for me to get the full functionality of this printer over the network? I think this wouldn't be a problem if there was some sort of software designed by hp that would allow me to add printers that are not directly connected to the computer (via usb) but are shared from another pc on the network.
I notice sometimes if the page has graphics it either is very slow to print or wont print.Will adding memory help? I was thinking of a 64mb module.
View 5 Replies View RelatedI'm setting up a netbook for somebody (in another country!) and one of the last hurdles is the printer setup. I only have the netbook and not the printer with me. I know that the printer is a HP PSC 1215 All-In-One Printer but there seems to be a Catch-22 that I need to have the printer connected in order to be able to set this up using the GUI tools. How do I work around this? As a minimum I just want to enable printing, although scanning would be a bonus.
View 1 Replies View RelatedI have a parallel port printer connected using usb->parallel adapter. Sometimes the printer prints sometimes it doesn't.
A job will go the print queue and then sit there for ages. Sometimes if I unplug and then replug the usb->parallel cable the printer will print other times it will print half the document then freeze until the cable was unplugged and replugged again.
The printer never shows up in the list using lsusb (only my usb mouse and scanner do).
The printer is an hp deskjet 690c and worked fine under WinXP through a normal parallel cable. The one thing I haven't tested (but will test tomorrow) is the usb->parallel cable in XP.
I am unable to add my USB printer via the YaST2 Printer Configuration setup tool in openSUSE 11.3. The printer, a Dell Color Laser 1320c, was last used with openSUSE 11.2, and setup was entirely uneventful. No driver is provided by Dell, so I used the Fuji Xerox DocuPrint C525A Linux driver. The problem: To add a print queue in 11.3, a Connection must be specified (parallel, USB, network, etc). However, the configuration wizard fails to show the presence of the USB print device.
[Code]...
This printer was working just eight weeks ago under 11.2, and 11.3 is obviously able to detect its presence and identify it correctly. I feel certain the solution is simple, but I haven't found documentation that provides the answer.
My Operating system is Ubuntu 10-4 that I have just installed.
View 6 Replies View RelatedI have a Centos 5.3 server with Samba file shares and a shared Samba printer. I am not running a domain.
I recently changed my windows desktop pc from an XP machine to a vista 64 machine... It has a different user name. Everything went pretty smoothly - and the and the vista machine found the smba printer - and even downloaded the driver from the samba server. he printer works OK - and the file shares are fine.
The only thing which is quite odd - is that the Printer Properties dialogue takes more than 30 seconds to come up - and every action you attempt with the dialogue takes a similar amount of time.
I will include below the essence of my smb.conf:
I have a problem with a bad entry in my system-config-printer on my notebook computer which I think is interfering with my ability to print. I run fedora 10 on several systems in my house. On one desktop, I have a printer hosted which I think I have successfully setup for wireless network sharing (an HP895) using IPP.My problem seems to be a bad entry in my system-config-printer on my notebook computer which seems to stall when I try to print from applications (Firefox for example.) on the notebook. If I open up "Printing", I have 3 printers listed... one of them is for when the printer is attached directly to the notebook, one of them is the working printer description "printer" and the 3d is the bad entry. If I click on the bad entry to try to delete it, I don't have that option, but If I try to look at the "properties" for that entry, system-config-printer stalls (as do other applications when the printing dialog box starts up, and I have to force them to shut down.)
I will attach some screenshots and a copy of my /etc/cups/printers.conf file.How do I get rid of this "bad entry" in the system-config-printers GUI ? It doesn't seem to exist in the printers.conf file.
I have Ubuntu version 10.10 and I'm trying to install the HP DeskJet 1000 J110a printer. I have HPLIP version 3.11 (the latest version I believe). The printer shows up but when I try to print the error message reads: Printer requires the 'foomatic-rip-hplip' program but is not currently installed.
View 2 Replies View RelatedI am unable to connect to my printer wirelessly. I get this: Idle - "Connecting to printer..." The computer never connects. I can print a configuration report and get the ip address. If I type that in a webrowser, I get an error: unable to connect. Even if I plug the printer into the computer by a usb, I am unable to access the printer's ip address in the webrowser. I'm not sure how to proceed on getting the printer working wirelessly. It is a hp 6940 I use the HP Deskjet 6940 Series hpijs, 3.10.2rc1.9 driver. I have only recently been having printer problems. The printer has been hooked up on the same network for years. It still prints via usb.
View 5 Replies View RelatedI'm using an up-to-date installation of Squeeze with the default Gnome desktop and am trying to print. My knowledge of configuring printers is very limited if it even exists. Since a friend of mine is able to print from her Ubuntu computer, my plan is to copy her. Here's how she does it. She goes under System->Administration->Printing on the desktop. Then a window pops up titled "Printing" that lists various printers that are supposed to exist. It's possible to add one by selecting Add->Printer. It asks for the root password and then a new window pops up titled "New Printer" which has a subwindow called "Select Device" In my case, the "Select Device" window has the following options to choose from:
- AppSocket/HP JetDirect
- Internet Printing Protocol (ipp)
- LPD/LPR Host or Printer
In her case, she has an extra option called "Windows Printer via Samba". This is the option that she uses. The other options don't seem to work for her. I'm assuming that I just need to install some package in order to make this option magically pop up for me. Does anyone know what package this may be? I currently have the packages smbclient, samba-common and samba-common-bin installed..........
I'm trying to add my Samsung SCX4500W printer to my opensuse 11.2 machine running KDE.From Yast->Printer->Add printerI am able to set the printer up, however there is no driver for my specific network printer. Samsung does provide a linux driver but I have no idea what I'm doing when installing peripherals on linux basically
View 3 Replies View RelatedInstalled fedora/configued samba, shared printer and i am not able to access shared printer from any of the fedora machine. I am able to access the printer /shared folder from windows machine. I dont know the process of cups installation.
View 1 Replies View RelatedI have a canon printer which was working so far. After my latest upgrade its giving errors saying "Printer not connected -- Check your connection" Fortunately I had a backup of my root before the upgrade and one difference I see is that on the new system theres no /dev/usb/lp0 which there is on the old one. So how do I make it? Or should I use the /dev/lp0? Note they are different:
[Code].....
So (naturally) when I tried to make a softlink from /dev/usb/lp0 to /dev/lp0 it did not work.
I'm installed CUPS:
1. apt-get install cups cups-client hplip
2. /etc/init.d/cups start
3. localhost:631
When I try to add "New Printer" I see the message on the screen:
Unable to add printer: Forbidden
In log file message:
failed to CreateProfile: org.freedesktop.DBus.Error.NoReply:Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. Returning HTTP Forbidden for CUPS-Get-Devices (no URI) from localhost [CGI] CUPS-Get-Devices request failed with status 401: Forbidden
is it possible to install a netwerk printer, while not connected to the netwerk where the printer is?I installed opensuse on my sisters desktop and I want to install the printer that she and my parents are using at home. Is this possible?De printer is in a windows workgroup and shared. De name of the workgroup is DEROON and the name f the computer the printer is connected to is Nico
View 4 Replies View RelatedHaving made the transition from a certain widely used operating system to linux, suse 11.2, x64, successfully and pleasantly we are still left with a few problems.One of these is a few applications i have to use which run only in that old OS. ?To that end I have installed VirtualBox and got them to run with one glitch. I cannot print from VBox to my HP LaserJet 4000, lpt1 printer, which works fine in suse. Searching and posting on the Vbox forums turned up that lpt1 is not supported in the current vbox and that I need to set up a virtual network, set up the printer as a network printer and set it up as an lpd/lpr printer in Vbox WinXP. Have tried many different ways to do this without success, I think the problem is I do not know how to set up a network printer in Linux.
The virtual network is vboxnet0, which does show up in ifconfig, along with my eth0 net, and I can ping the windows guest, gateway and the host from either side host:suse/guest:winXP) respectively. Have tried numerous ways of setting up printer in YaST which works in suse but still does not work from WinXP guest. Have read the suse manual and several sources and searched forums with no results.Finally I am thinking I just don't know how to set up a network printer in linux. Using cups, kde, suse 11.2, don't know what else to tell. Samba is installed, although I am not using it to the best of my knowledge.
I recently got a T-Mobile Tap and I've been trying to connect it via USB to my laptop running Lucid.When I open up the icon that shows up on my desktop after connecting it, I can't run the setup files inside. It says: The file '/media/HUAWEI/checksetup.exe' is not marked as executable. If this was downloaded or copied form an untrusted source, it may be dangerous to run. For more details, read about the executable bit.When I try to change the permissions from ready only, I get: Sorry, could not change the permissions of"checksetup.exe": Error setting permissions: Read-only file systemCan I tried calling T-Mobile but they said they don't troubleshoot with Linux. They said it's an "older operating system".
View 2 Replies View RelatedHow can be changed a symlink from the /etc/rc2.d directory.I want tho change the time of start from S20 to S60.
View 1 Replies View RelatedI may have sabotaged my installation beyond repair, but I am nourishing a cautious optimism, as justified below, and would warmly welcome any ideas.Here's the scoop:The harddrive on my Dell Latitude is divided into a number of partitions; I used to run a Windows-Linux dual boot, so I had some EXT3, some NTFS, and some FAT32 partitions, but a few months ago decided to eliminate the windows, and thus converted the ntfs partition into a linux partition. I've been using this newly converted partition for temporary backups; it held no important data. This, at least, was my supposition: yesterday, I decided to change the label on this partition (cosmetic motives), and after cavalierly making the change with GPARTED, I now can't log in.
A few clues about what could be going on:1. The system boots up fine; when I get to the login screen, however, and enter my name and password, I get the following error message: "GDM could not write to your authorization file. This could mean that you are out of disk space or that your home directory could not be opened for writing. in any case, it is not possible to log in. Please contact your system administrator."2. All my files are intact (following some advice I saw posted on the forums, I hit cnt + alt + F1 and was able to log in) and as far as I can tell, I am not out of disk space. This gives me hope that maybe I can restore the system without totally reinstalling Ubuntu.That is about all I know. If anyone has any thoughts as to what might be going on, I would be very happy to hear them.
Desktop PC Dual boot XP/Linux Mint Laptop was Dual boot Vista/Linux Mint.
Changed my Laptop set up from dual boot Vista/Linux Mint 8 to Vista/Ubuntu 9.10.
I have two printers one of which (Canon BJC300) is physically connected to the Desktop PC. The other is netorked through a wireless router. Worked find with Samba/Cups in Linux Mint. Can't get it to work with Ubuntu. (Linux Mint is based on Ubuntu).
Desktop PC Name is "pcname"
Desktop PC Workgroup is "pcworkgroup"
Printer Name is "Canon BJC 3000"
Not really but they'll do for the demo.
Set up printer in Ubuntu smb://pcworkgroup/pcname/Canon BJC 3000
Appears to accept it that but doesn't print. Times out with 'printer unaccessible'.
Where do I need to concentrate my efforts?
Are there some permissions I've overlooked. I haven't altered anything on the Desktop PC.
Yesterday I've installed KDE (kubuntu-desktop) upon Ubuntu to give it a try after a very long time I didn't use KDE. I decided to remove it and go back to GNOME. I removed the KDE packages using this sudo:
[Code]....
The KDE has been removed but some how some of the font changed.
The font settings in the Appearance->Fonts are as they suppose to be (Sans,10...).
In Ubuntu 10.4 64 bit which i have installed on a partition next to windows 7, I can not change the cursor. when I click a different cursor nothing happens.
View 9 Replies View Related
