Ubuntu :: Cannot Switch From DVI Back To HDMI In Lucid?
Jan 14, 2011
Having a bit of an issue with my Lucid x64 HTPC. I can get the image to appear through DVI on a spare external monitor, but when it is disconnected and switched back to HDMI I get not picture on the TV any longer. I switched the sound output to an external USB device for testing the unit and noticed on reboot that I had lost everything via HDMI even though the setting had been switched back previously. Obviously a setting must be off here somewhere, but I've yet to find it. I've rebooted with only the HDMI connected, but still nothing.
I recently upgraded from Karmic to Lucid via the Update Manager. I would like to upgrade further by switching from 32 Bit to 64 Bit. I downloaded the Lucid 64 Bit ISO and wrote an install disk. When I reboot the computer with the install disk nothing happens.
Is There A Way Yet To Fix The Black All The Way Aroung The Screen With HDMI.Its Really Just A Digital Issue I Think!.It Works Through VGA Fine But The Audio Xtra Wire Thing Is A Drag.It Would Be Nice To Get Catalyst Working ( The Overscan Underscan Tab Like Windows) But Xorg.conf Would Be OK I Guess.
I installed ubuntu 9.1 today, my friend also installed it using a disc which I borrowed Everything seemed to go fine. I used boot camp to make a partition after going through the installation process I found out that, that was a bad idea and i just made a ubuntu partition of 18gb. I was able to get rid of the bootcamp partition so now i Just have free disk space left out of that.
I wanted to switch back to my Mac to get to work on somethings after I had installed ubuntu. However a after the GRUB and clicking on Mac A black screen with words and numbers I haven't seen before popped up. Here is some of what it said
I installed Ubuntu 10.10 over Windows 7, getting rid of Win7. I have decided that I want to switch back to Windows 7, because of more compatibility. Windows 7 came pre-installed on my laptop. Is there any way I can recover it? I did a full install of Ubuntu 10.10.
I'm installing XUBUNTU on an old Pentium 4 1.6 GHz machine with 256 MB memory. The Copy files progress reach nearly 90% and remained there for more than 15 minutes. I did a CTRL+ALT+F1 on the keyboard and I could see a terminal with ubuntu$. I now want to go back to the GUI interface to see where the progress is or to see any completion message. How do I do that?
I am relatively familiar with Ubuntu, but some time last week it updated and now ALT + Tab temporarily minimizes windows to switch between open apps and shows a little window with icons representing the open apps. I much preferred the old way of just switching between them without minimizing and the more graphically appealing (I guess to some) window. I have checked Keyboard Shortcuts and it seems that I no longer have that my original option available, is there another way to select that option, or add it back to the keyboard shortcuts or am I just stuck with it unless I decide to back up to a previous release? Hope this made sense, and I won't be able to try any suggestions until tomorrow so please feel free to throw as many suggestions as you want to me and I will try them all one by one tomorrow morning.
I installed Ubuntu 11.04 on a usb stick and have been running it from there. I was messing around with the "Login Screen" utility and changed the session choice to "User defined session" (or something similar). I thought this would allow me to pick the session to use (Unity, Gnome) but that was wrong. So right now, when I login, I have a blank screen with no menu bars. If someone could give me the commandline command to run the "Login Screen", I should be able to switch it back.
To the best of my recollection, here's what happened. I installed Ubuntu 10, all default options. No custom themes. Using Gnome. I installed Kubuntu. Again, all default options. Still using Gnome, though. I upgraded to 11. Then, when I try to switch back to Ubuntu, I can't get the default Ubuntu theme to stick. When I log in, it looks correct for about twenty seconds, then everything switches to Ambiance or Plymouth or something else. Basically, I'm trying to get the brown task bar back and I can't. It's all light-colored.
I'm running Kubuntu, but after trying an Ubuntu tool to help configure Grub, my boot up plash screen (xsplash? My card isn't KMS compliant, so I'm not using Plymouth) now shows the Ubuntu splash.
Anyone know how to switch which boot splash is used back?
I'm using Ubuntu 11.04 64bit. Mainboard Gigabyte GA-H55M-S2V. My LCD is a HDTV monitor which is plugged to onboard graphic card.
I don't know what happen with my Ubuntu. It sometimes goes black when I try to wake my PC when it's suspended previously. The screen is black, but I still can move mouse cursor. I also can do blindly click on stuff on screen (I could play a song last time by clicking randomly). This problem also happens sometimes when I switch back to PC from TV (My LCD is a HDTV monitor).
The only action I can do when it happened is reset my PC.
Having just upgraded to 10.10, I've discovered Unity, and I'm afraid its not for me. I absolutely loved the previous interface, and was quite shocked and saddened to see it disappear. But I'd like to keep all the other new software that comes with 10.10. So my question is, can I install the old 10.04 beautiful interface to run on the 10.10 edition? Re-installation is a MS solution, that turned me on to linux in the first place!
I wanted to split adsl line, but a friend of mine explained that this isn't possible.. So now my question is that can you somehow switch ethernet back to dsl or have a computer convert it so that nothing has to be done to the other modem.
Recently, I accidentally erased plymouth from my Fedora 12 system.I now have reinstalled plymouth.But I still do not have my graphical boot. How do I switch back to graphical boot?
I have a Dell Latitude D610, and am running a 2.6.21.7 kernel. If I close the screen on the laptop, the display output switches to the external VGA output. When I open the screen, the display output does NOT switch back. This occurs when running X and when in command line mode. Is there any way to get the output to automatically switch back when I open the screen?
I have used a wireless LAN PCI card for 3 years and now I want to switch back to the onboard wired LAN card but I cant get it to recognize and I have enabled it in BIOS also the wireless LAN card has been removed.Should I put it back in and then try to switch?
I want to switch off 3d i.e. dri on my laptop to save power. There is a bug in the intel video driver that makes it generate excess wakeups and thus increase power consumption. I don't use 3d so this is very annoying.
I have tried modifying /etc/X11/xorg.conf to insert an "NODRI" option in the "Device" section and have commented out both of the "load dri" commands in the "Modules" section. No go. When I look in the xorg log, these changes are seen but not acted on. The system appears to have hardwired defaults set somewhere which are difficult to override. It appears to be a new issue because with Karmic one still had control with xorg.conf.
Just generally I don't like changes like this because it is not documented on the wiki where and how to change the defaults in Lucid. Linux was supposed to be easily configurable so IMHO this is a step backwards.
I thought it would be cool and easy to install Windows 7, ended up being a headache and worthless so far. Now I only have the windows bootloader with vista and windows 7 as options. How can I get grub going again? I have all 6 fedore core 10 cds and a live cd in case those will help, I am using the live cd to play in fedora right now, but I am not sure how to get access to grub.conf and what to change in it, because I am pretty sure I have to add Windows 7 to it.
I'm a Linux college course student and can't et help from my "instructor". As part of my class, I've installed Fedora 12 on a secondary hard drive. I don't know the first thing about Linux and am totally lost trying to get back to my other hard drive to access the Windows XP OS. All my stuff for the courses I'm taking this summer are stored THERE. Can anyone help me with very simple, easy to follow instructions for how to get back to Windows AND also have access to Linus on the secondary drive?
I have a server with Fedora 13 x86_64 installed that uses gnome as the desktop. Recently I purchased a generic KVM switch for my office. When I connect this to the server the video res drops back to 1024x768 instead of 1200x1024. I did some research and apparently Fedora 13 no longer uses the Xorg.conf file for display setup, it detects the hardware in the fly when you boot and uses the appropriate drivers (unless one exists in the /etc/X11 folder).
The specs for the KVM say that it can do way more than 1200x1024 so I can't see a problem with that. Also I tested it with a windows installation and I was able to obtain 1200x1024 resolution. The video card is a NVIDIA GeForce 8400 GS and the current driver being loaded is the nouveau according to lspci. When connected to the KVM the display widget in gnome wont detect the monitor or graphics card anymore. I used system-config-display to change the display settings and it created this Xorg.conf file -
I'm planning on going from Crunchbang 9.04 back to Ubuntu Lucid Lynx. My main concern is drivers and such. I have an Asus K40 with 4 gb ram, and Nvidia graphics cards. Last time, I had a disaster with Jaunty. The suspect is Gnome, as Crunchbang works. Is there a chance that I could have issues using the 64-bit 10.04 LTS? I need a stable system. It is going to take me a while to set up the new system so I want to make sure I'm prepared for any issues. I'm doing a clean install. I can pull up hardware types, etc, if need be later tonight.
when I boot my pc with fedora 10, it displays the white cube, although i can rotate it but it does not seem to work i cant see any desktops. How can I switch back to the normal desktop view or disable compiz fusion ?
I have a machine running Ubuntu 10.04 and I accidentally removed the Rhythmbox icon in the notification area by right clicking it and I think I must have selected remove or something.
The problem is I cannot seem to get it back and it is enabled under the Plugins section of Rhythmbox.
I accidentally deleted my /etc/fonts/font-config file and now my fonts are all terribly out of whack in several applications including Synaptic, Chromium, Firefox, etc. How do I reset my fonts back to the Lucid Lynx default?
I hate using Software Center. I can't pick more than one program to install at one time. It downloads only one program at a time.The downloads take longer. I'm not able to look at all available programs at once. It doesn't categorise the programs on the sidebar, but instead you have to use another icon window. Gnome-app-install was just easer to use. Anyone else feel this way?
Following lines taken from other replies in this post to make it easier to do:
-You can install gnome-app-install from this ppa repo.
Laptop only has external display. When karmic boots 2.6.31-21 and initrd.img has finished loading, and I have taken quiet splash out of boot line, I get nothing on the external display until gnome come up. Does the kernel driver only recognise internal displays until X takes over, or is there something wrong with the karmic 855GM kernel driver?
I made the error of installing FGLRX on lucid. After the install, Plymouth resolution sucks and my laptop will not come out of suspend/hibernate. When I use jockey-gtk to disable FGLRX, it will not allow me to use compiz for 3d graphics. However, out of the box, I was able to run compiz no problem.How can I revert lucid back to factory form, where it was able to perform 3d acceleration without the use of FGLRX?
