For some reason the page [URL] is taken down, so here is the backup (in attachment)
TestingOnMacbook Boot grub2 in EFI mode
metatech
P.S. : The page is now renamed into [URL]
P.S. : The page is now moved to [URL]
Looks like 10.10 will have grub2 and so the ability to boot on efi system. I have a macbook pro 6.2.Will maverick install on this machine as normal dual boot with no need of refit support?
View 5 Replies View RelatedI've set up a triple boot system (Ubuntu Karmic, Windows Vista and OSX86 -- a patched OS X which works on a PC) on a Dell 9200 (C2D 2.13 GHz, 4GB RAM, nVidia G210). I sue Grub2 as the bootloader and update-grub picks up OS X and it boots without any problem.
However, although when booting OS X using its own Darwin bootloader, I can apply the boot option "Graphics Mode"="1680x1050x32" to ensure that I get the screen resolution that I want, when OS X boots from Grub2, the only resolution available is 1024x768 which is disappointing. I have tried adding gfxmode=1650x1050x32 to the OS X section of /boot/grub/grub.cfg in Ubuntu but this does nothing.
I modified SnowLeopard to install on mbr disk format. How can I chainload to the bootloader on the OS X partition using GRUB2. The autodetected entry MAC OS X put in by ubiquity on installing ubuntu doesn't work. In grub legacy I just added an entry with root() and chainload and it worked. How can I achieve this with grub2?The computer is an Intel Mac. I am unable to install Windows 7 on a GUID disk (without using bootcamp).
View 3 Replies View RelatedI have two hard disks sda and sdb. I have Windows XP installed on sda2 and Ubuntu 10.04 on sdb5. When I installed Windows XP, Ubuntu stopped booting. I tried to repair grub2 from a Live CD unsuccessfully. Now I have completely messed up my MBR of both HDDs. I just want to configure grub2 to load both OSes in dual boot mode.
View 9 Replies View Relatedi initilally installed ubuntu 9.10 then installed windows 7 ,then i recovered grub2 using livecd as told in the post [URL] i did "sudo update-grub" and got windows 7 menu entry but when i select that entry windows 7 does not load but the grub2 is reloaded again.
i cant boot to windows 7.
Windows 7 have 100 mb partition "System Reserved" the grub2 points to that partition but still windows 7 not loaded.
sudo fdisk -l
Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x3c3a81f5
[Code]....
I went through so many post but I haven't found the proper answer yet hope you have an Idea1. Grub2 saves only Linux OS as last selected no Windows OS2.It is possible to boot into a cdrom (drive)?
View 2 Replies View RelatedAnybody recently succeded in installing GRUB2 on Mac OSX partitions? I have to compile in un Fedora/Ubuntu/Gentoo. It work, but once back in OS X, I get this error:
./grub-mkimage -d . -o grub.efi part_gpt hfsplus fat ext2 etx3 ext4 normal sh chain boot configfile linux -bash: ./grub-mkimage: cannot execute binary file
I tried to build it in Ubuntu 8.04, gentoo and Fedora Rawhide, all fail with the same error. Look like the binary compatiility between OSX and Linux is broken in Leopard. I would love to have a faster boot, it take half a minute to get to grub, using Grub2 with EFI would take 3 seconds. As I don't need bios emulation, Fedora would also run faster. Anybody have a compiled and working Grub2? Is there a better way to use Grub2 with EFI? A working one if possible
OSX: 10.5.8
Linux: Ubuntu 9.10
Mac: MacBook Pro Santa Rosa (3 years old with a Core 2 Duo 2.2ghz)
GCC: 4.2, 4.3, 4.4
I'm not the world's biggest fan of rEFIt to be perfectly honest. It doesn't allow me to customize the menu, set a default, etc. I'd rather boot exclusively using grub-efi. Not just that, I'd prefer to be able to do so without needing an hfs+ volume to bless it onto. edit: I can now see that Elv117 has asked this recently. I shall leave this post here in the hopes that someone knowledgable runs across it and not the one further down the page. Also, I'll probably try working through the tutorial to see if I can manage it. I need to evaluate if I really need OS X at all on my MacBook. I think it would be neat to have GPT/Grub2/MacOSX/Ubuntu/Win7 working properly, the way a "modern" computer ought to. Reverting to MBR is just throwing in the towel.
View 7 Replies View RelatedI have a macbook pro 4,1 which does not have a functioning cd drive. I'm trying to install ubuntu by loop-booting an iso from the hard drive (or a usb drive, or using the netbook kernel, or the files from a live usb, or anything really) It will not boot off of usb drives. I've read that this is an issue with the firmware of these machines and there's not much I can do about it. rEFIt sees the usb drive, but the macbook complains there is no OS when it attempts to boot from it.
I've installed grub2 locally by dropping a home-built grub.efi (And modules and whatnot) in /efi/grub. This lets me pick grub from the refit menu, and grub will correctly load up a grub.cfg, and I can get into a grub shell and browse around, pick kernels etc. The problem comes when I try to boot anything. I've tried the netboot kernel and initrd, I've tried loop booting an ISO, I've tried copying a live usb to disk and booting that kernel, but no dice. any way I go about it, I can select the kernel and initrd, and that appears to work fine. Grub gives me some correct-looking info messages about the kernel and initrd that I just loaded, but then when I try to actually boot (i.e. with the boot command), nothing happens, I just get a cursor that sits there and does nothing.
I've tried with everything (the iso, the kernel and initrd) on the first partition, on other partitions, with different filesystems (both hfs+ and fat32) all to no avail, and all with the same symptoms, grub just sits there after the kernel and initrd are loaded and does nothing. I'm wondering if there's some kernel arguments I need to make things happen on the macbook or some other magic like that. This is a pretty non-ordinary boot setup so it's not terribly easy to find info about it.
[Code]..
I recently reinstalled Ubuntu 10.04. Since I did that I have had a problem with GRUB: I cannot see the Recovery Mode menu - at least not anything intelligible.
I can see the normal first GRUB menu with all installed operating systems, recovery modes, and MEMTEST, etc, but cannot see the Recovery Mode menu. What I do notice (if I select it) are some fuzzy lines at the top of the screen. I also notice the Ubuntu splash screen does not appear any more either.
Clearly it seems there is a resolution issue. I have a 1440 x 900 monitor and the current version NVIDIA driver.
This happened some time ago on previous Ubuntu releases, but was not an issue when I originally installed 10.04.
Attempted Fix:I installed the StartUp-Manager and have tried all the resolution combinations with no success. Some yield bigger more centrally displayed fuzzy lines, but still nothing legible.
Although this isn't "life-threatening" I'm just a bit worried that I might need the Recovery Menu and not be able to use it.
I run a number of Ubuntu 9.10 boxes attached to multiple daisy-chained KVMs. None of the PCs are using any GUIs - they all run in console mode. I often reboot them remotely via an SSH session, etc. If a monitor isn't actually active on the PC when it reboots, Grub2 uses a low-res video mode, despite having a higher-res video mode set correctly in Grub2's configuration. If I reboot WHILE THE MONITOR is attached to the Ubuntu PC via the KVM, the video mode is set correctly as configured in Grub2's config files. If I reboot WITH NO MONITOR attached, the video mode is ignored and I'm stuck in a low-res mode next time I attach to the PC via the KVM. How can I force Grub2 to honor the configured graphics setting, despite not having a monitor present at the time it boots?
View 1 Replies View RelatedHave win98se on secondary master as it fully supports some devices Ubuntu doesn't (Aries scan it pro, pci smart modem, Lexmark printer/scanner x2250), Lucid is on primary master. Grub seamlessly booted windows using menu.lst entry:
Code:
titleWindows 95/98/Me
rootnoverify(hd1,0)
savedefault
[Code]....
Would be grateful if anyone knows a configuration that works, as using CMOS/BIOS setup to boot windows is a pain.
I've upgraded to 11.04 and now my desktop environment sucks (it's just as useless as an Apple desktop environment, should I report a bug?).
How do I restore normal functionality?
I'm running 9.04 on a Powerbook G4 and, long story short, I accidentially put it into hibernate mode. When I try to turn it on, I am greeted with a blank screen after the bootloader. Unfortunately I can find no way to get out of this, since I'm using yaboot instead of grub. I can access my yaboot.conf file if I mount the HD from a live CD, but is there something I can put in there to tell it not to try to resume from hibernation? Or would deleting the swap partition at hda4 that apparently contains my hibernation data solve the problem?
View 8 Replies View RelatedI have been given an Apple Ibook that wont boot
View 9 Replies View Relatedhow do I make grub boot to allow me to choose, like safe mode and normal mode and all that second, how do I do automated back ups (preferably using file copy) for something like every sunday at 11:00 am using the command line, i use to know but forgot.
View 1 Replies View RelatedI attempted to install Catalyst 10.11 for my ATI HD 2600XT and the system now only displays lines and a large block of pixels where the mouse would go. CTRL-ALT-F1 kills the system and does not provide a command prompt. This is a single installation, not dual-boot, but there is no Press Esc to access the Grub menu during startup so I cannot choose safe mode. I attempted to get into Recovery mode using the flash drive that I used to install the system and it tells me there is no Recovery kernel (I used the 64-bit Desktop installer, not alternative). Does anyone know an alternative to get into the Grub menu other than ESC during bootup? Alternatively, do I need to download the 64-bit Alternative ISO and create a new boot disk with it so I can access Recovery mode? Is there something else I'm not thinking of?
View 5 Replies View RelatedI use openSuSE and want to try Ubuntu.This is the layout of the partitions:
Code:
sda1 /boot (SuSE)
...
[code]...
I would like to install ubuntu on my imac g4 but osx won't boot so I wanted to
to use ubuntu is there any way to eject cd from single user mode?
I need boot in emergency mode (not single user mode), from docs:
[URL]
in red hat enterprise 5 it's ok, not in red hat 6.
I recently got a netbook and setup as dual boot between win7 starter and 9.10 (64bit). Win 7 starter is not impressive so i want to nuke it and give the space all to my /USR partion. I am comfortable working with Gparted and assume that i can launch using my gparted live usb and delete the windows partion and then resize the /usr partion.
what changes do i need to make w/ Grub2? I would prefer not to see the Grub menu at all and have it load right the main kernel if possible. Also, if this is possible is there a way to get to the Grub menu during boot should i need to select a different kernel?
After installing karmic with Grub2 I am unable to boot into Archlinux partition. Grub2 has removed the last line of the Archlinux boot stanza! It used to read:-
[Code]....
Following the Grub2 tutorials I have tried editing /etc/grub.d/40_custom as follows:-
[Code]....
But no luck. Only way into Archlinux is to get into the edit shell and manually add the missing line and remove other stuff not needed. I have spent hours trying to resolve this issue and I am fairly p----d off
I was yesterday evening experimenting inserting a script into /boot/grub/grub.cfg. Well I broke grub.cfg and had to try to boot from a grub2 prompt.I have separate /boot and / partitions on /dev/sda1 and /dev/sda2 respectively.Working out the correct syntax for the boot to work was a little complicated, so I thought it would be useful to post the correct procedure here, in case anyone else has the same set up that I do (separate /boot and / partitions)At the grub prompt code:
grub> set prefix=(hd0,1)/grub
grub> insmod linux
grub> set root=(hd0,2)
[code].....
I'm as big a fan of Linux as Linus Torvalds himself but it's things like this that help to keep Linux from becoming mainstream. I mean, how would I ever explain the need for the following procedure to a non-techie type, recent or prospective Ubuntu convert? The following is not a question, as I have finally resolved the issue but is more of a rant, I guess you could say. The reasons that I decided to post it are:
1) To hopefully help someone else experiencing this issue.
2) To point out the need for significant improvement in the area of editing partitions under Ubuntu Linux.
3) To vent my spleen.
[Code]...
I have a jpeg file on my Windows system that won't delete. However, when I try to boot into safe mode to delete it, I can not get into the menu to select "Safe Mode". F8 just boots me right into Ubuntu.I have Windows 7 and Ubuntu 10.10 on an Acer Aspire 5520.
View 3 Replies View RelatedI'm having an odd dual-boot problem. Briefly, I can't boot Windows XP from its entry on the GRUB2 menu. If I set the disk order in BIOS so that the machine boots off the drive with Windows XP, XP starts normally. However, if I boot off the Ubuntu drive, which brings up the GRUB2 menu, choosing the "Windows 7 loader" option (why it says Windows 7 when there's only Windows XP is another question!) just makes my system reboot.
It appears there's some problem with the way GRUB2 attempts to start Windows XP. I'm also wondering why GRUB2 thinks it sees the Windows 7 loader. There shouldn't be any Windows 7 anything anywhere. I once had a Windows 7 RC install on the same disk as Windows XP, but I wiped the Windows 7 system partition and reallocated its space as just another NTFS partition. FWIW, GRUB2 is installed on the MBR of the disk containing my Ubuntu install. Windows XP has a different drive all to itself.
I upgraded a while back to Windows 7. I run two separate HDDs, with debian on sda and windows on sdb.Everything worked fine, up until i upgraded to windows 7. The installer forced me to unplug sda and make sdb primary. After installing I repositioned the HDDs and was stuck with a "NTLDR is Missing" messageAfter removing the search -fs--uuid tag from grub.cfg, Windows 7 booted for a good 0.5 sec and then rebooted. All that flashed was the "Starting Windows" page. I see similar bugs reported in the launchpad, but nothing that directly parallels this Here's my windows entry in grub.cfg:
Code:
menuentry "Microsoft Windows 7 Ultimate (on /dev/sdb1)" {
insmod ntfs
[code]....
I've installed Xubuntu 10.10 on a very new EeePC 1201HA. The netbook came preconfigured from the OEM with the disk split into two Windows partitions of about the same size, one with Windows 7 starter. I removed the second partition (Which was just empty) and have installed a series of different distros since then, to try and gauge their support for the 1201HA hardware. I finally settled on Xubuntu, which can support most of the laptop's features with some tweaks.
However, after this last install, and a Grub config change needed to make the framebuffer work on this hardware, I'm unable to boot Windows 7.Grub shows it on the menu normally, but when I select the Windows 7 entry, I get the message 'Reboot and select proper Boot device or Insert Boot Media in selected Boot device and press a key,' which I understand isn't from the OS but rather a BIOS message which implies there is no loader.
I've tried using the Windows 7 system restore to do everything short of rewriting the Windows bootloader to the MBR (Which would, of course, remove Grub and thus not solve my problem, as I couldn't load Ubuntu from it). I attempted to fix the boot sector on the partition with the system restore tools, to no avail. And because this is a netbook with no optical drive, I'm unable to reinstall from a disk.
GRUB2 won't boot. It hangs just after the 'Boot from CD' thing in my BIOS.I've had 1.97 working on my PC about 24 hours ago, but I decided to start afresh and go for Xubuntu 10.10.I'll post the PC specs in the morning, but in the meantime, does anyone know how to fix this?It's going to be a Xubuntu only system, and I've tried to repair the GRUB files via the Live CD and here.
View 4 Replies View Related
