MY DISTRO: UBUNTU 9.10 64bit I entered IP,getway,subnet,DNS still cant connect. i am copying my network info here: Windows IP Configuration
[Code]...
can anyone tell me which data i should enter?"connected" is shown but i cant browse.
I have bought reliance netconnect broadband+ 3.1 Mbps connection. I am provided Huawai EC1260 device to make the connection.But using ubuntu 9.1 I am not able to make the connection work. I have tested the device in windows XP and it's working fine there. I don't want to use windows and desperate to establish the connection in Ubuntu 9.1.
View 3 Replies View RelatedI have problems connecting on the net with my ubuntu. My driver is Broadcom Corporation BCM4318 AirForce One 54 I can see access points and i connected to access point called Zone 9 but the problem is that i was on XP entire life and i was connecting via broadband connection that requires username & password after connecting to access point So tell me how do I connect to internet on this ubuntu stuff
View 3 Replies View RelatedI have a strange problem with my mobile broadband connection. I hope I am not the only one (so it will be fixed), but since I haven't found any others having the same problem yet, I am not so confident.I started using mobile broadband, via a HUAWEI E1762 HSPA USB stick since Jaunty. I've had the same problem in jaunty as I do now in Karmic. Although in Karmic, i've had additional problems (that problem i've found listed as a known bug).The problem is that when I get my mobile broadband to connect, it is sometimes, somehow, not fully connected. Symptoms are as follows:
1. panel icon shows connected and good strength (good)
2. skype connects, and I can chat and voip (good)
3. ping does not work (bad)
[code]...
We finally got internet in our apartment in China, but my husband was the only one home when the guy came to set it up (on his windows machine).
He connects by plugging in, then clicking a desktop icon labeled "Broadband Connection" where a box pops up with a username, a password box, and some buttons, one of which says "connect".
I am trying to figure out how to set this up on my netbook so that I can use the internet at home too. I have a feeling that even if I had been home when the setup guy came, he wouldn't have had a clue what to do with mine anyway.
On the WinXP machine: Connection Properties state that this is a PPPoE connection, with TCP/IP, QoS, and Deterministic Network Enhancer all checked. Under the security tab, unsecured passwords are allowed.
i recently installed ubuntu 10.04 in my laptop. everything is working fine except for my mobile broadband connection. i use a huawei ec1260 USB 3g modem to connect to the net. the OS detects the modem fine and the network manger applet prompts me to set up the connection as well i.e entering the username, password, number to be dialled etc. however when i actually try to dial the connection the applet icon flashes for a long while and a notification pops up saying connection disconnected. has anyone come across same kind of problem and solutions, if any.
Earlier i used the same modem in in karmic i was able to connect to net and even now i am able to connect using the modem in windows 7 as well
I have problem with connection some time disconnected using usb modem CDMA ZTE AC2726 . Can help me this option: option_instat_callback: error -108.
View 3 Replies View RelatedI use a Huawei E 1550 mobile connection, which worked fine in Ubuntu 9.10.I've got it working okay in 10.04, having installed modeswitch. However, it will not automatically reconnect if it drops out. I can force a reconnection, only if I remove the dongle and then plug it in again. Although it shows in network manager, clicking on the list entry for the dongle, just produces a disconnected dialogue message. The only way to get it to reconnect is to remove the dongle and plug it in again.I know there have been a few posts about getting mobile dongles to work in 10.04, but I can't see any solutions to this little issue yet.
View 6 Replies View RelatedHow to connect Ubuntu to the Internet through a broadband connection? I decided to give Linux a try, and I picked the Ubuntu variant. I have some problems with the Internet connection though. I have a broadband (modem-less) PPoE connection, and all the info needed in order for me to connect are the username and password (which I have).
View 2 Replies View RelatedI have a server that has the mobile broadband connection "ppp0" is there a way to turn it on and off via terminal,Ifconfig shows connections for eth0 and l0 not ppp0 till it is connected.
View 6 Replies View RelatedI have attached the screenshot of the option which I select in Windows for making the same internet broadband connection. I am unable to find the same option in Ubuntu 10.04. Till now I was using the Pppoe Dialup. But now I am unable to configure this one.
View 9 Replies View RelatedI am trying to connect to the internet from command line. i issued the command nm-tool the output is
Device: ttyUSB0
Type:Mobile Broadband (GSM)
Driverption1
state:disconnected
Default:no
capabilities:
I also issued the command sudo iwlist ttyUSB0 scan it gives this as output ttyUSB0 does not support scanning
I also issued the command
sudo iwconfig ttyUSB0 essid "MTN DEFAULT"
iT GIVES THE OUTPUT
Error for wireless request "Set ESSID" (8B1A)
SET failed on device ttyUSB): no such device
How can one find out the essid value of a broandband network? How can i connect to the internet from command line for a broadband network?
May I ask if I can share my mobile broadband connection via Wifi?
View 2 Replies View Relatedi downloaded ubuntu 10.10 for learning purpose. All goes well, i installed it successfully. The problem which i face is that when i connected my mobile broadband device, ubuntu detects it and i have succesfully made the connection. But the network Manager is showing "disable" Mobile Broadband connection. I tried to put a check on Enable Mobile Broadband but can't check it. So i can't access Internet in ubuntu. I think some offline package installation should be there to resolve the problem, or some console commands. I tried to use the (wvdial) which i use at Backtrack. but i think ubuntu did not have.
View 6 Replies View RelatedI use Nokia N900 under T-Mobile as a broadband modem. It is connected via USB. There was no connection problems under 10.04 or 10.10. Now I have installed Ubuntu 11.04, and I cannot connect any more.
Here are the log messages that I get when trying to connect:
Code:
May 30 14:32:06 ubuntu-sager NetworkManager[759]: <info> Activation (ttyACM0) starting connection 'T-Mobile Internet'
May 30 14:32:06 ubuntu-sager NetworkManager[759]: <info> (ttyACM0): device state change: 3 -> 4 (reason 0)
[Code]....
I just installed Ubuntu in my PC and I tried to connect to internet using broadband connection. I use a ADSL router with WiFi access point to connect with network and dial my username and password using my computer to connect to internet.I could so it easily on windows 7 from Network and Sharing center and Setting up new connection or network and connect to internet using broadband internet.How can i do it with ubuntu 11.04 ?
View 9 Replies View Relatedjust i installed ubantu linux 10.4 lts , how can i connect this system to internet? I have BSNL broadband (DSL modem conn to ethernet port) modal quidway wa1003a
View 2 Replies View Relatedtraffic driving removed.
View 1 Replies View RelatedI have just upgraded to Ubuntu 9.1 and now my mobile broadband connection will not work. The dongle says it is connected to my provider but Firefox is telling me it cannot find the web page. Everything was working perfectly before the upgrade!
Error message: The browser could not find the host server for the provided address.
I just installed Ubuntu a few days ago and am loving it so far. There is, however, one huge problem which is spoiling all my fun: I can't access my gmail.
I'm using a Huawei E220 USB modem with T-Mobile UK. Plugged it in and was very impressed when I could set up my connection with minimal fuss. When I try to load gmail though, I get stuck with the statusbar saying 'Waiting for www.google.com...'. All other sites work fine (including google.com), and I don't get this problem when connecting though the Web 'n' Walk software in Windows XP. Has anyone got any ideas on how I can start working this out?
I am using WINDOWS 7, in which i connect to the internet through broadband connection dialer wich requires username and password,aslo i have another connection wich is used to connect to LAN. I hav recently installed ubuntu 9.10.. Now my WIRED connection is showing established..with eth1 and following are the outputs of some coomands which might help u to identify the problem..
[Code]...
Using my usb mobile broadband dongle I am able to access the internet about 25% of the time. I am able to make a connection to the '3' wireless network 100% of the time, but often Mozilla and all other applications that rely on an internet connection do not recognise that this connection has been successfully established, and give me error messages claiming there is no internet connection.
I can't discern any pattern as to whether the connection will be recognised or not. When it isn't recognised, the only solution is to disconnect and reconnect to the network. Sometimes this works and sometimes it doesn't. Sometimes restarting the computer fixes the problem, and sometimes it doesn't. I also have access to a wireless network at uni. I have no problems using this network whatsoever. Housemates using the same dongle on Windows have no problems. I'm using an Acer Aspire one, the dongle is a Huawei e220, I'm running Ubuntu 9.10. I have only recently reinstalled the operating system and have not needed to mess around with any network settings to get the usb dongle to 'work' the way it is currently.
does anyone of you use a hauweii e160 usb mobile broadband connection? in ubuntu 9.10 it worked, but now (10.04), after the remove of /proc/bus/usbfs it wont't get recogniced as an internet-device.why should i make a symlink from kernel/debug to /proc/bus/usb/devices
View 3 Replies View RelatedI am deployed to Iraq and the Earthlink ISP here uses PPPoE to configure a connection to their wireless broadband. His english skills are pretty good and from what I gather, he's got a DSL connection that he's trying to connect me to. He showed me how he does it on a Windows machine but I can't figure it out on my ubuntu laptop. That windows machine didn't need any IP addresses or server names. It only used a username and password to connect. Of course a strong wireless signal detected was also pre-requisite.
I know my laptop works because I've had great success with it here lately, just not on the Earthlink service.I see their wireless is broadcast and I can connect to it. I just can't figure out how to post my credentials and authenticate.I don't see a way of entering my username and password because I don't know how to install (or configure) for PPPoE.I did use the pppoeconfig and got to the part where I add my username and password, but most of what's going on up to and after that, I do not have the knowledge base to use. So I figured that allowing the defaults and recommended settings would be acceptableYou'll have to forgive me if I've asked another dumb question here. I'm another one of those Linux enthusiasts who is learning and I'm just not willing to switch back to MS just to get internet while deployed.
I have a 2G Broadband service through my Ethernet cable. My provider in China has a user name and password to login to their service. I don?t have a modem or anything but the wire coming in from the outside. It is setup in windows but I can?t figure out how to do it in Ubuntu 11.04.
View 1 Replies View RelatedI'm using Mobile Broadband Connection (Huawei 180), When I plugin my RJ45 Ethernet cable, my Broadband connection is no more. I have no access to Internet. why it happens and How can i establish both connections @ once..?
View 1 Replies View RelatedWill this work in Fedora also to tweak the speed of broadband connection? [URL]
View 2 Replies View Relatedcan any one there tell me how to make broadband connection dialer on linux which ask for username and password as on windows for connecting to the internet
View 3 Replies View RelatedI want to connect to the internet on my fedora core 6 OS, i am using an adsl modem(Model no. : SmartAX MT841) which requires setting up a username and password. I am a newbie to linux, so i am clueless and just cant stop wondering what to do!
View 4 Replies View RelatedI have installed debian in my machine. I have a bsnl broadband connection. But I am unable to configure the broadband connection in my system.
View 1 Replies View Related