I have a system-wide proxy setup, but Empathy and the Broadcast accounts don't appear to be using it. When I attempt to add a Facebook broadcast account it immediately comes back with 'Unable to load page.' When I try to setup an account in Empathy it also immediately fails.
View 3 RepliesI've problems to connect my empathy trough my office proxy. I already configure my amsn to access to my hotmail account and it works but when I try to use empathy it just doesn't connect.
View 2 Replies View RelatedFriends i have an idea to broadcast few local TV channels to the world via internet.But friends i can't directly broadcast from my country because of bandwidth.friends is there a way to do this through a remote server server? i just need to input my stream to a remote server and then broadcast it from the server.I can stream channels to the server from my country through a 10mbbs connection.
View 2 Replies View RelatedCurrently my DHCP Server is working now what i want to have is auto detection of squid proxy in any browser but I still got an error in my dhcp server when I restart it.
My Config:
# DHCP configuration generated by Firestarter
ddns-update-style interim;
ignore client-updates;
[code]....
I've been trying to make myself anonymous, but I cant find 'Tor' anywhere, tried 'yum & kpackagekit' neither have it. I did find 'Privoxy', installed it, set proxy for HTTP and HTTPS in Firefox, but it says 'unknown proxy' when I try to use it! I've been to the Privoxy web site and read through the 'User manual', but most of it is 'geek' to me!
View 8 Replies View RelatedI am trying to set up my squid3 proxy as a transparent proxy - right now, I have to manually configure browsers to access via proxy. I understand that I have to put some rules into Iptables and also some further directives in the squid.conf.
I have a couple of specific questions. The proxy server is running on a Ubuntu 10.04 workstation and this machine also acts as a dhcp server for the network. I have just one subnet , namely 192.168.0.1-254 There is only 1 network card. Is it much easier to put in a second network card or is it just as easy to configure the existing lan card as a dual IP?
Is it necessary to configure these 2 IP's ( whether they are via 2 lan cards or dual IP on single card ) to be on different subnets. i.e ETH0 192.168.0.1 and ETH1 192.168.1.1 or is ok to have something like ETH0 192.168.0.1 and ETH1 192.168.0.254 ( where ETH0 is the one facing the LAN and ETH1 points to the modem router / switch i.e The Internet ) Where specifically do I save the Iptables rule configuration file and what must I call it ?
I've been doing some security testing in a lab environment that does not have direct internet access. It's actually a little complicated: From home to connect to my lab machine, I
1. SSH to machineA.
2. SSH from machineA to machineB
where machineB is my actual lab machine. neither machineA or machineB allow anything other than SSH, and machineB is only accessible from machineA. However, I really need to run yum on machineB. I have managed to get internet access via Firefox on machineB by creating a series of SOCKS proxy via SSH.
1. machineB: ssh -L 12345:localhost:12345 user@machineA
2. machineA: ssh -D 12345 user@machineC
3. machineB: configure firefox to use socks proxy, localhost, 12345
where machineC has internet without limits placed. This is the only way I have managed to get internet working. I tried using ssh -L all the way from machineB->machineA->machineC but it didn't work (even when setting Firefox to use http proxy). I tried using ssh -D all the way, but again that doesn't work either.
I do have access via Firefox using socks proxy. However, yum update fails to retrieve mirror list, and from what I have found I don't believe yum supports socks proxy directly. Instead, it uses http_proxy / ftp_proxy. how to get yum to go out over the SOCKS proxy I created (same one using in Firefox)? It seems like since Firefox can access the internet and everything without issues, i should be able to get yum to tunnel through the same connection to access everything.... I tried
[URL]
is there a way to force wget to use a specific squid proxy when making connections ? - I use a squid proxy normally, but I need this specific request to go via a different one. I dont have to use wget, I just need a way to test squid's blocking rules by requesting various pages through it, this proxy is not my normally proxy on the network and so I cant rely on wget taking the environment variable.
Also, this is as part of a script, so anything that avoids editing wget config files would be best. - Perhaps curl can do this ? - currently im using the exit code of wget to determine if the connection was made.
I can't add my facebook account to gwibber. Here is what i do:Click on envelope in the top panel. Click Broadcast.In Broadcast Accounts click dropdown and select Facebook. Then click Add.I then click Authorise. A blue facebook login page appears. I click on the small link at the bottom that says Log in with Facebook.Type in my credentials and click Connect. Wait a long time then goes back to Authorise window. With the words Facebook authorised.I click on Add and nothing happens. I did try to start using this on Alpha 2 but gave up but now I've done a full reinstall using RC version.
View 9 Replies View RelatedI can't add facebook via broadcast, although I can add twitter
View 2 Replies View RelatedIs there a possibility on Ubuntu to Broadcast TV with shoutcast?
View 2 Replies View Relatedall I get is the broadcast address can be used to send packets of information to all computers on a network simultaneously. Can that be used during MPI programming or anything of the such? What is the day to day use of the broadcast address?
View 3 Replies View RelatedI am working on fc10. I connect to internet using two connections: with proxy and without proxy. Initially I had some problem in configuring yum for proxy and I resolved it by creating files proxy.sh and proxy.csh in /etc/profile.d with the required details (export_proxy).Now when I connect to my connection without proxy I have some problems .Whenever I try to do yum update I get the following error:
"[URL]: [Errno 12] Timeout: <urlopen error timed out> Trying other mirror. Error: failure: repodata/primary.xml.gz from adobe-linux-i386: [Errno 256] No more mirrors to try." what changes do I need to make in order to use yum in the connection without proxy?
At the moment I have a proxy and all the users have to configure it in the browser to access internet. I want to make the users able to browse even without configuring the proxy in the browser. but eventually it should be received in the proxy rather than giving an error to the user. I heard with transparent proxy I can redirect all the traffic from a particular network, to a particular host( ie my existing proxy).
I tried this using firewall rules. But then the existing proxy doesn't understand the protocol of the requests. I heard that it should be in the kind of proxy protocol.
I installed the Lucid Release Candidate today, and for some reason Broadcast Accounts keeps opening itself, even after I've added all the accounts I'm going to. Is this happening with anyone else, and how can I make it stop?
View 9 Replies View RelatedI am trying to set up my facebook account with gwibber. I click on add account and authorise my facebook account with gwibber successfully, but then when I close this window and go to the main gwibber window, there is nothing showing, so I go back to the accounts page, and there are no acconts listed there.
View 7 Replies View RelatedFor some reason, since logging in recently, I've got 2 instances of the Broadcast in the messaging menu. One of them is indicated as running, the other one is not. When I select the one that isn't running, a *third* instance of the Broadcast button appears - so I now have 2 running, and one not running in the messaging menu. In the usr/share/indicators/messages/applications folder, I have 3 files - Gwibber, Empathy, and Thunderbird.
View 2 Replies View Relatedi m setting up a linux server and i have to setup ip , in static mode. so i know everything except those two things. how do i calculate them?
example ip:200.49.142.91
submask 255.255.255.248
gateway 200.49.142.89
I need to configure network. I have configured a labtop "1" as a wireless Access point. And connected 2 laptops. I want to broadcast from a labtop "2" a video and read it on labtop 3. This broadcast will be done first time using VLC server then using apache server.
View 2 Replies View RelatedHow do I calculate broadcast adrress if the address space is 192.168.36.16/28 then what would be broadcast address.
View 7 Replies View RelatedI have a Dell Vostro 1400 with a BCM4311 Broadcom wireless card that I just reinstalled with 11.04 from 10.04. I have the drives installed and it seams to be working when i run the 'Additional Drives', but I can't get the wireless adapter broadcasting. I followed the instructions given in the knowledge base on installing Broadcom Wireless, to see if I could get it running and that is where I saw the difference between the example and my computer when writing the 'sudo lshw -C network' command. In the example it said it was broadcasting under configuration (just like my wired networks below) and in mine it does not (see below for copy past).
I can't find a tickbox in the systemtray to enable the wirless networking that I had before the update to 11.04 (the 'Enable Networking' tickbox is still there and the wired network works fine - that is how I got online to do this post). I have the hardware switch turned on and I have been in the BIOS and made sure that the Wireless is enabled.Anyone who knows what could be wrong? Where could I go from here?Quote:
morgan@morgan-Vostro-1400:~$ sudo lshw -C network
[sudo] password for morgan:
*-network UNCLAIMED
[code]....
I'm looking for a solution to broadcast messages on the network. All systems are Linux / Ubuntu.
It would be used in case the server has to be rebooted. It saves me a walk to every office in the building.
For an (art)installation I want a camera (webcam) to stream it's data to another computer with icecast2 server installed (including theora) in the same space. Problem is I need something without a gui.
The webcam is /dev/video0, and I would like to stream the video with vloopback (is working already with 2 pipes) to /dev/video3. If I'm right then I should be able to stream /dev/video4 to icecast.
How can I make the webcam video go into pipe /dev/video3? From [URL] I understand I have to do:
Code:
resize /dev/video0 /dev/video3 320x240 320x240
But then I get:
Code:
Usage: resize [-u] [-c] [-s [rows cols]]
[Code]....
I would like to save a broadcast video with mplayer but I want do it while they are seeing, I mean, I want see them in real time, but also recording them and see them when I want I've actually got with audio files with:
Code:
mplayer http://whatever/audio -ao pcm:file=/home/user/audio.mp3 It works perfectly, I listen to the audio file from the radio I connected and save the file. But I can't with video, I tried: Code: mplayer http://whatever/video -vo x11 -ao pcm:file=/home/user/video.mp4
Is there any guide available explaining how to setup Chat and Broadcast?It is not very important (I dont use it much), but as ubuntu is now "Social from start" and very user friendly it should be very easy.However I have not been able to set it up no matter what i have done.
View 3 Replies View RelatedIt could run on my computer. But there is no result.
[code]...
This is not a linux specific question more of a general network issue with the hope that someone may have already done this under linux.My problem:I have a red hat linux machine transmitting IP multicast packets onto an ethernet gigabit network (cisco switch).Wireshark (running on a different red hat linux box confirms packets on network.
View 4 Replies View RelatedI've setup squid proxy st time on centos 5.This is my current setup.squid.conf:Quote:acl our_networks src 192.168.10.0/24 ttp_access allow our_networksQuote:
internet -- modem -- Firewall --switch--squid proxy (192.168.10.100)
--client workstation ((192.168.10.200)
(client workstation is connected to the same switch as the squid proxy)
[code]...
I have setup a few machines within my house. The Debian Squeeze machines do not provide a host name in the DHCP client list on my router. Strangely, my Ubuntu, Android, and Blackberry machines do show host names. I have noticed the same behavior when wirelessly tethering my Debian laptop to my Android phone (which also uses DHCP). Is there something I need to enable to have the name show up on the router?
View 14 Replies View RelatedI just want to ask if its possible to hear music from different stations using Internet Broadcast? If it only works for Windows platform, is there a way to work with openSUSE (install application or something that will work)?
By the way, here is the link that I am referring to: e-Radio Portal