I installed proftpd once before, but i had removed it due to some errors I removed all folder and files linked to proftp, probley not the best thing to do How ever I'm trying to reinstall it againbut it doesn't seem to be installing every thing. My webmin did have it on the server rigth hand panel but now doesn't show How do I install all files needed again
[Code]....
I've got a shared (Windows/multiuser Linux) laptop, and I've got installed World of Warcraft and some steam games in Windows. With steam games, there is (almost) no problems. I've installed steam in Linux, and soft linked the 'steamapps' directory (per-game compatibility is another issue). With WoW, the problem is different. I would like to have almost (but not) all files. Under World of Warcraft, every file and directory must be linked except the Interface directory and WTF/config.wtf file (so every user can play with their own settings and addons). How can I have a mix of linked and not linked files without linking every file? If I link manually every file/dir, when updating from Linux other users and Windows Wow is not updated; when updating from Windows, new files remains "unlinked".
View 3 Replies View Relatedi am a new guy here..i unfortunately removed all my files from /home folderrm -rf ~ /. picasa / As some of the files were important i tried recovering data using foremost..i used the command foremost -i /dev/sda1 -o /mnt/foremostThen there started a process..it was downloading something..and i left the computer for an hour or so..when i return there was nothing on screen..so i reloaded the system..And after that when i try to login i get the error"xsession: warning: unable to write to /tmp; xsession may exit with an error"..so when i googled for it i found its because there is no memmory in my /root ..so i tried login via console (tried ctrl+alt+f1..after the login screen appears..when i type ctrl+alt+f1 i get a black screen)..but nothings happening...how can i login via console..can my datas be recovered.
View 6 Replies View RelatedI just thought I should signup, been checking this forum for a while and so far it had answered most of my google searches. I'm on Karmic Ubuntu and this problem keeps annoying me since it will probably damage my hdd. It's like this: I seed a lot of torrents and I'm keeping my external plugged in; most of the time it's innactive since no one is leeching old torrents and it stays mounted in stand by, being a LP model.
Now, whenever I access a folder on my desktop to browse or whatever, Nautilus freezes because it takes time to get my external back from the stand by. The problem is that the desktop folder isn't linked in any way to the external, so why is Nautilus refreshing everything including my externals when it gets started ? I have 3 externals and this happens for them all. Did you guys ever experienced this ? I was wondering if there was a fox around this or something, I'm kinda new to linux graphic interfaces.
I've been having trouble with CUPS.I uninstalled it and I wanted to re-install it. When I removed CUPS some other files were removed too. I don't have an option of installing the software or updating a system, in the Control Center.
View 1 Replies View Relatedi encountered the following:
situation:
1 server with centos 5.4 running 1 client with centos 5.4 - gnome running thin ethernet network
on my client desktop i have a link to a shared folder on the server. this works fine.
to the problem: after working with this (using the link and seeing it working) i shutted down the server from my client (in a terminal screen, using ssh) the terminal screen signalled the server going down and the connection ended. the linked folder on the client desktop changed its icon fine.
after that i clicked on the changed icon (of the link that was not a working link any more) and the client machine froze.... no reaction any more. i could only end the session by >ctrl-alt-f#< , log in and shutdown.
Q: is it normal Centos is that angry when you click such a link?
I can't seem to find a way to do this, so maybe it's not actually possible, but I was wondering if there was a way to list all files that link to a file.
For example.
touch a
ln a b
ln a c
I want to find out what files link to a (not symlinks, mind you), assuming that this is more complicated (they are spread around to different directories).
I kind of understand about the filesystem storing links in one area and data in another, so I understand it probably takes more work to find a link from a file location than the other way around.
I'm trying to trim down Linux so that it fits on an appliance, and noticed that some related files in /bin have the exact same size:
Code:
Are those file duplicates, or are they just hard-linked, ie. there's really only one file in the flash memory but it looks like there are more than one? How can make sure?
I'm using Opensuse11.4 and have kmail and Firefox. When I click a url: link in kmail it opens a new tab in Firefox. The problem is that the url is linked to my temp cache files as this file:///var/tmp/kdecache-terry/krun/1589.0.ctt
The tab this opens has most of the link icons stripped out and the links to other parts of the website don't work and I get a "file not found" error and the link is to a file which doesn't exist file:///contribute.php3
This is only a minor annoyance as I can right click > copy the url and paste it to the address bar in Firefox then it works ok. I don't think it anything in either programme that's broken because this happened after an update to Opensuse 11.4 on my previous laptop and has happened again on my new laptop with a fresh install.
By mistake i deleted imp folder which as certain imp files created, so i want to reterive it ? is it possible by using any specific linux commands only
View 4 Replies View RelatedI am using Nautilus To re-create the problem:
Make a new user
Delete the "$HOME/Templates" folder
Create a "$HOME/Templates" folder
Now, no new templates will be recognized in the right-click menu.
problems: Files created in the Templates folder are not found in the menu of <Right-Click> -> New Document.
In Nautilus, Go -> Templates sends me to /home/$USER/.
Non-solutions:
Restarting the computer does not solve this. I have done about an hour of searching on the internet and I have searched through the Nautilus source code.. I an not good enough with Linux to be able to understand the Nautilus source.
i added users to the group om PDC after it i shared folder on linux server and given permission for users from this group, the folder is showed correct. After it i removed users from group, but the folder is accessible. Where is mistake?
[global]
workgroup = STSCOMPANY
password server = *
[code]....
This is the second time it happens : I have some files/directories that have disappeared.The first time was:
- /home/$USER/.vimrc
- /home/$USER/.thunderbird
And now, it's my folder:
/home/$USER/document
which was more important. Is there any known issue about that ? I have sometimes a file system scan when I startup my computer. Is there a relationship by any chance ?
When I run:make -f mymakefile clean I get:rm -f mybinary *.so.* *.dep *.o mybinary.symand all the above files are removed from the current directory.But I have a directory /src/ where I have all my source files located. The *.o file in this directory are not removed?
View 4 Replies View RelatedI was seeding a folder with deluge and when I removed the file from deluge I chose remove data by mistake, so can I recover my folder?
View 4 Replies View RelatedIn Linux bash shell, for a given directory, how can I list:The create date for that directory The number of files in that directory The number of subdirectories in that directory.
View 3 Replies View Relatedwhen i used windows there was this wonderful editor named Notepad++.it was perfect(it still is) some of its best and useful features of it (for me) was:
1-open all files in a folder when drag and drop the folder on it
2-search and replace a statement in all open files
3-have an extended mode which include special characters like
and so on.. i want to know if there is an editor with this feature in ubuntu?
i want make a bash panel and i want he will copy files from orginal folder to $user folder i mean when for explame i type i want install some server he say cp: cannot stat 'root/Desktop/2/files/beckup/sa-mp-steam': No such file or directory.
View 6 Replies View RelatedHow would i go about copying all .jpg or .JPG files from a folder and all its subfolders to my /usr/name/pictures folder? I'm guessing I'd have to use some sort of .[jJ][pP][gG] to get all the pictures from other examples i've seen, but really not sure how to use that in a recursive cp.
View 14 Replies View Relatedi need to copy files from a folder called output files to another folder called running but im not able to do it i always get a stat error
View 14 Replies View RelatedAfter running Bastille to harden my server, Samba stopped working. It had asked me if I would like to disable Samba during the configuration and I selected 'no' so it should not have done this.
When I tried:
Code:
sudo /etc/init.d/samba restart
Nothing happened. I found in the script, if it does not detect smbd and nmbd running, it just exits -- no error message, just simply does nothing.
I found that /usr/sbin/smbd and /usr/sbin/nmbd both had all permissions removed. I set them back to 755 and restarted samba normally.
I got a folder that I transfer stuff to all the time. the folder is in chmod 775 but when i upload folders and files, they are given chmod 700, but i want it chmod 775 everytime i upload something. so far i have logged in to my linux computer and did a chmod -R 775 to the folder every time i uploaded something to it. is there a function somewhere to make it 775 everytime i upload or can i have something run a script, so i don't have to go in and write it everytime i upload something?
View 2 Replies View Relatedhow do you configure proftp to log MAC address on LAN, not just IP?
View 4 Replies View RelatedI am used to Ubuntus simple sharing with samba. Just install it, reboot and then share the files.Then do I klick on network folder and see all the shared files on the computers in the network.
How do I install it so I only need to go into network folder and see the other computers shared files.Then, how do I share files?
I hope it's not so difficult and that I have to change i config-files.
I am new to Fedora.
I have tried, to set this up, but failed what kind of ftp would you guys recomend, as i have been having slight problems over recent days, with unknowns logging onto my annon ftp server, delt with mind.
I am thinking about a proper login even for the annon account, fairly easy to setup.
I am running CentOS release 5.5 (Final) with PROFTP installed.
I am able to connect to the ftp server from local, but when I try it from dream weaver CS5 it can't connect to the server. I ran a port scan and 21 seems to be open:
PORT STATE SERVICE
21/tcp open ftp
22/tcp open ssh
53/tcp open domain
[Code]....
I'm running a ProFTP 1.3.3 server on a CentOS 5.5.What has come to my mind in terms of security is to have the server disabling / deactivating account that enters the wrong password, lets say three times.Using MaxLoginAttempts only limits the possible retries on a open connection.
View 2 Replies View RelatedI setup proftp and apache on debian linux. I can go to [URL] and see the it works page but do not know where to beginn with proftp. how do I check to see if the ftp works.
View 8 Replies View RelatedI am using Debian 4 with proftp 1.3.1 The log file shows lots of successful logins from localhost. I never accessed ftp from localhost. Is this normal to happen?
Code:
Feb 14 11:27:22 mymachine proftpd[2453] mymachine.mydomain.com (localhost.localdomain[127.0.0.1]): USER ftpuser: Login successful.
Feb 14 14:27:22 mymachine proftpd[2453] mymachine.mydomain.com (localhost.localdomain[127.0.0.1]): Preparing to chroot to directory '/home/comunicacao/portal'
[code]....
I wanted to use symlinks, in my annon ftp dir. I was running vsftp, but everyone says it can't be done. So I have changed to proftpd. I link to the annon ftp server on my website. I get the dir listing, with symlinks, but try to follow them I get error 550, it don't exist. I have read [URL], but after following the advice here. I get the same error. I have not tried the mount bind option, as I want symlinks or hard links either will do.
View 3 Replies View Related
