Networking :: Forwarding All Traffic To The Proxy To Another Proxy
Oct 28, 2009
At the moment I have a proxy and all the users have to configure it in the browser to access internet. I want to make the users able to browse even without configuring the proxy in the browser. but eventually it should be received in the proxy rather than giving an error to the user. I heard with transparent proxy I can redirect all the traffic from a particular network, to a particular host( ie my existing proxy).
I tried this using firewall rules. But then the existing proxy doesn't understand the protocol of the requests. I heard that it should be in the kind of proxy protocol.
View 1 Replies
ADVERTISEMENT
Jul 19, 2011
My PC is part of a LAN so while configuring eth0, we specify the Gateway to access all other resources in the network. The PC successfully access Internet through a proxy server configured in Mozilla(manual proxy config) but the update option or the Synaptic Pkg mngr are not able to access internet anyway. I have tried the option "Apply System Wide" in "Network Proxy" but no progress so far.
I also tried to forward all request coming for udp/tcp on port 80 to the proxyserver on a specific port, but with no success. Also I can't ping any website from terminal, reiterating the fact that I can access internet in firefox through the proxy on a specific port.
View 2 Replies
View Related
Feb 26, 2009
hi
i want to redirect the packet to proxy server. can u help me.
Present network.
MY internal network ==> switch ==> proxyserver ==> router ==> internet.
(for internet i use
to connect proxy, in web browser==> lan settings ==> proxy server ip address )
What i want is
My internal network ==> getway or firewall ==> switch ==> proxy server ==> router==> internet. ( where this getway or firewall i can configure for forward http request to proxy server.)
so that i can separate my internal network from intranet but able to access the internet.
help me out
raghu
View 2 Replies
View Related
Apr 17, 2011
How do you set up a linux workstation to act as a gateway for all other PC's in the LAN giving them internal IP's using DHCP, but which also forces all access to the internet to go through a proxy running inside the same linux workstation at 127.0.0.1:9666?the proxy is provided by ultrasurf and run using wine and we do not want to set applications one by one to use a proxy - it must be an automatic effect.
View 3 Replies
View Related
Apr 6, 2011
I need to redirect all http/https/ftp traffic through the remote proxy, but when I changes connection settings in browser or in System->Preferences->Network Proxy it doesn't work well: instead of getting page content browser asks for saving some short (8 bytes) file with the same content for all requested pages. It happens in Chrome/Opera/Firefox. This proxy requires authorization and works on computer with Windos XP. It worked well when I was using Windows 7 and Proxifier, now I have Ubuntu 9.10 with all available updates.
View 3 Replies
View Related
Mar 25, 2010
I am new to iptables. We have two Squid proxy servers running in "non-transparent mode" (172.16.0.1 and 172.16.0.2). Currently users have to configure the proxy server they want to use by configuring them in their browsers. Recently I saw an example for redirecting web traffic to a single transparent proxy server.
-A PREROUTING -p tcp -m tcp --dport 80 -j REDIRECT --to-ports 3128
-A PREROUTING -p tcp -m tcp --dport 443 -j REDIRECT --to-ports 3128
Can anyone modify this rule to accommodate my current setup of two proxy servers running in non-transparent mode. i.e Redirect web traffic to the 172.16.0.1-172.16.0.2 ip range.
View 2 Replies
View Related
Apr 22, 2011
I am using Debian 5 and I have some networking experience, however I want to learn to do this the best way possible. I have a Debian box with two nics and I want to connect that to a switch and use my Debian box as a router basically, as well as having a firewall setup within that too.
Should I use iptables to set up nat or the route command or what? I just want to know the group of tools to use in order to set up my network. Network diagram: Internet <------> Debian Box <----> switch <----> hosts I found some guides but they are for linux 2.4 and i'm not sure if they are right.
View 1 Replies
View Related
Dec 9, 2010
Currently my DHCP Server is working now what i want to have is auto detection of squid proxy in any browser but I still got an error in my dhcp server when I restart it.
My Config:
# DHCP configuration generated by Firestarter
ddns-update-style interim;
ignore client-updates;
[code]....
View 2 Replies
View Related
May 21, 2011
I'm trying to setup a Centos 5.6 Squid Proxy Server with Content Filtering & Antivirus Scanning Incoming HTTP Traffic from the Internet
I then proceeded to setup an configure the Proxy Server, i was able to test and confirm that Squid and Dansguardian Content Filter is working, however i dont know if Clamav is scanning HTTP traffic before it hits the client/server. Is there a way i can check if the Antivirus scanning is working.. is there some log file or real world test i can i can do to confirm that Clamav is scanning incoming traffic or even blocking potential viruses ??
Anyone who has squid proxy server with Clamav configured and its working can share there settings/setup with me and how they tested it ??
View 1 Replies
View Related
Jan 24, 2010
I am trying to proxy all traffic from Transmission. The proxy settings in the preferences seem to only effect tracker connections.
View 2 Replies
View Related
Feb 23, 2010
I've setup squid proxy st time on centos 5.This is my current setup.squid.conf:Quote:acl our_networks src 192.168.10.0/24 ttp_access allow our_networksQuote:
internet -- modem -- Firewall --switch--squid proxy (192.168.10.100)
--client workstation ((192.168.10.200)
(client workstation is connected to the same switch as the squid proxy)
[code]...
View 1 Replies
View Related
May 25, 2011
I need create ssh forwarding to other linux box that works as a proxy.I have two linux boxes(centos 5.5), one in the office(server1) behind firewall, other at colocation(server2)server1 has squid proxy instaled on port 3128.i cant use server1 as a direct proxy from home because its behind firewall.iwas able to create ssh tunnel from server1 to server2 and when i log in to server2 ican ssh root@localhost -p 12312 to server1
what i need is configure server2 so it forwards port server2:3128 to server1:3128....and i could add server2 ip addres and port to firefox proxy's and access ofice network.
View 3 Replies
View Related
Aug 11, 2010
I would like to redirect traffic coming from a machine A through a SOCKS proxy (setted on machine B)Machine B run "ssh -D 4242". So that create a SOCKS proxy on machine B.Machine A would like to connect on the internet, but the only way is to use machine B SOCKS proxy. The problem is machine A don't know how to use SOCKS Proxy. (Actually, i can just set ip, netmask and gateway on machine A).So, I would like to set up something on machine B that will redirect all traffic coming from machine A throught the SOCKS proxy.
View 1 Replies
View Related
May 13, 2010
I'm new to linux, but enjoy using it very much, especially without a GUI, console is fun! I need to set up port forwarding. We have 3 servers, 1x running Ubuntu server 8.04 (used as transparent proxy), 1x server 2003, 1x windows xp.
The linux box has the following ips:
eth0 (internal) 192.168.1.5
eth1 (external) 192.168.0.7
Windows server 2003:
192.168.1.6
Windows XP:
192.168.1.9
Router:
192.168.0.1
The router automatically forwards specific ports to 196.168.0.7 (Linux eth0). From there I want to forward port 8585 to 192.168.1.6 and 3000 to 192.168.1.9. Is there a way that I can do this using iptables?
The commands that I think I'm gonna use look like this:
iptables -A FORWARD -s 192.168.0.0/24 -p tcp --dport 8585 -d 192.168.1.6 -j ACCEPT
iptables -A FORWARD -s 192.168.0.0/24 -p tcp --dport 3000 -d 192.168.1.9 -j ACCEPT
Would this be a correct way of doing it? My biggest problem is that I can't test it without going live, and if I go live and something doesn't work, the entire building will be left without internet, people will hate me. Also, The proxy captures all data on port 80 and forwards it to 3128 so that the proxy can monitor the usage, and a few systems runs fine with it, others however can ping websites, and internet explorer says "website found, waiting for reply" but the webpages cannot be displayed.
View 9 Replies
View Related
Jun 25, 2010
I'm using Ubuntu 10.04, and starting a SOCKS proxy with 'ssh -D', and setting Ubuntu to use it with "System -> Preferences -> Network Proxy". Firefox uses the proxy, and the proxy's IP appears when I visit a site like [URL]. is Firefox resolving DNS requests through this proxy? Is my web-browsing truly secure? (That is, until I exit the other end of the proxy.
I know it's insecure after that.) (And I've verified the keys, I'm not being man-in-the-middled) (And--screw it. You know what I mean. Is it resolving DNS requests through the proxy?)I don't know how I would go about verifying such a thing for myself.Using additional hardware such as another debugging proxy is not an option. If Firefox isn't resolving my DNS requests through the SOCKS proxy, how do I go about fixing it?
View 3 Replies
View Related
Aug 2, 2011
I have searched and searched for a reverse proxy solution for non-website traffic. TCP but not http, on ports other than 80, 443, 8080, etc. Basically I just need a TCP forwarder that works with multiple TCP servers, WITHOUT webpage caching features. I do not need or want any webpage caching. Can squid work as a reverse proxy for TCP traffic without http? The other program I came across in searching was HAproxy. Both programs are for http but I am curious if they would work for TCP servers that do not serve webpages.
View 2 Replies
View Related
Apr 19, 2011
Will squid or HAproxy work to reverse proxy non-http traffic? I have searched and searched for a reverse proxy solution for non-website traffic. TCP but not http, on ports other than 80, 443, 8080, etc. Basically I just need a TCP forwarder that works with multiple TCP servers, WITHOUT webpage caching features. I do not need or want any webpage caching. Can squid work as a reverse proxy for TCP traffic without http? The other program I came across in searching was HAproxy. Both programs are for http but I am curious if they would work for TCP servers that do not serve webpages.
View 4 Replies
View Related
Jul 7, 2010
I've been trying to make myself anonymous, but I cant find 'Tor' anywhere, tried 'yum & kpackagekit' neither have it. I did find 'Privoxy', installed it, set proxy for HTTP and HTTPS in Firefox, but it says 'unknown proxy' when I try to use it! I've been to the Privoxy web site and read through the 'User manual', but most of it is 'geek' to me!
View 8 Replies
View Related
Feb 23, 2011
I am trying to set up my squid3 proxy as a transparent proxy - right now, I have to manually configure browsers to access via proxy. I understand that I have to put some rules into Iptables and also some further directives in the squid.conf.
I have a couple of specific questions. The proxy server is running on a Ubuntu 10.04 workstation and this machine also acts as a dhcp server for the network. I have just one subnet , namely 192.168.0.1-254 There is only 1 network card. Is it much easier to put in a second network card or is it just as easy to configure the existing lan card as a dual IP?
Is it necessary to configure these 2 IP's ( whether they are via 2 lan cards or dual IP on single card ) to be on different subnets. i.e ETH0 192.168.0.1 and ETH1 192.168.1.1 or is ok to have something like ETH0 192.168.0.1 and ETH1 192.168.0.254 ( where ETH0 is the one facing the LAN and ETH1 points to the modem router / switch i.e The Internet ) Where specifically do I save the Iptables rule configuration file and what must I call it ?
View 4 Replies
View Related
Feb 27, 2010
I've been doing some security testing in a lab environment that does not have direct internet access. It's actually a little complicated: From home to connect to my lab machine, I
1. SSH to machineA.
2. SSH from machineA to machineB
where machineB is my actual lab machine. neither machineA or machineB allow anything other than SSH, and machineB is only accessible from machineA. However, I really need to run yum on machineB. I have managed to get internet access via Firefox on machineB by creating a series of SOCKS proxy via SSH.
1. machineB: ssh -L 12345:localhost:12345 user@machineA
2. machineA: ssh -D 12345 user@machineC
3. machineB: configure firefox to use socks proxy, localhost, 12345
where machineC has internet without limits placed. This is the only way I have managed to get internet working. I tried using ssh -L all the way from machineB->machineA->machineC but it didn't work (even when setting Firefox to use http proxy). I tried using ssh -D all the way, but again that doesn't work either.
I do have access via Firefox using socks proxy. However, yum update fails to retrieve mirror list, and from what I have found I don't believe yum supports socks proxy directly. Instead, it uses http_proxy / ftp_proxy. how to get yum to go out over the SOCKS proxy I created (same one using in Firefox)? It seems like since Firefox can access the internet and everything without issues, i should be able to get yum to tunnel through the same connection to access everything.... I tried
[URL]
View 1 Replies
View Related
Aug 17, 2010
is there a way to force wget to use a specific squid proxy when making connections ? - I use a squid proxy normally, but I need this specific request to go via a different one. I dont have to use wget, I just need a way to test squid's blocking rules by requesting various pages through it, this proxy is not my normally proxy on the network and so I cant rely on wget taking the environment variable.
Also, this is as part of a script, so anything that avoids editing wget config files would be best. - Perhaps curl can do this ? - currently im using the exit code of wget to determine if the connection was made.
View 1 Replies
View Related
Sep 1, 2009
I am working on fc10. I connect to internet using two connections: with proxy and without proxy. Initially I had some problem in configuring yum for proxy and I resolved it by creating files proxy.sh and proxy.csh in /etc/profile.d with the required details (export_proxy).Now when I connect to my connection without proxy I have some problems .Whenever I try to do yum update I get the following error:
"[URL]: [Errno 12] Timeout: <urlopen error timed out> Trying other mirror. Error: failure: repodata/primary.xml.gz from adobe-linux-i386: [Errno 256] No more mirrors to try." what changes do I need to make in order to use yum in the connection without proxy?
View 3 Replies
View Related
Dec 30, 2010
I have just recently switched my setup to have my server be in the middle of traffic and act as my new router while making my other routers just switches. However, after doing this I can no longer access my UPnP devices. They used to show up in my router but I am assuming either there is an issue with my iptables rules or that some how having my server run the dhcp and dns routing is messing with UPnP.
View 2 Replies
View Related
Aug 7, 2011
how do i set the proxy in fedora and also editing the update location from the add or remove software in fedora 15.
View 1 Replies
View Related
Aug 12, 2010
I just installed the Lucid server, set IP address, Default gateway and Preferred DNSs and need to be able to use apt-get. Right now this is not possible and my guess is that I have not set the proxy used in my LAN (which is 192.168.255.60:8080) cause I have no clue how to do it.I can ping every other machine locally but not on the Internet...
View 8 Replies
View Related
Dec 12, 2008
I want to set up a web proxy on my laptop so I can access the net from my cell phone without using verizon's proxy. I don't understand exactly how proxies work, but I was wondering if this is possible to set up a proxy without a domain.
View 3 Replies
View Related
Feb 17, 2010
When setting up an SSH proxy, I know you can configure Firefox to route DNS requests through the proxy. Is this possible from linux directly? I'm trying to use wget through the proxy, including DNS lookups.
View 3 Replies
View Related
Apr 3, 2009
I have a netbook running Fedora 10 that i use for work, whilst at work i move around allot of schools. Each have varying proxy settings etc... So i was wondering if it was possible to set the system proxy (the one in System->Preferances->Internet And Network->Network Proxy) from bash. That way i can write a script that looks at my IP (each school has a diff ip e.g. 10.x.y.z) and then sets the system proxy accordingly.
View 6 Replies
View Related
Feb 23, 2010
i setup yum to use my proxy (/etc/yum.conf , /etc/profile.d / KDE network setting)and it works great.
but rpm does not.(the command rpm) how do i setup rpm to use the same proxy yum is setup with ??
View 14 Replies
View Related
Dec 8, 2010
I'm having an issue on multiple Lucid boxes where I can't get proxy ARP to work. This is to be used in conjunction with openswan IPSec. I've enabled forwarding and disabled sending/accepting ICMP redirects for each interface as per openswan's requirements. I've added the proxy arp lines for all, default, eth0, and lo to sysctl.conf:
Code:
net.ipv4.conf.eth0.proxy_arp = 1
I then connect the IPSec client, and I have connectivity to the server. When I try to ping (or otherwise access) something else on its subnet, I reach the intended target, but then it ARPs for the sending machine, and the Ubuntu server doesn't respond to the ARP.
I have an ARP entry that looks like this, added via arp -s 192.168.254.100 -D eth0 -i eth0 pub:
Address: 192.168.254.100 (the correct virtual IP for the client)
HWtype: *
HWaddress: <from_interface>
Flags Mask: MP
Iface: eth0
Best I can tell, everything is in order... I can listen in with wireshark on the server and see that it's receiving the ARPs, but I can't get it to respond to them.
View 1 Replies
View Related
