I am trying to pxe boot ubuntu 10.04
grub config:
Code:
title Linux NFS
dhcp
root (nd)
kernel /vmlinuz-2.6.34 console=ttyS0,9600 root=/dev/nfs nfsroot=192.168.1.1:/home/nfsroot ip=dhcp rw
initrd /initrd.img-2.6.34-pxenfs
[Code]....
Why ttyS0.conf job isn't invoked automatically ? is there anything wrong with configuration?
I am trying to pxe boot ubuntu 10.04.When it boot up,it doesn't show up login prompt from serial console ttyS0, Why ttyS0.conf job isn't invoked automatically ? is there anything wrong with configuration?
View 1 Replies View RelatedI've got a home server running ubuntu 10.0.4. It have no monitor or keyboard. So I want to access it from a serial console. (I use SSH currently but if something goes wrong, I need to be able to do something... so serial console seems a fine thing). OK, so on the server, I tell grub to output everything on ttyS0 and opened a getty on ttyS0. On the client side (Laptop running Ubuntu 10.0.4 with pl2303 USB to Serial adapter) I use Minicom.
Home server restart:I see grub menu, linux kernel messages, login prompt. But, I can't do anything:In grub or at the login prompt, no key press is recognized by the server.I've got write permission to /dev/ttyUSB0. I tried a different getty (mgetty)with no success.I stopped the getty on ttyS0 on the server. And run minicom.
From the server's minicom, if I type something, it appear on the client screen. From the client's minicom, if I type something, some garbage appear on the server screen :(One of this things for each char typed). If I short-circuit pin 2 and 3 of the client serial port, it echoed what I type. The two serial ports are connected with a nullmodem cable. (seems to be a full handshaking cable). Of course, same serial port config for both minicom, grub and getty. Hope I'm understandable enough. (English not my primary language). Can somebody help me make this *$*#! serial console working right ? I'm on it for 10 hours now with no success...
Edit : I nearly forgot to tell you I had to update the standard ubuntu kernel to 2.6.34-020634rc1-generic because there was a bug in the pl2303 driver in the stock kernel (2.6.32-25-generic) which prevented me from doing anything (even receiving).
I have installed KDE and all the software for it to run on my server through the serial console but when I go and run "startx" I get the following and KDE doesn't start running.
root@u15434060:~# startx
X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-28-server x86_64 Ubuntu
[Code].....
Is there a way to get console output over a serial (COM) port? I have a box that I use as a NAS, DNS, DHCP and mt-daapd server, I don't have a spare monitor and it is not worth buying one just to use it once or twice a year.
I found this guide [url] but it doesn't work with Natty
I have a dell poweredge server. In the bios, it has the option to redirect the screen to the serial port. There is also the check box "redirection after boot" which from what I understand will let me to continue to use the serial port attached to a terminal as if it was the main VGA monitor with a keyboard attached.
When I start the machine up, everything goes as expected, I see the output from the bios on my serial terminal, until debian actually starts booting. It all goes blank. If i attach a monitor i can see it is indeed booted and waiting at the debian login prompt. What should I do from here? I was under the impression that if i enabled "console redirection after boot" that the os would be none the wiser and i could continue using the serial console as the main screen as needed, but that does not seem to be the case.
i was using a serial console program (not minicom) two weeks back but took a break and have no idea what it is! man, it was awesome, too. it had a nice gui, similar to hyperterminal...and from what i think i remember it came packaged with f14.
View 4 Replies View RelatedI configured the serial consol on centos5 as follows
# dmesg |grep tty
Kernel command line: ro root=/dev/VolGroup00/LogVol00 console=tty0 console=ttyS0,9600n8
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A[code]......
But I could not consol Centos server from my labtop (win xp) Is there missing or wrong configurations ?
I am trying to connect to serial console, local one, just to verify than it works, is is possible?Well, I configure serial console
Code:
# ttyS0 - getty
#
# This service maintains a getty on ttyS0 from the point the system is
# started until it is shut down again.
[code]...
It is started, now I am trying to connect to the console via minicom, is it possible from machine where the console is running?If not, how could I check it remotely?
I am looking for a solution to administer my remote server running SUSE LINUX 10.1 (X86-64) - Kernel 2.6.16.13-4-smp. I have made changes to server and is able to see the boot process and also able to login to system through serial console.
My question, will I be able to administer the server through serial console incase if my root partition is corrupted and system has gone to maintenance shell(or root shell).
Also is there way to go directly to maintenance shell from grub(not talking about single user mode). I want to go maintenance shell where / partition is not mounted.
I am trying to connect to a cisco console port using the usb to serial converter. I am using minicom and I changed me setting to reflect the USB converter cable, but it isn't working. I have set my baud rate to 9600, 8 data bits and no parity. Minicom acts as if it is connected (it doesn't give any errors), but there is nothing on the screen and nothing happens when I type. Also, I use the tail command and it sees the usb connector connected when I unplug it and plug it back in.
View 10 Replies View RelatedIs there anyway I can automatically login to console without having to provide username and password as soon as I boot into the machine?
View 2 Replies View Relatedi have a simple sh script. It executes ok by clicking in dolphin but I would like it to automatically open a console window and execute in there so that I could see the output. Is this possible?
View 2 Replies View RelatedI like the convenience of having a music player that manages the placement of my music files based on the tags of the files, sorting into a root music folder with Artist/Album/01 - Track Title.mp3 sort of hierarchy. Previously, I was using Banshee for this feature, as even most of the other gui music players don't have this library management feature. Now, I've been trying to use console-based applications, and I have been using mpd + ncmpcpp fairly successfully. When I download new music, it is downloaded to a specific folder, and that's not part of my music collection. My previous workflow would be to open a gui filemanager at the downloaded folder, and drag and drop those songs onto banshee, which would then make a copy of those files in my library hierarchy. Currently, I'm doing the same thing, using Banshee only as a sort of import program, then closing it and updating my mpd database, and there we go.
If at all possible, I'd like to automate this to something where I can define a watch folder, and when some magical program sees new music in said watch folder, it identifies the correct place for the files to be copied into my heirarchy, renaming folders and files to the correct format. I know I've written a lot describing, but I don't actually think this too uncommon a task, and I'm wondering if anyone has a solution for my problem.
I have a bit of a dilemma. I'm attempting to use a microcontroller to send MIDI messages over a virtual serial port. I want to (eventually) read them with Mixxx. I'm using an FTDI chip, so I get a /dev/ttyUSB0. I've tried spikenzielabs' Serial-Midi program, but it doesn't see any serial ports. NOTEMIDI looks really old and won't compile on my 10.04 LTS machine.
View 2 Replies View RelatedI am trying to get two way serial communications going between a Windows XP system and a Linux system (RHEL 5).I have /sbin/agetty -L 9600 ttyS0
in /etc/inittab. I am using a generic USB to serial adaptor on Windows (Unitek) and a null modem cable. I have putty configured for 9600 baud, 8 bits, no parity, one stop bit, no flow control.I get the login prompt from agetty in the putty window but input does not work; I see weird characters in the putty screen. I can echo output into the device from windows and see it, but
cat < /dev/ttyS0. just prints out weird characters from what I type.
On my CentOS 5.2 install I've installed a dual-port serial card based on the NetMOS 9835 chipset. I've followed the serial instructions, but everything they tell me to do is already done - see setserial outputs below. I've compared these values to the lspci output (below, NetMos card is at the bottom of the output) for the card and it appears right. Problem being, I can't use the serial ports. Oh and I did use search, and looked at every 9835-related article before posting this :)
[Code]....
I am hoping to be able to get an old serial-touchscreen to work with a usb/serial adapter. I had this touchscreen working some years ago on different hardware. I would like to hook it to the machine I am setting up as a multimedia host with mythtv among other things.
Following the instructions I left behind when I got this to work way back when does not work. See [URL] ....
This info is a work around to get the xserver to see the touchscreen. [URL] ....
I do know that the touchscreen works as I am able to get garbage on the screen as in the first part of my howto. But I have not had any success getting xorg to see it. I wish I had posted a copy of the xorg.conf at the time, but......
There is an issue with the current xserver in testing that I am hoping the next update (in unstable) will fix when it gets pushed to testing. That is that Code: Select all# X -configure fails with a segfault. So I am not able to generate the xorg.conf needed to get it to work. I was going to post a bugreport, that is when I found out there is an update in unstable, so I am waiting for it to get pushed at the moment.
Anyway I am hoping that I can link /dev/ttyUSB0 to /dev/tty0 and get it to work. I would like some kind of guess as to my chances of success before I go to all the work of getting the monitor hooked to the host.
We have a new machine with RedHat enterprise 5 on it. I need to connect a serial cable to the serial port and talk to another system (old alpha system) instead of using a VT connected to the alpha.Does RedHat come with anything like Keaterm/hyperterm/etc etc?
View 3 Replies View RelatedHow can I start a program from tty1 console text mode to be executed in tty2 console text mode? Actualy I would like to start a program (chat client cli program) in tty8 automaticaly when linux PC boots.
View 6 Replies View RelatedI am having trouble getting grub to automatically boot into ubuntu server. When I turn on my server the grub menu shows up and shows me the choices. They all work fine except that grub wont automatically select one. This wouldn't be too much of a problem but this is a headless server and I can't boot into ubuntu without a keyboard. I tried looking through the grub 2 documentation but nothing seemed to work when I edited the conf file.
View 1 Replies View Relatedwhat to do for lock automatically slackware 13 if not used for n minutes ?What can i do to start automatically the ktorrent (a bittorrent program for linux) on system starts on slackware 13 ?
View 2 Replies View Relatedhow do I uninstall Java? Tried with Synaptic and apt-get remove, but uninstalling sun-java6 automatically adds default-jre (openjdk) and uninstalling openJdk automatically installs sun-java ... but I don't want ANY Java on my machine - am I missing something? Already thought I maybe have a package that requires SOME kind of Java, but how do I find out?
View 2 Replies View RelatedI am trying to get the ti_usb_3410_5052.ko driver installed but it gives a an error saying that "cannot locate the usb-serial.h file." Kindly let me know how to over come this problem. I saw in this forum about a patch but it is not working.
View 2 Replies View Relatedi need a usb to rs-232 converter to get into the console port i have an aten uc-232a converter and i have downloaded a .gz file called uplcom.4freebsd.gz i have unpacked it but i do not know what to do from here could some one please help i need to do some practice for the external icnd 2 exam and i have left it to the last minute as per usual.
View 2 Replies View RelatedI am able to use USB in serial mode for reading using
cu,
screen,
minicom,
jpnevulator,
[Code]....
i got this old UPS from compaq long back and installed it with a new battery. Thing is i need to connect it to my PC using this serial cable. But my mobo doest have 1. So i bought a COM port cable converter to serial and have attached the UPS through it.
Now after all this done, my PC wont detect any UPS.. i dont know whether its detecting it or not...
here is the output of dmesg|grep tty
Code:
stoned_420@stoners ~ $ dmesg|grep tty
[ 0.000000] console [tty0] enabled
[ 0.852459] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.852698] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
So is my UPS being detected :-/ If not how can i know?
Am attaching pics of what all i have.. save my UPS from draining off when i'm not at home and theres a power failure
I'm having ongoing problems with my Ubuntu installation(s) almost to the point that each addition causes new problems. The latest, continual problem is periodically the computer is being used and abruptly hangs with a blank screen. Though I believe the error is associated with my having an undefined ServerName for LAMP development server. I've decided to do a fresh install with all the options included and see what happens. I need some assistance in developing an install CD/DVD which has all the packages (and configurations) that I need. I want to be able to use a serial mouse (the computer is an older one and I only have a serial mouse to use).
View 1 Replies View Relatedive been looking through several online documents and forum posts but i cant get a clearcut answer on how to set up serial port acces in ubuntu 10.04 (server).
View 7 Replies View RelatedI bought a USB Adapter (Trendnet TU-S9) so that I could connect a old camera that connects via a serial port to my newer pc that has no serial port. The problem is that the adapter,to my surprise,requires drivers or some software to work.Windows, of course, and Mac drivers came with it on a disc but.... nothing for Linux. I am running Ubuntu 11.04.
View 1 Replies View Related