Software :: Xorg: Support For Multihead Still Exists?
Apr 10, 2011I'm wondering if support for multihead (multiple KVMs connected to a single computer) still exists in Xorg
View 6 Replies
ADVERTISEMENT
OpenSUSE Hardware :: Keyboard Layout In Xorg Without Hal Support
Mar 25, 2010I just switched to xorg version wich has dropped HAL support. I was wondering how i can change keyboard layout as the default isn't correct. Should I add an udev rule, create a file in xorg.conf.d or can I enter the right layout anywhere in an existing config file xorg do reads that i'm missing?
View 3 Replies View RelatedGeneral :: Configuring Xorg.conf On RHEL5 To Support Dual Monitors?
Jan 19, 2010My Dell Precision Workstation was shipped in 2003 with RH Linux installed (most likely RHEL 4) - though not sure.
At the time, the dual monitors worked by replacing the X86config file with one sent from Dell.
Since, my disk failed and I had to replace the disk and reinstall RH Linux with the shipped disks, RHEL 5.
Now, I can not find X86config; rather, I have been trying to update the Xorg.conf file with no to limited success.
Both monitors are driven off of one Nvidia Quadro FX 1300 videocard. My goal is to get the screen to span both.
Does anyone have a Xorg.conf file that would support this?
Software :: Xinerama Multihead Setup With NVidia 9800 GT?
Jan 30, 2011Recently installed Slackware, and now trying to get my two monitors working nicely. After much hair-tearing I've got Xinerama set up so that each monitor displays separate information.I'm using an nVidia 9800 GT dual-headed graphics card. This is my xorg.conf file:
Code:
Section "ServerFlags"
Option "Xinerama" "ON"
EndSection
[code]....
then the mouse is stuck on the right screen. It seems to recognise that the physical right monitor is the virtual right monitor, but if you try to move off the left side of the screen, it appears on the right side of the same screen. This seems to be similar to the bug described here, but that's meant to be fixed in v1.2.3 and I have v1.5.0 (according to pkgtool). I have also considered physically swapping the monitors, but then I would have to edit all the other OSes I use to know about the change, and also on principle I feel I should work out why it's not working...
OpenSUSE Hardware :: Nvidia Driver Plus Multihead Desktop On Laptop?
May 9, 2011Since 11.4 I am having troubles with getting the correct config on my desktop.I am using a laptop, which means a lot of switching between various monitors en projectors.If I start nvidia GUI to change everything works (only as root user). But with the tool from KDE it is not possible to detect any other display than the one from my laptop. It is complaining about randr.However. Nvidia works fine, but I hat it to restart X every time etc. I am using an Xorg with nvidia tool which is not preferable in 11.4.
View 4 Replies View RelatedCentOS 5 Hardware :: Centos 5.4 Hardware - Display Driver Not Support And Also Missing Xorg.config File?
Jun 15, 2011I tried to installed Centos5.4 version on Dell PC intel corei3 inspiron580s and succeeded but found some issues following below
1 Hardware issue for LAN driver ( Broadcomlink(TM)gigabit ethernet)
2 Display Driver not support and also missing Xorg.config file (i.e ., My Screen Starts from center of screen )
3. What is minimum configuration for centos 5.4 ?
OpenSUSE :: Xorg.0.log The The Xorg ATI Driver Is Failing ALL Options?
Jun 18, 2011I found in my xorg.0.log the the xorg ATI driver is failing ALL options.
Code:
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 8.942] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 8.942] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 8.942] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[Code].....
Ubuntu :: Create A Backup Of The Xorg.conf File - Cannot Stat /etc/X11/xorg.conf
Dec 11, 2010I've just done a fresh install of Lubuntu 10.10 on an older Sony Vaio laptop. Having learned the hard way about editing xorg files, I wanted to create a backup of the xorg.conf file so that I dont have to do another install when I screw everything up. In a terminal, I typed
[Code]....
Software :: Xorg-server-1.7.1 Shows Only Blank Screen After Update From Xorg-server-1.6.3?
Jan 5, 2010my laptop is running Slackware64 13.0. Today I tried to update to X.org 7.5 (version 1.7.1) from version 1.6.3 shipped with Slackware. I downloaded the relevant source tarballs from www.x.org and compiled them with no errors. The compiled packages are:
xorg-server-1.7.1
xf86-input-synaptics-1.2.0
xextproto-7.1.1
xcmiscproto-1.2.0
[code]....
My laptop has an NVIDIA graphics card and I'm using the proprietary driver from NVIDIA. Thus I reinstalled the driver after the update and tried to launch X.org with "startx". After a short while the NVIDIA logo appears for some hundred milliseconds and disappears then. But now the screen is blank and it is not possible to switch to another VT via Ctrl+Alt+Fx. But it is possible to login from another computer and restart everything, so that I conclude that the system does not hang.
It is even possible to do work normally with the laptop from remote. If I try to kill the X-server, it ignores SIGTERM and has to be terminated by SIGKILL. But the laptop's screen stays black and empty and does not allow to switch to another VT (chvt terminates with "interrupted system call."). dmesg does not give any errors.
/var/log/Xorg.0.log:
Code:
X.Org X Server 1.7.1
Release Date: 2009-10-23
X Protocol Version 11, Revision 0
[code]....
Server :: Driver Support - QME2572 - Qlogic - Card Became Support By The Kernel
Jul 10, 2011I'm trying to find out when QME2572 (Qlogic) card became support by the kernel. We have a RHEL 5.1 system that is moving to new hardware, however the kernel at this release doesn't support the new hardware, due to the Qlogic card change. I tired the Redhat KB and Bugzilla. Is there a Kernel change list etc I can search. Never really played around with the kernel too much so I'm just after some pointers for looking up this information. Offically its not supported until Redhat 5.3, I'm trying trying to research kernel info so I can tell the customer they have to upgrade.
View 3 Replies View RelatedUbuntu :: Sudo Xorg -configure" And "sudo Xorg --configure" Both Return "xorg Command Not Found
Mar 28, 2011Alright setting up a friends netbook, display has been a little iffy (slow. glxgears is giving like 100fps). Couple issues: xorg.conf doesn't exist (i know thats typically not an issue) and "sudo xorg -configure" and "sudo xorg --configure" both return "xorg command not found."
glxinfo say that its using Mesa for the software rasterizer and that the driver is from mesa. lspci says the VGA controller is from Intel. I'm thinking xorg is defaulting to vesa for drivers, but I need to know how to change that to the open source intel driver
General :: Ubuntu Can't Support A Higher Resolution That Laptop Can Support?
Apr 14, 2010I have a HP laptop which can support 1600x900. But after I install ubuntu 9.10 on it, it can only support up to 1280x700. My laptop has a Nvidia graphics card. And i am using GNOME as my desktop environment.
View 1 Replies View RelatedHardware :: Xorg.conf Is Replaced With A Default Xorg.conf After Reboot ?
Apr 9, 2010I have installed Kubuntu 8.04.2 on a USB stick with persistence to keep any changes I make after a reboot and it works fine. I then installed the 185 Nvidia driver to give me higher resolutions and it works fine.
But each time I reboot, my updated xorg.conf is replaced with the default xorg.conf that ships with that version of Kubuntu and a backup is made of my updated xorg.conf (the correct one) which looks like xorg.conf.20100409135913. I have to put the backup xorg.conf back in place to get my Nvidia driver to work with the correct screen resolutions again. Otherwise my screen resolution is too low.
What could be causing this behavor? I'm sure it not the persistence feature of the USB stick failing since a backup is made of my original xorg.conf.
I might add more information. The xorg.conf that gets changed after a reboot says "This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database." #
Slackware :: Difference Between Files (xorg.conf And Xorg.conf-vesa)?
Feb 16, 20111. What is the difference between files (xorg.conf and xorg.conf-vesa)
2. No matter how hard I try I can't change keyboard layout in xorg.conf-vesa (I change it in file ) but there is no actually anything changing, it starts to get annoying - for example - below goes my xorg.conf-vesa, if I uncomment and set line from
[Code]...
Fedora Installation :: Wine Installation Produces Error "xorg-x11-drv-nvidia Conflicts With Xorg-x11-drv-catalyst" On 11 64bit
Oct 8, 2009Error: xorg-x11-drv-nvidia conflicts with xorg-x11-drv-catalyst
Error: xorg-x11-drv-catalyst conflicts with xorg-x11-drv-nvidia
I have followed the guide to install ATI proprietary drivers using RPM Fusion.
Debian :: EXFAT Support Vs NTFS Support ?
Aug 25, 2010I'm looking to dual-boot Windows 7 and Debian 6 upon its release on my sister's laptop. I want to share a partition between the two of them so that /home points to this directory and the Windows equivalent also points to it (C:Users).
Anyway, I've heard good and bad things about the NTFSMount driver (I think it's NTFS-3G now) and the NTFSprogs project and so I am not so certain what I should believe. I do know that NTFS has relatively high overhead, though I do not recall the source of this assertion, so I am considering the use of EXFAT. An open source EXFAT project is hosted on Google Code at [url] and it utilizes the kernel module FUSE.
I'm quite certain that I've got everything covered on the Windows side -- that is, I know that both NTFS and EXFAT will be suitable filesystems for my required usage.
My issue is that I'm curious which will have superior performance and stability in Debian. I planned on building the package from source and mounting the device in my FSTAB but I have also found a PPA for Ubuntu on Launchpad at [url] that I could borrow the debian/rules from and make a .deb package from.
What do you guys think? Should I go at it with the EXFAT or NTFS partitioning? Is NTFS-3G actually fairly supported at this point? Or perhaps should I consider some alternate method?
I have also considered that the only files she will be sharing are those of music, videos, and pictures so it could be better to just link /home/xxxx/Pictures (Music and Videos, too) to the new partition instead of all of /home.
Software :: Support For Wi-fi Midi Support In Linux?
May 11, 2011I would like to know if it is possibile to have support for wi-fi midi support in linux.
View 1 Replies View RelatedOpenSUSE Install :: Precedence Of Xorg.conf Over Xorg.conf.d?
Jan 26, 2011I've read the how-tos (thank you oldcpu!) and wikis about how xorg.conf take precedence over the section configuration files in etc/X11/xorg.conf.d/, if it exist. I also understand that the xorg.conf can be partial. If it is missing some sections, these will be taken from the corresponding xorg.conf.d section config file. Currently I'm using a xorg.conf generated by nvidia-settings in one of my home machines, due to a dual-monitor setup. After generating xorg.conf, the device sections are:
in xorg.conf:
Code:
Section "Device"
Identifier "Device0"
Driver "nvidia"
[code]....
My question is if the Option "UseCompositeWrapper" "True" will be used or not. In other words, if a section exist in xorg.conf then it's correspondent in xorg.conf.d/ will be completely ignored *or* only the lines in xorg.conf.d/ that already exist in xorg.conf will be ignored?
Ubuntu :: Editing Xorg.conf - /etc/x11/xorg.conf Does Not Exist
May 3, 2010I'm running the ubuntu based Green OS and cant get my video card properly configured. i've already gone through the forums to figure out what i need to do to get my ATI card working but my system wont let me access the xorg.conf file. i can see it using the the GOS file editor but it wont let me save the modifications. when i attempt to edit from a terminal window with su privelages it tells me that /etc/x11/xorg.conf does not exist. i've even tried booting into recovery mode and using the root instead of the sudo command. nothing i've tried will let me open the file.
View 3 Replies View RelatedOpenSUSE :: Repository Already Exists?
Dec 5, 2010i'm getting this error after trying to install any .rmp package. I've tried
sudo zypper rr 2
sudo zypper rr1
sudo zypper clean -a
[code]....
Ubuntu :: Deb Command Does Not Exists?
Aug 19, 2010I downloaded the latest version Ubuntu from ubuntu.com and I am trying to install Oracle XE from the below link but for the first step couldn't find "deb" command, is the command replaced[URL]
View 3 Replies View RelatedOpenSUSE :: Command No Longer Exists On 11.2 And 11.3?
Apr 1, 2011MySQL used to have a command named 'perror' to show the meaning of error codes. It seems that this command no longer exists on 11.2 and 11.3. Did it change the name?
View 2 Replies View RelatedOpenSUSE :: Knowing If A Prepackaged .rpm Exists Somewhere
Jun 23, 2011I am being tired of this old 3.6 firefox, want to upgrade to firefox 5. It is of course available at mozilla.org for my 64 bits suse, but i would like to know if a pre packaged .rpm exists somewhere ?
View 5 Replies View RelatedUbuntu :: Bug Exists In Default CD DVD Writer
Jan 26, 2010i think a bug exists in the default cd dvd writer for ubuntu. where would i report that?it asked whether id like to use the third iso standard because the file was larger than 2 gigs, and i did, and the checksum failed at the end, reporting an error and confusing me for a few minutes.
View 3 Replies View RelatedUbuntu :: Duplicate Name Exists On The Network?
Jul 14, 2010i have network ( 5 windows and one ubuntu )simply i changed the hostname of my ubuntu pc and changed the workgroup name put the old pc name ( old hostname ) still on the network also the old workgroup name
View 2 Replies View RelatedGeneral :: Check File Exists
Feb 20, 2010I have scenrio where i have to check first whether the files exists or not then count of records should not be equal to zero and file should be of current day not the previous day then only process my next task.There are three files totally.please let me know how to write script to achieve the same.
View 2 Replies View RelatedGeneral :: File Exists And Yet It Doesn't?
Jul 11, 2011I have a rather strange issue I'm attempting to fix here. One of the servers I work with had a log file reach 2GB in size and stopped logging. The software which is logging to said file cannot be stopped or restarted and does not provide a way to rotate log files -- poor design, I know. So in my infinite wisdom (or stupidity, however you want to read that), I truncated the log file in place with:
Code:
>vmsproxy.log
When I realized the log file was not being appended to, I checked lsof output and it
[code]...
CentOS 5 :: /dev/sda No Longer Exists After Reboot?
Aug 6, 2009After rebooting my centos server I no longer have a /dev/sda entry, nor any /dev/sd* entries. What could have gone wrong?
View 1 Replies View RelatedFedora :: Does Pthread-stubs Exists As A Package
Dec 16, 2009I have searched and found nothing.... I'm trying to install the DRI driver to make my RV200 ATI card work with 2d and 3d features. I am new to this linux world but I have probably read now 4 hours of installation procedures without fully knowing what I'm really doing.... (Some instructions assume too much from the knowledge of the user I think)... So I'm at the step where I,m building the libdrm (Step 1.3 from this procedure [URL] and I get the following error: checking for PTHREADSTUBS... configure: error: Package requirements (pthread-stubs) were not met: No package 'pthread-stubs' found
Now yum tells me that no package exists with such name. I have searched on google quite a bit and I really don<t know where to start digging at this point.
OpenSUSE :: Pypar2 For 11.3 - Error : Repository Already Exists
Nov 1, 2010I have tried to install pypar2 on my system through an rpm package on a website, but I get the error code: repository already exists.
View 3 Replies View Related
