Im using Ubuntu 10.4 LTS. New user. Looking for a CRM that is comparable to ACT, BCM that is in MS Office, or Sugar like that does not require a server. Need something light for stand alone CRM.
View 1 RepliesI have 2 servers each one with a RAID and I want them mirror they data so if one of them goes down the other one take the job with out disruption. I've heard of multipath by I want to know it in detail or learn of more options.
View 2 Replies View RelatedWe have two CentOS 5 servers in production (web and database). We are setting up a single staging server that will mirror the configurations of these servers as closely as possible. What is the easiest way to ensure the exact same software and configs as the production servers are setup on the new staging server. Our contracted data center provider has already informed us that they do not perform images and NO we do not have physical access to the machines. It is undetermined whether we will be virtualizing the staging server into two virtual servers yet, so for the purposes of this post lets assume we are not. I'm seeking a faster/more precise method than doing this by eye and hand.
Some information on our web server code...
We are using Linux as our database server and Microsoft Sever 2008 as our file server. Both are on independent servers. We would like to be able to mirror each server on the other for disaster recovery purposes. I am completely new to Linux.
View 3 Replies View RelatedI used to use super + x to open guake terminal. But now, in natty, super (solo) key is mapped to the unity launcher. How can I change that?
View 2 Replies View RelatedI have a project I'm working on. And I have a Gateway solo 1450. So I am going to put a copy of Xubuntu on it. Does anyone here know how to launch a LiveUSB on a Solo 1450?
View 2 Replies View RelatedI'm running Red Hat Enterprise Linux ES release 4 (Nahant Update 6).
I've created a mirror of a Logical Volume with this command:
# lvconvert -m1 --corelog /dev/datavg/data /dev/dm-16
Now I've this:
# lvs -a -o name,copy_percent,devices
LV Copy% Devices
data 100.00 data_mimage_0(0),data_mimage_1(0)
[data_mimage_0] /dev/dm-11(0)
[Code].....
My goal was to remove devices dm-10, dm-11 and dm-14 from my VG, so I decided to extend the VG with dm-16 and mirror my data LV to that device, then split that mirror from the other devices. The FS is mounted and need to stay online...
My requirement is to install Ubuntu SERVER 8.04.3 LTS on a Dell 2550 machine.
Problem.
- Bug in ubuntu (desktop and server) stopping CD install on this hardware platform. It hangs half way through and is something to do with the SCSI CD drive. Lots of stuff on the net about it, but no fix as far as I can see, at least nothing that works for me.
- So, tried boot off CD and then used F6 and added a cdrom-detect/try-usb=true line together with putting a USB with the ISO burnt onto it in the USB port. Still hangs during install (can't see USB perhaps? USB not correctly burnt? Tried many many times though, and eventually gave up at 2am)
- Next tried PXE boot. Now getting somewhere. Ok I installed tftpd32 on my windows machine, and copied the netboot files from the ubuntu site to the tftpd directory. (I dont think this will help me install the server, just the desktop??) Anyway, it booted from the win tftp machine (wahey!), and went through install, BUT when it tried to find the mirror site it couldnt. In fact it couldnt find ANY mirror site. (Internet access from windows and all other PCs on the network is working fine).
So, to ensure I am installing the SERVER version, and to use PXE boot, and to NOT use the internet to download the files (i.e. load them up locally somewhere), what do I do?
I have a remote drive mounted on my system(ubuntu 10.04 x64), and i have the contents of that drive backed up to dropbox. the problem is, if i unmount the drive, the files disappear from dropbox. is there a way to mirror the contents of the network drive to a localfolder(preferably in such a way that all changes and file deletions are changed on the local folder instantly, but unmounting doesn't delete it all)? It looks like rsync would work, but im not sure how to make it work.
View 2 Replies View RelatedServer A is running Centos 5.5, Server B is running Centos 5.5.What is the simplest way to grab the package list from Server A, and use yum/rpm to make sure that the same packages are installed on server B, and if not -- install them?
View 1 Replies View RelatedI am building a new server to replace a MAc server. I want to use CentOS. I don't know how to view the software in the ISO's; I don't know what version I will need to get these versions:
Apache 2.2.8
MySQL 5/0.45
PHP 5.2.5
I have posted this in the CentOS forums. But I need an answer ASAP.
I have a server, running Centos 5 and it is working fine. Now I want to have another server (server2), mirror of my current server (server 1) if any time my (sever 1) stopped responding, (server 2) should start working until I fix server 1.
View 1 Replies View RelatedI'm a complete Linux newbie - only installed it yesterday, and have spent hours trying to get my M-Audio Firewire Solo sound card to work. I can hear nothing at all. I know nothing of Linux, but am willing to learn. While I learn though, it would be nice to listen to a little Hall & Oates. I've got to the stage where the error messages I'm receiving don't bring up any results on Google. Here's what things look like (watch out, big pic):
Those sample rate errors appear in the terminal when I start ffado-mixer. I'm running JACK with everything set as I think it's supposed to be, except that 'Realtime' is unchecked.If I start JACK running with 'Realtime' checked, it tries to launch and fails, saying "JACK is running in realtime mode, but you are not allowed to use realtime scheduling. After applying these changes, please re-login in order for them to take effect". I don't know what more it wants me to do - i've already added
@audio � rtprio 100
@audio - nice -10
@audio � memlock unlimited
to /etc/security/limits.conf, and selected the 2.6.31-11-rt kernel on GRUB bootup. I'm a member of 'audio' and 'disk' groups like'm supposed to be. Have I not got the connections right in JACK? Have I got some sample rate settings wrong somewhere?I'm not even bothered about low latency with the realtime kernel right now, I just want to hear some sound
I am looking for a solution to mirror a directory on my companys computer that runs in windows to an external ubuntu server on the internet.
View 7 Replies View Relatedhow something doesn't work. Just so I feel better (and hopefully you too), I <3 you Debian. You've worked wonderfully on many projects and experiments before. Here we go.
Gateway Solo 5300
Intel Mobile Pentium IIIe 900MHz
256MB PC100 SDRAM
Random 10GB 2.5" IDE drive (currently contains WinXP Pro)
For the very short time I could boot off the Debian 5.04 i386 CD, I'd choose the default settings to boot to the installer only to have it freeze about 3-4 seconds in. I tried a few of the compatibility options, but I can't remember which. I set up a quick and dirty PXE server using tftp32 on a Windows machine and used it to successfully boot to the Debian installer from PXE only to have it freeze in the same spot. I'm now running the installer using whatever was included on the Debian CD to modify Windows XP's boot.ini to load grub and (inherently the installer) and it is again freezing in the same spot. Ubuntu does roughly the same thing, but only gives me a blank screen.
I'm fairly skilled with Windows (been using since Win 3.1 and 6-8 years old) in the command line and graphical environment and I know enough Linux to make me accidentally type "ls" instead of "dir" when I'm in Windows' command prompt and enough to get around in terminal (apt-get, more/less, grep, pipes, make, etc). I'm sure Debian will make better use of my rather limited 900MHz proc. I'll do my best to understand the technical jargon.
The installer only manages to get to about here: (I get to type this out manually. Ignoring timestamps. Bear with me.)
Freeing initrd memory: 11977k freed
Simple Boot Flag at 0x36 set to 0x1
audit: initializing netlink socket (disabled)
type=2000 audit(1271025644.848:1): initialized
[Code]....
Googling the last few lines suggests the problem is with USB. There is no option to disable the onboard USB controller and additionally, there is no option to boot from USB. Thinking the problem might be IRQ conflicts, I've disabled the Serial and Parallel port from the BIOS in a desperate attempt to free up IRQs slightly. The CD-ROM drive can be removed and swapped with a floppy drive or extra battery. I've removed as many devices as I can, the full list of which is just the CD-ROM and PCMCIA wireless card.
I've used Ubuntu, but haven't done anything fancy with it. I installed OpenSUSE 11.1 on an old Gateway Solo 1450. It works great in Failsafe mode. When I try a normal boot, I get my background with a beautiful resolution, one or two of the icons in the lower right corner appear and that's it. Nothing else shows up on the screen!
These are my machine's specs:
1.2 Ghz. Celeron CPU
128 Kb. cache
256 MB RAM PC-133 (why I went with an older version of OpenSUSE)
10 Gb. Hard Disk
Intel 830-MG chipset
Phoenix Bios
Intel 4X AGP Graphics core
I am trying to connect IOSafe Solo external usb drive. The systems sees it then disconnects it.
View 1 Replies View RelatedI am currently running Debian on a system with 3 scsi hard drives with Raid and have an identical back up server. I want to schedule a daily "mirror" copy of the server operating system and data so that if the primary server drops I can move the network plug to the next server and be back in business. Can someone let me know what would be the best solutions for this? I am new to linux so this may be an obvious question so if it is I applogize but I have been searching through the forums and have not found an adeqate solution.
View 1 Replies View RelatedI've just set up the local mirror for my 96 CentOS 5 workstations. The mirroring script is taken from public-mirror howto and looks like this:
#!/bin/sh
rsync="/usr/bin/rsync -avHzL --delete --delay-updates" # replaced -q with -v for debuging purposes, removed --bwlimit, added -L to follow symlinks
mirror=centos.politechnika.lublin.pl::CentOS # tried several different same result
[Code]....
I tested mirror consistency by putting the mirror addres I'm syncing with, directly into repo file. Than yumex works fine. I tried several different mirrors with the same result.
I'm new here and hope to profit from your immense linux knowledge and of course to share my own experience where I can.
I'm in a student organization and we use a file server that runs linux. I can log in through ssh and copy using scp using login and password (no rsa/dsa keys because most users are windows users using winSCP and they're lacking in computer knowledge so we don't require them to mess around with keys)
However, I don't have network access everywhere, so I'd like to make a copy on my laptop harddisk of some of the folders I use most frequently. Note that I don't need it to copy files from my pc back to the remote server so I don't need two-way sync. Deleting the local copy every time and downloading a new full copy is not an option as we are talking about several gigabytes and the download speed is limited. Normally I would use Unison, however, this requires unison to be installed on both pc's and I can't install any software on the file server so this is not an option.
Any ideas on how to achieve this? I'm reasonable knowledgable about linux so I don't mind tinkering with some config files and using command line applications.
I have been tooling around with different way of getting our local Debian network mirror back up and running with different various scripts. I have tried apt-mirror which was a breeze to setup and run, anonftpsync again super easy to get rolling.
My question is there a way to make sure our Sarge distro doesn't get deleted from the mirror? A filtering command for rsync possibly?
I started to go over the script for the ftpsync (debian recommended!) and to be honest it seems way over my head due to lack of documentation that I have been able to find.
I would like to build a NAS from PC (D510MO) running Debian. I have two HDDs (one 3.5 1T and one 2.5 500G).
On 3.5 HDD I have already two partitions 100M+40G dedicated for Win7-64. Now, I want to install Debian (second OS) on this PC and to have some kind of soft RAID or disk mirror of 500G space. I am planning to create a third partition on 3.5 HDD of 500G (identical as 2.5 HDD size) in order to have a mirror 500G space.
Please send my some suggestions on where I have to install Debian; on 500G 2.5HDD or 500G 3.5HDD!Will Debian boot from both HDDs 3.5 or 2.5 after I create the mirror? What Linux soft I have to use for mirroring (mdadm)?
I'm using f12. My university has recently become a mirror for fedora packages. But i'm facing a trivial problem. I have set proxy for yum so that the packages that are not available on local mirror can be downloaded from other mirrors. But then i don't know how to set no proxy for my local server. Consequently it is not using my local mirror at all. Tell me how to set no proxy for the local mirror. I want my local mirror because it's damn fast. My proxy settings are like this (they go in /etc/yum.conf):
[code]....
I want to setup a FAI server for which I was looking for the best method of mirroring the Debian Lenny. I want to setup a local mirror with the best method available for mirroring. If it is ftpsync, please provide me some best ways of doing it. I tried ftpsync mirroring but that was not getting properly working due to insufficient I want this mirror to be accessible in my FAI setup so that I can start the installation on multiple machines and start the updates and package installation to be done from the same local mirror.
View 1 Replies View RelatedHow long does hardware Raid card (raid 1, 2 drives)take to mirror a 1 TB drive (500gb used)?Is there a general rule of thumb for this?4 hours? 12 hours? 24 hours?
View 1 Replies View RelatedI have some servers running rhel5,they are in mirror disk 2 disk there is no any hardware RAID only software RAID and they in remote place.
Assume RHEL5 hda(Disk1) & hdb(Disk2) currently in mirror, i have to install some patches in it. Before that i have to break the mirror and boot from hdb if it is successful. then i have to apply the patches to hda.
After that i have to boot from hda and check whether the latest patches updated and working fine. finally i have put them in mirror. the same scenario for solaris.
I have a local mirror at my server. How I can create mirror on DVD's for people without network connections?
View 1 Replies View RelatedI have two hard drives inside an Ubuntu 9.10 machine, each with a data partition on. What I want to do is as I save files to one data partition partition (or delete them) I want the files copying/deleted automatically on the the other data partition. I do not want to start using RAID or end-of-day incremental backups.
View 5 Replies View RelatedI'm a newbie who has just installed Maverick on my old HP box and I have to say I'm hugely impressed. I have 2x 160Gb drives in the machine, is there a utility which will let me backup/mirror certain directories automatically, whilst still being able to utilise the remaining space on the second disk?
View 2 Replies View RelatedI was wondering whether it could be added to the mirrors/repositories list. how to manually add it to my computer via software sources.I am interested in lucid PPC ubuntu ports.
View 6 Replies View Related