Software :: Installing RPM For Canon Pixma Ip4850 In PCLINUXOS
Mar 9, 2011
My distribution of choice is pclinuxos, the repos do not have a driver for my pixma ip4800.I have downloaded the two drivers for this printer from the canon site but so far have been unable to install them or find a specific thread that can help.
I was using 10.04 until a few days ago, and with 10.04 my printer worked fine, I used the default drivers for MP150 and that worked fine. But now I'm using 11.04 and I'm trying to instal the printer with the default drivers for MP150 but it's not working. When Ubuntu tries to find the driver is not giving me any result for MP140, so I'm selecting the option "CANON PIXMA MP150 - CUPS+Gutenprint v5.2.6 Simplified [en] (Recomended)" and allows me to click next and to give a name to the printer and to hit next, but then the windows closes and that's it then I go to System > Admin > Printer and I double click the printer I just created and I click Print Test Page and then it gives me "Printer Status: Processing - Printing Page 1.8%" and after 4minutes or so gives me "Installation or actualization of package "python-xmpp 0.4.1-cvx20080505.2" failed" and that's it Is there a way to fix this? I have no idea why this is not working since it worked fine in 10.04, and I really need to use the printer and the scanner as soon as possible
I have just installed SUSE 11.2, but although my ip3000 shows in the hardware, I cannot get a correct print out on A4 paper and I am informed that no driver is available. There must be a work-around for this?
I have a canon pixma mp640. Under opensuse 11.2 64 bit the printer worked (printing and scanning via wifi). I recently reinstalled my system with 11.3 64 bit, and after installing the canon rpms and creating the printer I get the following error in /var/log/cups/error_log:
Backend returned status 1 (failed) printer-state-message="Illegal backend: Success"
In opensuse 11.2 I needed to create some links:
cd /usr/lib64/cups/filter ln -s ../../../lib/cups/filter/pstocanonij cd /usr/lib64/cups/backend
I'm trying to get a Canon ip4850 printer installed on a fairly new upgrade to 64-bit Narhwal. I want to install the cnijfilter-common_3.40-1_amd64.deb and cnijfilter-ip4800series_3.40-1_amd64.deb packages, (;atest Canon drivers) but get the following error:
dpkg: error processing /home/name/cnijfilter-ip4800series-3.40-1-deb/packages/cnijfilter-common_3.40-1_amd64.deb (--install): cnijfilter-common: 3.40-1 (Multi-Arch: no) is not co-installable with cnijfilter-common:i386 3.20-1 (Multi-Arch: no) which is currently installed
How do I remove the old i386 3.20-1 arch? I've tried sudo apt-get remove, and this is the result.
name@name:~$ sudo apt-get remove cnijfilter-common [sudo] password for name: Reading package lists... Done Building dependency tree [code].....
Does anyone have an idea of where i can find a driver for this printer? The system does not have one and if I try a driver for say the PIXMA MP220 which is CUPS + Gutenprint v5.2.4 [en] (actually, all the PIXMA drivers are that one) and I print the printer seems like it receives some command but nothing else happens. The printer says 'Printing from PC' and then goes back to the main screen.
I use an Intel P8700, 2 core 64 bit m/c.I have tried downloading the Canon binary files, but these fail after starting when the software detects a 64 bit mc.Now trying with the Canon source files.extracted the print filter loaded the "autogen.sh" which ran and invited me to type "make". Yes! I thought!I have been trying to print for about 5 months now, and am getting weary!George "autogen.sh"ran ./configure, apparently successfully, invited me to type "make" which I did. This failed!I have a copy of the interaction but cannot see any way to add it to this post.
Running Ubuntu 10.10, when trying to print to canon 1800 print file is created, spooled to printer but does not print. Job appears in print Q and ends as finished job, next job number increases correctly. Printer light flashes to indicate data in,, but nothing out on paper !! (printer works fine on "the Other" OS!
I just bought a new printer yesterday. It is a Canon Pixma iP2600 series. I connected everything properly and my computer found the drivers and told me the printer was ready for use. However, when I tried to print out a test page the computer said it was printing, the printer was flashing as it should, but nothing was printing out. Is there some switch I need to turn on or off? Is there something that I need to type in or delete somewhere? The old printer was a HP deskjet and it did work even if it was a little slow being that it is over 8 years old.
I recently purchased the canon pixma mg5220 and am currently figuring out how to print to it from my computer.
First of all, I dont know how to connect to it (its a wireless printer btw and is currently connected to my wireless router). I went to the "add new printer" part of the printer utility and selected "Find Network Printer." I dont know what to type in for "host" however. Right now i have a temporary fix of sharing the printer on my laptop (which runs windows) and printing through that.
Second of all, drivers. I found http://ubuntuforums.org/showthread.php?t=1588333 and downloaded the drivers (to my downloads folder) from the link provided, but I can't figure out how to install it. The post says to run the install.sh but it seems to be just a text file, and when i right click it, "properties" is not an option, so i cant mark it as executable. How would can i run this file to install the drivers?
I have finaly gotten the Canon Pixma MP495 working under Ubuntu 10.10, with full resolution capabilities of the printer.This printer is only advirtised as having a max resolution of 4800x1200 DPI. However, I called Canon to get the full range of print resolutions and was informed that this printer is capable of 9600x2400 DPI.I haven't tested this below Ubuntu 10.04 but it should work fine.
For setting your MP495 printer up on your network without the use of a Windows or Mac machine (Fresh out of the box with Ubuntu) you will need to match your Routers SSID to the printers default SSID, and remove any security you have enabled. This will allow the printer to connect to your network.
SSID: BJNPSETUP IP ADDRESS: Automatic
Once you have done that you will need to activate the wireless lan on the printer.Press the Maintenance button on the printer 13 times until you see what looks like a capital G without the middle line. Then press the color start button. (refer to page 10 of your Network Setup Troubleshooting manual for an actual picture of the symbol) You should see the wifi light on the front of the printer turn on and be solid not be blinking. (If it is blinking check your routers SSID settings and match the Default SSID of the printer as listed above.
Now download angryipscanner AngryIPScanner and install it by double clicking it. It should open in the Software center or with the Gdebi installer. (this may take a few minutes to install.)Once you have installed AngryIPScanner, run it and change the ip range to include from 1 - 254 in the last octet. Then click start. When it finishes look for an active connection with a Hostname like A001BF000000.local. Yours may be different but should be very simular.
The IP address given for that hostname is the IP address of your printer. Open Firefox and type that address in the address bar and press enter. From there you can configure you printer for the SSID, and encryption that you had on your router before the change, and set a static IP for the printer so you can manage it easily.After you change the SSID and encryption on the printer you will have to go back to your router and change the SSID and encryption back to what it was before so your printer can connect again.Now your network should be back the way it was and your printer should be connected Now that you have successfully connected the printer to your wireless network continue with the rest of the installation. Download the drivers for the MP495 . You will be downloading cnijfilter-mp495series-3.40-1-deb.tar.gz.
Extract cnijfilter-mp495series-3.40-1-deb.tar.gz to your Home directory.Change the permissions of the install.sh file to run and an executable by Right licking on install.sh and then left clicking Properties. Click on the Permissions tab and put a check mark in the Allow Executing file as program box. Then open a terminal and type: [CODE]sudo ./install.sh[CODE] Follow the prompts and if you are using the printer over the network select network when prompted. I you are using it via USB choose USB. Don't forget to scroll down to complete setting up your printer to use full resolution and set up the scanner.If the first method didnt work try this.Open a terminal and enter
cd /home/*/cnijfilter-mp495series-3.40-1-deb/packages. (Enter your username where the astride is.) Quote: For 64 bit systems you need to replace cnijfilter-common_3.40-1_i386.deb, and cnijfilter-mp495series_3.40-1_i386.deb with cnijfilter-common_3.40-1_amd64.deb, and cnijfilter-mp495series_3.40-1_amd64.deb. For the printer setup. For the scanner replace scangearmp-
I have recently purchased a canon pixma mx330 all in one printer. I tried using yast on 64 bit opensuse 11.1, kernel version 188.8.131.52-9 to locate the necessary driver to no avail. Is this a futile attempt or is there a driver that yast can't find.
I'm trying to get my Canon Pixma MP510 scanner to work under openSUSE 11.3. Canon Linux Support doesn't seem to have anything for 11.3, but sane claims to provide basic functionality. The printer is working fine, but I don't manage to configure the scanner.
I tried to configure via YaST, but the following happens: The scanner is found, but (correctly) labbelled as "not configured". Clicking "Edit", the PIXMA MP510 is listed and a driver suggested: "Canon PIXMA MP510: (Package sane-backends) Driver pixma should provide basic functionality (USB-ID 0x04a9:0x1717)" If I select this option an click on "Next", the window crashes and I get the following error in the KDialog window, but I have no clue what it means: "YaST got signal 11 at YCP file Wizard.ycp:849 /sbin/yast2: line 399: 5663 Segmentation fault $ybindir/y2base $module "$@" "$SELECTED_GUI" $Y2_GEOMETRY $Y2UI_ARGS"
Is this a YaST problem? Or driver related? I thought about configuring the scanner without YaST, but don't know how to do it. I tried to google a HowTo, but couldn't find anything useful.
The command "sane-find-scanner" successfully detects the scanner, "found USB scanner (vendor=0x04a9 [Canon], product=0x1717 [MP510]) at libusb:001:004", but the command "scanimage -L" yields "No scanners were identified."
how to make YaST configure my scanner? Or how to configure it without YaST?
I'm trying to get my Canon Pixma MG 5150 scanner/printer to work. While the 'printer' is doing well the 'scanner' appears to be stubborn. I use the scangearpm-MG5100series-1.60-1 driver provided by Canon which is said to be fine with Suse 11.2.
The trouble is, that though the scanner scans it does not deliver anything back. Here are the details:
When I run scangearmp as root in a terminal I get the following output:
Code: (scangearmp:6902): GVFS-RemoteVolumeMonitor-WARNING **: cannot connect to the session bus: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
Trying to make a Canon Pixma 3-in-1 MP250 to work with my Slackware. I've took the drivers from the canon website (they have .deb, .rpm and sources there) and compile. Basically I followed the instructions from INSTALL files in each subdirectory (backend,cngpij, etc).
Then I upgraded also CUPS to 1.4.3.
Installing the printer in CUPS, I end up with:
Code: Description:Canon MP250 series Location: Driver:Canon MP250 series Ver.3.20 (color) Connection:cnijusb:/dev/usb/lp0 Defaults:job-sheets=none, none media=iso_a4_210x297mm
It seems ok. But when I send a test page (or any other kind) to printer, it shows some activity on the led display, cups reports the job as completed but nothing happens!
As an extra, I tried to convert .deb packages to .tgz and install from them. The same result, except now the scangear utility is working (so scanning is ok).
How can I find what's missing from here? Maybe it's a bug with cups/drivers or something is missing from configuration?
p.s. On other machine I have an Xubuntu (Karmic Koala). Installed there from .deb packages and the printer works as expected.
I have installed Fedora 13 on AMD x86_64 plattform. I want to add the Canon PIXMA iP1900 printer, but cups doesnot have in the repo. (127.0.0.1:6xx). Then i visited canon-europe webpage, and i downloaded the rpm version of the printer driver. But it no works! and the printer isnot added to the repolist of cups.Who can i solve this problem in Fedora 13 ?
When I try to set up my printer a Canon Pixma MP530, there is no driver! Only the Generic ones and they don't work. On Ubuntu using the Pixma MP500 driver works just fine, but there is no option for that on suse. Only for HP and Generic. The only solution I have found was turbo print, and that costs $30. I am hoping to find a solution, I really like SUSE, but I may have to go back to Ubuntu.
I have downloaded all drivers from canon website for linux or Ubuntu . My computer find this printer which suppose to be the right one but nothing happen ? usb://Canon/iP2600%20series. do I need more drivers or files to work in Ubuntu ?
I recently got the printer part working by downloading from canon the correct rpm also in doing this I got the scanner driver. My computer tells me it is installed but I see no program to connect with my scanner. There is nothing in xsane or simple scan to allow me access to the scanner.
Using Squeeze and a Canon Pixma IP4600 Printer. The color on the printed pages used to be true and now it isn't, it still print is color just not the correct colors.I am color deficient or color challenged (what used to be called color blind) which dosen't mean I can't tell the difference between what is on the screen and what is printed It's not the printer as I have tested it with other Linux and a windows system and it's good.
I have a Canon PIXMA MG5250 stand alone wifi printer thats connected to all my windows computers and laptops. Now I want to install a computer with Ubuntu 10.10 and connect this printer also wireless by wifi.
I have replaced Ubuntu 8.04 with a clean install of 9.10 In 8.04 I used to be able to print to my Canon Pixma ip1500 using the resources at [URL] In 9.10 I can no longer get my Canon Pixma ip1500 printer to work because on the one hand: Open pstocanonbj_3.3-1.1_i386.deb with GDebi Package Installer
Error: Dependency is not satisfiable: libcupsys2-gnutls10 (>= 1.1.23-1) and on the other hand:
In http://packages.debian.org/etch/libcupsys2 download libcupsys2-gnutls10 "Download Page for libcupsys2_1.2.7-4+etch9_i386.deb on Intel x86 machines" Open with GDebi
A neighbor of mine just got a Canon Pixma MP450 printer, to replace an old HP printer, and I am trying to get it to work with Fedora 11 installation from a machine they have borrowed from me. The printer gets recognized upon plugging it in but when I try to print a test page from the printer properties I receive the following error:'client-error-document-format-not-supported'
The driver that is selected for the printer is "Generic Driver" I have tried to select a driver but have not found any Canon drivers from the selection dialog box. After searching the web I see mention of a Canon MP150 driver working for the MP450 but I have not found this driver. Is there a driver I have to install from YUM or download from Canon? Are there others successfully using this printer and if so what have they done to get it to work?
I had successfully installed and used canon lbp 1210 while using 8.04 LTS as per ubuntuforums. However, unable to install the printer thereafter. Now using 10.04. Anyone has tried installing canon lbp 1210 on ubuntu 10.04?
i am running T43 Thinkpad box with Ubuntu 11.04. we have a canon network printer model i-SENSYS MF4570dn printer, and i am trying to install the UFR II driver which i downloaded from canon website. the problem i am facing is that when i install the driver with gdebi i receive error message saying: Dependency is not satisfiable: gs-esp.i tried to install ge-eps but it is not part of the repository for 11.04
I've been running Xubuntu 9.04 for the past couple of months but have difficulty installing my Canon MX-860 wireless printer. Everything else works perfectly and connects wirelessly to internet. Since I run a couple of other Win based computers, printing from the Toshiba 1100 laptop hasn't been a problem. It would be an advantage. I tried to install the latest Xubuntu distro on the Toshiba and it installed but could not connect to the wireless Atheros card. Where should I start? get Distro 10.04 working first or try and install the printer with the existing distro?