rsync -r -v -e ssh root@nn.nn.nn.nn:/usr/local/websites/* /usr/local/websites and each time I run it it copies everything - all files. I thought rsync was only supposed to copy files that had been added or modified.
View 3 RepliesI'm trying to set up rsync to only copy new songs from my computer to another. I'm using the "--ignore-existing" argument, but it appears to copy all files anyway. The client (source) is Windows 7 64-bit running DeltaCopy Client and the server (destination) is Synology DS410 (running rsyncd).
Here is the syntax:
As an example, I have two servers, sm-i222 and fileserv. sm-i222 is a Win2k3 system running cygwin. fileserv is a linux box running RHEL 4.7. sm-i222 maps /cygdrive/c to the c: drive and /cygdrive/d maps to the d: drive(actually a single 4TB RAID). from the sm-i222 server /cygdrive/c I call a small script from the crontab. The internal IP for fileserv is 10.0.0.7. See below.
cd /cygdrive/d/fileserv/home
rm -rf /cygdrive/d/fileserv/home/*
rsync -avz -e 'ssh -c blowfish' root@10.0.0.7:/home/* .
These three lines perform well in that they make a full transfer of the fileserv:/home/ directory on fileserv to the appropriate place on sm-i222 using rsync. I use rsync instead of scp because I have to traverse subdirectories and symbolic links in the /home/... filesystem on fileserv. What I'm looking to do is use rsync to do an incremental transfer/backup of only the files that have changed since the last full backup. I'll manage the times I do this manually or in crontab. A colleague says this is do-able, but not how. Rsync.org says this is do-able but not how. Cygwin says this is do-able... see rsync.org. I believe what I'm looking for is a single rsync line like I have above that only transfers the changed files on fileserv to sm-i222.
I just tried to sync files from one server to another. After the sync process, I found the files are bigger than original ones.
I looked up the web and found someone mentions the rsync daemon. So I have to run the daemon on one server before I run the rsync?
The command I used is rsync --partial --progress -r source destination
use rsync to cp such files and dirs under /var/www/html/mydir directory but these two files(/dir4/1.html /dir4/2.html) cant rsync to dest mechine.
rsync configure file,below...
My ubuntu started out right, it copies files 3/4 of the way through and reads ready when you areThe foward button does not let me click it
View 1 Replies View RelatedI am trying to copy the files from my WHS disk to my Ubuntu Server disk. I have the windows disk mounted at /media/WINDOWS and I want to transfer to /storage so I ran;Code:sudo cp -r /media/WINDOWS /storageIt takes about 4-5 seconds and is complete, but there is about 500 GB worth of data there so I know it didn't really copy everything over. When I look at the files in console it shows them, but when I look at the /storage through SAMBA on my Windows machine, it only shows the directories.?
View 9 Replies View RelatedI have a directory with some data files in it. I did an md5sum find, and built an index of all the files contained:
Code:
find ./* -type f -print0 | xargs --null md5sum > MD5SUM
Now, based on my new index, I want to find the copies of these files as they appear in a new directory, where they have been renamed and reorganized.
I'm trying to using rsync to backup some files, about half a TB. It's now it a state where it keeps sending the same files everytime it runs. for example:
rsync -av /data/source/* user@host:/data/dest
sending incremental file list
source/file1.txt
source/file2.txt
I then verify those files are copied over. then the next time it runs it does the same thing
rsync -av /data/source/* user@host:/data/dest
sending incremental file list
source/file1.txt
source/file2.txt
any idea why it's getting stuck on these files? I've tried to wipe the whole dest directory out and start over but no luck.
I have two directories, dirA whicht contains N gb of data and dirB which is supposed to contain only the newest M gb of data from dirA. When files are added to dirA, they sould also be added to dirB, while the oldest files in dirB should be deleted.Is that possible with rsync? or any other software?
View 1 Replies View RelatedI made a Bash script that is fired by a Cron job every morning. It dumps an SVN backup on some Samba shared drive. I would like to know how I can make sure the job worked correctly without having to verify the shared drive every morning. Right now, I take the job's output, save it to a log file and send this file by email. But the ouput isn't so great.
[Code]....
What would be the easiest way to go about rsyncing the n newest files in a directory to a remote server?
View 2 Replies View RelatedI'm using the command below to sync two directories. Problem is insted of deleting the files on the target directory it simply appends a ~ character at the end of the file name. Not sure why this is happening?I'd like to have all deletes on the source replicated on target.
View 2 Replies View RelatedThis is a quick one, I don't have any problems yet, I just want to check that this is going to do what I think it is. I added the line
Code:
00 01 * * * rsync -avz --delete /local-storage /mnt/usbackup
to my crontab file, am I to understand that this will backup /local-storage to my external
[code]...
I was going to do a rsync -r -a -z -v -p -e sshto move some files frome server to another, but then realized all I really need are files which have dates starting June 1, 2008 to current. Is there a way to have rsync only sync those files?he directory structure that's my source goes all the way back to 2004.
View 5 Replies View RelatedIf transfer all files under a directory by rsync, what is the order that rsync determines to transfer the files one by one?At first it looked like rsync transfers files in alphabetical order, but later I found rsync skipped some files in the first sweep through the alphabetic order, and then went back to transfer files that were skipped in the first time and this time still in alphabetic order.
View 1 Replies View RelatedI was wondering if there is a way to tell rsync to only apply changes (delete, overwrite,create) only if all files in the file list transferred successfully.Just to clarify, this would essentially be putting a transaction around the transfer.
View 3 Replies View RelatedRecently i am trying to check on the rsync speed for single file(2.4GB iso) directory ( 900MB directory with files inside ) When i run the rsync for single file: the speed i get is average 50MBps However, for a directory: average speed is 10MBps Is there any reason behind this ? i tried to google but unable to get the concept.
View 2 Replies View RelatedFor backup purposes, I have been trying to find out a solution for Rsync -avr sourcefolder targetfolder with Skipping 0 bytes files option.
However it seems that they are no solutions. Would someone have an idea, to skip to source files into the sourcefolder that have no content, ie. 0 bytes?
I have recently purchased an external hard drive in order to backup my home partition. In my PC I have a "1.5T" drive with several partitions on it, containing OSes and the home partition. The home partition is 1.3T according to df, the external drive contains one partition that spans the entire disk,df reports it as 1.4T in size. Both partitions are ext3. When I use rsync to copy files from the home partition to the external partition, the external disk becomes full, despite the destination - supposedly - being larger than the source. I don't understand why copying files from one partition to a slightly bigger partition should need more space than on the source partition. Does anyone know what is happening ?
Details : I created the partition on the external drive with gparted; gparted reported it the already have several gigabytes in used space immediately after the partitions creation - I thought at the time that this must be normal. The home partition contains many files of all sorts, including lots of big audio and video files. If you are wondering, for all my important files this external disk is only secondary backup, as they are also backed up to the "internet".
These are the mount points :
/mnt/tmp/ : home partition, /dev/sdb6
/mnt/external/ : external partition, /dev/sdc1
I used rsync to copy the files, I know there are more efficient ways to do this, but I wanted to use the same command that I will subsequently run to sync the backup.
rsync -av --progress --stats --recursive --perms --links --delete /mnt/tmp/ /mnt/external/
Next I tried adding the --sparse switch, as I was wondering if the problem may come form sparse files. I don't know however if rsync would go back and shrink the sparse file by just adding the switch and executing the command. I also added --one-file-system, for good measure. Here is what I ran next :
rsync -av --progress --stats --sparse --one-file-system --recursive --perms --links --delete /mnt/tmp/ /mnt/external/
I tried an fsck on the home partition :
fsck -f /dev/sdb6
This is the output from the last rsync :
rsync: writefd_unbuffered failed to write 4 bytes to socket [sender]: Broken pipe (32)
rsync: write failed on "abcd.avi": No space left on device (28)
rsync error: error in file IO (code 11) at receiver.c(302) [receiver=3.0.6]
[code]....
Looking at the destination after a partial copy seems to indicate that the problem is not symbolic links being "expanded". I have not checked the source filesystem for sparse files, nor the destination to see if these files could be larger there, as this does not seem trivial.
Here is some additional info :
$ df /mnt/tmp/
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sdb6 1415342836 1414173740 369096 100% /mnt/tmp
[code]....
We have an rsync cron job set up to mirror all the files in a "..dashtdocsdocs" folder to the same folder on another server. It copies all the files over correctly and deletes any files in the "docs" directory that aren't in the sending directory, but it also deletes any files we put in the target directory's parent folder (..dashtdocs or other subfolders like ..dashtdocsimages) even though they've been excluded in the .rsync-filter file.
Here's our current rsync .sh:
/usr/local/bin/rsync --stats -qPzrtpl --delete --password-file=/var/run/.appprodrsync --log-file=/export/home
/webuser/logs/rsync-extranet-log -FF /export/home/ appprodrsync@appprod::dprweb_extranet/ > /export/home/webuser/logs/rsync-extranet-output 2>&1
[code]....
So for example server A has ..dashtdocsdocs and ..dashtdocsimages. Server B has ..dashtdocsdocs but if I manually copy the images folder over to ..dashtdocsimages, the images folder gets deleted from the target directory every time rsync runs.
A: ..dashtdocsdocs
..dashtdocsimages
B: ..dashtdocsdocs
..dashtdocsimages (<-- gets deleted everytime rsync runs)
I'd like to keep just the docs directory synched and update other folders manually, but they keep getting deleted. It looks to me like it's running a delete-excluded option, but that option wasn't used.
I have a big iso image which is currently being downloaded by a torrent client with space-reservation turned on: that means, file size is not changing while some chunks in in (4 Mib) are constantly changing because of a download.
At 90% download I do the initial rsync to save time later:
$ rsync -Ph DVD.iso /media/another-hdd/
sending incremental file list
DVD.iso
[Code]....
Then, when the file's fully downloaded, I rsync again:
total size is 2.60G speedup is 1.00
Speedup=1 says delta-transfer was not used, although 90% of the file has not changed, target dir is on another FS and copying takes several minutes. Why doen't it try to speedup the transfer?! How can I force rsync to use delta-transfer?
I have rsync error message for this command,
Quote:
rsync -avr --delete --exclude lampp/tmp/* /opt/* /backup/opt/
rsync -avr --delete --exclude data/session/* /var/www/html/dmcatholic/* /backup/dmcatholic/
The error message is here.
[code]....
sent 1917154 bytes received 384128 bytes 5731.71 bytes/sec total size is 12220966785 speedup is 5310.50 rsync error: some files could not be transferred (code 23) at main.c(892) [sender=2.6.8]
i would like to find and backup all *.mp4 files from /Pictures and its sub-directories and move them to a single directory on a remote. I can find and move the files but I don't want the directory structure...just the files to be placed in the remote directory.
To find my files I use
rsync -r -a -v -e "ssh -l user" --delete --include '*/' --include '*.mp4' --exclude '*' /home/drew/Pictures/ remoteserver:/Users/drew/mp4
but this creates all the subdirectories
I also tried
find ~/Pictures -name "*.mp4" -exec rsync -r -a -v -e "ssh -l user" --delete {} remote:/Users/drew/mp4 ;
This works but takes forever
I recently replaced my windows fileserver with one running Ubuntu. One thing I've noticed (which is a annoying) is that when I copy files between two samba shares from my windows machine, it copies the file through my PC to the new destination. On windows shares it just did some sort of local copy (ie it took about 2 seconds) rather than 3-4 minutes. Is this the normal behaviour, is there any way around it on Linux
View 5 Replies View RelatedI want to run rsync on server A to copy all files from Server B when they are newer than 7 days.(find . -mtime -7) I don't want to delete the files on Server B.
View 2 Replies View RelatedI've been trying to rsync only files with mca in their filename but it's sending the whole lot across.
Code:
rsync -dtv --include='mca*' /source/source/source/source/source/source/source/ /dest/dest/dest/
Is there an open source application that can download e-mails from a generic POP mail server, keep a copy of the mails locally and then deliver copies to multiple accounts on a LAN? I have a friend who uses a group e-mail account, and more than one person is always hooked onto that account. The problem is they cannot leave e-mail on the server, as it eats out their webhosting space, but if someone downloads a message in Outlook, the other users do not see that message.
View 1 Replies View RelatedI want to take a graphics file and make 10 copies of it to the same directory, each with 001, 002, or some such designation at the end of each file name so they have discrete files names. Is this possible using cp?
View 12 Replies View RelatedMy grandson got a little free time on my login screen. When I got back I found the right half of the screen was covered with a cascade of zoomed copies of the regular login display. Each layer of the cascade larger that the previous as one moved right across the screen. When I reboot it is still there. I have tried various hotkey combinations in the hopes that I could change this, but with no result. I have looked for files which might have such a pattern saved. I found a file /usr/share/gnome-session/session-properties.ui with a promising name and inside was a series of 'child' entries, but removing all but the first child entry changed nothing. how to fix it?
View 4 Replies View Related