Lighttpd works correctly under debian, but not Ubuntu 10.04. Lighttpd does not start automatically, and when I try to start it from the command line, I get: lighttpd "No configuration available. Try using -f option"
View 3 Replieswhat the procedure is to file bugs against slackware so I will post here. The rc.lighttpd I have works but the function to check if lighttpd is running has an exception when there's no lighttpd.
View 2 Replies View Relatedthe questions is how to get per directory config working for lighttpd? so far from googling i've seen people trying to use conditionals to match certain rules for a vhost , but i don't think that messing around with the main config file for each directory/vhost/whatever is such a good idea.
More importantly , i'm looking for a standardized method to achieve this which would work by simple putting an htaccess-like file into a directory and do the magic. i'm not interested in maintaining apache htaccess syntax , only to get the per directory config to work regardless of the syntax used.
I have been searching in the forum and google but still not lucky enough to figure out yetI have a lighttpd server runningbecause apache consume so much CPU and memory) andqmailtoaster (just setup).Here is the configuration in cgi modules:
Code:
cgi.assign = ( ".pl" => "/usr/bin/perl",
".cgi" => "/usr/bin/perl",
[code]....
I can not get lighttpd to work correctly. I keep getting the error:Quote:lighttpd "No configuration available. Try using -f option"
View 3 Replies View RelatedI'm trying to get wordpress to work with lighttpd and my home test server... <name>.dnsalias.org as my IP is not static... When I install wordpress ( via apt-get ) and set it up through install script like this:
bash /usr/share/doc/wordpress/examples/setup-mysql -n wordpress <name>.dnsalias.org It is accessible from outside of my network but not from local one where the sever ip is 10.0.0.200 From outside it is using correctly domain <name>.dnsalias.org but from inside when I try to use ip 10.0.0.200 from other pc on net it will not work..a s it still using <name>.dnsalias.org in all links... Also I would like to have it in <name>.dnsalias.org/wordpress as I have another test site in <name>.dnsalias.org/<test_Site> which by thee way works from inside and outside of my network.... its just wordpress ...
I have followed this guide: [URL] but its for apache... I spend whole night searching for some solution and now I'm dead tired and you are my last hope ...( ....Obi Wan Kenobi ) So does someone running wordpress in setup like I described above, if yes
I was using simple backup config to backup home to an external drive and it was working fine for the past week or so and today after the backup the computer was restarted and I am unable to log on. I get an error message saying. "the configuration defaults for gnome power manager have not been installed correctly "
I did some googling and the problem is that / is full. I have been trying for the past three hours to delete some space on / so that I can log on. I used ctr-alt-f1 and I can log on there but whatever command I use to delete the root trash it fails. I get an error message saying /root/.local/share/Trash/files/ is not a file or directory.
delete root trash so I can log onto this computer. I have used every variant of sudo rm -r /root/.local/share/Trash/files/ that I could find including one using Chmod. I have already tried the commands found in this tutorial [URL]
I also reinstalled gnome but that did nothing.
I just tried to start up Ubuntu and got the following error message. "The configuration deaults for gnome power manager have not been installed correctly. Please contact your computer administrator."
I then get a black screen, with the menu bar at the bottom, and a choice of who to log in as. No matter who I choose I get the same error message and then it takes me back to the same screen. It also gives me the choice of what session to use but again, no matter what I choose it just takes me back to the error message and the same screen. I am running Ubuntu 10.10 on an Eeepc 901. I have the Netbook version installed, but I was using the desktop session. The last time my computer worked I ran update manager and it updated some Intel driver i think. Sorry I can't remember the exact details. Not sure if this is something to do with it.
Keyboard repeat doesn't seem to work correctly on my system (Xubuntu, 9.10). Holding a key down ends in the repeat function stopping after a certain point, and at different times each time. Also, editing text fields is tricky because the field currently highlighted reverts to its previous value if I don't hit enter fast enough (I have to type new values into a notepad and copy and paste it quickly into the field).
View 2 Replies View Relatedim using ubuntu 10.10 on a dell e1505 laptop with a x1400 graphics card. 2.5 gb ram and a core 2 duo 1.83. i also dual boot vista for lightroom only. my huge problem is that every music player i try doesnt work correctly in some way. ive tried amarok, banshee, rhythmbox, songbird (wine), exail, one with a name that started with a "g" and was long and strange. i forget the name now. i think i tried a few others too. i also have about 40k songs but ive only loaded my entire library into rhythmbox. the others i just tried with one cd.
my problem is that they either crash right away, things dont work such as the eq, or they freeze the entire pc. rhythmbox is the best i can do and it freezes my entire pc after about an hour of use...sometimes quicker.something that could possibly be of importance...i could not get 10.04 to work with my external monitor on this pc. it made the entire screen very wiggly looking. 10.10 solved that. though it does flicker every once in awhile.please tell me there is some way i can fix this...i really dont want to go back to vista.
I'm having issues with a RAID array.
Setup is like this:
Debian Jessie, 2 hard disks, each having 2 partitions: /dev/sda1, /dev/sda2, /dev/sdb1, /dev/sdb2. Partitions were paired during installation, so they form /dev/md0 and /dev/md1. /dev/md0 is the root (/) partition, /dev/md1 is for /home.
At the end of the install process, I chose /dev/sda1 to carry Grub. And I think this is where I screwed things up.
After removing one of the hard drives, there was no boot capability. So, I installed Grub on /dev/sdb, too.
Now it displays the boot menu but cannot find the kernel. This is where I got lost in the process.
Do I need to reinstall the OS or is there a way to fix it? I suppose I have to edit Grub.
I have set it up, but I'm not sure whether the admin username and password are set correctly. How do I confirm? Also, if someone has any links explaining the format of an LDIF file.
View 8 Replies View RelatedI recently installed 10.10, and I have not been able to get the gnome panel clock to work correctly. I will set it to the correct time, but every time I reboot it will be wrong by several hours. I have never had a problem in previous versions and I have always set the clock by right-clicking on the clock -> Preferences ->Time Settings. Am I doing something wrong or is there an easy way to synchronize with a time server?
View 1 Replies View RelatedI was being stupid, and didn't read the manual properly... shame i can't delete the thread!
View 1 Replies View RelatedMy ubuntu isnt working after i write my password and press enter it does nothig but gives a massage ''the configuration defaults for GNOME power manager have not been installed correctly'' the recovery console doesnt work too(same problem) the problem appeared after i installed bittorent client called smth starting with 'd'.
View 4 Replies View RelatedI started to use Debian Live about three months ago. I can't get snapshot to work correctly. Each time the system boots or shutdown, the system over-writes the persistent file. I'm currently have to use the live-snapshot command to make a snapshot. Make a copy of the file for a backup. Then I have to boot my system and make a copy of the backup and rename the file the correctly. Turn off my laptop (not shutdown). then restart it for the persistent to work. Must be a easier way.I have three partitions: debian-live (/dev/sdb1), live-sn(/dev/sdb2), and home-rw (/dev/sdb3) on a 8 gig usb flash drive.
View 1 Replies View RelatedOpps should raed GNOME power manager problem, but im sure you all guessed.I get an error when i try and log in.The configuration defaults for GNOME Power Manager have not been installed correctly. Please contact your computer administrator."I did try and follow the advice on other threads but nothing works so far.
I have an eepc- no cdrom drive.Right now im in malaysia so i dont have anyone to help me out. If you have any suggestions make them simple please i dont care if i loose everything on my computer just need it to work again
After the upgrade, I've noticed a problem I haven't had before - hibernating worked fine to the last. The problem is, although the system correctly hibernates, it makes no attempt to "wake" from hibernation when I power it up - it boots normally, and with fsck-ing like it was powered off without proper shutdown (understandably). I don't know why it happens, and I've skimmed the logs, but noticed nothing special. What could be the problem? What could I try? Which log should help someone find that out?
View 2 Replies View RelatedAfter installing Ubuntu 10.04 on an external HDD (via Live-CD), grub never shows a menu, it only goes to command line.Every time I want to boot, I have to enter these commands:
set prefix=(hd0,1)/boot/grub
set root=(hd0,1)
linux /vmlinuz root=/dev/sda1 ro
[code]....
My phpMyAdmin is showing up only a blank screen with its favicon.What kind of error is this?
View 1 Replies View Relatedhow well does rpm2tgz work? do the packages converted always work correctly? or is it hit-and-miss like with alien?
View 8 Replies View RelatedIs this a beta version or something? I installed this version because it came as a live cd coupled with emc2 for cnc machining. I cannot get anything to work correctly. I tried to install Mozilla thunderbird using the application manager and it is very slow. It takes forever for the menus to open. or emails and is virtually unusable. I tried to use the startup manager and it killed my grub bootloader so I needed to reinstall. I couldnt successfully use the grub2 console prompt to log back into linux even though I ollwed several tutorials for this. I tried to install the flash player plugin and it kept telling me still to install it before I could watch flash videos even though I had installed it 3 or 4 times. I just tried to install evolution mail and it cannot log into my gmail account. I tried to install swift dove which is a faster version of thunderbird and it says it is starting but then never does. I am reasonably sure I should hang in there as I have heard Ubuntu is very good as an os.
View 9 Replies View Relatedi installed debian 8.2 with gnome 3 desktop environment when i run this command
Code: Select alldconf write /org/gnome/nautilus/preferences/default-sort-order type i got this error
Code: Select allerror: 0-4:unknown keyword
Usage:
dconf write KEY VALUE
Write a new value to a key
Arguments:
KEY A key path (starting, but not ending with '/')
VALUE The value to write (in GVariant format)
what should i do ?
also when i use gsettings i get
Code: Select all(process:4333): dconf-WARNING **: failed to commit changes to dconf: The connection is closed
I'm resuming here (after suggestion of malcolmlewis) my problems with Bluetooth and Smeegol. May be there is out there someone able to give some advice. TIA.
My setup: Samsung N150 (Atom 450), 2Gig ram, Suse 11.3 - Smeegol 1
The problem is:
From the netbook (Samsung) i see the available bluetooth advices and can even configure them but doing file research ON that devices is not possible. I can only send files to, but not get files from there (e.g. Nokia cellphone or PB G4 running Debian). Now, i think (but not sure on this) in Smeegol the administration of bluetooth is done by the connman (as i understand a connection manager developped by the Intel Open Source Group which was responsable for Moblin as well (?) ) and so, it might be a defect. of that connection utility.
So, i installed blueman (i know from other devices i use, runs very fine and stable in Debian) but with blueman i got this error, when i tried to access the other devices by bluetooth:
Could not display "obex://[00:25:48:3A:A9:58]/". Error: DBus error org.freedesktop.DBus.Error.NoReply: Message did not receive a reply (timeout by message bus) Please select another viewer and try again.
Then, after suggestion of malcolmlewis, i installed bluez-hcidump and tried as root in a terminal: hcidump. The "result" was:
HCI sniffer - Bluetooth packet analyzer ver 1.42 device: hci0 snap_len: 1028 filter: 0xffffffff
and then the process froze without any additional info (even after an hour i didn't get back to the terminal prompt!).
And here, i'm out of any further idea. Might be a bug in Smeegol, as someone suggested. Would be sad (since that feature of bluetooth is pretty much essential for me, since i often use the phone to take occasional photoshots i need for my work) but good to know as well. Would be even better if there would be a workaround .
trying all sorts of xorg.conf settings and searching out drivers. Out of the box, Debian moves the cursor when I touch the screen and move my finger across it. The only problem is that it doesn't process it correctly. It is moving faster, so it doesn't stay under it. It also doesn't land under my finger when I touch the screen.I am running a Panasonic Toughbook CF-29.Driver I am trying: evtouchHere is my current xorg.conf: Code: # xorg.conf (X.Org X Window System server
configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
[code]....
I use Wine on Kubuntu 10.10.
Whenever some-application to open the Internet, wine browser is opened in loop untill I end process tree of wine server.
Also when I use it to execute .exe program I have error
e.g. I tried to run DriverGuide DriverScan:
Quote:
Component 'Codejock.DockingPane.v10.4.0.ocx' or one of its dependencies not correctly registered: a file is missing or invalid
Does anyone know whats missing ?
I am having some trouble setting up a cron job that creates a tunnel to my remote machine to work correctly on Ubuntu 9.10. The setup looks like the following:
(1) myscript.sh (executable)
Code:
#!/bin/bash
ssh -2 -x -i /home/user/.ssh/id_rsa.prv -L 3128:myremotemachine:3128 myaccount@myremotemachine
(2) crontab -e, added the following lines:
[Code]...
I've just installed Ubuntu 11.04 on a Samsung N150 Plus for a relative who I've been trying to get to use Ubuntu for ages and want to get it as perfect as possible.I have everything working well except two finger scrolling on the touchpad it's quite buggy and skips about as I scroll with it.how to make the two finger scrolling work correctly?
View 3 Replies View RelatedMy Configuration: FC11 - Dell M1330
Issue:
- Can't get suspend to work correctly...
- What I need is to be able to either:press Fn+Esc or Fn+F1 to get the computer to suspend
Current situation:
- So last time I learned ACPI and HAL doesn't work nicely togheter
- My solution was to disable ACPI. (This gets things working, but not to my satisfaction)...
- Currently if I press Fn+F1 this calls: pm-hibernate This takes quite some time, and annoys me.
- I want to use: pm-suspend
- But I haven't figure out how...?
- If I configure power options through gnome-power-management and set the option to Suspend when I press Sleep...
I get the following behavior:
+ PC goes to Hibernate
+ When I Resume ("thaw"), this goes ok but..
+ PC goes back to hibernate automatically....
+ Need to resume to get it back up....
Since moving from centos 5.6 to fedora 15 a week ago I have been unable to get Last Pass firefox addon to work correctly. Those of you familiar to last pass will probably have seen the error message before in a variety of situations, namely "An error occurred while attempting to contact the server. Please check your internet connection." This error appears as soon as you log in (which it does manage to do) but instantly loses authentication - seems like the cookie expires almost instantly and therefore all saved sites/passwords require re-authentication with LP to use.
No network configuration has altered since the OS change, but F15 comes with firefox 4 rather than 3.6.x in centos. I know the last pass plugin should work with FF4 and have read suggestions about SSL/TLS version settings (which are 3.0 and 1.0 respectively) and disabling SELinx. Neither of these have made any difference.