Initially, I had dozens of errors from missing processes. I chrooted from live CD and reinstalled them.Now I got this:
Code:
fsck from util-linux-ng 2.17.2
/dev/sda5: clean, 213665/4104192 files, 2426106/16389120 blocks
[code]....
So I just partitioned my hard-drive, one side with windows the other to set free for ubuntu. It all worked fine. I put in the liveCD of ubuntu 9.10 and installed on to the partition. However, I have a problem. When it boots up it asks me to either boot into linux 2.6 or windows 7. Windows 7 works fine, but when I boot into ubuntu, the loading screen comes up and then it doesn't seem to boot into GDM. It's all command-line interface. I've tried sudo apt-get update and upgrade, but it isn't connected to my network yet so I can't do that. What can I do?
View 9 Replies View RelatedI've just added an application to load on startup in gnome.At first gnome loads properly,but after few seconds that application starts automatically and I can see its icon on taskbar , then gnome freezes and I can't do anything in gui.
How I can remove that application from starup of gnome using command line?
i've gotten my fedora 12 to the point where i can run python3 scripts from command line and can call up python 2.6.2 idle with the command 'idle' from command line. what command will call up python3 (3.1.2 to be exact) idle?
View 5 Replies View RelatedI have a many text files that have XML tags all shoved into 1 line. I want to create a new file that splits each XML tag onto a new line. code...
View 3 Replies View RelatedI'd like show a certain line or lines of a file with context, kind of like a unified diff, on the command line in Linux:
$ (something) -l 154 stuff.py
150: def foo(bar):
151: """
[code]....
How can I print Linux command line history without including the line numbers? I want to send it all to a text file like this:history >> history.txt
View 1 Replies View RelatedI know my way around MS Windows much better, but I just don't feel right trying to program something for Android on a Microsoft operating system. I am interested in Android programming so I followed the instructions on [URL] to install the environment on my computer...
I just installed the JDK, SDK, Eclipse successfully (or I assume):
* When I get to Step 4 where I'm supposed to run 'android' it will not run. I get the error message "android: command not found" (I am definitely in the right directory).
** When I double-click it in nautilus, it opens up in gedit. I can set the permissions in nautilus (through the properties - Allow executing file as a program) and get it to work,
My system:
Intel i7
Ubuntu 10.10 Maverick Meerkat
android-sdk-linux-x86
eclipse 3.6.2
how to pass something more than a one-command startup for gnome-terminal. I will give an example of what I'm trying to do here:
Code:
#! /bin/bash
#
#TODO write this for gnome and xterm
[code]....
This same error occurs if the gnome-terminal line is changed to
Code:
gnome-terminal -e mcTerm
Is there any way to pass more than one command on to gnome-terminal? I have tried various single and double quoting senarios and in a final attempt, I abstracted to an exported function all to no avail. Perhaps even though gnome-term is better at many things than xterm, xterm trumps it in this instance.
Code: cmd='date | wc'
$cmd If this script is executed, an error is generated. The reason written was that "The execution fails because the pipe is not expanded and is passed to date as an argument".What is meant by expansion of pipe. When we execute date | wc on the command line, it goes fine.then | is not treated as an argument. Why?
I installed the Berkeley DB on the Ubuntu server and tried to access the dbxml from the command line and it returns command not found
path/to/dir/dbxml-2.5.16/install/bin$dbxml
-bash" dbxml: command not found
Can someone point me in the right direction
I tried
Code:
chown -R owner:group *
which does not work on the invisible directories (why?). When I used ".*" as wildcard it changed all (visible) files including the parent directory (the one I was currently working in which is the "dot") . I can change the invisible directories owner and group using dophin but how is it done from the command line?
I am trying to learn how to pass more than a one-command startup for gnome-terminal.
I will give an example of what I'm trying to do here:
Code:
#! /bin/bash
#
#TODO write this for gnome and xterm
USAGE="
${0##*/} [-x] [-g]
code....
However, running with the -g option to invoke gnome-terminal, I get a "There was an error creating the child process for this terminal" error.
This same error occurs if the gnome-terminal line is changed to
Code:
gnome-terminal -e mcTerm
Is there any way to pass more than one command on to gnome-terminal? I have tried various single and double quoting senarios and in a final attempt, I abstracted to an exported function all to no avail. Perhaps even though gnome-term is better at many things than xterm, xterm trumps it in this instance.
I'm trying to convert this awk command from command line into an awk script, but just cannot get it to work:
This is what i have after my BEGIN
Am i missing something here? this just prints out the count for everyline, not counting lines on 5th field that match 'A'
So I turn on my PC this morning, and it comes up with this telling me to use 'TAB' to see a bunch of options I can use, not knowing any idea on how to use them properly I type in 'boot', it returns with 'error: no kernel' and then I type 'exit', it just reboots.
I've scanned endless posts on the forum trying to find the most useful replies and tried to use 'find /grub/stage2' and 'find boot/grub/stage2' and it says 'find is not a command' so that failed. I then tried to find out the partition my installation is in, which is hd0,1 so I tried using 'setup (hd0,1) which returned with 'setup is not a command'. I even tried 'boot (hd0,1) but it returned with the first error 'error: no kernel'. Luckily, when I installed Ubuntu I dual-booted it with Windows so I'm still able to use the Internet but I would love Ubuntu back and I had a lot of important files on it. So does anyone know how to solve this?
By the way, the way I installed Ubuntu was through Windows using 'wibu', it's worked absolutely fine ever since this morning. Oh and I'm using Ubuntu 10.04 (Loopy Lynx or whatever it's called ;p)(Also, for more information this screen appears after I choose 'Ubuntu' from the Windows bootloader, it doesn't even get to the Ubuntu bootloader it just goes straight to that screen)
[Code]...
how do you write the ASCII character #27 in the vim command line?
View 6 Replies View RelatedUsing netbook asus 1005ha with lucid beta 1 with most of updates on learning to use the CLI and headaches cd command does not seem to reconise directories here is a sample
Code:
yeh i know read the f#####g manual i am but any help would be greatly accepted tried sudo with same commands same problem did have a problem on my debian system that was to do with paths this is not the same on a different footnote anyone thinking of upgrading to lucid sit tight on 9.10 there are still to many issues that need ironing out for a system that is your main system.
i have a file, 2fsrl, that i want to run at startup. If i type /home/kent/2fsrl in the terminal it works. Although it won't work if i put the command in Startup Applications.
In my file is this:
synclient VertTwoFingerScroll=1
synclient HorizTwoFingerScroll=1
synclient EmulateTwoFingerMinW=5
synclient EmulateTwoFingerMinZ=48
It's for 2 finger scrolling
i need to run this command at the boot of computer
Code:
hdparm -B 255 /dev/sda
i saved this command in the file /etc/rc.local but i don't know why...it doesnt work, so i have to run it after boot from terminal..here there is the content of the file:
Code:
#!/bin/sh -e
#
# rc.local
[Code]....
I know how to make things run at startup, and obviously know how to run a command in terminal (type and enter... duhhhh). However I would like to be able to run vnstat in terminal when my computer logs in, this is very handy for seeing how much I have downloaded. I have a terminal embedded on the desktop and would very much like to run vnstat in it for me when it starts, I know I could just type in vnstat when I've logged on, but where is the fun in that? Just having it already there for me would be far better.
The command for starting my desktop terminal is as follows:
Code:
gnome-terminal --window-with-profile=trans --geometry 90x40+280+30
Relative newbie here - seeking advice on having a command run on start-up. Specifically, I want to have a chgrp and chown execute on a specific directory, subdirectory and associated files. I'm not looking for advice on how to do it (I'd like to muddle through it on my own - I learn better). And, I'm not looking for alternatives. Background - I think this is the easiest way for me to have two users on the same PC upload photos that each user can have full access to, and do things like back-up etc.
View 9 Replies View RelatedI wish to enable battery tab in Acer 751, Lucid. The command I type in terminal every time I start the netbook is: Quote: cat /proc/acpi/battery/BAT1/info How do I make it run automatically on start up?
View 2 Replies View RelatedI know this has been asked a 1000 times, but none of the solutions I've read so far work.I need to run the following terminal command every time Ubuntu (10.04 64bit) starts:Code:xset m 9 1This boosts mouse speed to maximum. I don't know why, but it is the only thing that works. All built-in mouse settings are at maximum, yet my mouse crawls across the screen when Ubu starts. So far, I have tried:Creating a startup script called "/etc/init.d/autorun.sh" containing code...
View 9 Replies View RelatedI've searched everywhere, but they all talk about BOOTING into the terminal instead of ubuntu. But here all I want is for ubuntu to automatically run a certain command when I boot into ubuntu.This is related to the screen brightness change problem that's still much of an unsolved mystery for ubuntu and I have mostly solved this 'm able to change the brightness with sudo setpci -s 00:02.0 F4.B=xx, xx being from 00 to FF, but it doesnt seem to stay when I log out and log back in. Is there any possible way to put a terminal command in the startup applications or something or a possible solution to the brightness problem that I havent discovered yet?
View 9 Replies View RelatedHow would i make ubuntu just execute this
Code:
deluged -p 10002 -c ~/delugebig/ at startup? Just print it as if i myself would print it in the termial.
Well, I want to run a terminal command at startup. I Google searched, but all the threads were ~5 years old. The command I want to run is code...
View 9 Replies View RelatedSince a few weeks my PC have been working slow and the gnome system Monitor says that my cpu is working at 100% all the time. when I ran top command appears:
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
770 root 20 0 4060 308 240 R 76 0.0 8:41.05 yes
919 root 20 0 4060 312 240 R 49 0.0 8:23.39 yes
[code]...
I want to auto run
Code:
sudo updatedb at Ubuntu startup. Is this okay: [URL]...
I would like to setup a command to run when I start up the terminal, but have the terminal stay open for use when it's finished. I was trying to get my terminal to run fortune whenever I start it just for cosmetic value, so I tried changing the launcher command to gnome-terminal --command=fortune, but that makes it just output the fortune result and then terminate.
View 1 Replies View RelatedI have CentOS 5.5 with no GUI. How do I enable commands/scripts to run on startup when the server is rebooted?
View 2 Replies View Related