Ubuntu :: Can't Connect To Smtp Server
Jul 24, 2010
I have been using evolution to send/receive email from my account with 123-reg with no problems. My home ISP is aol. I am currently on vacation in France and using orange.fr as my ISP. I can still receive email from 123-reg but when I try to send, get the error message "Could not connect to smtp.123-reg.co.uk: No route to host" 123-reg help seem to be either clueless or not bothered. I've tried altering settings in evolution preferences, but nothing seems to work. Currently set to "server requires authentication"
View 6 Replies
ADVERTISEMENT
Jul 12, 2011
I run my own mail server. There's only one part that isn't working and I can't seem to figure out why: sending mail from a client - in this case, Thunderbird.
I can send mail off-server just fine if I log in via telnet. I can receive email just fine with Thunderbird.
Here are my relevant configs:
/etc/postfix/main.cf:
Code:
queue_directory = /var/spool/postfix
message_size_limit = 102400000
mailbox_size_limit = 1024000000
command_directory = /usr/sbin
[Code].....
View 3 Replies
View Related
Oct 23, 2010
Try as I might I cant get postfix to send emails through an external email server (I can succesfully get client software to do it no trouble) After following the howto at:
[code]....
I get 5.0.0 errors re:
Code:
May 6 16:06:32 SERVER1 postfix/error[20357]: 2392F21438: to=<SOME_ADDRESS@hotmail.com>, relay=none, delay=0.17, delays=0.1/0.01/0/0.06, dsn=5.0.0, status=bounced (smtp.live.com)
Here's my main.cf
Code:
alias_database = hash:/etc/aliases
alias_maps = hash:/etc/aliases
append_dot_mydomain = no
[code]...
I get basically the same error no matter what smtpserver/username/password combination I use leading me to believe its my setup and not my username/password
View 1 Replies
View Related
May 5, 2010
Try as I might I cant get postfix to send emails through an external email server (I can succesfully get client software to do it no trouble) After following the howto at: [URL] I get 5.0.0 errors re:
Code:
May 6 16:06:32 SERVER1 postfix/error[20357]: 2392F21438: to=<SOME_ADDRESS@hotmail.com>, relay=none, delay=0.17, delays=0.1/0.01/0/0.06, dsn=5.0.0, status=bounced (smtp.live.com)
Here's my main.cf
Code:
alias_database = hash:/etc/aliases
alias_maps = hash:/etc/aliases
[Code]....
View 5 Replies
View Related
Nov 27, 2008
I have a domain name registered in asianet.com, they provide email service also, can i use local mail server and registrar's smtp server at same time?
View 5 Replies
View Related
Oct 2, 2010
Having my Diploma Final Project on setting up a virtual mail server within Local Area Network (LAN) only. I had follow this how-to [URL] and complete up to squirrealmail web mail. I added two new user to try on sending and receiving mail. It works. I run CentOS on VMplayer. I using my laptop to do all the stuff, the laptop default OS is windows 7, I install VM player on it and run CentOS inside the VM Player.
I want to do testing on Windows 7 side by installing Thunderbird email client program, I want to connect to mail server with SMTP, IMAP/POP3 using the email service. I have problem while setting up user account on Thunderbird, Thunderbird seems like cannot detect my CentOS mail server. How? Do I have to do any other configuration on CentOS? Any DNS? Port number for IMAP, POP3 or SMTP?
View 1 Replies
View Related
Jan 31, 2010
In order to have greater control over the emails sent out the company I imagined the following scenario.ScenarioDescribing in words what I need.ser sends an email to user@hotmail.com for example, using the smtp of my isp (is the internet).Before the email is sent, the firewall checks if the recipient is blocked transparent, if you are locked out rejects the email.I searched several forums and mailing lists, but did not find scenarios similar to mine.Where found situations in which the mail servers were internally in the company, which is not my case.
View 2 Replies
View Related
Apr 6, 2011
is that my isp's smtp service is very poorso i want to configure my own smtp servr for my internal clients only for sending emails not receivingi have static ip on my router with 25 port forward i have configure sendmail on linux its working fine on local network mean its sending email on local domainnow i want to send emails on other external domains with my public ipMean user of mydomain.com should be able to send emails on all internet domains like yahoo.com, hotmail.com etc
View 8 Replies
View Related
Apr 2, 2010
I have installed a linux server in my office to run 16 machines. Its main use will be a internal mail server but will be also running websites.
I have installed Ubuntu 9.10 server x64 and have got apache running.
I am looking for the simplest more robust solution for smtp, pop3 and imap. I have only ever used qmail before and found it a pain to configure and its getting old so I though I should probably try something new. I have not much experience with running pop3 or imap on linux so would love a suggestion on that.
View 4 Replies
View Related
May 24, 2010
I am working on linux server with below specifications.Linux EDT 2008 i686 i686 i386 GNU/LinuxWhile checking the status of the server using the command 'opmnctl status' and when server is down the output is not getting redirected to file.I m using the command as,opmnctl status > abc.txt.
View 2 Replies
View Related
Sep 19, 2010
for like two weeks I have been trying to send email using evolution for some reason I always get the same Code: Could not connect to smtp.gmail.com: Input/output error
View 6 Replies
View Related
Nov 26, 2010
my postfix to send and recive external emails, but many recive in trash folder.Other programer say me that is need some configurations in postfix with and dovecot to work, but i dont know what!This is my first time configuring a linux server at this week.
my main.conf
sample_directory = /usr/share/doc/postfix-2.3.3/samples
readme_directory = /usr/share/doc/postfix-2.3.3/README_FILES
[code]...
View 3 Replies
View Related
Apr 7, 2011
Im not able to find good response on this from google, urgent help required.
While im looking at my smtp server log at /var/log/maillog, im having these two errors for which im unable to find the reason.
1)Could not open inline file /etc/MailScanner/reports/en/inline.sig.txt, No such file or directory
2)did not issue MAIL/EXPN/VRFY/ETRN during connection to MTA
View 1 Replies
View Related
Jun 24, 2011
I've got an uber simple test mail script in php on my awesome new dev machine running Ubuntu:
PHP Code:
Unfortunately, something is preventing mail delivery. I can't tell from this error log whether it's the remote machine rejecting me or whether it's my machine rejecting the self-signed cert on the remote machine:
Code:
I'm wondering what I could change in my postfix configuration to remedy this problem.
I tried setting smtp_tls_security_level = may = may but this did not change anything.
View 10 Replies
View Related
Jun 19, 2010
Somewhere out there there has to be someone that can help me set up my lamp server to send automated emails using my cable providers SMTP server
View 2 Replies
View Related
Apr 10, 2010
I'm trying to configure Postfix with a mail server that I programmed in C. The main.cf is set in this way :
Code:
relayhost = [myMailServer.localhost]
smtp_sasl_auth_enable = no
smtp_use_tls = no
disable_dns_lookups=yes
smtp_never_send_ehlo = yes
code....
I don't know why it doesn't receive response after HELO. In fact if I debug my mail server with gdb, I can see it sends a 250 response code. Moreover, I've tested my server both with traditional mail clients, as Thunderbird, and through telnet session and it works very well.
View 6 Replies
View Related
Jul 3, 2010
I have a server that runs on a static IP address with many hosting accounts. I am using the IspCP to manage the different sites. When a mail is sent, the headers include the box's own domain name: [URL]. Now [URL] is no longer active, so if an email from another account: [URL] sends mail, there is possibility that this mail is rejected by the receiver, if the receiver system does rDNS.
The receiving server will check the headers smtp sent from [URL] and come up as a fake, because [URL] is no longer registered. I wonder if there is a way to make the smtp headers reflect only the domain name that sent the mail. Then if joe sends mail, the server should replace[URL] with [URL]. If this is possible, then users that send mail will not get bounced because the rDNS lookup will map [URL] to the ip and the mail will be accepted.
View 2 Replies
View Related
Apr 1, 2010
we have qmail server installed on rhl 9. it was working perfectly fine for last 1 year. suddenly it stopped accepting emails from internet. when i telnet on port 25 it takes about 90 secs to show the SMTP ready state.I have tried many things
1. stopped Reverse DNS Lookup by adding -H to qmail-smtpd/run file
2. stopped spamassing and AV
3. reverified DNS server settings in resolv.conf
4. dig is resolving dns query properly.
i also observed that when i do telnet to
telnet localhost 25 response is very quick
but when i do
telnet local_server_IP_address 25
it takes aprx 90 secs to show me SMTP ready messege.
can someone shed some light on this as what should i do next to rectify this problem..
View 1 Replies
View Related
Apr 4, 2011
I come back to everybody cause I don't find an explicit how to do this!In our internal network, I've created an email server with Postfix and Dovecot. (Just for internal domain, no needed to go outside)
But I've some server which use linux too. All are on CentOS 5.5.I would like to configure these servers to use my internal mail server for send email, and not configure sendmail or postfix on each server.
What I've to do exactly on each servers to use it? I search on the web but I don't find something very explicit
View 3 Replies
View Related
Jan 31, 2010
I've got a server set up with Debian. The problem is that my ISP doesn't allow usage of port 25 (as I understand a lot of ISP's don't).I have PHP scripts hat use the mail() function to send e-mails through the Sendmail application.So, my question is: How can I relay messages sent to sendmail to an external SMTP server (like Google Mail, for example)? Would this be easier to do in the PHP configuration, or on the Sendmail side of things?I've used PEAR extensions in PHP to achieve this before, but scripts downloaded from the Internet generally just use the basic mail() function, and it would be a real pain to modify them all.
View 2 Replies
View Related
Apr 18, 2011
I've configured postfix on my linux server. For the most part, I got everything working (IMAP, apache, etc) but for some reason, I can't get postfix to work remotely. Postfix works locally to send mail. E.g. when I telnet locally to port 25. However, when I try to telnet from outside, the connection closes almost immediately. I've looked at various configuration options and tuning enhancements but found nothing helpful. Here is my config:
Code:
main.cf:
#See /usr/share/postfix/main.cf.dist for a commented, more complete version
# Debian specific: Specifying a file name will cause the first
# line of that file to be used as the name. The Debian default
[code]....
View 4 Replies
View Related
Apr 19, 2010
I have been having trouble figuring this out. I have a machine running CentOS 5 and I want to setup an SMTP server behind a router on a home broadband connection. I've read many guides but nothing too specific as to what I need to do. I want to use either sendmail or postfix, but I don't know if I should purchase an SMTP relay. If anyone could point me in the right direction it would be great. I also have bought a domain name that I want to use, but I just cant put all these pieces together as of right now.
View 5 Replies
View Related
Jun 9, 2011
I have postfix relaying email to the internet for my LAN I need to configure postfix to trust only one SMTP server to relay his emails to the internet
View 4 Replies
View Related
Apr 5, 2010
How can I verify if TLS is working for SMTP? I can see when I connect to Dovecot via IMAP4, a TLS session is present but I don't know to configure TLS for SMTP (sending messages).
View 5 Replies
View Related
Dec 13, 2010
I am using the Postfix SMTP server for sending emails. However I just did a default installation and subsequently someone is sending spam using my SMTP server. I would like some help on securing my Postfix server and to block these mischievous emails being sent from my server.
View 2 Replies
View Related
Mar 10, 2011
I was wondering that if its possible to send mail using my own localhost mail server, I guess I made the settings using yast2. I am not sure that I did right setup. And if I did setup my mail server correctly.
View 1 Replies
View Related
Aug 11, 2011
What is the simplest way I can get a secure, authenticated SMTP server running on my Linux machine so my family can use it to send mail from hostile networks?
Currently I have exim bound to 127.1:25 so if I can send mail from my laptop using ssh -L2525:localhost:25 wolever.net... But I'd like exim (or some other SMTP server) to bind to, eg, 0.0.0.0:2525 and accept authenticated SMTP connections.
View 1 Replies
View Related
Feb 25, 2011
I tried setting up evolution mail incoming worked fine outgoing Big No, so I install Thunderbird and it worked like a charm. Then I decided I liked Evolution a little more and wanted to see if I could get it working and came across this. Firstly I entered all my details correctly double and triple checked. Look at my user name now when i try sending an email I get this? Why has my email changed?
View 5 Replies
View Related
Jan 5, 2010
I have a user that is reporting the following error on a bounced message:
Quote:
smtp;554 5.6.1 Body type not supported by Remote Host
He is forwarding emails from his exchange server to a recipient in Germany relaying through our smtp server using Surgemail as the MTA.
He called a senior tech specialist at Microsoft to get help thinking the problem was on his end (exchange server). According to this "specialist", he said the problem was that our smtp server was not advertising 8BitMIME in its 250 statement. I tested this myself by log in on to the smtp server and doing typing the following:
Code:
EHLO localhost
250-smtp.<mycompanyname>.com. Hello localhost (127.0.0.1)
250-AUTH PLAIN LOGIN
250-DSN
[Code]....
As you can see, 250-8BITMIME is not listed here. From the bit of research I made, I found that most MTAs send this by default. Is it possible that the characters from the German language are causing this problem?
NOTE: This problem did not exist or was never reported until now. No one has made any changes on any settings on the server.
View 2 Replies
View Related
Apr 14, 2010
CentOS: 5.4
Exim: 4.63
I want to setup Exim to only allow sending mail from the localhost and externally with Plain authentication. I know I should use TLS but not all software supports TLS, I want Exim to use its own userpass file not the local system. I have spent a few days trying to get this setup, so far I have followed this: [URL].... But unsure what to change to remove the need for TLS.
[code]....
View 2 Replies
View Related
