Anybody know of a Linux version of Adobe Acrobat?
I've tried pdf creator which won't install and I've also tried the Open Office Draw sun-pdfimport plugin
Draw will create pdf files but only saves them in odf which is unreadable in Acrobat or Acrobat Reader..
I've been running 10.04 since September on my new MSi i3 notebook and about two weeks ago I noticed that when I login after system boot, propagation of icons on my desktop and the content of my Panel have become slower and slower.If I logout and login again the propagations are not slow.
View 1 Replies View RelatedOn a Debian system, I installed Adobe Acrobat Reader using the Linux binary (AdbeRdr9.4.2-1_i486linux_enu.bin) downloaded from Adobe's website. I realized there's a way to install it from a Debian package as opposed to Adobe's binary (and be able to keep up better with security updates), so I want to remove Adobe's version and install the Debian package. What's the right way to uninstall Reader when it was installed this way?
View 5 Replies View RelatedI downloaded Adobe Air, both the rpm and the .bin versions. First I tried the rpm, it went through the motions of installing but just disappeared. then I tied the .bin, got tot the installer, accepted the license, entered my root password, but it stopped installing with "an error occurred. Adobe AIR could not be installed. Install either Gnome Keyring or KDE KWallet before installing Adobe AIR". I opened Kwallet and tried again, but to no avail. I am running OS11.4 64 bit. What can I do to get this thing working?
View 6 Replies View RelatedI have installed bacula which by default installed the mysql backend. Asked me for the root password of mysql but since I couldn't remember I cancelled the configuration. I checked it out afterwards and now I know it but I can't find my way back to the bacula database setup screen once again. I have read that there should be a create_bacula_database script somewhere but I can't find it. Any tips on how to set this up?
View 6 Replies View Relatedthe OEM account was created when I just installed Maverick (10.10) and now I've changed the password on that account and want to create a daily user account, cannot locate where I can do that.I want to learn Linux badly but am completely in the dark beginner right now.
View 4 Replies View RelatedNew to the KDE plasma Desktop.I deleted the original desktop panel on my desktop. How do I re-create it. I deleted it when I thought I was deleting (1) of (6) WeatherLCD widgets I put on it not knowing what I was doing.
View 7 Replies View RelatedI'm looking for a terminal command that gives me the latest created folder in a directory tree.
Code:
ls -lR --sort=time --reverse
this i almost good, but a) it gives me files (rather than folders only), b) it sorts the files by folder (rather than just giving me a plain list of everything) and c) it takes way to long.
what i want:
Code:
2010-08-01 ./path/to/folder/a
2010-08-03 ./path/to/folder/b
2010-08-06 ./another/folder/c
[code]....
I'm trying to install a virtual 10.04 image on a 10.04 server host, and the method I used that worked with 9.10 now fails. For example, I try to install with the following virt-install command (as root):
virt-install --name=star3--escience --connect=qemu:///system --ram=3000 --vcpus=1 --disk path=/disk2/images/star3--escience_60GB_Ubunut10-04.qcow2,size=60 --noautoconsole --os-type=linux --os-variant=ubuntulucid --accelerate --cdrom=/home/mc321/ISOs/ubuntu-10.04.1-server-amd64.iso --network=bridge:br0 --vnc
[Code]....
In fact, that XtreemOS iso (a Mandriva derivative) is what I installed successfully as a quest OS on the same machine when it was running 9.10.
Is ACL the best way to ensure the permissions of newly created files? Basically I have a directory: /data/department
I've done chmod g+s on it so the group is correct on new files but I want new files to also have 775 permissions so the rest of the group can access these files fully. Currently they are created with the default 755 (which I want still every where out side of /data/department ).
I'm trying to repartition the 60gb hd on my macbook 1,1 so that I can triple boot os x, ubuntu, and windows. When I try to repartition it all at once with diskutil resizeVolume, I get the error: "Resizing encountered error on disk disk0s2 gunton: No space left on device (2"
Everything I've found through google indicates that this means there is not enough contiguous disk space available to resize and create those partitions. I defragmented my harddrive using the online mode with idefrag, unfortunately that didn't work. I also tried boot camp to just do the windows partition first, but it says it that it cannot move system files or something, basically the same error as above.
My thought was whether or not I could either create an os x bootable cd (no dvd-r) and fully defragment it while it's offline, but a du -chs of the necessary directories was well beyond 700mb.
My next thought is the pertinent question: is there a disk defrag tool on the ubuntu live cd? if not, if i downloaded one and placed it on a usb drive, will it mount from the live cd? or is there another way to combat this partitioning problem that i'm unaware of? (i don't have an external harddrive, so i can't timemachine/reformat/restore system).
I'm trying to install Ubuntu alongside windows 7 on my machine, and currently I am having difficulty doing so.Upon initial boot of the LiveCD,it says the installer has encountered an unrecognized error and just goes straight to desktop environment. From there, I can restart the installer just fine but here is where the trouble starts.
Currently, I have a 2TB RAID 0 array utilizing 4 500GB Seagate barracuda SATA II drives. The controller is an nForce 780a NVRaid. I currently have two NTFS partitions for windows. One 150GB primary partition for C:, and another 781GB D: for the storage of games, music and movies.When I try to manually setup the partitions in the Ubuntu installer, I do it like this.
- 200MB ext2 primary partition for /boot
- 150GB xfs logical partition for /
- approx 750GB xfs logical partition for /home (You've probably figured out I'm following the same C: and D: scheme as in windows)
- 8192 MB partition for swap
I then proceed with the install. I see the progress bar complete for the boot partition, but then at about 7% for / it stops and gives a message saying partition creation has failed. I even tried using different filesystems like ReiserFS and Ext4. Same thing every time. I am running a 64bit quadcore system BTW if that is of any importance.
I'm trying to create a folder using the archive manager to install Resin (web server) in the usr/local folder but I get the error message 'error creating directory: Permission denied.'
Is this the easiest way to install an app--by using the Archive Manager--and if so how do I establish the correct permissions.
I was lurking about my hidden files and noticed the ".thumbnails" directory. I had been browsing the web for about an hour and had opened some image files from my drive.HOLY CRAP! I had over 2000 thumbnails in that directory! Every time an image is displayed, a thumbnail of it is created? Really? Seriously, I don't care what the reason behind this "feature" is, how do I stop it? It is simply unnecessary and a waste of disk space.
View 9 Replies View RelatedMy problem is that I want newly created files to be 775 but they are 644 according to ls -l tho user that created can still write to file while other user in same group can't.
Current umask is 002.
Can't findout how to get newly created files to be 775. What should i do make all new files created by a user to be 775?
net book had some issues with windows, so i had to format its hard drive. i put in the ubuntu live image (usb) (yes i md5summed it, its fine) and i tried installing it using the guided partition (using the whole disk) and i tried setting it up manually, but regardless of what i try, when it attempts to format it to the necessary filesystem, it fails at 5% without fail. even IF i use GParted.
View 4 Replies View RelatedWhen I do a "clean" install of Ubuntu 9.10, Step 5 of 7 is when you choose how to partition your hard drive. My Acer Aspire Desktop has 8GB of RAM and a single 160GB SATA hard drive. If I choose to let Ubuntu do the partitioning, only three partitions are created and one of them IS a Swap partition. However, if I choose the second option to manually create my own partition tables, there is NO Swap option listed in the drop-down list of partitions to create!! Why in the world not, considering the importance of this partition and the fact that the first option DOES automatically create it? A second related (I think) is about the Live System Rescue CD and GParted 4.9. When do you use either of these utilities? After all, GParted is included System Rescue CD.
So, if I want and choose to do a manual/advanced partitioning of my hdd, the only time I can see using either utility is after the complete installation of the Ubuntu distro. Yet, choosing to manually partition my hard drive always results in an error or warning message that I haven't created a Swap partition before proceeding to Step 6 of the installation. Well, of course not since the choice isn't even possible. Good grief, what am I supposed to do when I arrive at the step where I am supposed to choose and then create the partitions for my hdd? Choose the first option, which I don't think is wise/good at all, especially with security in mind. Or choose the second option of using a program like GParted at all? It is hard enough for me to choose a partitioning scheme at all, since opinions on how many partitions are needed and what sizes they should be.
With reluctance I installed JRipper from Packman to rip some CD's because the KDE apps (K3B 2 and Amarok 2) on my 11.3 x86 install dont want to rip. Albeit a good ripping app I would like the KDE apps to work as intended.
K3b2 and K3b2 codecs packages are from Packman 11.3 x86 version. Amarok 2.3.1 is from the 11.3 x86 update apps openSUSE repro. LAME and transcode are also from Packman.
i'm trying to make a script that gives one output if a directory in /home is older than one month, and another if the directory is less than one month old. I looked around and saw that the creation date for directories isn't stored, or at least i couldn't find it? How is this possible to do then?
View 2 Replies View Related1. Evince is somehow screwing up font creation when displaying dvi files. I can preview the dvi file fine under xdvi. When I try with evince, I kicks off a slew of metafont font-creation runs, then shows me totally garbled pages -- the layout is correct, but none of the characters are right. This happens for documents that primarily use Times Roman fonts.
2. *Every* time evince comes up, it insists on starting in continuous / "fit page width" mode. I don't want either one. I want continuous-mode*off* and the window in the "best fit" view. So I have to click, drag, click, click, drag, release *every* time I pop up a file. It's very annoying. There doesn't appear to be any key in the gnome gconf config database I can set to affect these things. How do I fix this?...
I want to automatically allow all users read execute or write permissions on everything created by a specific user, is this possible? For example user Wendy creates an office doc, saves it on a shared folder. Then another user (usually windows log into this folder and wants to edit this file and cannot. I know I can edit the permissions on this particular doc to allow all users, but I want this to happen by default so I don.t have to keep changing permission on each doc....
View 5 Replies View RelatedI have a text file from which i read a number of names with their lengths at the run-time.Now i want to created a char array having the length and name as already read from the text file at the run-time. There is no compilation involved. Every thing is happening at the run-time. I tried using STL like map along with malloc but i am unable to name an array at run-time. I can keep some type of mapping with previously created arrays
View 3 Replies View RelatedI have to implement hardware redundancy.I have 2 linux machine for this and each have similar configuration/hardware. Lets say two machine Linux1 and Linux2. Currenty Linux1 have one NIC and it has 4 Ip address bind on it. Now I have to down the Linux1 and up Linux2 with same Ip addresses. Could it possible to configure all the Ip (same)address on both Linux1 and Linux2 and Linux1 have eth status UP while Linux2 have eth:y status down. I am trying it but on Linux2 machine I cant able to create multiple Ip interfaces with down status.
View 4 Replies View RelatedAm using apache and php to build a web application and am trying to create the file outside my working directory but its not creating Anybody knows what is the solution for this
View 4 Replies View RelatedI have CentOS 5.5 Operating System files copied from the DVD, it's not a ISO image. My Centos dvd is not working so, I would like to make bootable image and burn it on a DVD from the files and install CentOS on other machine. I have tried creating ISO image using mkisofs command but, it is not booting.
View 6 Replies View RelatedI am using D-Link wireless dongle on my fedora 11 machine.with commands i want to create and activate(up) an ad-hoc network.
View 5 Replies View Relatedcreation of initrd manually(not using mkinitrd).
View 1 Replies View RelatedI AM USING rhel4. and having openoffice1.1.5. . Now i have installed OOO3.2.1 . BUT I AM UNABLE TO FIND THE LAUNCHER PROGRAME FOR OOO3.2.1. IS THAT soffice.so ? it is not in /opt/openoffice3.2/.
View 1 Replies View RelatedScenario: ( in C++ code)
I need a process A to be able to get the start time of process B. I have the PID of the process B.
I would have thought there would be a simple system call to make by passing in the pid of Process B, but I don't thing there is??!!
So my other thought is to create a script that will be passed the pid and either I can read the file creation of /proc/<PID>/stat or I could also parse the start time of ps on the <PID>. This script can be ran from the C++ code. My difficulty is capturing this information in the C++ code. If I run exec ( or system if not a script) I need the results in a program variable....not stdout.
My only solution is write it to a tmp file and read it back into the program variable. Seems rather arguious but a least it would work.
Background - I need to port Windows code ( GetProcessTimes(creationtime,...))
I have a Dell Mini 9 netbook. The SSD took a dump, so I ordered a Super Talent 16gb replacement. I put it in yesterday, tried to install 10.10 and constantly get errors. The first error, which I haven't had since, was [ERROR 30] Read-only File System. The install obviously failed. Wondering if perhaps the file got messed up in translation, I redownloaded 10.10, reformatted the flash drive (sandisk cruizer 4gb), put 10.10 back on via the program on the Ubuntu site. No luck, but no longer the [error 30]. Tried again using Unetbootin, no luck. Rinse repeat a few times, no errors just a working cursor spinning and spinning and spinning and spinning and.. you get it.
Tried to put WinXP on it just because I was that frustrated, no luck.
Now I'm back to Ubuntu (because let's face it, who wants to deal with Windows, christ they make it so complicated). I'm currently using 10.04 because I was hoping (praying) it might just be a 10.10 thing.
No such luck, now it goes to step 7/7, starts, and 5% of the way thry "creating ext4 file system" it says "the ext4 file system creation in partition #1 (0,0,0)(sda) failed." I have checked the SSD in the Disk Utility, SMART tests are clean. I have gone to terminal and run fdisk and had a smarter person than me look at the copypasta, no errors, I have deleted all existing partitions in gparted and started fresh. I have tried the auto partitioning, I have tried manual, I am going insane. Literally insane. My preschooler thinks I've leaped off the deep end.
Could it be my flash drive? Could the SSD be defective despite the tests coming back clean? What do I need to type into terminal? Is there a way to entirely entirely entirely wipe the SSD to make it fresh-out-the-box clean? I will happily provide whatever you need if it means I can get my husband off my back about this stupid netbook with its stupid tiny keyboard.