I am running Thunderbird version 3.1.7 on LinuxMint10 (Julia) and when I save emails to disk the full headers are included, which is annoying. Other distros like PCLinuxOS running the same version of TB exclude headers.
View 4 RepliesI've suddenly stopped getting emails from logwatch which runs on an Ubuntu server daily using cron.After a good day or so of troubleshooting, I was able to establish that it was the 'Service = named' line in my logwatch.conf file, which was stopping the emails from coming through. If I commented out this line, the logwatch emails come through with no issues, uncomment, and I don't get an email. I don't get any error from logwatch itself when I run it, even with '--debug high', leading me to think that my email configuration is setup ok, at least. Furthermore, I tried running logwatch with '--output file --format html' and logwatch produces a valid html file.
I then thought: "Could I have a entry in my Bind/named log files which could be rejected by my ISP's smtp server?". So, (to the best of my knowledge) I cleared out the log files in /var/log that contained messages from named. I then ran logwatch (including the named service in my logwatch.conf file) and I got an email through, with a pretty much empty named section, which is exactly what I anticipated. Great! - it's fixed.
So, the cron.daily ran early this morning, but still no email in my inbox when I got up. I then tried to run 'logwatch --Range today' and lo and behold, I got a logwatch report email, which included a named section, with log entries in there. So it seems that something that's been logged by named overnight to my logfiles (i.e. '--Range yesterday') has caused issues again with logwatch's ability to send reports through my ISP's smtp servers.
I'm running mythbuntu 9.04 and am having an issue with disk space.
I try 'rm' various log files but the space I free up lasts less than a minute before the disk reports as being full once more.
df -Th | sort gives:
Quote:
/dev/sda1 ext3 8.3G 7.9G 0 100% /
/dev/sda6 ext3 138G 125G 6.3G 96% /music
/dev/sda7 xfs 783G 617G 167G 79% /videos
/dev/sdb2 xfs 344G 242G 103G 71% /recordings
[Code]....
There's nothing enormous in /var/log and my trash and the root trash are empty.
why size and used fields are not the same despite 100% usage being reported on sda1..
I have just started Learning Programming, & for that i study this link > [URL]
I want to save this page but (not only single page) , I want to save the Whole page including the links.....i don't want to save each page, i want to save it as a whole so that if i am not online, the page+its links should be read exactly as via INTERNET...
I Repeat... I don't want to save each page 1-by-1, perhaps their is a method so that i can save whole page, and in ofline-State if i open that page, and click on the link in the save page, it should be loaded...
Moreover, i don't want to download a book etc...
Is there a way to determine the total disk space used by all emails in thunderbird?
View 2 Replies View RelatedIve also tried downloading RPMs to a usb stick and it said it was the wrong ones for my machine.
How do i find out if my machine is x32 x64 x86?
Anyway im trying to install kernel headers and devel from the fedora installation disk but i dont know how to get to the cdrom thru terminal as i cant copy the RPMs to desktop by drag n drop or using software installer.
I dont have an internet connection to the pc so i cant use yum (which would make things so much easier) so can anyone tell me how how to install these packages thru terminal?
i'm having issues in trying to copy files from one hard drive to another. The destination disk is not full yet I get the message "Error creating directory: No space left on device".
View 4 Replies View RelatedI have a Asus Netbook that came with Windows xp already installed, I want to format my hard drive and install Ubuntu and not dual boot with windows but I would like to save windows xp thats on my netbook to a disk just in case I do decide later to switch back to windows
View 6 Replies View RelatedI'm on 10.04. Cloning a vdi yesterday, I managed to produce a 'disk is almost full' message. Deleted some movies and wanted to try the cloning again today, but starting my laptop, I get an ugly gray login screen.When I login, it looks almost good (some console writing to fast to read) but then it falls back to login informing me 'Install Problem: The configuration defaults for GNOME Power Manager have not been installed correctly."
View 1 Replies View RelatedSo i just installed ubuntu server 8.04. Got everything set up and started putting my files on it. 6 Hours of copying later I get a message saying that my Disk is full. This is a 1.5TB HD and it stopped copying at 269GB. fdisk shows the drive as 1.5TB, and ls -sh shows that only 269GB have been used. Yet I cannot add any more files. The other weird thing is that df doesn't show the hard drive, yet I know it is mounted and accessible. If it makes a difference I have it formatted to ext3.
View 2 Replies View RelatedI can't seem to fin the command that tells how much space is used/free.
View 5 Replies View Relatedhere is the problem I am facing. My system [ fedora 11 with all updates installed as of nov 27] suffered a power interuption.[ well that happens I dont have an UPS] here is what happen then
1- when i restarted i get stuck with the "install problem with gnome power manager" that prevent the desktop to launch. I found this to be well documented and I ssh'd [ for some reason cannot get the consol] my system and tried as root to remove gnome-power manager with yum remove power manager ... well the command hang out doing nothing and I have to close the session and reconnect... CTRL C dont even work.
So I had another problem. I started checking my system and when I tried df, I received the shocking following answer
[Code]....
I have a little/big problem. This morning, I dont know why, but suddently my hard disk was full. I thougt that the temporary space grew too mucho and I thought if I restart my machine, everything would be nice but no. Now in the logging screen comes messages that some components cant be load and so I can't go in my Fedora
I tried to access to my partition with Knoppix-livecd and free some space, but it seems that Knoppix can't access to that partition. I have installed fedora 12.
Could anyone recommend a method of creating a full disk image. I have the Acronis bootable media, would this work to backup Linux partitions? I'm thinking that Acronis doesn't know or care what is written to the disk as it works at a lower level.
View 7 Replies View RelatedThe only reason why I don't use Linux (even though I prefer Linux over Windows, and can do everything faster and more efficiently) is because each time I try to learn about dm-crypt I give up.
Can someone point me in the right direction for full OTFE on Linux (like TrueCrypt)?
I am trying to upgrade to 9.10 but it fails because the disk is full. I am running a Dell Mini with 16GB SSD...so there isn't a lot of free space to begin with. Added to that, I have some hefty applications (rosegarden, audacity, skype, etc) which I kind of need. Am I better off just sticking to 9.04? Are there any good ways to clean up the system and get rid of stuff that might be sticking around? I did apt-get clean and it didn't clean enough.
View 6 Replies View RelatedI am using default USB Startup disk creator for spreading new versions of ubuntu on all my machines. In 10.04, I point it to GnomeLiveCD of 600Mb, and usual 4Gb flash drive. And the application says I have not enough space.4Gb is empty, fresh formatted, with right partiion. It is OK in short. Do somebody know what to do with app?
View 3 Replies View RelatedThe disk on this machine was full (0 bytes available). I rebooted and now it just goes to a blank screen. I thought I might need to free up some space for something, so I booted to a live cd and freed up some space. Still boots to a blank black screen.
View 4 Replies View RelatedI am having trouble with my HDD.
Here is how Disk Usage Analyzer looks like:
But I can not find any files there to delete.
Trash is also clean.
Code:
server:/home/mal # cd /backup/
server:/backup # du -hc *
17G export
4.0K lost+found
20M rman
8.0K sqlnet.log
4.0K test.sh
[Code]...
I do know about cold boot attacks. But I ran across a couple of posts/websites that had me wonder if it is possible, without the passphrase, to just remove the encryption?
View 4 Replies View RelatedIn fact I'm not the systems administrator, but I have a strange problem unzipping a file. I think is a problem of memory or swap space or somethin similar, but I'm going explain the problem in detail: Distribution: Red Hat Enterprise Linux ES release 4 (Nahant Update 3) I'm connected as root. I have this zipped file: -rw-r--r-- 1 root root 678183271 abr 7 15:30 Master032010.zip it contains a 2,4G file
[Code]...
How to refresh and reload the list of email into MUTT ? Which key?
Additional: how to go to folder SENT of gmail ? and configureation eventually?
I would like to configure my Debian Jessie system in this way.
Two partitions:
1) /boot on /dev/sda1
2) everything else on /dev/sda2
I want to encrypt the second partition with LUKS. And then install over it a LVM volume. Inside the LVM volume i will create the / (root), /var, /opt and /home virtual partitions. In this way, i'll get asked only once for the password to decrypt all partitions. Because if i don't use LVM, then i'll get asked for the password for each encrypted partition.
I can follow and understand almost everything of this HOW-TO for Archlinux: [URL] ....
Only two passages are unclear to me:
1) Configuring mkinitcpio
I don't understand what i should do here in order to complete this. What should i do in Debian to configure "mkinitcpio"? what is the equivalent thing to do here?
I thought that the kernel would automatically recompile itself with all installed modules on the Debian system, once cryptosetup/LUKS or LVM2 get installed.
2) Configuring the boot loader
I don't understand what should i write in /etc/default/grub. Will GRUB automatically load the LUKS and LVM2 modules? Also, I don't think that i could boot the system in this way:
cryptdevice=/dev/sda2:LVM root=/dev/mapper/LVM-????
Actually the "root=" volume is the whole volume to mount as LVM. It isn't the final root partition.
With all the talk about disk encryption for Apple devices, I wanted to ask about how full disk encryption compares between debian linux and mac OS X. Is the code for debian linux fully available for people to inspect for flaws or backdoors? Apparently although part of the encryption code is available for OS X the full code for Filevault 2 is not public. What are the advantages and disadvantages of each method of encryption for each operating system?
View 8 Replies View RelatedWhenever I launc YaST software manager it keeps telling me my disk is full.
It's quite right, it's just that the disk in question is a mounted openSUSE CD iso which is 100% full - as it should be.
Is there any way of stopping YaST doing this - I'd like to be able to tell YaST which fs to ignore but a even a full stop would be better than a warning every time.
I downloaded the Lubuntu iso from http://lubuntu.net. It is 521MB.How much disk space would a full install use? 2GB? 3GB?
View 3 Replies View RelatedFor some reason I can't find any documentation re: the algorithm(s) used by Ubuntu to encrypt the filesystem... Anyone know what it is?? AES?
View 2 Replies View RelatedOn a ubuntu 9.10 server. The problem is that when I try to mkdir in /var/local/ it says th disk is full but running df -h outputs:
Code:
I cannot see what's eating up my space in /var.
I have a bunch of pictures that I thought I had backed up but as it turns out I didn't, the problem is I formatted the drive they were on.
It is a 1TB hard drive, and it was running Ubuntu 10.10 using full disk encryption from the alternate install CD. After formatting, I installed Ubuntu Server 10.10, also using full disk encryption.
I know the encryption key for both installs (and the keys in fact are the same).
I have turned off the machine, and have stopped writing to the disk. I am hoping because it is a 1TB drive, and I have only written over it with 2GB of data, that there is a chance I can recover the data.