General :: Script To Append Lines To Multiple Files?
Aug 22, 2009
eed to make a script to append a line to the bottom of multiple files (only certain files, but 100's spread over directories).Doing a find replace inside multiple files is easy, I use the followingfind /base/dir -name "*.txt" -exec perl -pi -w -e 's/FIND/REPLACE/g;' {} ;So I tried doing the followingfind /base/dir -name "*.txt" -exec echo "Append this" >> {} ;However this just appends all the text into a file called "{}". Whereas {} should be replaced with each file that's found.
View 1 Replies
ADVERTISEMENT
Nov 22, 2010
I wanted to be as clear as possible. I have to add hundreds of new servers to hundreds of configuration files in Nagios. Here is a sample structure:
servers.txt has:
SERVER3
SERVER4
[code]....
View 10 Replies
View Related
Nov 5, 2010
Using sed, I am trying to append four commas ',,,,' at the end of lines containing the pattern 'Response' in a text file with lines such as these:
6,Pulse,50,254968,14886,NA,,,,
7,Picture,8,265157,0,1,15045,2,0,15000
7,Response,1,271553,6396,1
7,Pulse,50,274969,9812,NA,,,,
8,Picture,1,290232,0,1,15045,2,0,15000
8,Pulse,50,294969,4737,NA,,,,
[Code].....
View 1 Replies
View Related
Aug 20, 2011
I often use the rpl command to make changes to multiple html files at once. For example:
rpl -R '<br />' '<br /><br />' mydirectory However, I haven't been able to figure out how to change multiple lines. For example, let's say I want to change all occurrences of :
<br />
<br />
to:
<br />
I've tried
rpl -R '<br />
<br />' '<br />' mydirectory
but that didn't work. how to do this with rpl or some other way?
View 9 Replies
View Related
Jul 27, 2011
A function by name abc is called in many files. I want to copy all the lines with the function call to an output file.A simple grep on function name doesn't help me as the function call is spanning across multiple lines as follows:
abc(parameter1,
parameter2,
parameter3);
So I want to copy all the three lines (till semicolon) to the output file.The problem is because there are more than 200 calls for the same function and I cannot do it manually
View 2 Replies
View Related
Aug 25, 2010
I've been trying to sort this out for several hours and I?m totally lost? I?ve been searching around, but haven?t found the solution to my problem. I have a directory with 100 files. I need to copy 10 lines of each files (let?s say from line 45 to 55) into one unique file. So I guess I could use sed ?w, but I didn?t manage to write the right script. I also tried using a loop to create 100 different files, each one with the 10 lines) to concatenate them later on. But I only got 1 file, not 100.
View 12 Replies
View Related
Dec 16, 2010
How to search multiple words in multiple lines, inside a directory including sub-directory? Pls. give easy example. I want to search the files (in /xx folder and all subfolders) that have header.h included and used x() function. I tried $grep -r "header.h" | grep -r "x(" /Folder/subfolder/ > search.log
View 7 Replies
View Related
May 13, 2011
My server was hit with an injection script which has placed code across many of my clients files. I need a script that can remove a block of php code that spans multiple lines, multiple directories/files and is dynamic, meaning that part of the code changes. I think using find/sed is what I need but cannot seem to figure out how to get it to work.The following is the script that is being injected everywhere. The catch is that they have generated dynamic code at the start/end of the script. (I have commented the parts that are dynamically changing on EVERY instance).PLEASE NOTE: Directly following this script is the start of a valid php script that I do not want to delete.
<?php
//{{65281980 - DYNAMIC!!
GLOBAL $alreadyxxx;
[code]...
View 2 Replies
View Related
Apr 27, 2010
I want to (from the command line) be able to counte lines in a bunch of files of a specific type in a folder and all its sub-folders. How would I do this?
View 1 Replies
View Related
Jun 5, 2009
I want to remove duplicate or multiple similar lines from multiple files. I.e. if I have four files file1.txt file2.txt file3.txt and file4.txt and would like to find and remove similar lines from all these files keeping only one line from these similar lines. I only that uniq can be used to remove similar lines from a sorted file.
View 9 Replies
View Related
Apr 22, 2011
I have been experiencing a problem where the screen loads and after initial first few lines breaks up into multiple repetitions of lines. Reloading helps but has to be repeated when pageing down. Mail is no problem; it is supplied by my network provider. OS is openSUSE 11.2 which I update when advised. Below is a sample from the error console:
[Code]...
View 1 Replies
View Related
Feb 21, 2011
I have a existing zipped file , I want to use gzip command to append some files to it , I tried man gzip but can't find the key word "append" , can advise how can I do it ?
View 1 Replies
View Related
Apr 14, 2010
In GUI style editors, you can generally select multiple lines, press tab a few times to move all the lines across (or shift-tab to go back). I have no idea how to do this in VIM.I googled around and couldn't find any straight answer to I came here.
View 2 Replies
View Related
May 12, 2010
I have a txt file with couple of comment lines:
Number of title = !num!
#line1
#line2
#line3
I wrote a script with "sed" to replace !num! in this file, which is very straightforward. However, based on the !num!, I want to remove the number of "#" based on the !num! value. Is there an easy way to do that with "sed"; otherwise, i will have to write a script to loop through the file.
View 8 Replies
View Related
Feb 22, 2011
I've seen a few tutorials that have commands and parameters on multiple line, like the one below:
Code:
chkconfig --levels 235 mysqld on
/etc/init.d/mysqld start
I can copy and paste this in Putty, but what if I want to manually type it? If I press return, the first line gets processed, so how do I insert a new line?
View 4 Replies
View Related
Feb 3, 2011
I have done this before but i cant really recall now
I have a text file and i want to grep the word "interface" and 10 lines following it. I think there was some switch like grep -A or something ?
View 2 Replies
View Related
Jun 17, 2009
I have a list of words that I want to grep in many files to see which ones have it and which ones dont. in the text file I have all the words listed line by line, ex: list.txt:
check
try this
word1
word2
open space
list ..
I want to grep each line one by one. like I want it to
grep "check" *.log
grep "try this" *.log
grep "word1" *.log .. etc how can I do this?
and maybe write the output to a file.
View 5 Replies
View Related
Jan 23, 2010
I want to be able to remove the first character of a line when I highlight multiple lines in gedit. Example:
%Example is
%Commented Code
%Uncomment using this shortcut
I would then highlight/select these lines, and remove the first character to make it look like this:
Example is
Commented Code
Uncomment using this shortcut
I'm pretty sure there is an actual shortcut for this. If there is another text editor on Linux that it would work in, it would be nice to know how to do it in that editor as well.
View 2 Replies
View Related
Feb 3, 2010
I need to create a single line of output from multiple and variable lines of input in a Linux bash shell script.
My input file looks like this:
Where there may be any number of umsecondaryphonenumber lines; if there is not a umsecondaryphonenumber line for a telephonenumber, I don't want to write any output.
So, the output file should look like:
The script I have so far is:
My question is - how do print each of the elements of an array in one record - i.e. what do I put in place of howdoiprintarray?
View 2 Replies
View Related
Aug 23, 2010
I am to rename all the files within a directory (which contains multiple subdirectories) recursively without invalid characters.
I tried the coding posted above.
find . -type f -printf '%p
' | while read file; do
oldfile=$(basename "$file")
newfile=$(echo "$oldfile" | sed 's/[^A-Za-z0-9_.]/_/g')
if [ ! "$newfile" == "$oldfile" ]; then
echo mv "$file" "${file%$oldfile}$newfile"
code....
but I get an error on both of them stating "find: bad option -printf find: [-H | -L] path-list predicate-list"
View 9 Replies
View Related
Jan 15, 2010
may be an advanced question but I need to know how to do this. Here at work I am in charge of recruiting and we have about 1,000 resumes in already. All of the resumes are in a .pdf format. I need to rename every .pdf in the following format:{firstnameLastname}.pdfThe only way I know how to do this is to convert all the .pdf files to text, extract the name out of the first few lines of text, import into excel, and then use VBA to rename the files in mass:Here is my logic so far:~Deskop/a = houses all the .pdfresumesOpen terminal: Code: cd ~/Desktop/afor f in *.pdf; do pdftotext -raw $f; done That will convert all of the preceding resumes into text filesNow I would like to append the name of the text file into the last line of the text file. So, for example, for Resume1.txt, I want to append "Resume1.txt" to the last line within Resume1.txt. So after I run the command I open Resume1.txt and on the last line within I want to see "Resume1.txt" on the last line, at the end of the resume.How can I do this? I would like to use a loop and have the terminal append the filename to the body of the text file until all of the have been appended.
View 1 Replies
View Related
Jan 17, 2011
Usually when I need to replace some lines in a file, the first tool that comes to mind is sed -i:
sed -i 's|tool:.*|tool: some-tool|'
However, it's inconvenient when there are . characters in the replacement string:
sed -i 's|host:.*|host: 127.0.0.1|' Is there a better tool for this case?
View 1 Replies
View Related
Nov 5, 2010
Is there a way, besides writing a PERL program, to read each line one by one in file A and tell if this line also exists in file B? Can this be done via a shell script?
View 6 Replies
View Related
Sep 17, 2009
Is there anyway to delete certain paragraphs within a text file and then insert the paragraph into another text file.I just cannot figure out how to remove the specific lines from the file and then insert them into another file at a certain line within that new file. Thanks again
View 10 Replies
View Related
Mar 24, 2011
How to list all the files that don't contain pattern1 and append a new line (pattern1) to those files before pattern2 only once.
pattern1 = /var/script/showMessage.sh
pattern2 = ;;
Code:
grep -c 'pattern1' /var/script/*_cam* | grep :0 | add pattern1 before pattern2 in each file loacted before.
View 10 Replies
View Related
Jul 5, 2011
I want to count the lines of all files in this directory and all its subdirectories, but exclude directories "public", "modules", and "templates".
View 2 Replies
View Related
Jul 21, 2011
in the shell. how do i compare 2 text files and change matching lines in one of the files ?
example:
cat file_1.txt
line_1
[code]...
View 6 Replies
View Related
May 16, 2010
I'm trying to download a large (~18Gb) file using rsync from a server to a client, but the server, for an unknown reason, kills the connection after a time, when I've downloaded only about 8-10Gb.How can I continue the downloading of this file?
I've tried using the --partial option, but it just restarts the download from zero again. I've tried adding "--append" but I get "rsync: on remote machine: --append: unknown option" because the version is 2.6.3 on the server (and 3.0.6 on the client). I don't have control of the version on the server.
View 1 Replies
View Related
Apr 3, 2010
I'm searching within Java files for some occurrence of a phrase:
find . -name '*.java' | xargs grep -l 'string'
How do I change this command to print to the shell all of the lines which contain a match?
View 4 Replies
View Related
Mar 20, 2011
I'm running a find. -name pattern to find some files, and I'd like to elegantly get the total number of lines in these files. How can I achieve that?
View 4 Replies
View Related
