Software :: Service Bla Start Not Working On CentOS?
Aug 3, 2010
I've just compiled and installed some software (coova-chilli). I usually control this as a service so immediately after install I tried service chilli start I got the following error:
Starting chilli: which: no start-stop-daemon in (/sbin:/usr/sbin:/bin:/usr/bin)
If i run which chilli I get: /sbin/chilli I've tried 'updatedb' and a reboot but no luck. I remember a few months ago I was playing with chilli before and I this was happening. I had to run a simple command to update something or other and it fixed the issue. Of course, I can't remember what that command was.
I am in the task of migrating old linux to new linux which centos 5.5. while moving out all apps ,data etc.I need to configure SSL in apache.I have installed mod_ssl with apache 2.2. i went though some docs to configure with certificate that I have . Not sure how to start the service in 2.2. The apache/SSL was configured in my old server which apachectl. SO after importing certificatr , I do ./apachectl startssl to take in effect. In my new server , the http service is /etc/init.d/httpd, not sure how to start SSL service in centos 5.5.
Ok, so I have installed apache 22, mysql5.0 and proftpd1.3. When I reboot my server, the above applications do not start up automatically, and I have been trying to figure out how with out much success. know that I need to make some changes inside the init.d directory on my CentOS Server.I am running CentOS 5.4 x86_64 build.I really am not sure how to accomplish the task or where to start.
i meet problem on named service, i want to configure my DNS with bind...after i /etc/init.d/named statusThis shows :"rndc: connect failed: 127.0.0.1#953: connection refusednamed is stopped"
I am unable start network service on my centos box. /etc/init.d/network start device eth0 does not seem to be present, delaying initialization lspci | grep Ethernet
Doesn't show any results. It seems os doesn't identify my NIC. I am using compaq presario model pc
I have CentOS 5.2 just installed and massively updated with yum -update command. Than I tried to configure firewall. After changes via system_config_securitylevel_tui (open ssh, http, ftp, and 3306:TCP ports) iptables service can't start with message
> /sbin/service iptables start Flushing firewall rules: [OK] Setting chains to policy ACCEPT: mangle filter nat [OK] Unloading iptables modules: [OK] Applying iptables firewall rules: iptables-restore v1.3.5: Couldn't load match `TCP':/lib64/iptables/libipt_TCP.so: cannot open shared object file: No such file or directory Error occurred at line: 18 Try `iptables-restore -h' or 'iptables-restore --help' for more information. [FAILED]
I erased the iptables service and installed it again with yum. How can I make this service work?
The desktop search has stopped working in Gnome.I get a message that says 'Search Service not running' with a button that says 'Start Search Service'.When I click the button nothing happens
I have setup a CentOS 5.5 server as a DHCP server. That will be it's only task in a Cisco callmanger VoIP environment The DHCP server that comes with CentOS 5.5 is from ISC V3.0.5 -redhat.
The server (HP DL360) has two physical NIC's of which only NIC1 is used (ETH0)
ifconfig shows:
Code:
The interface has a fixed IP setup.
My dhcp.conf file looks like this:
Code:
When I start (try to) dhcpd via the service interface or via the prompt as
Code: service dhcpd start
I get an [FAILED] message and the following is in /var/log/messages
Code:
But when I start the DHCPD on the comamnd prompt in debug mode it looks as follows:
Code:
and /var/log/messages shows:
Code:
Why does the system ask a declaration for eth0 0.0.0.0?
It is the first time have I used VPN. I installed OpenVPN in my Fedora 11 computer. I did it following:URL...And I stopped at step 16: service openvpn start . The service can not start up. Even if I disabled Selinux . Does anyone know how to treat this trouble.
My Ubuntu 9.10 Server does not automatically get an ip address at start up and I have to run
Code: sudo dhclient
every time so I it connects to the network, gets an ip etc. This is fine so long as I am physically present. If I am accessing it remotely using SSH and reboot the system there's no way I can connect back again untill someone runs a sudo dhclient on the machine.
No I am trying to add dhclient to startup automatically. I was hoping to put it in /etc/rc2.d but to be able to run the script must be present in /etc/init.d. The dhclient command is located in /sbin
Creating a sym link in etc/init.d to point to /sbin/dhclient hasn't worked for me so far. I can't copy the command to /etc/init.d before running
Code: update-rc.d dhclient default?? How else do I have it run at system start?
I have been working to try and get lirc to work with my Winfast 2000/XP. I keep getting an error that the kernel module isn't loaded. This is on Ubuntu 10.04 x64. When I try to start the service, I get the following:
I install openswan on rhel6 and when i execute the command "service ipsec start "
it say: /usr/libexec/ipsec/addconn Non-fips mode set in /proc/sys/crypto/fips_enabled /usr/libexec/ipsec/addconn Non-fips mode set in /proc/sys/crypto/fips_enabled ipsec_setup: Openswan IPsec apparently already active, start aborted
I installed MySQL and I want the service to (always) start. When I google I always find the same answer; Goto System > Administration > Services. But I don have it. Administration for me goes from 'Printing' to 'Software Sources', so there's no 'Services'...
Also should I be able to start it from a shell, but I also can find that. (I have no /etc/rc.d/-directory and my /etc/init.d/-directory han no 'mysql'). I just started using Linux a few days ago (I only used MaxOsX and Windows before).
I have a service/daemon that won't start from boot. I have used the chkconfig --add <script name> command that went ok I also used the chkconfig <script name> on and that seems to be fine and I have made the script executable Chmod 777 <filename>. By all account it looks like the script is running at boot the the services has not started. When I do a ps -ef | grep ndb_mgmd this process is no there. the script can be run from the console and sems to run fine!
#!/bin/bash # chkconfig: 345 70 30 # description: MySQL Cluster management server start/stop script echo hello Paul >> /tmp/hello.txt configdir=/var/lib/mysql-cluster/
I used samba on FedoraCore2 before...and now i cannot config the same on FC10. I cannot start the service smb ( /etc/init.d/smb restart or service smb restart ) those commands dont work. How can i do to config samba service.
I have a couple of problems - and am new to Fedora which, up until about three days ago, was flawless.Am using KDE on F13. (Gnome & LXDE are also installed.)First problem is easy to solve, I think. How do I prevent "inactive" windows from fading out? It's an incredibly inconvenient feature and utterly defeats the whole purpose of the "Always on Top" option! I can't seem to find the option anywhere?On to KPackageKit. It has been trying to update KDE for the last three days but always gets hung up with the message: "Waiting for Service to Start."I notice that this problem might be listed as a Bug? - but not entirely sure.Is there a straightforward solution to this or is it, in fact, a bug?It also wants me to repeatedly restart because a new Kernel 2.6.33.5-124.fc13 has supposedly been installed.
How can I start the vncserver serivce before any uesr log in? because I only have one screen now what I already did is when I log in the vncserver service going to be startup, but I want it can start before I log in. I try the "chkconfig --level 345 vncserver on" but after I reboot, I still cannot access the system before I have a log in action.
I wonder how could I start my ruby on rails mongrel_cluster at the start of my openSUSE 11.0 Server and I don't have a GUI. So the shell solution would be good.
I know I have to count how many instances are running: ps x | grep apache2 | wc -l result if it's running: 2, or else: 1 I also know there is a command called test that I could use to perform the verification, but I don't know how to use test with wc
Just completed the upgrade to 10.04 from 8.04, and ironing out the wrinkles. Since the upgrade, I'm not able to establish a VPN connection to my institute (a problem since outgoing mail REQUIRES a VPN connection) The pull down menu shows the connection as an option, but clicking on it brings up a separate window that simply says "The VPN connection CfA failed because the VPN Service failed to start." Never had this issue under Hardy, so not sure what's going on. Under "Configure VPN" the settings look the same as they always did.
I am using Debian4 and I have apache under /home/apache/bin/apachectl How to start the apachectl service for every time system restart, Itmust be start automatically. Please tell me how todo or how to write the script, how to configure forrun level 2,3 and 5