I have a Asus RT-n12 router with DD-WRT v24-sp2 (12/19/10) mini(SVN revision 15943M NEWD-2 K2.6 Eko)I can not get my rsyslog on my linux pc to log messages from the router. I did a netstat -arn and got:
Code:
Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
[code]...
I'm having issues setting up rsyslog to receive syslog from another server and only log to one file. I'm receiving the syslog from the remote side, however its putting the entries into more than one log file.
I configured /etc/rsyslog.conf to enable udp, and I have implemented a filter to log only from that IP address, and then stop processing more rules, but it seems to continue on.
I have found that the remote syslog events are using local0 and local1. There are two custom rsyslog config files in /etc/rsyslog.d that handle those two facilities. If I use that same if statement at the beginning of those custom config files, I can get it to work. Seems like a hack though.
Not working:
I put my if statement before the include statement, thinking I could stop it from hitting the custom rules.
Code:
Select all# /etc/rsyslog.conf Configuration file for rsyslog v3.
#
# For more information see
# /usr/share/doc/rsyslog-doc/html/rsyslog_conf.html
#################
#### MODULES ####
#################
$ModLoad imuxsock # provides support for local system logging
$ModLoad imklog # provides kernel logging support (previously done by rklogd)
#$ModLoad immark # provides --MARK-- message capability
[Code] ....
This works:
A custom config file in /etc/rsyslog.d
Code: Select allif $fromhost-ip == '<my ip>' then /var/log/<my directory>/syslog.log
& ~
local0.* /var/log/<a log file for local0>.log
This is on a WD Mycloud device:
Code: Select allLinux WDMyCloud 3.2.26 #1 SMP Tue Jun 17 15:53:22 PDT 2014 wd-2.2-rel armv7l
The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright.
I have a syslog-ng running and kernel build of 2.6.34.8 I use a syslog API in my program with facility LOG_LOCAL5 and and levels debug err and crit and info. when I ran on the older syslog facility I had everything logged fine as I intended. now I have written these rules into the syslog-ng.conf:
options {
flush_lines (0);
time_reopen (10);
log_fifo_size (1000);
[code]....
the last two rules show my program gnssapp. the result is all debug levels or crit or err levels I don't see any of them !
After struggling and googling on the internet I can't manage it to work.I have stup rsyslog to receive the logging from my firewall and it puts it into the syslog file.ut I would like to have a separate logfile for these messages.I have created the firwall.log file with owner syslog, same as for the syslog file.I already have tried to use in the /etc/rsyslog.d/10-firewall.conf the following ::msg, contains, "firewalld" /var/log/firewall.logor
:msg, contains, "firewalld" -/var/log/firewall.logI don't know the difference between the "-" sign in the lines but I have seen also those kind of situations.
I also have put this line into the 50-default.conf file because I thought it wasn't seeing the 10-firewall.conf file but no work.I have added a $template HostMessages, "/var/log/%HOSTNAME%/logfile.log" in the /etc/rsyslog.conf file but neither it works.In the firewall I can see the Syslog facility is now on LOG_LOCAL0 and I can change it from LOCAL0, LOCAL1, LOCAL2, ... until LOCAL7What does these different numbers mean
I'm using Red Hat Enterprise Linux Server release 5. In this whenever a user process crashes due to segmentaion faults , it was not logged in /var/log/messages. Even dmesg is also not showing any messages related to this.
Where as in another distributions(Cent OS 5) I've seen segfaults messages in /var/log/messages whenever my user process crashed.dmesg also showing the segfaults.
Is there any settings that to enabled so that it logs segfaults into /var/log/messages.
I cross checked /etc/syslog.conf of both the systems. Both are same and even /etc/sysconfig/syslog files.
I use python 2.6 logger to log to a file. But now I want it to be part of /var/log/messages.
Any tips/pointer/guide on what to do?
Generally SSH related log messages are logged in /var/log/messages file. Is there a way to log them in another different file? I mean is there some configuration setting to enable this?
View 7 Replies View RelatedI am facing a problem while trying to log SSH messages in a separate file, say, /var/log/ssh_logs. I have tried modifying the syslog-ng.conf file as follows:
filter f_ssh { facility(auth, authpriv) and match("sshd[[0-9]+]:"); };
destination d_ssh { file ("/var/logs/sshd_logs"); };
log {
[code]....
But still I am not able to get the ssh logs in the new file. They continue to go to /var/log/auth.
I�m looking into preventing the samba messages from appearing in the system log (/var/log/messages).I added syslog = 0 to smb.conf and reloaded the config but messages are still appearing�suppress logging or reconfiguremba such that the �nmbd� and �winbindd� messages do not appear in /var/log/messages
View 4 Replies View RelatedI've got a Shorewall (Shoreline?) firewall up and running, but it's logging to /var/log/messages. I'd much rather have it logging to another location e.g. /var/log/firewall but can't find (a clear enough) explanation on how to do this. Apparently, it varies greatly depending on the distro, the kernel, and the version of Shorewall that is running. You'd think it would be something as simple as setting a path in a config file, but apparently not. I'm running a stock Lenny kernel on the firewall machine. It comes with version 4.0.15 of Shorewall.
View 9 Replies View RelatedI wish to prevent the samba messages (mainly nmbd and winbindd) from appearing in the system log (/var/log/messages). I want to allow samba logging to the standard samba logfiles, but prevent the syslog getting clogged up by samba. I added syslog = 0 to smb.conf and reloaded the config but the messages were still appearing. I also tried the following (and restarted the syslog via /sbin/service syslog restart) # Suppress messages from samba.
nmbd.* /dev/null
smbd.* /dev/null
winbindd.* /dev/null
For interests sake the messages I'm getting are below (I'm not concerned about the messages themselves, I can chase them up at my leisure via the samba logs) Mar 18 09:58:29 SERVER nmbd[3808]: query_name_response: Multiple (2) responses received for a query on subnet xx.yy.z.zz for name DOMAIN<1d>. Mar 18 09:58:29 SERVER nmbd[3808]: This response was from IP xx.yy.z.zz, reporting an IP address of xx.yy.z.zz.
I saw rsyslog is now installed in Debian Lenny instead of syslog. I want to send local iptables log to remote server. I modified the file config /etc/rsyslog.conf like this :
# provides UDP syslog reception
$ModLoad imudp
$UDPServerRun 514
[code]...
Has anyone gotten rsyslog to accept messages from remote hosts? I've tried half a dozen methods for getting it to capture syntax, all unworking.
View 8 Replies View RelatedI have upgraded to 10.04 or tried to at least. I have a server at OVH and it was running 8.04 desktop and I decided to upgrade it to 10.04 little relizing that OVHs kernels didn't work with 10.04 so after the reboot phase it ended up going into a netboot rescue mode.
I have got the latest kernel from the kernal.ubuntu area and installed it. Run grub-update, reboot... Nothing. So I decided to run apt-get install just to make sure there was nothing that needed to be installed.
The following is what I have got
Code:
Now from my research this means that I don't have a bootable system.
The following is the response I got from OVHs team
Code:
Have any detail configuring RSyslog on ubuntu 10.04? with web interface view
View 2 Replies View RelatedI am trying to install rsyslog 5.4.0 with relp on CentOS 5.5 (vmware). My installation steps:
yum install gcc.i386
liblogging-0.7.1:
./configure
[code]...
We want to begin centralizing our system logs to a dedicated server, using a daemon that is flexible and offers more features. After some research, I decided to give rsyslog a whirl (versus syslog-ng).roblem has come down to compilation errors which, unfortunately, I've not been able to resolve otherwise (rsyslog forums) and it appears this is a larger problem with the product. So before I begin making another decision, I wanted to get some input from others here.Here is a snippet of the errors:
Code:
/usr/local/src/rsyslog/rsyslog-5.4.0/runtime/queue.c:1291: undefined reference to `ATOMIC_SUB'
[code]...
I was wondering how could I specify for how long the logs will be kept. Rsyslog doesn't have such an option (at least I didn't find it).Do I have to use logrotate for this, or is there some other option?
View 1 Replies View RelatedI am trying to install rsyslog 5.4.0 with relp on CentOS 5.5 (vmware). My installation steps:
yum install gcc.i386
liblogging-0.7.1:
./configure
make
make install
[Code].....
/usr/local/lib/rsyslog/omrelp.so exists with permission 755 owned by root. I read some similar posts but older version of centos, rsyslog, librelp and rebuilding the packages could not help.
I'm trying to run a logging server with encryption but rsyslog takes 100% of the memory on boot. This only happens when these two sets of lines are both in the rsyslog.conf
Code:
$ModLoad imtcp
$InputTCPServerRun 10514
and
Code:
$DefaultNetstreamDriver gtls
[Code]...
How do i find the file /etc/rsyslog.conf so i can modify it.
View 1 Replies View RelatedI have been trying to create an rsyslog config for a software package that I use. I want to use the local7 facility for this package, and split the messages according to priority across several files. I would like the config to be a file which can just be dropped into rsyslog.d without having to modify the rsyslog.conf or 50-defaults.conf. I created a file called 40-test.conf, in which I have the following:
local7.none /var/log/messages
local7.none /var/log/syslog
local7.=info -/var/log/test.info
local7.=debug -/var/log/test.debug
local7.=notice;local7.=warning -/var/log/test.notice
local7.=err -/var/log/test.error
I am getting the correct local7 messages in the correct 'test' files, but i am also still getting local7 messages in /var/log/messages and /var/log/syslog, so it seems the local7.none has no effect. Is this the correct method of achieving what I want? What am I doing wrong?
Not sure if this is the correct area to ask this question as it pertains to Upstart but not necessarily to Ubuntu.
Anyhoo, I have made a small alteration (obviously the cause of error ) but not really sure why it does not work.
rsyslog.conf:
Code:
# rsyslog - system logging daemon
#
# rsyslog is an enhanced multi-threaded replacement for the traditional
# syslog daemon, logging messages from applications
[Code].....
I am thinking about installing rsyslog using yum, but I only want to try it out first and don't want to create conflicts and problems that will be hard to revert. When I ask yum on CentOS 5 about rsyslog, I get this (note much older version - it's too bad that even the latest STABLE rsyslog isn't in the repository):
[Code]....
I try to log all my iptable logs to mysql instead just a logfile. The setup is as followed:
[Code].....
[red]Problem[/red] rsyslog logs everything correct, except it does not log to db, it logs to /var/log/messages. As I am brand new to the whole Linux experience, I don't get it. My /etc/rsyslog.conf is setup with $ModLoad onmysql.
I am searching that how i can configure syslogs/rsyslog to receive third party tools or softwares logs. For example i have a program that generates logs like when it is started and logs about its services, alerts if there are any alarms etc. I want to forward these logs using syslogs/rsyslog. Is their any possibility how can i achieve that
View 2 Replies View RelatedI have set up one Fedora 10 server.I found that rsyslog service is running on Fedora 10 server.How to configure rsyslog on Fedora 10 to collect the log from Cisco ASA5510 ?
View 2 Replies View RelatedFor internal security reasons I need to prevent ourmcat logs from writing to the webserver local disk. We set up a separate logging server with rsyslog and need to pipe the log data to it.I am trying to work out how to configure tomcat to send all log data to the logging server via the rsyslog client (running locally) via a named pipe. We are on CentOS 5.6, Tomcat 6 and rsyslog 5.8.1. I need to know: 1) do we use the default logging library or log4j2) where is this configured in the tomcat config3) is there any code that would need to be written to achieve this
View 1 Replies View RelatedMore than 7 G bytes were logged to the messages file last three weeks I got this message in /var/log/messages I want to stop this messaging cause it takes to much space
Quote:
Apr 30 20:25:18 TEST-NODE kernel: IPT: IN_NOMATCH IN=eth0 OUT= MAC=ff:ff:ff:ff:ff:ff:00:17:a4:a7:3d:a2:08:00 SRC=172.26.16.27 DST=172.26.16.255 LEN=104 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=10100 DPT=10100 LEN=84
[code]...
I Have been trying to change a file in filestarter using sudo /etc/rsyslog.conf. but am getting a permission denied message. How do I get into this file to change it ? Firestarter is working ok but for some reason it cannot open the system log. I Have found what amendments need to be made to get this to work but simply cannot get access to the file
View 2 Replies View Related
