Software :: Updating Files With Rsync Using --append --partial Options?
May 16, 2010
I'm trying to download a large (~18Gb) file using rsync from a server to a client, but the server, for an unknown reason, kills the connection after a time, when I've downloaded only about 8-10Gb.How can I continue the downloading of this file?
I've tried using the --partial option, but it just restarts the download from zero again. I've tried adding "--append" but I get "rsync: on remote machine: --append: unknown option" because the version is 2.6.3 on the server (and 3.0.6 on the client). I don't have control of the version on the server.
View 1 Replies
ADVERTISEMENT
Sep 18, 2009
I just tried to sync files from one server to another. After the sync process, I found the files are bigger than original ones.
I looked up the web and found someone mentions the rsync daemon. So I have to run the daemon on one server before I run the rsync?
The command I used is rsync --partial --progress -r source destination
View 1 Replies
View Related
Jul 21, 2010
use rsync to cp such files and dirs under /var/www/html/mydir directory but these two files(/dir4/1.html /dir4/2.html) cant rsync to dest mechine.
rsync configure file,below...
View 2 Replies
View Related
Sep 1, 2010
I am fairly new to linux but I want to write a function to find any file with only a partial name. I can only use sh shell and busybox applets for this.I could do something like the sad code below...
Code:
TEST_ONE=$(find /path/to/directory -name *$1*)
TEST_TWO=$(find /path/to/directory -name $1*)
TEST_THREE=$(find /path/to/directory -name *$1)
[code]....
fi I just made that up but obviously it is pretty bad I'm sure there is a much better way to do it but I just can't think of a way. I also would like to have the file found even if capital letters are used and the file is all lower case.
View 2 Replies
View Related
Feb 21, 2011
I have a existing zipped file , I want to use gzip command to append some files to it , I tried man gzip but can't find the key word "append" , can advise how can I do it ?
View 1 Replies
View Related
Aug 22, 2009
eed to make a script to append a line to the bottom of multiple files (only certain files, but 100's spread over directories).Doing a find replace inside multiple files is easy, I use the followingfind /base/dir -name "*.txt" -exec perl -pi -w -e 's/FIND/REPLACE/g;' {} ;So I tried doing the followingfind /base/dir -name "*.txt" -exec echo "Append this" >> {} ;However this just appends all the text into a file called "{}". Whereas {} should be replaced with each file that's found.
View 1 Replies
View Related
Mar 24, 2011
How to list all the files that don't contain pattern1 and append a new line (pattern1) to those files before pattern2 only once.
pattern1 = /var/script/showMessage.sh
pattern2 = ;;
Code:
grep -c 'pattern1' /var/script/*_cam* | grep :0 | add pattern1 before pattern2 in each file loacted before.
View 10 Replies
View Related
Nov 22, 2010
I wanted to be as clear as possible. I have to add hundreds of new servers to hundreds of configuration files in Nagios. Here is a sample structure:
servers.txt has:
SERVER3
SERVER4
[code]....
View 10 Replies
View Related
Mar 4, 2011
Will unzipping always append files if the directories already exist? What about tar?
I unzipped an archive the archive had 3 folders and dozens of subfolders within those. app, skin, js
The folder I unzipped it to also already had those 3 folders as well as many child folders etc.
My website is still working so I'm just wondering. Is this safe or is there anything I should worry about. The other option was to manually upload each file manually that is in those 3 folders and the dozens of sub folders.
View 1 Replies
View Related
Dec 26, 2009
If I need to append a set (or sets) of data to a file(or files) on remote hosts what is the best mechanism by which to do that? My first thought was ssh but the command syntax to append to a remote file isn't clear to me. Can anyone point me in the right direction here?
View 4 Replies
View Related
Jun 18, 2010
I'm setting up a network between 2 pc's where the one should act like "file server" and a normal pc to surf on internet.called ORLA-DESKTOP and the other pc is called OLGA-DESKTOP a pc connecting to the server and automounting the shared folder to the desktop Both pc's run ubuntu 10.04 Lucid Lynx The shared folder is located on the server in /home/orla/svenson
ORLA-DESKTOP have 2 users "olga" and "orla" in a group called "svenson"
OLGA-DESKTOP have 1 registered user "olga" also in group called "svenson"
users on ORLA-DESKTOP can read/write/append and so on and fully manage everything in the shared folder.But on OLGA-DESKTOP the user can make a file on the pc and then drag'n'drop the file the the shared folder, and can also delete files in the shared folder. but cannot create a file directly into the folder like on ORLA-DESKTOP I have 3 configuration files made. 2 for automounting, Located on OLGA-DESKTOP 1 for samba server configurations located on the server ORLA-DESKTOP
The first one is /etc/fstab
Code:
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
[code]....
To sum it all up the real problem is that OLGA-DESKTOP can't append to files in the shared folder. but users on the server have no troubles doing it..
View 6 Replies
View Related
Apr 26, 2010
I want to know how to retrival partial files from a lto 4 tape instead of retrieving the complete tape.
View 2 Replies
View Related
Jan 15, 2010
may be an advanced question but I need to know how to do this. Here at work I am in charge of recruiting and we have about 1,000 resumes in already. All of the resumes are in a .pdf format. I need to rename every .pdf in the following format:{firstnameLastname}.pdfThe only way I know how to do this is to convert all the .pdf files to text, extract the name out of the first few lines of text, import into excel, and then use VBA to rename the files in mass:Here is my logic so far:~Deskop/a = houses all the .pdfresumesOpen terminal: Code: cd ~/Desktop/afor f in *.pdf; do pdftotext -raw $f; done That will convert all of the preceding resumes into text filesNow I would like to append the name of the text file into the last line of the text file. So, for example, for Resume1.txt, I want to append "Resume1.txt" to the last line within Resume1.txt. So after I run the command I open Resume1.txt and on the last line within I want to see "Resume1.txt" on the last line, at the end of the resume.How can I do this? I would like to use a loop and have the terminal append the filename to the body of the text file until all of the have been appended.
View 1 Replies
View Related
Sep 9, 2011
My Source folder contains 424.8 GB in 502,474 files. My Destination folder was created fresh, and after the copy contains 394.0 GB in 486.514 files. I am running it as grsync with root authority. The only options are to preserve time, permissions, owner and group., and to produce a verose output and transfer progress. There are no exceptions specified to skip any files.
The rsync command is this:
rsync -r -t -p -o -g -v --progress -c -l -H -D -s /mnt/Backups/monthly.3/ /mnt/EX-Fantom/monthly.3/
I have run it again to give it a chance to get it right. Same result. The source is in an rsnapshot folder, but this is the first backup, the original, containing only whole files, not links.
View 3 Replies
View Related
Mar 2, 2010
I'm trying to using rsync to backup some files, about half a TB. It's now it a state where it keeps sending the same files everytime it runs. for example:
rsync -av /data/source/* user@host:/data/dest
sending incremental file list
source/file1.txt
source/file2.txt
I then verify those files are copied over. then the next time it runs it does the same thing
rsync -av /data/source/* user@host:/data/dest
sending incremental file list
source/file1.txt
source/file2.txt
any idea why it's getting stuck on these files? I've tried to wipe the whole dest directory out and start over but no luck.
View 2 Replies
View Related
Jul 27, 2011
I have two directories, dirA whicht contains N gb of data and dirB which is supposed to contain only the newest M gb of data from dirA. When files are added to dirA, they sould also be added to dirB, while the oldest files in dirB should be deleted.Is that possible with rsync? or any other software?
View 1 Replies
View Related
Mar 15, 2010
So I just used rsync to backup about 400gb of data to my NAS. Look just over a day to complete, which is what I figured. I decided I should run rsync again to see how its going to handle comparing and only adding new files to the remote location. So I added a few new files and then ran the backup again. Well rsync is trying to do a complete copy of all of my original data, even though they have not changed.
Is there a way that I can tell rsync to compare the two directories and only add the new files and delete the ones that are no longer in the original location?
Here is command that I am running:
Code:
sudo rsync -azvv --progress --stats /media/sda1/multimedia/movies /home/codeblue/NAS_Share_Point
View 9 Replies
View Related
Jun 9, 2011
I am running Ubuntu 10.04. I am transferring roughly 62 GB of data libraries to my 84 GB /home partition. I'm using rsync because scp kept stalling, and I had to restart it over and over. Things were going great until recently when it began to show an error: "failed: No space left on device (28)" These are the things I've done so far: Used the GUI to find out how much I have copied so far: 5,149,552 which take up 30.2 GB. df -h, it tells me that my /home partition is 56% used, and that I have 33 GB available. (42 GB used out of 78 GB with 33 GB available) Also, none of my other partitions are anywhere near 100%. the /home partition is the most-used and it's only a little over half-full. du -s in the directory where I'm copying all of this: it also returned 42206500. Additionally, when I try to save screen captures, it sometimes fails with a "device full" error. What's going on? Am I really out of space? Why doesn't it show me that I'm out of space?
Is there a hidden temp file that rsync uses that just got too full? I did a little research on wikipedia and it said that ext4 has a 64,000 directory limit. Could it be that I somehow broke that limit with all of these files? Solution: not enough inodes for the vast amount of subdirectories on hard drive. This wasn't an RSYNC problem, rather, a partition configuration issue. To check inode usage: df -i If you want to add any inodes, you will need to backup your partition and format it using mke2fs (man mke2fs). Be sure to change the respective inode setting.
View 9 Replies
View Related
Jul 12, 2011
rsync -r -v -e ssh root@nn.nn.nn.nn:/usr/local/websites/* /usr/local/websites and each time I run it it copies everything - all files. I thought rsync was only supposed to copy files that had been added or modified.
View 3 Replies
View Related
May 20, 2010
I've 15 web servers (in private network) running RHEL, Apache. Needs to sync web files between them. each server is accessible to each other via public key (with passphares).
1) Main server is web1 (where dev upload files initially). So I can make all other servers accessible by web1 without password/passphares and run rsync periodically to update files between them. But security is an issue here as all servers will become easily accessible.
2) Run rsync daemon in all other servers (except web1) on designated port and run rsync command from web1 to sync files. This will do the work but running daemon in all servers might increase overhead and making sure that daemon is running all the time etc. are my concern for this implementation.
View 8 Replies
View Related
Oct 23, 2010
I maintain some packages my synchronized with my remote server but I have a problem ... is very hard to understand, time it works, time not works. When not working the following happens:
Code:
[root@xxxx repository]# rsync -avzP --delete-after --partial-dir=.partial-dir rsync://xxxx@xxx.xx.xxx.xxx/repositorio 13.1
[code]...
View 7 Replies
View Related
Jan 11, 2011
During my backups I'm finding that rsync is copying all files, instead of just what's changed.
I'm rsyncing between 2 USB external hard drives. One hard drive is FAT32 and one is NTFS. I've examined some of the files and believe that the difference is that there's a 1-second modtime difference developing in some of the files somehow.
Here's an example. These duplicity files were synced from /media/BACKUPHD (the NTFS drive) to /media/VIDEOHD (the FAT32 drive) only a few hours ago this morning. They have not been touched or changed since then, but that 1-second difference in their time stamps has appeared:
Code:
tim@localhost:~> stat /media/BACKUPHD/backups/duplicity/duplicity-full.20110107T145955Z.vol10.difftar.gpg File: `/media/BACKUPHD/backups/duplicity/duplicity-full.20110107T145955Z.vol10.difftar.gpg'
[Code]....
View 8 Replies
View Related
Nov 8, 2010
What would be the easiest way to go about rsyncing the n newest files in a directory to a remote server?
View 2 Replies
View Related
Mar 1, 2010
I am running this command,
Code:
rsync -vrl --progress --stats --perms --delete --exclude '*~' --exclude 'Music' --exclude 'server' --exclude 'Downloads' --exclude 'Ubuntu One' --exclude 'Videos' /home/dave/ /media/server/backup/desktop/dave
It transfers files that remain unchanged. The one that I notice every time is
Code:
.VirtualBox/HardDisks/anOS.vdi
I have several OSes installed in VirtualBox, so this takes a very long time.
View 1 Replies
View Related
Mar 1, 2010
I have Ubuntu on both my laptop and desktop machines, both are connected to the same network. I back up the laptop to the desktop by running the following on the laptop:
rsync -avv --stats /home/alisdt alisdt@xxx.xxx.xxx.xxx:/home/alisdt/laptop_backup (with the IP address of the desktop instead of the many x, obviously). Whenever rsync hits a large file (greater than a few MB), the network use rapidly drops to ~60KB/s (that's kilobytes not bits). When I copy the same file to the same place using scp, I get > 500KB/s throughout the transfer. Things I've tried:
* mounting the desktop home dir on the laptop using SSHFS -- a simple file copy is fast, rsync is still slow
* ditto with NFS
* rsync --whole-file option, in case the delta-transfer algorithm was choking on large files
* rsync --inplace option
* HPN-SSH (http://www.psc.edu/networking/projects/hpn-ssh/) to enable dynamic window and unencrypted bulk transfer, just in case it was some ssh bottleneck I think it's either an rsync application problem, or a network problem that is only affecting rsync. Any ideas, or other ideas of what I can try to debug? In case it's relevant, I'm using 9.04 on both machines. (A standing bug prevents me from upgrading the laptop, and I haven't bothered to upgrade the desktop).
View 3 Replies
View Related
May 31, 2010
well, i know ther are issues when using rsync to copy files to ntfs partition like file permission blah blah. the thing is, i need to backup my music files periodically onto a ntfs partition from ext4. i really dont care about file permissions or any other stuff. when i use rsync, it should update the mp3 files on my ntfs (external) disc with the new ones.can i give a go with this operation? i have lot more important files on the external disc and i dont want this rsync corrupt or delete those files coz they are highly important files.
View 2 Replies
View Related
May 4, 2011
I built a script that downloads my podcasts using Gpodder into the directory /HOME/SHARED/PODCASTS/ (with a subdirectory for each podcast)The script then selects the latest episode and copies it over to a target directory (it empies the target directory first and copies over everything) I want to use RSYNC to make sure the 'not so fresh' episodes get deleted and the "fresh" episodes get copied over. Then dropbox can sync the "new" files over to the cloud where i can access them via my ipad/iphone (whole other story).The thing is : i've replaced the cp command with the RSYNC command and now the script is acting strangely.
It selects and sync's over the "newest" podcasts to the destination directory. Then it suddenly DELETES all the episodes in the destination directory and copies over the three last files.
View 8 Replies
View Related
Sep 8, 2010
I'm using the command below to sync two directories. Problem is insted of deleting the files on the target directory it simply appends a ~ character at the end of the file name. Not sure why this is happening?I'd like to have all deletes on the source replicated on target.
View 2 Replies
View Related
Apr 11, 2011
This is a quick one, I don't have any problems yet, I just want to check that this is going to do what I think it is. I added the line
Code:
00 01 * * * rsync -avz --delete /local-storage /mnt/usbackup
to my crontab file, am I to understand that this will backup /local-storage to my external
[code]...
View 4 Replies
View Related
Jun 8, 2010
I was going to do a rsync -r -a -z -v -p -e sshto move some files frome server to another, but then realized all I really need are files which have dates starting June 1, 2008 to current. Is there a way to have rsync only sync those files?he directory structure that's my source goes all the way back to 2004.
View 5 Replies
View Related
