I'm having a problem with my external drive under Ubuntu 9.04. After a reboot Ubuntu seems no longer to mount the the 3 seperate partitions on my external drive. I've added some screenshots of my fstab file which i tried just to let Ubuntu mount my drives, without any results!Can someone help me? If more info is requered, please let me know.
View 4 Replies
I have been trying to share folders from my main PC which is running Ubuntu 10.04. I have been able to figure out Samba enough to get my a couple of folders shared, but I have been unable to share any folders which are on my external harddrive. After entering the path in my smb.conf file they appear on the network but I am unable to navigate to them. When trying to navigate to them through the network folder on the pc they are actually connected to I get an "Unable to mount location: Failed to mount windows share" dialog box. On the windows pc I am trying to share with I get, "Windows cannot acces \Josh-Desktop
ame of folder"
My smb.conf file looks like this:
That folders I cannot access are Music and Videos.
How do I configure my Debian installation to mount external USB drives to mount points based on the volume names of the drives? For instance, if I have a thumb drive with the volume name of "SWORDFISH," how do I have Linux mount it at /media/SWORDFISH? I'm aware that this can be setup in FSTAB, but that requires that I know the UUID of the device beforehand and that I take the time to set each external device up in FSTAB first. That does nothing for me when I have a thumb drive that has never been plugged into my computer before.
This seems to be setup by default in Ubuntu/Kubuntu, but is not working for me with a fresh installation of Debian Squeeze and KDE4. I've spent the past 2 hours Googling for a solution and have turned up nothing. UPDATE: My results are inconsistent. Sometimes Debian mounts devices to mount points based on the volume names, and other times it gives them generic mount points (e.g. /media/usb1).
Error mounting: mount exited with exit code 32: mount: wrong fs type, bad option, bad superblock on /dev/sdb1,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
I get this when I try to mount this drive. I was working just fine and then when I tried to mount again to pull some data off It gave me an error. It is an internal hard sata hard drive hook up via usb with a usb to sata converter. Is there some kind of disk check i can do to find errors. There is data on there I would like to keep
How to mount external drive in Lubuntu?
View 3 Replies View RelatedI am the owner of a netbook (Namely, the Acer Aspire one.) With Ubuntu 10.10 netbook edition. I also own a External Usb CD drive. My question is, how do I mount it? K3B seems to find it. Sound juicer doesn't. Rhythm-Box doesn't.
View 3 Replies View RelatedI am having problems mounting an iso on my external hard drive. I do not want to move it onto my linux partition because it is 3.6 GB. I have a directory made (/media/iso) that I would like to mount it in, but if that doesn't work then I don't care where it goes. After I mount it I want to be able to run it using Wine, but that will come later. For now I just need to get it mounted. And, of course, I am fairly new to linux/ubuntu.
View 2 Replies View RelatedI've been checking the Forums and I can't find anything similar to my problem yet. I have 2 external drives that my UBUNTU 9.10 doesn't recognize, although I can see them perfectly in Win XP.I was using them in Ubuntu until 2 weeks ago, when this problem started and I can't find a way to see/mount them again. GPARTED doesn't find any of them; and when aply fdisk -l, can't see them either (only my internal HD).
View 2 Replies View RelatedI run 10.04 lucid in a laptop with EXT4 as filesystem, and I tried to mount an external hard drive from a Windows that, obviously, uses FAT32. Its the first time I try to mount a hard drive (external) since the upgrade to 10.04. Do I have to download some packages via synaptic? If not, what do I have to do?
Plus, I have run
Code:
sudo fdisk -l
and this is what I get
[Code]...
I've got an external drive that is formatted using the FAT32 filesystem. My fstab file contains the following line:
[Code]...
I recently wiped and re-installed Ubuntu on my system Lenovo Thinkpak T510, now running 11.04. Before formatting my hard drive, I backed up all my information to an external USB Seagate FreeAgent Drive, which I reformatted to ext4 before copying my data there using a rsync command. After reinalling the operating system, I'm no longer able to get the drive to mount. I'm not quite sure what's going on. Here are the results of a fdisk command:
Code:
$ sudo fdisk -l
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[Code].....
I'm not able to mount the drive from my mac either. Did I do something wrong when backing up my data and loose everything (fortunately, most of it is also backed up elsewhere, just not all in a single place), or is there something else I can try to get it back?
Having issues while mounting my 1TB passport USB drive. When running this command....
Code:
sudo mount /dev/sdc /mnt/WD/
I got this error: mount: you must specify the filesystem type I even tried adding the filesystem, which was or is ext4
Code:
sudo mount -t ext4 /dev/sdc /mnt/WD/
Getting a different error instead:
Code:
mount: wrong fs type, bad option, bad superblock on /dev/sdc,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
I should mention that this was working just a few hours ago. There was a power glitch and my Ubuntu headless server lost power. I turned it on and since then, I am getting this error. I would prefer not to format via GUI .... 1st because I have data there , 2nd, because I don't want to rely on a graphical interface but being able to fix this via terminal.
I've recently started using a 500gb external hard drive for music and backups. It is always plugged into the computer but doesn't always mount at boot-up and I have to dis-connect and re-connect the USB cable. The desktop icon then appears.The fact that it's mount point changes also means I can't share the Music folder on the external hard drive via Samba (WinXP machines say they can't access the folder) and also Songbird 'loses' the tracks.
How do I permanently mount the external hard drive? I assume it will mean some editing of the fstab file? Unfortunately, I've got no idea of what I should enter on there.The external hard drive volume is called 'Music and BackUps' - Gparted screengrab attached.
I recently reformatted my external hard drive. Somewhere along the way I think my fstab got messed up because now my hard drive won't mount. Instead I get the following error:
Error mounting: mount exited with exit code 1: helper failed with:
mount: wrong fs type, bad option, bad superblock on /dev/sdb1, missing codepage or helper program, or other error
In some cases useful info is found in syslog - try dmesg | tail or so
If I mount it through Gparted, it mounts just fine.
My fstab currently looks like this:
ive been facing a problem lately after a week of a fresh install of 10.04i am being unable to mount my SimpleDrive external drivethe below info
optix@optix-laptop:~$ sudo fdisk -l
[sudo] password for optix:
Disk /dev/sda: 40.0 GB, 40007761920 bytes
[code]....
I have an eSata external hard drive connected to my desktop running Ubuntu 10.04 LTS. I searched around for some info on how to mount an eSata external hard drive and was not successful. Most of the posts were talking about stuff after the drive has been mounted.
View 4 Replies View RelatedI have some documents that I need to copy from my old disk that has Fedora 9 on it. I bought external usb case for 2'5" disk but when I connect it through usb cable I can only hear it running but there's not much of the auto-detection.
View 9 Replies View RelatedThe solution may to my problem may exist elsewhere, but I had trouble searching/finding it.I just bought a new external drive. The drive is formatted as ext4. I use it mainly in esata mode. Whenever I connect it, it mounts to /media/[UUID], where "[UUID]" is the UUID of the drive. I want it to be located at /media/backup when it is inserted, not in relation the UUID. I have tried putting a new line in my fstab (mount by UUID to folder) to mount the drive. It mounts correctly if the drive is connected to the computer and turned on during startup, but if the drive is off/not connected during startup Ubuntu barks at me. (I press 's' to skip mounting the drive) Is there a way to make external/removable drives mount to a certain location other than /media/[UUID] when they are inserted? I want the drive to mount to the folder while the computer is running, not only during startup.
View 3 Replies View RelatedBeen using a SeaGate FreeAgent external drive for past 6 months. Suddenly the ext2 partition (/dev/sdb2) won't mount, while the NTFS partition (/dev/sdb1) does.I've been allowing automount, no entry in /etc/ fstab.When the NTSF partition mounts there appears an entry
View 7 Replies View RelatedI finished installing Lucid (Ubuntu 10.04) on two desktop PCs formerly running Windows XP. Both installs went like a charm.Machine A has an external USB drive connected to it that I previously used for MS Windows backups. I can see the contents of the external drive from A's "file explorer" and navigate its directories. I would like to have machine B auto-mount A's external USB drive.A while back, I did something similar with a RedHat host that would automount a connection to an external USB drive shared by a MS Windows machine. My "/etc/fstab" was updated to mount a CIFS share.
I used CIFS since RedHat does not support NTFS, which is the format of USB drive. It worked perfectly.Can I do the same thing or is there a simple way? I am thinking that I may need to setup NFS server and client but I am not sure.Is there a how-to on NFS and Ubuntu?
I have an external usb connected floppy drive that I cannot mount.#fdisk -1 does not show the drive, in my ignorance I thought that it being a usb it would be recognized the same as flash drives and my external usb ide hdd are recognized.The drive does work, I have tested it in windows computers.Does the floppy need special settings?This may be related or it may be another issue totally:The floppy is recognized in gparted although I cannot format the disc to fat16 or fat 32 as they are greyed out.
View 5 Replies View RelatedI have a new install of debian on my laptop. When I plug in my external hard drive (usb) I get the message. Invalid mount option when attempting to mount the volume 'External Drive'.
View 7 Replies View RelatedI have WD external 1TB USB 3.0 drive that I want to attach to a RHEL 5 computer. I don't want to format it to a FAT32 as I'm copyong over about 530GB of data. What is the easy to get the RHEL OS to recognize this drive? NTFS is not loaded on this system as I already checked.
View 3 Replies View RelatedI am trying to recover files off a 3.5" IDE Hard Drive that had Windows ME installed on it. I have access to a MacBook, Windows XP Desktop PC, and a cd with Ubuntu 8.10 on it.
Attempts:
1) If I make the HD the only primary master HD it won't boot up.
2) If I make it a slave drive it won't boot up.
3) I purchased an external enclosure from Radio Shack which turned out to be crap and online reports supported this conclusion. I got nowhere with that thing. Bestbuy doesn't sell 3.5" IDE enclosures.
4) By using an IDE / SATA to USB kit, I am able to connect the HD to the PC via USB cable. XP will detect the drive, however the HD will not my displayed under "My Computer" nor "Disk Management".
Onto linux (this is where I grabbed the Ubuntu cd):
5) When connected, the HD will show up under "Computer" as a "USB Drive". When I double click on it I get the error "Unable to mount location Can't mount file".
Allow me to show you some commands I ran:
Code:
Code:
Code:
I wanted to make a clone of my drive, so I tried the ole sudo dd if=/dev/sda1 of=/dev/sdg1 trick, but first I formatted the drive to the Ext4 format. I wish I would have understood that format a little more before I decided to format it that way. Now I can't access my drive at all. I read almost everything on the net about manually mounting it, but almost everything was in Fat, NTFS, or Ext3/2 format. I even read the Ubuntu documentation. I don't know if it's because my drive is in Ext4 format, or if I'm just not doing something right.
As you can see in the following picture, it recognizes the drive, yet I am unable to mount it. I am trying to access the 160 GB drive. I even tried to see if Windows would recognize it. No go. Today while lurking in the Ubuntu Forums I found a way to make a live .iso of my system (which I think is awesome). So now I want to reformat my drive and use it as storage once again. I think I will restore it to NTFS. I thought that the Ext4 format would work better in Linux (which I was wrong), but now I need Windows to recognize it as well, and it needs to be able to store files bigger than 4 GB (unless you have a suggestion on what to format it as).
how could I mount a Toshiba external hard disc drive to my Ubuntu 9.04?
View 3 Replies View RelatedI upgraded Ubuntu 9.04 to 9.10 desktop a few weeks ago and an external USB drive that was mounting at startup on 9.04 is no longer mounting on 9.10. If I unplug the USB cable and plug it back in it comes up. The issue is strange in that when a regular non-admin logs in the drive auto mounts but does not for an admin login. I have not been able to put together search results that would lead me to a hint of why this would occur and/or what aresolution may be.Why would the drive auto mount when a regular user logs in but not auto mount for an admin? When I say admin I guess what I mean is a user with more privileges such as member of the admin group.
View 2 Replies View RelatedI have an external hard drive that is connect to my laptop through USB port. But it won't show in my folder. I've looked every where but could located.
View 1 Replies View RelatedI;ve been using Ubuntu (10.xx) for a few months now and am really getting the hang of it.My NAS drive has now failed.It is a WD Mybook world edition 1tb with the blue rings.The drive spins fine and in windows I can see the partitions but I understand the file system is linux based.Can anyone help as to how I can mount the drive and recover the files using ubuntu / linux.I have a USB caddy to connect the SATA drive to my laptop.
View 9 Replies View RelatedI would like to mount a (permanently) attached external USB drive so that it is writable by multiple userids. Currently HAL is mounting the drive as writable to my owner user and readable for group and others. My m/c also runs as an FTP server and I would like said FTP server to be able to write files to the external drive. Just being able to specify a gid would probably do the job for me.
I have googled HAL and UDEV and also attempted to configure usbmount to do this, all to no avail. I am running SLES 10.3. So in summary, can I & how do I either make HAL mount the drive with gid=nnn, or should I not use HAL and simply make an entry in /etc/fstab and make sure a I get the same device address for this USB drive each time I boot?
