Ubuntu :: Can't Ping Emulated Routers In GNS 0.7.4 10.04
Aug 20, 2011
I`m using GNS3 v 0.7.4 under Ubuntu 10.04 to emulate Cisco devices. I face a problem no communication between emulated devices. Currently I have two routers configured and ping between them doesn`t work.
Part of log file:
Aug 20 22:14:53.911 CPU0: PCI: read request at pc=0x60603f34: bus=0,device=7,function=0,reg=0x00
Aug 20 22:14:53.911 CPU0: PCI: read request at pc=0x60603f38: bus=0,device=7,function=0,reg=0x00
[Code]....
View 2 Replies
ADVERTISEMENT
Jun 2, 2009
I recently built my second general-purpose server, and recently installed fedora core 10 on it. The first thing I attempted to set up after installation was the network - and that's where it's gone wrong When editing a network device using the graphical system-config-network utility, I find that the subnet mask is being automatically changed to match the default gateway address every time I attempt to modify any of its settings (or sometimes even when I cancel the changes). This also means that I cannot set the subnet mask, as it simply won't accept my setting for it. I seem to be able to get around this glitch by setting the subnet mask using the shell version of the same utility, but that doesn't solve my network issue.
Even when I use the shell utility to fix the subnet mask, I'm unable to ping other computers or routers on the network even when ifconfig indicates that the desired ip address has been taken, and other computers on the network are also unable to see the server. I'm using a wired connection and a static IP address on a network with no DHCP.
View 14 Replies
View Related
Jul 15, 2011
I am using an virtual machine. where I need to ping from one machine to another. earlier I was able to ping. But after going to google.com once, I cannot ping back to this machine.
But if I gave ping -I eth1 <IP> then I can ping.
I cannot install any package, so tell me solution which includes not installing any package.
View 2 Replies
View Related
Jan 31, 2010
I might be going Back To linux after i relearn a bit and understand it more. Now i need to understand something first, How can i get Linux to boot with EFI and not Emulated BIOS?
View 2 Replies
View Related
Apr 17, 2011
In a shell script. And use that in a condition.
Something like:
Code:
if(pts) echo "emulated"
if(tty) echo "virtual"
View 3 Replies
View Related
Jan 15, 2010
If possible I'd like to have the translucent/transparent windows that Windows 7 has, on CentOS. Is this possible and if so, how?
View 6 Replies
View Related
Jul 24, 2010
I have two machines on this network, one running Ubuntu and the other running Fedora.
When I'm using the Wireless network on the Ubuntu machine, I cannot ping the Fedora machine. Everything else works. I can browse the net fine.
If I switch over to the Wired Network then I can ping the other machine.
I don't understand why ping doesn't work only over the Wireless. I can ping the router so I'm guessing it's getting blocked by the router but I didn't block ICMP traffic.
I tried asking on IRC and they ran out of ideas too to find out where the problem is.
View 7 Replies
View Related
Aug 5, 2010
When i ping www.google.es, i get something like:Quote:
ping www.google.es
(wait 20 seconds)
64 bytes from 66.249.92.104: icmp_seq=2 ttl:53 time=80 ms
[code].....
View 2 Replies
View Related
Feb 23, 2011
This applies to my 2 opensuse PC's, my Windows PC is fine.I can ping a hostname, say "PC1" but I can not ping PC1.domain.local (even the host PC can not ping it's own FQDN). When I ping just the hostname the ping stats even list the FQDN.Onto the next issue, since all my PC's, have the domain prefix domain.local, my Synology can not. I can ping it's IP and that is it. I can resolve it's name with nmblookup just fine tho and that is what is killing me. How is this not resolving.Even weirder, I can browse to "Synology" in Network Servers under places on the slab.
View 3 Replies
View Related
May 13, 2011
Even ping google's ip address doesn't work. unknown host error using backtrack4 able to browse net with these settings.
My network settings:
What's the problem with these settings...
View 10 Replies
View Related
Jul 9, 2010
Ive got a problem on my server ....installed Debian 5 , Webmin and than syscp settung up syscp ready ....
I try to ping "localhost" ansver ping: unknown host
I try to ping "localhost." there is a host with IP 127.0.0.1
I need it to change it in "localhost"
Is that the bind9 maybe?
View 1 Replies
View Related
Apr 6, 2011
I have a debian server installed with a static ip. Now i am able to ping my ip, but when i try to configure a domain name with the nameserver as my ip, i am not able to ping the domain name
eg:
View 7 Replies
View Related
Feb 1, 2011
I just installed my first EVER bind DNS server. I am running bind9 on Ubuntu 10.04. Everything seems to be working great except one thing: If I ping a host that I have set up in bind by its HOSTNAME the pings take 5-6 seconds to reply/print to the screen between each echo response. If I ping by the host's IP address, they echo back very quickly.
I have read that IPv6 can cause this, but I have disabled it in /etc/sysctl.conf and the problem still exists.
I know everyone says this can't be a DNS issue, but this never was an issue with dnsmasq (which i was using prior), and it doesn't make sense that the ping are ONLY slow when pinging by hostname and not IP.
Configs below:
Ping by hostname - there is a 5-6 second delay between each one of the responses:
Code:
Ping by IP - the responses come VERY quickly one after the other:
Code:
/etc/resolv.conf:
Code:
Code:
rev.0.168.192.in-addr.arpa:
Code:
View 10 Replies
View Related
Apr 29, 2010
So, I have an Virtual Machine running CentOS 5.4. It sits behind a hardware firewall which also does NAT'ing. I've set up plenty of these, so I know for sure the firewall and NAT rules are set up correctly. From the host, I can ping anything in my subnet and the gateway. But I can't ping anything else beyond the gateway. I can perform DNS queries and when I try to ping, it finds the appropriate IP address.But from the outside, I can ping the PUBLIC address (It's a 1 public to 1 private address NAT, not 1 public to multiple private). I've tried it with IPTABLES on and off, with no change.
View 11 Replies
View Related
May 26, 2010
I have Mandriva One 2009.0 (192.168.1.100) on one box and Mandriva Free 2010.0 (192.168.1.118) on the other. I can ping router (192.168.1.1) from both of these boxes but I can't ping one box to the other and the other way around. What's going on?.
Do I have to change some settings in router?. Or is it firewall issue on those two machines?. Both of these boxes are connected by cable. Symbol of the router: TL-WR340G.
View 2 Replies
View Related
Aug 13, 2011
it's been asked million million times and billion billion answers have been given BUT none of them worked for me the ip is 192.168.0.1 but what if i changed it somehow and forgot it? how do i find it? ifconfig gives my own ip: 192.168.0.2 netstat -nr gives a bunch of addresses including 192.168.0.0 but nowhere i can see the 192.168.0.1?
View 6 Replies
View Related
Jul 8, 2010
When I try to copy a file from a shared folder of other laptop, the whole of data passes through the router.This affects the internet bandwidth within the network. Is there a way to access the shared files without necessarily going through the router and also without affecting the internet connectivity.
View 1 Replies
View Related
Apr 1, 2011
I connect to multiple wireless system each day but when I encounter a Linksys-n router the computer will recognize it and connect but does not go online.
Does this give any clue for why it will not connect?
Code:
802.11a/b/g
System wireless is: Toshiba Satellite M115-S3094 with Intel PRO/Wireless 3945ABG (802.11a/b/g), Ubuntu 10.04
View 1 Replies
View Related
Apr 8, 2011
My first one is the network: Our routers' ethernet ports are all in use and I cant get one of them. So Im asking you what I need to buy. Our router now is a speedport w701v. The new router should have wlan and good working LAN. It shouldnt be very expensive... give me some tips what I should look for (because Im very new with router...) and maybe give me a link where they tested many routers (and where I can trust the results).
View 3 Replies
View Related
Jul 18, 2011
I just installed my Ubuntu 11.04 alongside with my Windows 7. The only problem I have with my Ubuntu is that it cannot seem to find or connect to any routers. I think it COULD be the drivers that are missing. When I try to use the router I have at home with my Windows 7, (on the same laptop) it works fine. I use a Airport Extreme router.
View 6 Replies
View Related
Sep 1, 2010
I have 2 routers both with 5 network cards (both different subnets). On both machines I have the following configuration: Eth0 is the internet conection, Eth1 is the conection to the other router and the other network cards are for the subnets.My current Ip tables script allows all the subnets of one router to see each other but not the subnets of the other router.
In the new situation I want not all but specific subnets to see each other (no problem here)The issue is that some of theese subnets are subnets of the other router. For example the subnet of eth2 router1 should be able to connect to eth 3 on router2. This is were eth1 comes in play. My plan was to configure iptables so that in above example eht2 would be forwarded to eth1, which will forward to eth1 on router2.Then the iptables configuration on router2 will forward it to the network card of the correct subnet.
eth2 (router1) -> eth1 (router1)
eth1 (router1) -> eth1 (router2)
eth1 (router2 -> eth3 (router2)
[code]....
View 5 Replies
View Related
Dec 27, 2010
if there are any routers that have optional NAT and if so, what is this feature called? Which routers have it? I googled "optional nat," "nat button" and a few other phrases and wasn't able to find anything.
View 14 Replies
View Related
Mar 26, 2010
I have two routers. One is a Verizon ProLine and the other is a Dlink. My setup is myComputer-Dlink-ProLine-Internet. I'm trying to get port 80 requests from the outside, access my http server on myComputer. I tried port forwarding on both routers, but that didn't work. I also tried to make the ProLine treat the Dlink as a DMZ, but that still doesn't work.
View 4 Replies
View Related
May 14, 2010
I want to make changes on my router bios for my server I have to go to my windows booted laptop rather than just 192.168.1.1 right here at my server. I only have to do a 360 in my chair and I am at my laptop but I don't want to. Everytime I type the gateway ip it reads off the name of my router and looks fine. But I enter my authentication info and it just returns the login window blank... something ubuntu-side?
WRT160v2 linksys wireless N router (Of course I have cat 5 running to my server)
Ubuntu 10.04 LTS running desktop ontop (because I am still learning how to navigate the console)
View 3 Replies
View Related
Oct 18, 2010
Is there a list of wireless routers and wireless usb adapters floating around here? I want to find a router and usb adapters that are ready to go right out of the box to set up wireless at my house.
View 4 Replies
View Related
May 6, 2011
I have a 6to4 tunnel running on Ethernet (subnet 2002:ad4c:16cc:1) without problem. It runs radvd and announces a default route back to the Internet like this: "default via fe80::6a7f:74ff:fe0a:fbec dev br0"
On this same Ethernet I have a Linux plugbox (fe80::225:31ff:fe01:cc) which is a gateway to a network of IPv6 enabled sensors. I've assigned this second subnet 2002:ad4c:16cc:2. How do I get the plugbox to announce "2002:ad4c:16cc:2 via fe80::225:31ff:fe01:cc" so that the hosts on the Ethernet (2002:ad4c:16cc:1) will automatically pick up the route? The route works if I add it to the boxes manually. I've tried getting radvd on the plugbox to do this but I've had no success.
View 3 Replies
View Related
Jul 25, 2011
I have a modem connected to my router (pfsense on 192.168.1.1) which is then connected to a wireless AP (192.168.1.253). A number of PCs pick up the wireless and all is well.I've just received another broken PC that I've kicked into life and was going to run a FreeNAS box with it to back up a number of the PCs on the network. I've actually hooked this up via ethernet to my "server" PC (192.168.1.125 on its wlan NIC). Its all set up so that the server eth NIC (10.42.43.1) is connected to the FreeNAS box (10.42.43.2) and the FreeNAS box can ping both interfaces of the server, the router and the net, and any other box on the 192.16.1.x network. The problem is that I can't for the life of me get any of the 192 boxes to ping the FreeNAS box. I'm presuming its a routing / gateway issue with the server box but being pretty damn hopeless with these things I've been stumbling about breaking things.
View 5 Replies
View Related
May 20, 2011
My boss gave me the task (on a very tiny budget) of wanting to connect our remote offices to our network. Solution I came up with is Site-to-Site VPN.
I want to use OpenVPN on the Linksys Routers (again very tiny budget) and have them connect to our Cisco ASA5505 Firewall, but I am running into major problems.
Question is, even though they both use IPSec SSL are they compatible? If not, is there a work sround?
View 1 Replies
View Related
Jun 14, 2010
So I have 3 home routers, 1 belkin and 2 netgear. I have my ISP internet connection coming into my belkin, which I then have the 2 netgear routers (from their WAN) plugged into Belkins LAN ports. Now the Ubuntu computers I have on Netgear LAN 1 and Netgear LAN2 can get to Belkin just fine (at 192.168.1.1), but I am unable to access a computer on LAN1 from a computer on LAN2 and vice-versa. My Belkin is 192.168.1.1, my Netgear1 WAN is 192.168.1.100 and Netgear2 WAN is 192.168.1.200. I have the netgears both assigning DHCP IP's from range of 192.168.0.100 to 192.168.0.150 on their LAN ports.
Now, I have set Netgear LAN1 port 80 NAT'd to go to one of my computers on it. I try to access 192.168.1.100:80 from a computer on Netgear LAN2 network and it say host unreachable.What am I doing wrong?
View 1 Replies
View Related
Mar 19, 2011
My platform is linux Centos 5. I have read that to learn programming is to read well-written code and take some project to work with. I am always fascinated by routers and firewalls. Like pfsense and vyatta. May be my searching skills are worst but i am not able to find any good tutorials. Ofcourse i dont expect anyone to write a complete router on their blog but wasnt even close to it.
View 1 Replies
View Related
