I installed Ubuntu on my intel-based 5,5 macbook pro 13'', with rEFIt installed on the mac hd, everything worked fine and I've been using Ubuntu for a while now, as in a month or more, but you see I only partitioned my 150GB mac hd to 7gb to install ubuntu on, but after downloading all the software and media, of course that space is starting to look a little bit small, anyway I didn't notice that until actually Ubuntu started to act up, as in it's being too slow and unresponsive , well that's what I should expect when I'm severely running out of space right.
anyway the space I had left was only a few megabytes, so what I thought would solve this, is actually using the Mac HD, since I have 50gb or 90gb of free space, but actually I can't write on my mac hd, so after research I found out that Ubuntu can only read hfs+ but can't write unless it's fat32 or linuxswap or other formats, so to my unexperienced decision, I happily decided to simply reformat my mac HD from hfs+ to fat32 using Gparted, BIG MISTAKE, once I did it, which happened in 4 seconds mind you, I restarted my macbook, and to my unpredicted surprise, where rEFIt should load, nothing did, not even my MAC OS, just a blue screen was there...
of course I panicked, I mean nothing loaded, how am I going to be able to even fix this if nothing as in not even Bios is there...but after a while Ubuntu or Grub just loaded, so I thought good, at least I have an OS to post my problem using, I tried deleting some media to free up space so I could at lease open a web page.
so my problem is, is there a way to return my Mac HD after reformatting it to fat32, I tried to format it back to hfs+ but for some reason Gparted can't do that, and now I can't access anything on my Mac, I find it hard to believe that around 100gb of data could be deleted in a mere 4 seconds, but if it did, at least I want my mac and OS back.
if the comp happens to reboot while the drive is plugged in, it will try to boot from it, but can't because there's no more operating system, and will just freeze. Now, I know I can switch the boot order in the BIOS, which I have, but I'd also like to remove whatever "boot-flag" remains on the drive.I actually have two external hard drives and a thumb drive that do this. In case it matters.
I previously had Windows 7 and Ubuntu running together (dual boot) separating the HDD 50/50. When i booted up my machine I had 2 options on the boot menu. Windows 7 and Ubuntu respectively. I recently re-formatted my HDD re-installing Win7 and Ubuntu 10.10. Now when I boot my computer I get 5 options.
I'm fairly new to Ubuntu and I'm running Karmic Koala. I just reformatted an NTFS partition to Ext3, as I no longer need to access is from my windows installation. Now I'm unable to mount it though, and I get the message: Error mounting: mount exited with exit code 1: helper failed with: mount: only root can mount /dev/sda6 on /media/DATA2 (DATA2 being the name of the previous NTFS partition. Now the label is linuxdata)
When I try to mount it using sudo in terminal I get the following message if I use the label DATA2:
NTFS signature is missing. Failed to mount '/dev/sda6': Ogiltigt argument The device '/dev/sda6' doesn't seem to have a valid NTFS. Maybe the wrong device is used? Or the whole disk instead of a partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
And if I use the label linuxdata: mount: can't find /media/linuxdata in /etc/fstab or /etc/mtab I've tried to search for help, but been unable to find an explanation.
I had problems with my Ubuntu Server 10.4, so I reformatted and reinstalled (I only choose OpenSSH from the install menu), then after it rebooted I installed apache. So I can access the machine via web, ssh and scp from within my local network, but strangely outside my network I can access it from web, but not ssh or scp. Nothing has changed on my router.
Running PCLinuxOS 2009. I had a partition formatted with ReiserFS. I was trying to create a large file (a clone of a VirtualBox .vdi file) and it kept stopping me at 2GB, so I decided to reformat with ext3.
a) I deleted or moved all data b) sudo mkfs -V -t ext3 /dev/sda11 c) sudo e2label /dev/sda11 VDIBKP
This appeared to have worked: $ sudo blkid /dev/sda11 /dev/sda11: LABEL="VDIBKP" UUID="f80616fa-147b-4810-aa6d-3b7c236a4cfb" SEC_TYPE="ext2" TYPE="ext3"
I believe it is a keylogger because my Facebook account has been hacked, I believe my email has as well. I heard that even if you reformat a harddrive, the virus could still sit there and apparently that is what happened to me. how to be rid of it and keep my security. I installed RKhunter and Chkrootkit. Rkhunter reports warning files while checking my filesystem. I can post a log if need be.
Used gparted to format a brand new iomega prestige 1 tb usb hard drive (ntfs) to ext4. The problem is that I can't create folders from nautilus because I don't have permission (root). There is one folder present already lost + found that appeared after reformatting. i can't access that folder because of permissions. Was any of this supposed to happen after formatting an external drive and how can I fix this? I intend to use grsync to back up important folders but can't create folders from grsync also. The only account on ubuntu is mine and i have access to root privileges.
Neither Ubuntu's Unity or KDE respond to the function keys on a regular Apple USB keyboard. I can plug in a non-Apple keyboard and they work just fine. What needs to be changed or configure so that F1 and company on the Apple keyboard work as on other keyboards?
This morning I bought an Apple wireless keyboard and I got it connected through Blueman. It works like a charm, but I have on problem;
When I log out I can log back in by typing in my password. However, when I restart the computer it seems that bluetooth is not loaded yet and I cannot enter my password. So I have to log in using my wired keyboard, and then disconnect & re-connect to my wireless keyboard using blueman before I am able to use the wireless keyboard.
Is there any way that I can already auto-load bluetooth and connect to my keyboard before I log in?
I'm trying to use an Apple wireless keyboard with Ubuntu 9.10 (Karmic) but the fn key is not working at all. If I start up xev and hit the fn key it generates no event. What do I need to do for it to work. It seems as if it should work when viewing pages like
i connected my apple ipod in ubuntu 10.04..its showing msg that" do no disconnect" but there is no trace of ipod in the system,not even any icon in desktop too
I think I have a corrupted file system on my 1TB harddrive as both Windows Vista and Ubuntu are not seeing it. How do I recover the drive. I have never experienced this sort of thing before.
I've a new format in my HDD and put win7 and ubuntu 10.04. I made a partition about 50GB so that i can get files from ubuntu to windows and the other way around.I can see that partition in windows but not in ubuntu.
Yeah, I've been messing around with my partitions recently to make them more organized and appealing to my OCD file management habits. My main partition that I use to store all my files and windows programs on was previously labeled "Free" since I installed Ubuntu a few weeks ago and created separate partitions for things, I didn't like the vagueness of the name, so I changed it to "Storage" via GParted Partition Editor.
Yet, for some reason it always changes its self to all capital letters. I label it "Storage", it becomes "STORAGE". I've researched around for others who have similar issues, but they usually ended up with a response similar to "It's Fat32, so it's always capital." I don't see how that's true, considering mine was labeled "Free" for the longest time..
I have a partition to share files between Ubuntu and Windows, sometimes it becomes read-only but it's always reversible, this time it seems completely locked, all folders even have lock symbols and I can't change any file even if I open nautilus as root.
I can use it through windows with no problems, and have tried using PySDM to modify it but it's still the same.
I have a 500GB Hard Drive NTFS format that is full of movies and pictures. I want to convert it to FAT32 and connect to XBOX 360.
I have GMount and have been doing test with a smaller 4GB flash drive. The drive was NTFS I was able to format it to a FAT32 no problem. Was not able to mount it in ubuntu so that I could actually add files to it . Ubuntu knows that the 4GB is their but will not let me open or mount it.
So can you change a hard drive to a FAT32 and still write to it from in Ubuntu if so how?
My system consists of a laptop running Ubuntu 9.10, a network drive (Samba share formatted fat32 the only option) and a desktop PC running Windows XP. For several weeks have been trying to set-up Unison to synchronise files between my laptop and a network drive with only limited success. I mount the network drive locally with:
sudo mount -t cifs //netdrive/store /home/gm/NAS -o guest,rw,iocharset=utf8,file_mode=0777,dir_mode=07 77.
Then in Unison (graphical interface),
root 1 is: /home/gm/Shared_Docs root 2 is: /home/gm/NAS/HomeBackup/Shared_Docs_Backup
After clicking the �OK� button, Unison searches for changes files and I click �Go�.
An error is then produced, a sample of which would be:
�Error in renaming /home/gm/NAS/HomeBackup/Shared_Docs_Backup/.unison.Our-inv.xlsx.f3e8034159989f9de7081f9154319a2b.unison.t mp to /home/gm/NAS/HomeBackup/Shared_Docs_Backup/Our-inv.xlsx: Input/output error [rename(/home/gm/NAS/HomeBackup/Shared_Docs_Backup/.unison.Our-inv.xlsx.f3e8034159989f9de7081f9154319a2b.unison.t mp)]�
If all files in the destination directory (root 2) are first deleted, all files are copied correctly without errors so, I think the problem may be caused by permissions where Unison is unable to overwrite the original file. I know formatting the network drive fat32 is probably making the matter worse, unfortunately I have no alternative.
I'm installing a new SSD this upcoming weekend. My thought was to go easy on it so it lasts longer by putting my swap files on a mechanical drive instead of the SSD. I don't - however - want to waste space for swap files. It would be nice if I could use the same 6GB FAT32 partition for swap files for both Windows 7 and Ubuntu. Is this possible? It might not even be necessary though, I have enough RAM that I rarely use the swap file at all (I've even considered going without swap all together), so it probably won't pose a huge load to the drive.
When my parents got a new 16:9-television I found, it has a USB-slot to display photos. So I bought a new 2 GB USB-stick for them and copied over some photos. Well it works quite well, if you organize the photos in folders (because a flat list is simply unmaintainable).
I really spent some time to work this out on my laptop. But the next day I showed it to my parents on their TV, the photos came in seemingly random order. Taking a second look the order is not really random, but shuffled once for all time. The television does no sorting at all and shows the photos in the order, the files were added to the directories.
As I understand from the documentation of the TV, defragmentation can not only rewrite files so their contents are in a neat sequence, but also reorganize folders and especially sort the entries. There is just one problem: My last WinXP-PC was already recycled, though I still have the installation-CD.
Now I definitely don't want to install WinXP everytime over Ubuntu, just to do some defragmentation now and then. Moreover I don't want a dual-boot, as it would tempt me, to abandon Ubuntu and switch back to WinXP.
On the other hand, I don't want to bother my friends with this little problem, as far as admitting, there are things I simply cannot do with Ubuntu won't help me persuade them, that Ubuntu is a veritable replacement.
Finally the TV and the stick are at my parents home which is quite a distance away. I imagine bringing more photos on my laptop *TO* them, but not taking the stick with me every-time, just to "repair" it on some WinXP-PC somewhere far away, thereby effectively taking all the other photos away *FROM* them.
Getting more specific:
1. Are there any defragmentation / reorganization / reparation tools to maintain FAT32 under Ubuntu?
2. Has anybody ripped Scandisk+Defrag from WinXP and got it running with wine? Is this save in the way, that it will not damage the FAT32 filesystem?
3. I've installed WinXP in VirtualBox from Sun (not the OSE-version). But so far I could not access any USB device. The menu-entry in virtualbox is simply grayed out.
I have a Windows 7 partition, a fat32 partition that I use for moving data between Windows and Linux, and an Ubuntu partition. On the Ubuntu partition, I can right click on a text file and the top of the menu says "open with 'gedit'." On the fat32 partition, the same action says just "open," and the "open with" submenu doesn't include gedit.
If I right-click and choose properties on the same file, the "open with" tab shows gedit as the default file association. So that's weird... anyone else seen anything like this?
I am dual booting windows 7 and ubuntu 10.04 using grub. I am using a 1tb samsung hard drive. Ubuntu has 750gb and windows has 250gb. I want 500gb of my HD to be FAT32 so I can put all of my music, pictures, and videos on it. I don't have more than 100gb used on either partition.
I have done quite a bit of searching and browsing, but I can't find a good step by step guide to do this. I am guessing I need to figure out how to use fdisk?
I purchased a new HD and my goal is to have a Windows partition, an Ubuntu partition, (a swap partition of course), and large fat32 partition for storing data to be used on both the Windows and the Ubuntu side.
I am installing from USB and do not yet have a copy of Windows to install. I keep getting an error saying that the attempt to mount vfat failed.
