I've developed a simple python script which shows facebook notifications.Now I want to give my script's users the freedom to copy,modify and redistribute my script.So,I want to know that can i attach any free software license like GPL etc.Also is there any fee i've to pay to any organization in order to attach a GPL to my script.I'm a complete novice in this field so a detailed explanation will be admired.
View 1 Replies
If I want attach some images to e-mail or facebook, I can see just a names of files, usually numbers only. It is dificult to choose the right one, if I can not see prewiews. How can I do it?
View 5 Replies View RelatedIs there anyway I can make Pidgin attach itself to my tray like it's window addon? I am a PHP programer, and find myself with a lot of tabs open. While the second workspace is much appreciated by most, it's under appreciated by me as it adds a extra step between clients and work.
View 6 Replies View RelatedI've mounted a windows share in places. When I look at computer in places it shows down the left hand side. When I write an email in Thunderbird and go to attach it does not show down the left. Firefox doesn't see it either when attaching from gmail. But open office and do a save as it does see it.
View 3 Replies View RelatedI have a usb wimax wireless adapter. Some times it stops responding to commands and I have to detach and attach it again phisically. My question is: is it possible to do equvalent operation remotely, over ssh like in case with mounting/unmounting filesystems?
View 5 Replies View RelatedHow to attach dell bluetooth mouse in ubuntu?
View 1 Replies View RelatedI observed a problem with the Yahoo Mail Attachments.If I want to attach a file from a drive that's mounted (one of my windows partitions), the file who I attach to mail seems attached but after I send the mail the recipients do not receive my file. First I thought it was a mistake, but then it happened several times. Does anyone know any workarounds except copying the files who you want to send to an Linux drive and then sending it from that location?
View 1 Replies View RelatedI would like to mount a Xen image, so I can access the files in the Xen guest.
On SLES it is done like this
# open device
xm block-attach 0 tap:aio:/vm/backend.img xvda w
# Discover the attached disk
fdisk -l /dev/xvda
[Code].....
i dled ubuntu 9.10 and i got it ready on ma pc but after the setup process is done i couldnot get it attached to my LAN or internet connection i use a DHCP router wich need no configuration as it was shown problem is even my acctivity lamp on da router doesnot give any activity light btw i got some records as
[code]...
I am trying to attach shared files to a Thunderbird mail.The files are stored into a remote machine inside my LAN. The path is something like smb//:<something>But when trying to attach the file I get a permission error:"controllare i permessi di accesso al file"(trad: "check the access permissions to the file")
View 1 Replies View RelatedIf I attach an NTFS drive to opensuse 11.3, will the OS see the drive and the files?
My goal:
I wanted to install OpenSuSE and add VMware Server 2.02 on top of it. I have a few hard drives that are NTFS. I need for my Windows virtual machines to see those hard drives. So in order for that to happen, the host OS would have to see the hard drives as well.
If I start a process with nohup:
nohup WHATEVER &
then how can I see it again? I mean how to attach my terminal to it again under Linux, e.g.: Ubuntu 11.04 - just like with the screen package.
I have a question about NFS and CentOS 6.0. Here is the environment: Server running VMware's esxi 3.5 (Fully patched) 10.1.1.50 Server running CentOS 5.5 with NFS. 10.1.1.51 With the systems in the above config everything is working fine. Install a new hard drive in the CentOS server and install CentOS 6.0. Use the same IP 10.1.1.51. Configure NFS, the VM server can't attach to the NFS share.
Here is the config of the NFS server:
Firewall Disabled
SELinux Disabled
NFS installed and running.
NFS-Utils installed.
Contents of /etc/exports
[Code]...
I have confirmed I can telnet to the ports listed. Any clue why the setup with CentOS 6.0 doesn't work? Is this a NFS4 vs. NFS3 thing? Is there a way to force CentOS to use NFS3? I am pretty sure the CentOS 5.5 server is using NFS4.
i am working with ad hoc network but the problem is not getting any good documentation of how to compile c++ code then how to add the code into Tcl intrepreter and how to work with make file. i want to run my own algorithm using c++ and then want to incorporate it into tcl interpreter and then want to run.
View 2 Replies View RelatedJust recently built and setup a new PC for my Dad running Kubuntu 11.04 64bit. As always, I installed and configured the latest Firefox (v5) as the default browser and appropriate plugins such as Flash (64bit using flashaid), adblock plus, video download helper and download status bar.
Everything is running fine, except for we are unable to attach files in Gmail. Further testing returned the same results in Hotmail also.
When composing a message, then clicking 'attach file', the file browser windows as per normal. However, when attempting to navigate to the required folder to select a file, when clicking on the folder to open, the file browser 'attached' a link to the folder.
I was able to replicate this on a 2nd machine with almost identical software setup. I then tried Konquerer (sp?) on the 2nd machine and was able to correctly navigate, and attach the file as needed.
I never noticed this problem before as I use Thunderbird on my all my systems.. but am able to replicate it on 3 different systems.
I have recently acquired a HP MSA 2040 san, which they say will work with Red Hat. But I'd much rather use Debian. It's attached to a Gen 9 DL360. I cannot get the OS to see the external drives. I hope it's just me mssing something.
I have told the DL360 to keep the external control in HBA mode, not RAID, not using the hosts RAID intelligence. I think I have set the MSA to offer a couple of disks as a virtual drive. I CAN see the drives in the BIOS boot menu for the DL360, though it doesn't show the virtual voilumes on the MSA, I cannot see the MSA virtual or physical drives once Debian is installed.
I have installed multipath-tools, and the SCSCi utilities.
But no luck seeing the drives.
i have an Opensuse 10.3 server running samba and i just wanted to know how i could attach ms dos clients to samba if thats possible,i tried downloading TCP/IP software for dos but i could not find anything on the net that works.
View 9 Replies View RelatedHow can I get more information about the error?
View 6 Replies View RelatedI am trying to set-up a script that will go to the folder and attach all files from that folder to the email without having to specify name for each attached file.
Below script requires exact name of the file and then puts file context into the emails body.
cd /home/denis/Test/
mail -s "log files attached" smith_denis@ymail.com <log.txt
I am trying to ptrace a vsftpd server process on linux to be able to get control whenever vsftpd process makes a system call. I start the vsftpd process and pass this process id as command line to the following program which traces vsftpd. however, when I run the following program it just hangs and does not print anything.
#include <sys/ptrace.h>
#include <sys/types.h>
#include <sys/wait.h>
[code]....
Recently installed debian lenny.Running very well.WM: ratpoison.Suddenly, today, the internet runs much slower.ONLY ON THIS MACHINE - the parallel windows machine, off of which I was successfully weaning myself, is not having this problem, so it's neither the router nor the actual internet connection.Specifically: I can't attach a document in yahoo mail.I tried it in iceweasel, same problem, so it's not the browser.I piped the output of "top" for a minute or so to a text file, which I'm attaching.
View 4 Replies View RelatedToday I've found several attempt to access the following url on my website: [URL] After googleing a bit it seems that in some cases, using this attack, the bag guy is able to change the code in some of your files. it also seems to affect only a certain version of oScommerce. I don't use oScommerce, so I do believe that I'm on the safe side, but it's not the first time that I see some similar attempt of attack on my website. So to protect my self I was wondering if using .htaccess restriction would be enough?
Code:
########## Begin - Rewrite rules to block out some common exploits
#
RewriteEngine on
Options +FollowSymLinks
[code]....
But I do think that these rewrite string are more specificity write to protect oScommerce site. how to protect my web site from such attach and similar?
I have been a predominant Windows user for a long time but shifted to Ubuntu recently. I was just trying out a few basic C functions when i realized that the "conio.h" header file isn't included in the libraries and therefore i was unable to use the "clrscr()" function.
I downloaded a tarball which contained the necessary library and header files including conio.h. Once extracted, i specified the location and included in the program as " #include "path to the header file" ".
I still didn't call the "clrscr()" function, and it compiled successfully. Next i edited the program to call that function and it gave the following error...
How i can add new libraries in the future?
running current with 2.6.33.1-smp kernel i cant seem to get the slib slackbuild to run. it just quits without ever building the tgz. i hope i can attach the terminal output of the compile.
View 8 Replies View Relatedhow to attach a file to a mail in text mode
View 1 Replies View RelatedI can insert an image inline with mutt by using attach, then using ctl+d to make the image appear inline. However, it appears below my signature. If anyone knows of a way to make the image appear above the signature, I'd be grateful for their input. (This is with mutt 1.5.21--usually sent from a Fedora 14 machine, but I haven't found the behavior to change with the platform.)
Unfortunately, it's necessary to do this at work, for a particular daily email. The workaround is to use Thunderbird for this particular email, but I'd much prefer to use mutt.
I'm trying to use mutt to send all faxes that we do receive in a folder on an email address.
Code:
mutt -a fax.tiff -s "test 1 mutt" someone@somedomain.com < MessageBody
I always get the following error:
[code]....
running a java application in a remote site,and I would like to debug the application. I'm using jdb, and, due to network architecture, I can only use jdb do debug in text-mode. To debug in text-mode I use the command: jdb -attach remotesite: port. At this point this is ok. Now I would like to attach the source code to the jdb. I tried the command
jdb -attach remotesite: port ~/src/org/path/file.java
to attach the source code to the remote debug to. But it doesn't work. In jdb, I try the command use ~/src/org/path/file.java but it doesn't work either. How can I attach the source code to the remote debug?
I cant seem to select a file on a server on my LAN to attach to a mail
View 1 Replies View RelatedI'm using wpa_supplicant to get wireless working on my HP nc6320.Following that article how-to-install-intel-pro-wireless-3945-on-centos-linux) I was able to use wirelesssince 5.1 but when I've upgraded from 5.2 to 5.3 there some problem came with wpa_gui:[root@localhost]# service wpa_supplicant startStarting wpa_supplicant: /etc/wpa_supplicant/wpa_supplicant.conf -ieth1 -Dwext Device eth1 kernel driver name: ipw3945 [ OK ]
[root@localhost]# ll /var/run/wpa_supplicant/
total 4
srwxrwx--- 1 root wheel 0 Apr 5 20:50 eth1
[code]....
