I'm having ongoing problems with my Ubuntu installation(s) almost to the point that each addition causes new problems. The latest, continual problem is periodically the computer is being used and abruptly hangs with a blank screen. Though I believe the error is associated with my having an undefined ServerName for LAMP development server. I've decided to do a fresh install with all the options included and see what happens. I need some assistance in developing an install CD/DVD which has all the packages (and configurations) that I need. I want to be able to use a serial mouse (the computer is an older one and I only have a serial mouse to use).
I want to get a serial mouse (PS/2 with adapter) to work on a Dell C400 (so I can use the one USB port for wireless). I enabled the serial port in the BIOS, but the mouse didn't work.
I tried my COM mouse KM-203S on Windows, it works out of the box. Now i want to make it work on linux. But the problem is that mdetect doesn't recognize it, and whatever protocol i select in inputattach, the cursor jumps unpredictably when i move the mouse. How can i get the parameters for this mouse - maybe baudrate, etc.? Or maybe i'm doing something totally wrong?Here's mdetect output (i moved the mouse while mdetect was working) on 300 8N1 mode (set by minicom):
after installing the OS my mouse was not working. After searching in net for a day, I made it working. Shall give the details hereIf its a repeat thread please ignore it.1. Go to Terminal.2. Login as root.3. su -c 'yum install -y system-config-display'This step will take some 2 to 5 mins 4. su -c 'system-config-display --reconfig'After Fedora 9/10, the xorg.conf is not available and it uses HAL to detect the hardwares. The above steps create the config file.
5. su -c 'cp /etc/X11/xorg.conf /etc/X11/xorg.conf.bak' back up 6. su - -c 'gedit /etc/X11/xorg.conf'
I discovered that I can activate my Kensington trackball by typing in a terminal:
sudo inputattach --microsoft /dev/ttyS0 After that I tried to automate that using Yast to place in /etc/sysconfig/inputattach: INPUTATTACH_DRIVERS="/dev/ttyS0:microsoft" It did not work. What am I doing wrong?
When I try to Sync a Palm Vx to my PC through serial port I get a communication error message in the gadget. My PalmOS Devices application is already configured to use tty0 or tty1 in unsuccessfully trials. I have a lot of information in the addresses, agenda, notes, etc. and do not want to loose that information gathered for years, nor to return to Windows.
As a test, I used a serial mouse in the serial port and It didn't work. I verified the Bios Setup and COM 1 and COM 2 are enabled.
I also checked my system serial support with the following commands:
And messages were OK when compared with typical outputs. My machine is a Pentium 4 CPU 1.6 GHz, in a U8668 motherboard (Award Software International). I have Ubuntu 10.04 LTS with Gnome.
I am new in Linux and don't know Bash yet. I had followed indications from Internet tutorials successfully, but I don't know how to proceed in this case.
I have a very old Pentium 3 that don`t have USB or PS2 suport. I need to configure a serial mouse. I did it on debian etch editing xorg.conf. I chage the mouse protocol to "Microsoft" and it works normaly. But on squeeze it does not exist!
I'm installing OpenSuse 11.2 on some systems. Unfortunately the only mouse available is a serial mouse. Hence the installer doesn't recognize the mouse.And it is somewhat cumbersome using the TAB and ARROW keys to navigate the graphical installation.Does anyone know of a boot option I could use to get OpenSuse's installer to recognize a serial mouse ?
I am attempting to use a serial trackball in CentOS 5.3 and have run out of ideas. The mouse is connected to COM2 (/dev/ttyS1). I have tried to configure it through xorg.conf using every protocol I could find including "auto" and tried the same again using "inputattach". The mouse communicates at 1200 baud, so I've tried using stty to set the port to that baud rate and still no luck. Is there a test tool that can be used to see if the serial connection is functioning? If not, are there any other ideas?
I have a bit of a dilemma. I'm attempting to use a microcontroller to send MIDI messages over a virtual serial port. I want to (eventually) read them with Mixxx. I'm using an FTDI chip, so I get a /dev/ttyUSB0. I've tried spikenzielabs' Serial-Midi program, but it doesn't see any serial ports. NOTEMIDI looks really old and won't compile on my 10.04 LTS machine.
I am trying to get two way serial communications going between a Windows XP system and a Linux system (RHEL 5).I have /sbin/agetty -L 9600 ttyS0
in /etc/inittab. I am using a generic USB to serial adaptor on Windows (Unitek) and a null modem cable. I have putty configured for 9600 baud, 8 bits, no parity, one stop bit, no flow control.I get the login prompt from agetty in the putty window but input does not work; I see weird characters in the putty screen. I can echo output into the device from windows and see it, but
cat < /dev/ttyS0. just prints out weird characters from what I type.
On my CentOS 5.2 install I've installed a dual-port serial card based on the NetMOS 9835 chipset. I've followed the serial instructions, but everything they tell me to do is already done - see setserial outputs below. I've compared these values to the lspci output (below, NetMos card is at the bottom of the output) for the card and it appears right. Problem being, I can't use the serial ports. Oh and I did use search, and looked at every 9835-related article before posting this :)
I am hoping to be able to get an old serial-touchscreen to work with a usb/serial adapter. I had this touchscreen working some years ago on different hardware. I would like to hook it to the machine I am setting up as a multimedia host with mythtv among other things.
Following the instructions I left behind when I got this to work way back when does not work. See [URL] ....
This info is a work around to get the xserver to see the touchscreen. [URL] ....
I do know that the touchscreen works as I am able to get garbage on the screen as in the first part of my howto. But I have not had any success getting xorg to see it. I wish I had posted a copy of the xorg.conf at the time, but......
There is an issue with the current xserver in testing that I am hoping the next update (in unstable) will fix when it gets pushed to testing. That is that Code: Select all# X -configure fails with a segfault. So I am not able to generate the xorg.conf needed to get it to work. I was going to post a bugreport, that is when I found out there is an update in unstable, so I am waiting for it to get pushed at the moment.
Anyway I am hoping that I can link /dev/ttyUSB0 to /dev/tty0 and get it to work. I would like some kind of guess as to my chances of success before I go to all the work of getting the monitor hooked to the host.
We have a new machine with RedHat enterprise 5 on it. I need to connect a serial cable to the serial port and talk to another system (old alpha system) instead of using a VT connected to the alpha.Does RedHat come with anything like Keaterm/hyperterm/etc etc?
I have install fedora11 live and the mouse work well when installing.When you reboot the mouse works ok until the welcome screen apears then the mouse stops working and I cannot continue with the postinstall. I have a 1TB usb externalHD that I am installing fedora11 and have partitioned it so that I have 500Gb free for fedora, system is doucore 2.4,4gb RAm, I tryed doing this with three differend mice and connectting the mouse to different usb ports
I get this error when trying to install 10.04 "The ext4 file system creation in partition #1 of Serial ATA RAID isw_dceecfcacg_Volume0 (stripe) failed".I have a sony Vaio with 2x256gb SSD running RAID0.
I want to verify that serial port libraries are installed in my system.I know that it is installed at /usr/local/lib. But I dont know what all files are to be present in there, so to ensure that the same is installed properly. Iam using suse 11.1.
Sorry title should have been F13 installation without internet I am having a P4, 1GB ram, 80 GB machine. Since yesterday I am having some funny issues on this machine. i have fedora 12 installed on this machine. My mouse suddenly stop working, or the cursor changes from pointer type to a line cursor and basicaly the mouse just stops clicking. I am plannning to install fedora 13 on this machine. Have downloaded the 5 iso ( CD images).
Would choosing the option upgrade on existing Linux partition do the job? Is there a chance I loose my data files when the upgrade is done? I dont want to reinstall programs like java, eclipse, tomcat etc that I done in fedora 12. I only intend using the CD's as I dont have a lot of bandwidth and a fast internet connection to use yum.
I just installed Ubuntu 10.10 on my HP Pavilion a320n computer with a ps2 mouse and the mouse pointer points with the bottom of the mouse and not the upper tip of the point. It does the same thing with Ubuntu 10.04.1. In Windows 7 and XP the mouse is normal. I don't know how I could adjust it or is this just a bug in the OS?
Updated to 10.o4 LTS and after the purple screen with Ubuntu 10.04 logo comes up, the log in screen shows but the keyboard and mouse cease to respond. So I am stuck at the log in prompt unable to input the password to continue boot up. PC has no PS/2 connectors available, only has USB ports for USB keyboard + mouse. Boot in recovery mode is possible, and after log in I have a command prompt available.
2day morning itself i m downloaded 10.04.1 (32-bit Desktop) and when trying to install first it was stopped at timezone selection phase and no reaction Forward button disabled (at this time keyboard and mouse r worked) after words when i m trying to install again keyboard and mouse r struck. Same thing happed when i trying to install 10.04 version.
i have installed ubuntu 9.01 in my i3 processor system without any partition.i hope its installed properly.now when i try to boot it.It show me the main screen with main menu bar,but cursor is struck up.i can not move the cursor.i have installed ubuntu thrice but the same problem continues
I used UBUNTU 9.10 with no problem on 3 of my computers. I tried to use UBUNTU 11.04 and with one of my old laptops I face a problem with the mouse pointer. I can not see the mouse pointer. The mouse seems to work, but since I can not see the mouse pointer, its impossible to upgrade to UBUNTU 11.04 the same problem with UBUNTU 10,04 but no problem with UBUNTU 9.10.(My laptop is Fujitsu Siemens Amilo)
I have custom built Linux kernel (2.6.31) and also xorg. xorg is using xserver 1.7.3 . I have an application which simulates the mouse and sends mouse move events. When I switch the device on, the system boots and Xorg comes up, I can see X cursor on the system. When I start sending mouse move events from the application, the cursor do not move. If I attach mouse to the device and then move the mouse, from this point onwards the mouse events get detected from the simulation application. I have checked the dmesg log as follows
BEFORE MOUSE CONNECTED. ..... kjournald starting. Commit interval 5 seconds EXT3 FS on hdb4, internal journal EXT3-fs: mounted filesystem with writeback data mode.
I just upgraded to FC14 (64) from FC13 (32) and the mouse middle button (simultaneous left+right button) paste function has stopped working. I tested it with 3 makes/models of different mice and trackballs. For some reason (left+right) mouse returns the same code as the single right-button ('xev' value = 3). This worked in all previous FC and RH distros I've used in the past. Did a default setting get zonked somewhere? System: Toshiba laptop w/ USB mouse.
Biggest one that make game unplayable is mouse. Mouse isn't moving smooth it jumps around. I cannot shoot anything. So i asked for help, and everybody just say install windows. And where is fun in that. If people when ever run into problem with some software on linux just install windows. Linux would never go forward. I m not some great gamer, but i would like to be able to play this game. Probably somebody run into same problem. I sow that people talk about something like dis on WOW and wine but simptoms doesn't seem same to me.
CNEE(1) General Commands Manual says this. RECORD OPTIONS --first-last Print only first and last of multiple successive MotionEvent. So I try this. my test window is Calculator 3.14.1 cnee --record --mouse --keyboard --time 5 --store-mouse-position --first-last --stop-key h -o xnee.xns -e xnee_record.log -v;The result is, xnee.xns lists every mouse movement.But I only need to record the mouse location when there is a mouse button event. it seems --first-last does not work. How can I make it work?I use
hardware HP pavillion 20. The only avalible resolution is 1600x900. /etc/debian_version 8.1 GNOME Terminal 3.14.1 xnee 3.19
I'm running FC12 and GNOME.If I move the physical mouse about one inch, the mouse pointer moves across the entire screen.That's way too fast and way to sensitive.I prefer the mouse pointer to move far less distance on the screen when the physical mouse is moved.
From System->Preferences->Mouse, I set the various mouse Pointer Speed acceleration and Sensitivity to Slow, Fast, Low, High, and and I couldn't get it any better. At the least sensitive settings. if I move the physical mouse one inch, the mouse pointer moves across the entire screen.How can make the mouse pointer less sensitive to mouse movements?
