Ubuntu / Apple :: 10.04 Won't Boot Anymore On G5?
Feb 23, 2011
10.04 was working quite well on my Imac G5 with Yaboot for few weeks.
I tried to boot macOSX which failed and returned to Ubuntu which was stioll booting OK as I did not touch the linux part of the yaboot conf.
But Now It won't boot anymore :
- It seems to boot OK till X launching.
- then I get a Black Screen and None of My PC Keyboard shortcuts can get to another tty.
My Next try is to get a PPC LIveCD and try to see if Yaboot.conf is OK.
View 5 Replies
ADVERTISEMENT
Feb 1, 2010
I tried to install Ubuntu on a USB HDD on my Macbok Pro 5.3. Everything seemed to be fine, but while rebooting the computer, OSX doesn't start anymore. So, I would say I erased the boot sector of the internal HDD or something similar but I'm not an expert. My internal HDD seems to be fine: One 200 MB FAT32 partiton partition labeled EFI and with the boot flag, One HFS+ partition for the system. I tried to boot with the Snow Leopard DVD and run the Disk Utility to make a "repair". The repair was fine, but the Mac still doesn't boot anymore. (Forget Ubuntu, it's only OSX related, I'll try again Ubuntu only when I'll be able to boot OSX again).
View 9 Replies
View Related
Dec 2, 2010
I have been given an Apple Ibook that wont boot
View 9 Replies
View Related
Apr 29, 2011
So we install Windows 7 home premium. Then in goes the Ubuntu Disk. Ubuntu seems to think that the windows 7 partition is one big lump of unallocated space. Tried multiple re-installs of Windows 7, all concluding the same. A bit of googling told me that it has something to do with partition tables or something. I even tried to use Gdisk to delete Gpt from the windows disk, which - as I have absolutely no idea what any of it means, - resulted in me screwing up the entire Win7 partition hence win7 not being able to boot anymore.
i've seen on the internet include a lot of technical garble which I don't understand. I've been using Linux for a while, but as far as partitioning and dual booting is concerned, it's always gone smoothly for me up until now
View 1 Replies
View Related
Feb 4, 2011
Having enjoyed Ubuntu 10.10 for about a week parallel to Win7, I can't boot it anymore. I suppose it's because of the following: on win7 I have the Acronis Disk Director Suite (version 10.0). The Acronis OS Selector comes with it. So I thought it might be a good idea installing it before I install linux to be able to switch between the OS's afterwards. Then having ubuntu installed I ran windows and uninstalled the OS selector as I saw that ubuntu has it's own bootloader and the Acronis one didn't even run. I restarted my Laptop and win7 started automatically. No bootloader anymore. So I installed the Acronis OS Selector again and it can't even find linux (It was able to find both OS's before...) even though it shows the linux-partition (I ran the predefined installation where ubuntu partitions on its own) is still installed. So Ubuntu is still on there I just can't run it.
Where did my Ubuntu bootloader go??? (I NEED Ubuntu cuz Windows7 doesn't support my soundcard...)
View 9 Replies
View Related
Jan 30, 2011
Got a boot problem on a sony vaio with ubuntu 10.04. All was working fine, and now, suddenly, it can't boot anymore....
Sometime, I get
Error : hd0,2 Out of disk
Most of the time, I get
udevd[87]: worker [94] unexpectedly returned with status 0x100
udevd[87]: worker [94] failed while handling '/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda2'
udevd[87]: worker [97] unexpectedly returned with status 0x100
udevd[87]: worker [97] failed while handling '/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda5'
ALERT! /dev/disk/by_uuid/fc478e75-0c7e-4dec-abf1-a2c4b8fd2b87 does not exist. Dropping to a shell!
Busybox v1.13.3 (Ubuntu 1:1.13.3-1ubuntu11) built-in-shell (ash)
Enter 'help' for a list of built-in commands.
initramfs
It looks like there is no disk in the machine. Yesterday, there was one... So I boot with a liveCD. and have a look with fdisk:
ubuntu@ubuntu:~$ sudo fdisk -lu
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x598c9b19 .....
With disk utility, I can find my swap partition 4Gb, my system partition (Ext4, 20Gb), and 476Gb of freespace.
View 2 Replies
View Related
Feb 11, 2010
My Ubuntu 9.10 will not load anymore after installing the updates from the Update Manager. I get the message after restarting under the heading: [1.469482] Kernel panic- not syncing : VFS : Unable to mount root fs on unknown-block (8,2). I am very surprised that this will happen especially after installing the security updates from the Update Manager. Is there a way I can still save my Ubuntu?
View 10 Replies
View Related
May 18, 2010
I have dual boot Windows XP pro SP3 / Ubuntu 9.04 and I only use the Windows to download torrents because the download speed on Ubuntu is terrible...
But by accident I pressed the power button when I was downloading in Windows and since then Windows won't boot anymore. Is this a Windows problem or is it maybe that it srewed up my grub? Because I can still select Windows in the grub menu but it stops at "Starting up".
View 9 Replies
View Related
Jan 2, 2011
I've searched the internet all over, but somehow I didn't find a solution (I REALLY hope there is one :/). Of course I might have missed something, I found a lot of similar, but not quite identical problems.Today, when I tried to start up my system I was quite shocked, as my Ubuntu 10.10 didn't boot. The error I got was "No init found. Try passing init=bootarg".I didn't have any problems booting Windows XP, which I had installed alongside Ubuntu, so I burned a Live CD and tried to find out what was the matter.
As it appears, my Linux partition (/dev/sda5) is broken. I can't access it via Nautilus, as I always get a "A job is pending on /dev/sda5" error. Mounting it via terminal doesn't seem to work either.When trying to check the filesystem, either in Disk Utility or in GParted, I instantly get an error that the "device is busy" and (again) that "a job is pending".I tried to set a boot flag on /dev/sda5 (it wasn't there before), but this didn't help neither with accessing the partition from the Live CD norI tried to run the boot info script I found somewhere in a forum post, but it is just hanging itself up as soon as it starts checking /dev/sda5.
And "sudo mke2fs -n /dev/sda5" just gives me a "/dev/sda5 is apparently in use by the system" error.By the way I did all these steps just byollowing advices in other threads, so I do not necessarily understand what I did there.e .. is there a way I can get my files back? I would really, really hate having lost all that since my last backup is 3-4 months old (yeah, yeah, I know) and I have some quite rtant data on that filesystem.While there seems to be a big problem in that NOTHING seems to be working, GParted still recognizes the partition and how much of the disk space is in use .. so not everything can be lost - or am I wrong?
View 9 Replies
View Related
May 27, 2011
I can not boot into ubuntu anymore, I have a kernel problem. Is it possible to save the stored data? Maybe with a livecd? I am really tired to solve the kernel problem I will only save my data and then I will install ubuntu again.
View 5 Replies
View Related
Aug 4, 2011
I need to use bluetooth, but for some yet unknown reason I don't seem to be able to switch on the bluetooth-card (it should be as simple as to press the Fn+F6 buttons on the keyboard to switch it on though and then the bluetooth indicator should light up, which is not happening, but I don't know if this is because of (X)ubuntu) and Ubuntu says it can't find the bluetooth card. That's not what I wanted to discuss now, but I think some history is always welcome when trying to do fault-finding I thought I maybe might be able to do it from Win7 . So after months of not having booted Win7 I thought to give it a try, but I get stuck right after the grub boot-screen. All I get is a blinking cursor for minutes and there's no HD activity. Then I booted Xubuntu again and it needed to do some check, which I passed and Xubuntu started as normal. This check was done by "Keys". I don't really know what this Keys is, but since a couple of days I always get this word below the word Xubuntu in the boot-splash-screen. This is only after I installed WinFF or DVD::RIP. There was some error during install telling me that it needed something with 'keys', so I entered the command quoted, something was installed and then the rest of the installation went okay. I've been looking in the bash_history files (user and root) but I can't find the command which I entered to install this keys-thing anymore, which is of course strange on itself.
Now I've got the idea (I'm not sure though) that I can't boot Windows because of this keys thing, but I have no clue how to get rid of it. Or could there be other problems causing Windows not to boot?
I really hope someone can help me getting back in Windows again, because losing the Windows partition really is not fun, even though I hardly use it. I can enter the Windows partition from Linux with a file manager though, so it's not vanished. Just wish to be able to boot Win7 when I need it.
View 9 Replies
View Related
May 24, 2010
I had just finished upgrading my system to 10.04 and it restarted my pc and now i can't boot my pc anymore All i have is this at the beginning
[Code]....
View 2 Replies
View Related
May 7, 2011
I'm fairly new to Ubuntu and I like it a lot. However, there's a graphical error which started to happen after the very first bootup. The startup screen (the purple one with the 5 dots that appear) isn't showing anymore. It is replaced by some console technical guff scrolling down my screen (which isn't a problem, because Ubuntu itself works fine, but it just looks a bit rough). Again, on shutdown, it displays some amalgamated mix of more technical jargon, and a terribly lo-res version of the shutdown screen.
Is there any way I can fix this?
View 4 Replies
View Related
Dec 11, 2010
I can't boot into my debian anymore, and I have no idea what is causing this Here is the output of dmesg in the attachement.
View 14 Replies
View Related
Apr 6, 2010
I am using Ubuntu 9.10. Since a few days my I cannot boot anymore with the newest kernel (2.6.31-20.31). Instead I get a menu with a menu that lets me boot in recovery mode or boot from previous kernels (2.6.31-19).
In recovery mode for 2.6.31.20 it hangs at: Waiting for root file system. It boots just fine with kernel 2.6.31.19 except that apache and cups have to be reinstalled after every reboot. Everthing else seems to work without any problem.
Is there a way to do a system recovery, like in Win XP, going back to a system state from before the problems started?
View 8 Replies
View Related
Jul 18, 2011
This morning I switched my machine and the Update Manager prompted me to upgrade.So, as usual I did it. After upgrade it asked me to restart. Since then id didn't boot anymore. Now I have blank screen with a blinking cursor ... immediately after the BIOS screen, so it looks that no OS is loaded.
View 9 Replies
View Related
Oct 6, 2010
My server with Opensuse 11.1 doesn't boot anymore.This afternoon I've installed imagemagick over yast. After that the server still works for a couple of minutes. Then it stops working (I'm not sure if it's because of the installation). so I had to reboot it.But it never came up again.It doesn't boot anymore.I get the boot menu and can make my choice. But it doesn't matter what I choose (standard or failsagfe) the only message I get is:
Code:
Booting 'Failsafe -- openSUSE 11.1 - 2.6.27.48-0.2'
root (hd0,0)
[code]...
View 8 Replies
View Related
Apr 15, 2011
My Lucid LTS Ubuntu Studio 64 (amd) won't boot anymore; / and /home each are software raid 0 partitions.
I have a Multimedia partition (also ext 4) which I attempted to chmod with a GUI program (I forget what its called now) to enable all users read/write access. Looks like I inadvertently fstabed that partition to be mounted at boot-time (normally my password was required in order to mount it).
I tried to logging out and back into my OS to see if the partition was now writable but it wasen't; instead a filesystem error was noted. I realised then that my partition was IMPROPERLY labelled and I was in a tired state and didn't remember how to rename it & rebooted to make sure all was ok. But it was not:
An error occured when mounting /media/Ubuntu unknown filesystem type "Multimedia"
Boot: recovering journal
From my generic Ubuntu system on a non raid partition, I finally removed the space in the 'offending' partition: Ubuntu Multimedia to UbuntuMultimedia. And I changed the permissions for it.
But if I try to boot Ubuntu Studio via recovery; booting in low res is unusable, and it gets stuck if I SKIP mounting. So I am left with manual boot or drop to a shell. I will have to use an editor like vi or nano and the command prompt. I know that I likely only have to comment out a line in etc/fstab but I am only familiar with nautilus or gedit for this type of operation. And since this OS is on a raid partition its not 'seen' on the live CD....
I would need someone to offer me clear steps to follow with the non gui editors otherwise I'm in trouble...
I just wanted to use that partition for video editing and now I am locked out of my system!
View 2 Replies
View Related
Jul 25, 2010
I'm using a dual boot system with Fedora and Windows XP. Until a few days ago i could boot in Windows or Linux choosing the option during boot. I have updated Fedora with common updates these days and now i can't boot in Windows anymore, because there are no entry for it anymore to the boot menu.
The graphical boot configuration tool (i'm using Gnome) only lists three different kernel for Fedora but any entry for a Windows partition. Here is how my disk appears:
I'd like to know why this occur and, mostly, which is the most easy way to restore the dual boot
View 4 Replies
View Related
Jul 18, 2011
i have got a very strange boot problem. But first: I have openSUSE 11.4 with kde installed. I have the amd64 dual core cpu and 2 hard disks. I was able to boot from both of those disks (on the second disk I have openSUSE 11.2 in case something goes wrong with the first disk). Then I decided to install openSUSE 11.4 from DVD to a usb key (just like I would to a hard disk). I succeeded. I did not involve any partition of the hard disks in this install. But now I can not boot anymore from any of my both hard disks although bios finds them it did before. After bios I get the following message: Loading stage 1.5 error 21.
Error 21 means: Selected disk does not exist. This error is returned if the device part of a device- or full file name refers to a disk or BIOS device that is not present or not recognized by the BIOS in the system But I am still able to boot from usb key. I have even modified the menu.lst from the usb key to boot openSUSE 11.4 from the first hard disk. This works fine. I have also tried to install grub again on my first hard disk with grub.install.unsupported and with yast2. But installation stops with an error message like "hard disk not found by bios".
View 3 Replies
View Related
Aug 2, 2011
I have Linux Mint and Windows 7 installed on my laptop, and recently tried tinkering with EasyBCD, to use the Windows multi-boot loader instead of grub. Well, that didn't work out too well, because I ended up with the Windows boot loader with two options, Windows 7 and Linux Mint, however the Linux Mint entry just redirected me to grub, which wasn't what I intended.
I tried to put things the way they were, with grub as the only boot loader, and figured I'd do so by setting EasyBCD to skip the multi boot screen and going straight to the Linux Mint entry, which corresponds to grub.Well, now when I boot, I get the grub screen, but if I select the Windows 7 entry, it just redirects me back to grub, so I can't access Windows 7 right now. What can I do to fix this? Can I edit the Windows boot loader from within Linux?
View 13 Replies
View Related
May 23, 2010
After a kernel update action, it seems that I'm unable to boot a system anymore. First off, after installing the kernel, and trying to shutdown to boot to the new kernel, the system replied with INIT: no more processes left in this runlevel. Kernel update was performed from to the following versions 2.6.18-128.el5.img -> 2.6.18-164.11.1.el5.img . The system is a VMWare virtual machine. When trying to reboot, the system passes GRUB, starts initializing and after loading the dm it stops for a few seconds at the message Waiting for new devices, show the following message:
Setting up new root fs no fstab.sys, mounting internal defaults. After this and a few other messages, it displays : INIT: version 2.85 booting INIT - No more processes left in this runlevel INIT: Id "x" respawning too fast : disabled for 5 minutes And then it just hangs. This is the output of my inittab:
[code]...
The system boots into failsafe, but still shows the errors mentioned.
View 5 Replies
View Related
Feb 18, 2012
My system doesn't boot anymore, when I turn on the laptop, instead of the normal grub screen, i get the following:
"error: file not found
Entering rescue mode...
grub rescue> _"
I tried also to make a bootable usb w/ unetbootin but all the distros failed to load w/ a syslinux boot error message so I really need to fix the existing debian installation to get access to my files i need for the university, it's debian stable (6.0.4) on hp mini 210 ....
View 12 Replies
View Related
Dec 7, 2009
I've installed kmod-nvidia on my F12 system and now it doesn't boot anymore. I just receive a black screen with a blinking '_' on top of my screen immediately after i choose F12 in my grub menu. (I have a Nvidia 8800GT.)
I've tried to run the following command after the installation but it didn't work: [url]
mv /boot/initramfs-$(uname -r).img /boot/initramfs-$(uname -r)-nouveau.img
So I didn't blacklist nouveau or anything else. I just foolishly thought it was going to work.
Now I can't boot my system anymore. Is there any way to solve the problem? Or can I remove kmod-nvidia using a live cd? How?
View 4 Replies
View Related
Jun 3, 2011
I use evergreen for 11.1 on a hosted server. I just did a "zypper up" and I can't boot anymore!I still have access to the server through a recovery system a bit like the openSUSE rescue. But my main mail server in on this machine, so I don't have anymore access to the evergreen mailing list (of course I can subscribe from gmail of else, but i try first here).
I can reinstall from my hosting provider, but I just missed the point that this reinstall is not from 11.1 but to 11.4, and that mean I have to reconfigure most of my service, and this takes time.is there a way I can reinstall original 11.1 base? may I stop the evergreen repo, do zypper up and be undergraded?important notice: this server use a provider kernel and lilo, not the evergreen kernel. I now have a 2.6.38 kernel next time I will try simply issuing "lilo".
View 1 Replies
View Related
Sep 20, 2010
My dual boot Windows 7 and Opensuse 11.3 doesnt work anymore, i have to keep repairing the OS i want to use, i fix one and that breaks the other, how can i fix this so both work
View 7 Replies
View Related
Sep 5, 2011
When i boot my PC, i get this in my Fedora 16 distro. I have tried as following but none allowing me to boot anymore.
Grub loading.Welcome to GRUB!
error: file not found. Entering rescue mode...
grub rescue>
grub rescue> ls
(hd0) (hd0,gpt3) (hd0,gpt2) (hd0,gpt1)
grub rescue> ls (hd0,gpt2)/
./ ../ lost+found/ memtest86+-4.20 grub2/ System.map-3.1.0-0.rc3.git0.0.fc16.i686 config 3.1.0.0.rc3.git0.0.fc16.i686 grub/ vmlinuz-3.1.0.0.rc3.git0.0.fc16.i686 elf-memtest86+-4.20 initramfs-3.1.0.0.rc3.git0.0.fc16.i686.img initramfs-3.1.0.0.rc4.git0.0.fc16.i686.img System.mpa-3.1.0.0.rc3.git0.0.fc16.i686 config-3.1.0.0.rc3.git0.0.fc16.i686 vmlinuz-3.1.0.0.rc3.git0.0.fc16.i686
View 2 Replies
View Related
May 16, 2011
After installing Slack 13.37 on one of my systems while using my own (non-standard) kernel it refused to boot as the harddisk couldn't be found anymore. Investigation yielded that the ahci.ko driver wasn't loaded (but libahci.ko was). However I listed both ahci.ko and libahci.ko in the mkinitrd -m parameter so there had to be an error in the new /sbin/mkinitrd script. It turned out that a grep at the end of the script weeded out my ahci.ko module as the searchterm "ahci.ko" was already detected in the modprobe line for libahci.ko.
I decided to fix it in an easy way : I just prepend a "space" in front of the module name at the line where the grep is called :
[Code]....
View 2 Replies
View Related
Aug 8, 2011
I recently switched from fedora 14 to 15. Today my computer suddenly shut down during an update, as I thought it overheated I decided to clean the cooling system and reapply thermal paste. However, now the system won't boot anymore ("kernel panic - not syncing : VFS: unable to mount root FS on unknown-block").
I would like to either solve this booting problem, or mount the fedora 15 filesystem and recover some files. Whichever is easier.
I have another drive with fedora 14 (antec below) which boots fine:
Code:
View 4 Replies
View Related
Mar 25, 2011
i changed the boot up resolution in the boot up loader to 1366*768 (native res of my monitor) the boot option is still set to quiet splash however, instead of showing the progress bar, it would now always display the complete boot up log ( the list of starting services and such) i then manually changed the boot option from to 1024*768 at boot loader screen, and teh splash would show up, but then on next boot up if i stick with 1366*768, it doesnt work again
View 4 Replies
View Related
