I am trying to compile the source code for Mudlet, a MUD client, on Fedora 13 64bit and I keep running into linking errors at the end of the compilation. Here is the latest:
[Code]...
This makes me think that the yajl library was not found. I have both the yajl and yajl-devel packages installed:
[Code]...
Should I be using a different library specifier other than -lyajl, perhaps?
By default, Fedora x86_64 only installs 64 bit libraries under /lib64 when OS installation! I think, it is not very good because there are so many 32 bit application software, without 32bit library, 32bit application can not run at all! Why Fedora not install both libraries by default, any concern?
View 2 Replies View Relatedm using fedora 13 gnome while installing glib m getting error
configure: error: *** Working zlib library and headers not found ***
I downloaded 64-bit version of Fedora 11 and burned the iso on my dvd. When I rebooted the machine it booted up from the dvd but it showed an error message that kernel "image not found". And it stops there itself. Can someone show me some way except downloading the iso again?
View 1 Replies View RelatedOn F11 I very often used gftp. Now, after upgrading from F11 to F12 gftp gives the message that it needs libcrypto.so.8. When I try to install it by using yum, there's no such package available. Also, I find that I'm not the only one having this problem. Anyone an idea on how to solve this?
View 7 Replies View RelatedI installed Fedora 10 x86_64 from DVD this weekend. Once the install was completed and I booted into the new install, I ran the Software Update expecting to find and download security updates. However, to my surprise no updates were found! The install DVD was downloaded and burnt to DVD about two weeks ago. Did the installer fetch and install the F10 updates? Or did I mess up my install and/or configuration of F10? I remember when I installed F9 there were a lot of updates found right after the install.
View 14 Replies View RelatedIn trying to use the instructions here [URL] I get Quote: -bash: wget: command not found
View 2 Replies View RelatedOn Opensuse 11.4 64bit, on a Dell E6410 notebook. Installed the 32bit dependencies from SDB: Skype (SDB:Skype - openSUSE ) i.e. su -c 'zypper install libasound2-32bit xorg-x11-libXv-32bit xorg-x11-libs-32bit libqt4-x11-32bit libpng12-0-32bit' Then installed the latest version (2.2.0.25 from Skype website for openSuse 11+
And when launching skype in a terminal window I get "Fatal: Cannot mix incompatible Qt library (version 0x40702) with this library (version 0x40701) Aborted" And this corresponds tot requireing an older QT library for Skype than is the current version from openSuse 11.4 How do I fix this?? I've already pursued all other solutions I could find.
I try to install simulation package Espresso. When I configure I have following error message.
checking for libtcl8.5... no
checking for libtcl8.4... no
checking for libtcl8.3... no
[code]....
iwant to install julius 3.5.2 on my system but i have an error after compiling the file configure the error is flex library is not found so what i have to do
View 3 Replies View RelatedI tried to compile one software. After I typed "./configure", there is an error:error: GSL CBLAS library not foundI installed GSL 1.9 library --- When I was installing, it was like this:
make install
Making install in gsl
make[1]: Entering directory `myDir/gsl-1.9/gsl'
[code]....
How to fix this error :
Code:
checking for Qt4... no
configure: error: The QtCore library >= 4.3.0 could not be found.
Configuring postfix for getting gmail account and we make ssl certificate for this.
File not found ssl
while giving this command:
whereis ssl
ssl:
ssl library file not found ....
configure: error: readline library not found If you have readline already installed, see config.log for details on the failure. It is possible the compiler isn't looking in the proper directory. Use --without-readline to disable readline support. Now I tried to yum install readline-devel and the result was failure as below:
Quote:
[root@localhost ~]# yum install readline-devel-6.0-3.fc12.i686.rpm
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
[code]....
So I am thinking that maybe I have to tell configure where my readline libraries are. From the above, it looks like readline-6.0 is not on my computer, even though I went through the configure/build/install process for it.
In the process of installing DDD, I get the following error:The X11 library could not be found. Please use the configure options '--x-includes=DIR' and '--x-libraries=DIR' to specificy the X location.I did a "yum install libx11-devel". I was told that the right package was installed
View 1 Replies View Relatedi was wondering if there is away to avoid application from closing if a specific library not found? for example: if my application uses libPng and it wasn't found on the system running my app (binary and not source), is there anyway to just disable the part that uses png from my application?
View 14 Replies View RelatedI am trying to install skype on a 64bit Fc14 and the 32bit doesn't work.
View 8 Replies View RelatedJust purchased a new Mac book (white) Uni-body Model ID 7.1
Intel 2.4 GHz Core Duo
Mac OS X 10.6.4
4Gb Ram (upgraded)
Hitachi 500Gb 7200 RPM (Upgraded)
Installed r-EFIt and then ran disk utility created 3 partitions one for Windows 7 Ultimate 64bit and two for Ubuntu 10.04 the windows install went smooth was able to boot into either OS without any problems then tried installing Ubuntu and then would get errors using the Live CD that I created I burned two additional disks at slower speeds then tried one of them in a another PC and it would work even ran it in live CD mode now have my taste buds wet want to use it on my Mac Book.
When I tried to install on the Mac Book it would fail with error no device found to install it would not even get to select the language with internal DVD drive so I hooked up a usb drive and would get up to step 4 to where you select the partition to install Ubuntu on this is where it gets to the problem it was blank no internal drive was able to get to Gparted in Live mode and same thing the hard drive would not show up.
I booted back into MAC OS X and ran disk utility it shows the partitions. A additional I tried the option to turn off ACPI before running installer still could not find the hard drive also downloaded a live gparted and same result could not see the HDD.
Downloaded from here: [URL] then ,it is 32-bit and I need to know what all 32-bit libs are needed as dependency for skype to work. I am on Gnome Fedora and purposefully selected static version of skype to prevent installation of libqt4.
View 2 Replies View RelatedI have the simple fortran codes as:
Code:
integer :: i1=2455121, i2=2455121
real :: s1=0.19123840, s2=0.20749992
real*8 :: a1, a2
a1=i1+s1; a2=i2+s2
[Code]....
When s1 and s2 are stated with 'real*8', the 64bit and 32bit systems get the same results.
I just bought sony vaio laptop(EB16) couple of days before.I had window 7 OS. Two days before i downloaded Fedora-12-x86_64-DVD & installed in my PC.Everything is working fine except when i play any video or audio file such as .avi, .mp3 from any player such as vlc player, movie player ,xine etc , i don't get any sound.I tried to search this problem in internet but still i am not able to resolve this problem.
[Code]...
Im trying to set up my 3G modem to recive and send sms but I had no luck so far
Code:
Bus 002 Device 010: ID 19d2:0031 ONDA Communication S.p.A. ZTE MF636Im I tried with gnokii and wammu and many other things and did not want anything to do
I need to install libssh2 on my CentOS 32bit server to get ssh2 extension of PHP working, after installation of this rpm, I still can't run "pecl install ssh2-beta" because it give me this error: configure: error: The required libssh2 library was not found. You can obtain that package from [URL] ERROR: `/tmp/tmp2ImZz1/ssh2-0.11.0/configure --with-ssh2=/usr' failed
View 1 Replies View RelatedI get an error loading libraries, even though PATH and LD_LIBRARY_PATH seem to be correct. Here are the details:
[Code]....
how vlc source code can be compiled?
View 2 Replies View RelatedI have downloaded "db-4.8.26" and trying to compile it for MIPS. I am using the following configuration options
dist/configure --host=mips CC=/opt/montavista/pro/devkit/mips/fp_be/bin/mips_fp_be-gcc LD=/opt/montavista/pro/devkit/mips/fp_be/bin/mips_fp_be-ld CFLAGS="-g -O2 -lpthread -D_REENTRANT" LDFLAGS=-Bshareable
but compilation is giving lot of errors for mutex.
./libtool --mode=compile /opt/montavista/pro/devkit/mips/fp_be/bin/mips_fp_be-gcc -c -I. -I../dist/.. -g -O2 -lpthread -D_REENTRANT ../dist/../mutex/mut_pthread.c
[Code]...
anybody found or wrote driver for Konica 7130 best 64bit
View 2 Replies View RelatedI am trying to build gdb on Fedora 14. I get an error: "no termcap library found" I have not been able to find a good answer by Googling. There is some recommendation to make sure libncurses is installed, which I think it is.
locate *libncurses.so" returns:
/lib/libncurses.so.5
/lib/libncurese.so.5.7
Can anyone get the website below to work correctly with Firefox 3.5 and F11 64bit?[URL]...All I see is the background scrolling slowly and jerkily, none of the buttons at the bottom work. Reboot into Windows 7 and IE8: the same site is fast, smooth, the buttons work and the product details appear correctly in the centre of the screen.
I've tried disabling all adblock /pop up block options, ensured all javascript options are enabled and no change. Could this be a problem with the 64 bit flash player (installed from leigh's sticky thread) or a problem with OpenJDK?
Only asking if there is any official NVIDIA drivers for 64bit of fedora ?
And, What is the best alternatives ?
Also, What is the best graphics card to use with Fedora 64bit so i buy it ?