i have network ( 5 windows and one ubuntu )simply i changed the hostname of my ubuntu pc and changed the workgroup name put the old pc name ( old hostname ) still on the network also the old workgroup name
View 2 RepliesI have setup a dual boot machine which has OS of Windows Vista (32 Bit) / RHEL 5. The LAN Card details are - Atheros L2 Fast Ethernet 10/100 Base T - Controller. The said Network Card works fine with the ADSL Connection in Windows OS, but does not seem to initialise in Linux. When I run "ifconfig" in terminal window it gives away the prompt - "eth0 no such device exists".Although it shoes the loopback adapter (lo) device working fine. I forgot to mention over here, I have just started with Linux. So, I request "the" Linux Gurus to help me out with this one.
View 1 Replies View RelatedThis is more of a cosmetic issue than anything, I guess, but it's kind of annoying so I'm trying to understand the reasons for it.I currently have two computers running on my upstairs network.One is a Mac running OS X Snow Leopard (with Windows Sharing enabled and nothing else) and the other is now running Fedora (15).When I look under Browse Network in Nautilus, I see two icons for my Mac.One seems to point to my system via the IP address and the other via the short hostname. If they represented seperate network protocols, I could understand it but they're both representing SMB connections. So my question is WHY? I added the IP and hostname to Fedora's hosts file thinking it might "unify" the presentation here
View 1 Replies View RelatedOnce I setup winbind, samba, and krb5, and I attempt to join the machine to the domain, I get an error message as follows:
net ads join -U user@domain
Failed to join domain: failed to lookup DC info for domain 'XXX.COM' over rpc: Duplicate name on network.
How can I correct this?
I'm nearly at the end of creating a shell script that automates changing network settings by prompting the user for desired settings, then applying them.
In the course of my development, I created temporary copies of /etc/sysconfig/network-scripts/ifcfg-eth0 (/etc/sysconfig/network-scripts/ifcfg-eth0_tmp1, for example) so as to not alter the original file. Little did I know that on boot the system would attempt to load each of these kinds of files and associate it with an ethernet connection, in this case eth0.
So..... now there are multiple copies in the /etc/sysconfig/network-scripts diretory that essentially have the same settings. They are..
/etc/sysconfig/network-scripts/ifcfg-eth0
/etc/sysconfig/network-scripts/ifcfg-eth0_tmp1
/etc/sysconfig/network-scripts/ifcfg-eth0_tmp2
Now when the system boots, it attempts to load them all. The boot doesn't appear to complete, and I can't ping, login, or otherwise access the system through convention routes (putty, etc.).
The easy solution would be to delete the tmp files and reboot. Now, how do I do that without being able to log in to the server. It's a VM by the way, if that makes a difference.
I downloaded the latest version Ubuntu from ubuntu.com and I am trying to install Oracle XE from the below link but for the first step couldn't find "deb" command, is the command replaced[URL]
View 3 Replies View Relatedi think a bug exists in the default cd dvd writer for ubuntu. where would i report that?it asked whether id like to use the third iso standard because the file was larger than 2 gigs, and i did, and the checksum failed at the end, reporting an error and confusing me for a few minutes.
View 3 Replies View RelatedI'm working on my first bash script. My script will do several things but right now I'm just trying to get the basic part of it down and working.I have a section that looks like this
Quote:
#/!bin/bash
SERVER=$1
if [ ! -d `ssh ${1} /somedir`];then
echo "Bad"
[code]...
The problem is that if you take that right now and run it, it will return back good in that it does exist. What I need it to do is pass back that it's bad because it doesn't exist (that is unless you actually do have that directory in your root).
I have an external css filewith...
Code:
#bg {
margin:0 auto;
[code]....
I have a very strange problem.Few days ago everything was working fine.Now every site I'm developing under /var/www doesn't open at all.If i have a file /var/www/siteone/index.php, when i try to open http://localhost/siteone/index.php it's not opening. And IT USED TO OPEN few days ago.It seems that php is working: http://localhost/index.php is working.I'm using .htaccess in subfolders. I remove it for tests - nothing changed.What new i did to my Ubuntu:Installing of VMware Server 2.0.2 + Windows XP as a guest. Works fine.Strange error/warning from error.log in apache2 folder:PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php5/20060613+lfs/apc.so' - /usr/lib/php5/20060613+lfs/apc.so: cannot open shared object file: No such file or directory in Unknown on line 0[Sun Jan 24 18:34:02 2010] [error] [client 127.0.0.1] File does not exist: /var/www/siteone/localhostWhy this localhost appears at the end of line?I'm using linux/ubuntu for about 3 months already - i'm not confident with it.
View 2 Replies View Relateddoesn't the chkconfig command exists for ubuntu? or is it only for red hat systems?
View 9 Replies View RelatedI'm setup on a virtual dedicated server with a host running ubuntu, but I'm trying to setup subversions.Now I can set it up in say /svn/myrepository But I want to set it up on one of my websites e.g.
/var/www/vhosts/example.com/httpdocs
but when i run svnadmin create on httpdocs i get the following error.
svnadmin: Repository creation failed
svnadmin: Could not create top-level directory
svnadmin: 'httpdocs' exists and is non-empty
Slowly but surely learning to live without synaptic. How do I find out which packages exists (and what they do) using apt-get?man apt-get does not give the answer or I don't see it in there.
View 8 Replies View RelatedI want to create a file in the /root directory and then make sure it exists. The following code keeps telling me that the file doesn't exist even though it does.
Code:
#!/bin/bash
echo -e "username=someusername
passwordsomepassword" | sudo tee /root/.credentials
if [ -e /root/.credentials ]; then
echo "File exists!"
[Code]...
[Edit] Added second double quotation mark at the end of "somepassword"
1)I had download one hello.c for start working for Device drivers , and compile it . . I am using linux kernel 2.6.xx getting this error :
Error : linux / module.h file donesnot exists .
2) ad build the kernel and still getting the same error .
I seem to be having some problems with the clipboard. If I copy something in firefox, then quit out of firefox, the thing I copied no longer exists. I don't think this used to happen, I'm sure I would have noticed before now.
View 4 Replies View Related10.10 64 bit clean install. If you download software via Software Centre, terminal or Synaptic will you automatically download, if it exists, the 64bit version?
View 2 Replies View Relatedi'm getting this error after trying to install any .rmp package. I've tried
sudo zypper rr 2
sudo zypper rr1
sudo zypper clean -a
[code]....
I finally got round to transcribing our wedding video from VCR to DVD. Now I would like to duplicate that video a few times and pass copies round the family, more to preserve it than to bore the relatives.
I dragged the DVD icon from the desktop to a thunar (file manager) window and it created a folder containing this lot code...
Total size 1.3 GB.
But I have no idea what to do with these files.
I tried this command code...
and ended up with a 4.4 GB file, which Archive Manager says contains the above folders, and presumably also contains an image of 3.1 GB of formatted but unused disk.
What's the best thing to do here? The ISO file will presumably burn a good DVD copy but it's a waste of disk space to keep it, (I'd like to keep a copy on hard disk too) and I guess will also take needlessly long to burn.
Can I create a smaller ISO from the file folders? If so, is there an app to edit the titles before I do so? The recorder put a second title "Empty Title" on the title page which I'd like to get rid of. I discovered by accident that the VOB files play in parole media player - one is the title screen, and the other two contain about half the video each. So I don't know what all the other files are about.
I just installed OpenShot from Ubuntu Software Center. When I want to launch it, it displays nothing, then I try from terminal and I get this:
Code:
OpenShot (version 1.1.3)
Process no longer exists: 15049. Creating new pid lock file.
A new frmMain has been created
Segmentation fault
2 month early I was at Ubuntu 10.04 beta and this problem occurred in : VLC, OpenArena, FileZilla etc. and I made a fresh install in April. I configured Ubuntu and have lots of important files, A fresh install isn't an option for me.
I am running Ubuntu 9.04 at work and have a sudden need to install a newer version of python-support (> 0.9.0) than is currently available in the repo (0.8.7) for my Ubuntu version. Upgrading to 9.10 is not an option as we are planning to jump to 10.04 LTS in the next few months and I am unable (unwilling) to mess with a complete upgrade prior. Is it possible for me to upgrade to the newest version of python-support - or is this package OS version specific? Assuming it's possible, how might I go about the process of upgrading?
View 2 Replies View RelatedMy kernel is not updating and I'm getting errors like.........
[Code]...
Is it possible to set up a udev rule that will check if a file exists on a USB drive?
I've got a few ubuntu servers in environments with some very not-techy peoples. Im hoping to get to the point where I can give them a few USB sticks with scripts on them, and if they plus one of these sticks in it will be mounted in, say, /media/special (rather than /media/usb0..7) and then the script would be run. But if a usb drive without special.sh is inserted, it should be mounted to /media/usb0..7 as normal.
I've been googeling for udev rules, and it seems simple enough to specify a mount point based on brand/model/serialnumber/etc... but i havent been able to find anything about checking for the existance of a file.
Tho the more i think about it, the more im starting to think its not going to be that straight forward. Can udev check for a file on a drive before that drive is mounted? Is it going to be a case of mounting every drive to /media/usb0..7 then having a script run that will check for the file, and if its there change the mount point before running special.sh?
MySQL used to have a command named 'perror' to show the meaning of error codes. It seems that this command no longer exists on 11.2 and 11.3. Did it change the name?
View 2 Replies View RelatedI am being tired of this old 3.6 firefox, want to upgrade to firefox 5. It is of course available at mozilla.org for my 64 bits suse, but i would like to know if a pre packaged .rpm exists somewhere ?
View 5 Replies View RelatedI have scenrio where i have to check first whether the files exists or not then count of records should not be equal to zero and file should be of current day not the previous day then only process my next task.There are three files totally.please let me know how to write script to achieve the same.
View 2 Replies View RelatedI have a rather strange issue I'm attempting to fix here. One of the servers I work with had a log file reach 2GB in size and stopped logging. The software which is logging to said file cannot be stopped or restarted and does not provide a way to rotate log files -- poor design, I know. So in my infinite wisdom (or stupidity, however you want to read that), I truncated the log file in place with:
Code:
>vmsproxy.log
When I realized the log file was not being appended to, I checked lsof output and it
[code]...
After rebooting my centos server I no longer have a /dev/sda entry, nor any /dev/sd* entries. What could have gone wrong?
View 1 Replies View RelatedWhenever I edit a spreadsheet in Gnumeric, I have to have an argument about saving the edited version. First, it says it wants to save it in Gnumeric's XML format instead of whatever format I opened it in, and then I get a dialog warning me the file already exists,is it OK to overwrite it? All my spreadsheets are either .odt or .csv. I just want to be able to open, edit and save without an argument every time. It's like telling a child that it's bed time and having the same argument every night, and it's getting on my nerves.Is there a setting where I can get gnumeric to obediently save the edited version, or do I just have to put up with the slower opening times of LibreOffice instead?
View 4 Replies View RelatedI tried to put a terminal in the desktop using more or less the procedure described in this article:
[URL]
It worked fine, but then I installed avant-windows-navigator and I think it created some conflicts with compiz and other applications.Both the desktop terminal and Skype started to appear in duplicate when I logged in. So I went to the startup applications menu and disabled them both. When I logged back in they both appear only once, but the terminal is in the wrong spot in the desktop.So there are probably some startup registers somewhere that are causing this.i've tried reinstalling compiz and I uninstall AWN and it didn't work.