Having issues installing Clustering Software on server: rhel-x86_64-as-4-cluster I am running the following kernel:
The server is up to date with updates, but I am having trouble installing the Clustering software and don�t know what to do now�
# uname -r
2.6.9-89.0.25.ELsmp
#
[code]....
How can I get this installed ?
We have zabbix Network monitoring tool installed on two servers 172.17.11.6 ( Master ) and 172.17.11.3 ( Slave ) RHEL 5.4 Servers with 172.17.11.4 being Virtual Ipaddress.We are trying to implement High Availability with Red Hat Cluster Suite.OS level Clustering has been implemented with following cluster configuraiton.
But we need to implement Application level clustering for Zabbix_server process which inturn depends on httpd and mysqld deamons to be running.So I have to check the health of mysqld and httpd with a shell script along with the health of zabbix_server process.Any good tutorials for this ? Any guidlines that I have to follow ?Here I may need to take care of following things when any one of the process goes down
1. Shifhting Virtual IP
2. Shifting /dev/sdb1 ( Shared drive to slave )
3. stopping other services on master
4. starting all the services on slave
I have some chassis with this motherboard [URL] that don't have PXE boot. What is the best way to cluster them?
View 3 Replies View RelatedMy current project environment setup is having a single server, running on RHEL 5.2, that is constantly receiving incoming data (video and text) over a periodic interval e.g. every 30 minutes. Initial in-house testing projected the server will be generally busy, so we decided to incorporate a second server for load balancing purposes. So now, server A and B will need to be clustered. Once that is done, incoming data will balance out between the two server (or at least that is what I will like to achieve. Note, I'm aware that at the switch side, I'll need to do some additional configuration and that part is covered).
I've been reading on Red Hat Cluster Suite and the Linux Virtual Server (LVS) seems the way to go. However, I noted that the LVS solution require at least a two-tier solution, and that would incur 3 additional servers instead of just 1. So here's my questions:- I looked around and probably know the answer, but I'm gonna ask anyway. Is there a one-tier solution for LVS i.e. have anyone tried or whether it's even feasible. From my reading, it don't seem so but just want another opinion. Is there any other way for me to do the clustering (for load-balancing) without LVS?
Sidenote: I'm currently looking at Ultra Monkey and will be trying out in a while. However, the project I'm doing would be rolled out to live site eventually, and my customer is kind of....particular. I'm just wondering if there's a software/application (that need to be purchased) and comes with support.
I am trying to figure out ho to setup EC2 clustering. I am seeing heartbeat as an option. I need something that will monitor the state of a daemon, and not if a daemon is running. For example, say I want httpd to be high availability. Does heartbeat monitor if httpd is not in a hung state, or does it simply do a ps -e |grep httpd? So my question is, how does heartbeat work?
View 2 Replies View RelatedShare good links to know more about OS clustering in Linux.
View 7 Replies View RelatedI added the "@clustering" and "@kvm" keywords to my ks.cfg file but during installation, an error about not being able to find either of these packages popped up and it wasn't installed.
I do see the Cluster and VT directories in my redhat_es5.4 directory along with the Server directory. The rest of the files install just fine.
In doing some net and forum searching, I find a reference to a base.repo file that lists the directories but I'm not sure if it's related to creating a yum repository or if not, should it have been created in the redhat_es5.4 directory.
While I've built kickstarts for several years and am comfortable with the file, this is the first time I'm working with rpms outside the main Server path.
To clustering my web server so that it becomes Highly available. Its currently running php, apache and mysql with no redundancy in place. I want to be clustered so that if one node goes down then the second one will automatically take over. I have done that with HA in RHEL but I want to use centos clustering solution for this. Also how willl they share the web contents and mysql database among two nodes I have no idea. I have managed a iscsi target to store contents but it doesn't work as expected.
View 1 Replies View RelatedI'm looking to set up a clustered mail server, I kind-of know how I'm going to do it but wanted to check if there was a better way. So we have 3 mail servers, running as EC2 instances on Amazon AWS. We were going to achieve clustering by giving all three a shared EBS storage device to store the mail. The mail would be received by any of the three servers (Via postfix) and could be retrieved from any of the three servers (via dovecot). For receiving mail (SMTP), the domains would have 3 MX records pointing to each of the servers but for sending and retrieving mail (SMTP and POP3/IMAP) the three servers would have one DNS A record with 3 IPs associated (I know when using this method for web-servers, the load gets distributed among the IPs under that record but I'm not sure if this will work for SMTP/POP3/IMAP).
What we want is to have 3 servers that share the load equaly but are completely redundant for all services (POP3, IMAP and SMTP). We also need to be able to scale upwards so if we need to add more servers we can do easily. Also the servers must be perfectly synchronized at all times.
I am looking for an open source active clustering product can you please advise me about the best clustering softwares on Linux?
View 1 Replies View RelatedEmpty: Index of /repositories/server:/ha-clustering:
View 4 Replies View RelatedI'm trying to get an HTPC going, but I don't have any money to purchase a new computer. I have 2 desktops in my possession that I am trying to use: 1 is a 2.4 GHz with a 128 MB Radeon 9800 PRO video card (I think) and 1.5 GB RAM (the system is about 8 years old, but I built it top of the line for back then). The second system is a 3.2 GHz dual core with on board video and 2 GB RAM.The problem is, neither system will run 1080p video's without dropping hundreds of packets producing very choppy audio/video. I was wondering if it is possible to cluster these two systems together to harness both their processing power to run 1080p video? I would just jump in and attempt it, but as I have been reading, it looks like processes aren't actually shared across PC's, but auto determined which PC it will run on based on load, which is an issue since neither can cleanly run the 1080p video.
View 6 Replies View RelatedHow can I get the NS Code for passive clustering in NS 2.34
View 3 Replies View RelatedI want to connect two systems in clustering concept. am new for clustering configuration. I have installed ubuntu 9.10 server edition in two system. what do to the next step to configure clustering in ubuntu 9.10 server edition.
View 1 Replies View RelatedI am looking to build up a HA/LB linux cluster with specific software requirements. For hardware, I have a number of dual xeon PE 2650s and would like to use them as efficiently as possible. These are 32bit systems, I anticipate scaling up to 64bit systems when I have a tested, working solution in place. For distro, I am familiar with CentOs, Gentoo and Ubuntu but unsure as to which would be the best foundation, although leaning towards CentOs. For software, I need to realise all the services provided by xampp (Apache, MySql, PHP, Perl, FTP), plus Red5 flash media server.
My current train of thought is;
6 physical servers; 2 Directors/Heartbeat, 2 Apache, 2 Red5
Gigabit private network for connecting the nodes.
CentOs 5.5 on all nodes.
DRDB across the 2 Apache nodes for Apache, MySql, PHP.
DRDB across the 2 Red5 nodes for Red5.
I am Working On Citrix Xen Server.I have Installed two Virtual Machines(Centos 5.3).Now Apache is Configured and its running on the First VM.Can I Set up a Apache Clustering On those VM?.My Aim is "If Apache On the First VM Down,then Apache on Second VM Should Automatically Start".Is there Any Tutorial to Setup Apache Clustering On Virtual machines.
View 4 Replies View Relatedi have purchased sun server for my visualization project. Request you to help me finding the io for disk .I have put storage(disks) on different location (File Server) and on server (Application) i have configured 4 virtual machines.
How would i monitor the io for file server from the Application server where i have configured 4 virtual machine. one way to mount the file server share on application server and execute
dd if=/dev/zero of=/share/test.out bs=1024 count=1024 to check the read and write Is there any other way of doing this.
I have a web application(java 5, mysql server) installed on Tomcat on Red Hat 5.Part of the functionality is to allow the upload of files to a windows share. I have mounted the share using theAny file I create here from the terminal gets sions."-rwxrwxrwx"The problem is that when the application server creates the file it gets created with the following."-rw-r--r--"How can I get files created from the server to be "-rwxrwxrwx"
View 1 Replies View RelatedCan anyone tell me in performance tunning of apache-tomcat and jboss application server?when I deploy some application in apache-tomcat the performance is say 100 users per second and incase of jboss it is even worst (35-40 users per second)i want to improve my performance 1000 uesrs per second..
View 1 Replies View RelatedI am trying to make an application server that would contain simple ones like edit, openoffice, gimp, so on and so forth. I know how to access these using ssh but what I want is that the application runs on that server as it already does, but to open local files and save them locally.
View 7 Replies View RelatedWe are trying to define an appliance for an application server so I would like to know which should be the best file system type for this kind of use, basically our web applications uses libraries of 50 KB and our web apps.creates temp and logs files not bigger than 3 MB.
View 1 Replies View RelatedWe recently shifted our applcation and database to LINUX from UNIX.so now application server(weblogic 8.1) is on linux and oracle database 9i is on linux.previously there is a process in application server(which access the Database dor the data) which took only 1 hour to run on UNIX after shifting to LINUX the same process is taking 4 to 5 hours to run.
but when individually ran the queries on the database it is quck than UNIX.our ADMIN tried changing the kernel parameters for the database server, but it is still the same.
on Suse linux 11.2 while trying to install sun webserver 7 I was unable to install it in graphical mode, is the any package that needs to be installed in order to do that
View 6 Replies View RelatedI upgraded to version 11.4 and now I can not install any application. Not YAST or zypper downloaded RPMs.Firefox and Konqueror can not download links that are rpm. I do not understand what happens. Ties other than rpm, if fully discharged. I tried as root and nothing.
View 9 Replies View RelatedI am currently running Ubuntu version 10 as a desktop workstation. I would like to run a Linux O/S as a server, either as a application server or an web server. Can I do this effectively with Unbuntu?
View 1 Replies View RelatedWe are trying to define an appliance based on Suse for an application server and Web server Apache, so we would like to know configuration best practices for network and security, is there any paper/doc about best practices?
View 3 Replies View Relatedi am installing rt3(request tracker) in linux.after installa rt3 i can not run other application in that server.when i try to run oter application rt3 page was open.iwas try to web path in /opt/rt3/etc/RT_Siteconfig.pm.But there is no change.how to solve that?
View 3 Replies View RelatedIm creating a PHP application for my company. The application its going to be used by around 500 people in the network. I've always used Windows Server for my PHP applications, but I want to start using linux. I've heard its faster and more secure.
I want to knwo, what type of computer should I use? Is does linux work better on Intel Xeon or AMD? I need the application to work fast.
Am I going to have any problems with incompatibility if I get a Dell server?
I've used Ubuntu, just to check it out, but I've heard Centos is better for web servers, is that true?
Is it possible to hide cpu cores from an application?
I am running RHEL 5.5 on a Sun 4450 with 24 cores. We use Sybase database. Licensing for Sybase is by core. I would like to restrict Sybase to using 8 of the 24 cores and allow other apps on the system to use the rest of the cores. I want to reserve 8 cores for Sybase use only and Sybase only has access to those 8 cores.
now I have managed my rsyslogd to log the firewall into a separate file I would like to use a script which looks into this file for intruders which for example try to ping, telnet, ssh, rdp etc into my dsl connection.And then use a kind of app or firewall on my ubuntu server to block them.Yes my firewall logs them but does not block them if the policy is enabled, so they have access on through the firewall and the connect to my server but I only want some known IP addresses have access through it and this I cannot program in the firewall so I have to use some extras.Or am I thinking way to far and is there a better solution with IPtables or app?Is it possible to watch tcp connections between the firewall from outside IP addresses and the ubuntu server?
View 7 Replies View Related
