Does anyone know the Code to automount/autofs? I can't tell if my mount points are truly NOT mounted when not accessed. Especially since they show up in /proc/mouts:
Code:
localhost mnt # cat /proc/mounts
rootfs / rootfs rw 0 0
[code]....
How to get my USB trust webcam working on Ubuntu 10.04.
View 4 Replies View RelatedI am trying to get my Trust TB-6300 drawing pad to work..
View 1 Replies View RelatedI have postfix relaying email to the internet for my LAN I need to configure postfix to trust only one SMTP server to relay his emails to the internet
View 4 Replies View RelatedThe cryptographic underpinnings of the Internet, as presently constituted, are messy, chaotic and rather randomly constructed. And that infrastructure is not only ripe for a variety of attacks, but is not easily fixable, a group of experts said Friday. At a forum on browser security sponsored by a Washington policy think tank, a group of technologists and policy experts from industry and government outlined the serious architectural and implementation problems with SSL, the certificate authority infrastructure and the way that browsers handle certificates. It was not a pretty picture. The problems extend from the way that CAs issue certificates to how certificates are handled by the major browsers to the way that attackers are able to take advantage of the weaknesses throughout the system.
View 1 Replies View RelatedI've just bought a new, cheap webcam. The manufacturer is "Trust", who builds chips of Microdia in their products. So, I plugged my new webcam, noticed that the driver obviously is missing and I finally decided to use Google.
Well, there were some tutorials which include manual installation of gspca (which should be included in the recent kernel files, but somehow isn't). So..I tried the manual installation and it aborts with the message, that there was some error in one of the code files..however.
I continued searching for a solution and found it on the German Ubuntu community page, ubuntuusers.de. Their wiki says that I have to run the following commands that download and compile the right drivers for my webcam. Or at least they should do so.
Code:
Code:
Code:
Code:
Code:
Code:
Code:
And eventually it should work properly. So far the theory. In fact it aborts at exactly this point:
Code:
And gives the following error message:
Code:
Well, urm. I guess I'll have to install that missing module..somehow, but I do not really have hunch.
I need some expert advice here regarding the samba problem after upgrading. All data migrated with the appropriate permission. I transferred the /etc/passwd, /etc/shadow and /etc/samba/* files to the new server.
Previous working version (Slackware v11 - 32bits - Old Hardware)
- samba-3.0.25a-i486-1_slack11.0
- XP Pro users are able to login and authenticate (NT DOMAIN)
- Login script and file sharing with permission are okay too
Upgraded to (Slackware 13.1 64bits - New hardware)
- samba-3.5.2-x86_64-1
- if the PC did not logoff, the file sharing and permission works fine.
- If they logoff, they will not able to re-logon.
- If I detach the PC from domain and then rejoin domain, I will be able to login to the domain, So I guess the samba configuration is working
I read it has to do with Machine Trust Account or something.
- Can I convert or make samba 3.5 recognize the Machine Trust Account on the new hardware?
- How can I check if the if the entry is successfully registered as machine trust account?
I checked and found the 'machinename$' (example) in all three places /etc/passwd, /etc/shadow and /etc/samba/private/passdb.tdb. I see no differences on the one PC that I unjoin and rejoin the domain versus those old domain name join to the old hardware.
I've been using Debian for around ~3 months now, though before that a certain derivative thereof since the start of the year.Long story short is that I was installing packages, as you do, when apt-get prompted that I run apt-get autoremove, as it does. So, trusting the computer, I do, not bothering to read the chunk of packages that it recommends to remove. Life goes on, until a reboot reveals that there are issues.Short story shorter, a quick cat /var/log/dpkg.log | grep remove spits out the following:
root@kubrick:~# cat /var/log/dpkg.log | grep remove
2011-09-05 22:04:09 startup packages remove
2011-09-05 22:04:09 remove gnome-user-share 2.30.1-1 2.30.1-1
[code]....
OpenSUSE and I recently bought a drawing tablet with pen from Trust (tb6300).
How is this possible to make it work in openSUSE?
My server is running Ubuntu. I have no problem adding a windows XP to the domain. I however have a problem with windows 7 laptop. I keep getting the following error
"The user could not be added because the following error has occurred:
The trust relationship between this workstation and the primary domain failed".
I have buy new webcam Trust WB-1400T, connected to my Fedora and got very dark picture with probably bad whitebalance, while on windows, result is much better with the same device.
I tried:
1) HW check, verified - running OK
2) checked, if HW is supported. it is by driver gspca_pac207 with 5 stars
3) dmesg:
4) lsmod :
5) modinfo:
Here is an example of Win / Lin difference :
[url]
[url]
I also tried to adjust camera using v4l
I have this problem and the workstation is on windows 7 and the domain is on samba. My Xp computers are connecting fine just the windows 7 ones.i've even tried to do the registry edit and its not working.
View 2 Replies View RelatedI bought new webcam Trust WB-1400T, connected to my Fedora and got very dark picture with probably bad whitebalance, while on windows, result is much better with the same device.
I tried:
1) HW check, verified - running OK
2) checked, if HW is supported. it is by driver gspca_pac207 with 5 stars
3) dmesg:
4) lsmod :
5) modinfo:
It should be 0x093a Ox2468 , but this isn't rootcause.. or ? it's listed in module aliases..
I also tried to adjust camera using v4l
I need to trust a new Verisign Root cert, I have uploaded it to the /etc/ssl/certs store but I am still getting the Handshake failure error when WorldPay call back to my site..
Quote:
I believe I still need to create a sym link? So I followed this article but I get an error..
Quote:
I have also tried update-ca-certificates.
I'm using Ubuntu 8.04 LTS.
using samba-3.4.5.I am trying for join samba server[on linux] to domain controller[windows2003], with security=domain in smb.conf. net rpc join -U Administrator%MyPassword But it fails with following debug messages.
rpccli_netlogon_set_trust_password: unable to setup creds (NT_STATUS_ACCESS_DENIED) !
rpc command function failed ! (NT_STATUS_ACCESS_DENIED)
get_schannel_session_key: could not fetch trust account password for domain 'MYDOMAIN'
net_rpc_join_ok: failed to get schannel session key for server MYSERVER for domain MYDOMAIN. Error was NT_STATUS_CANT_ACCESS_DOMAIN_INFO.
unable to join domain MYDOMAIN
return code = -1.
i already put a windows 7 in domain, but now i cant login with samba user in windows 7 machine, i recive the error: problem with trust relationship.
View 1 Replies View RelatedIm trying to connect my webcam (Trust 16175) to a Debian 5 box:
Installed:
And with no luck - as I see it the correct driver is not loaded - Using "modprobe gspca" makes no different. I have seen in some papers that the 093a:2621 is supported by gspca. How do I get it to work?
I use named as a local caching nameserver (it has seemed the most stable DNS solution in the past given my ISP's flaky DNS servers) and I've noticed (since using fedora 12) a number of "broken trust chain" messages from named in /var/log/messages, for example:
Code:
named[986]: broken trust chain resolving 'www.bbc.net.uk/AAAA/IN': 212.58.224.20#53
I haven't made much sense of the things I've found via google, and am not even sure if this is a bad problem or not.
I ended up setting up a basic linux file server as a pdc for that office. Our main office is a windows 2000 ads domain. The two offices are connected with a vpn. I only have two users at the new location so I simply have the linux and samba usernames/passwords setup manually. I would like to know if it is possible to setup a domain trust between the two sites so I don't have to create a username/password in the remote site for every user at the main office to access. I did some searching but came up empty.
View 5 Replies View RelatedI m on ubuntu 10.04 and have a Trust tb 4200 tablet.. and having problems with my trust tablet runing on ubuntu.. i pluged in the tablet and to my amaze it started working right away until i pressed the pen on the tablet.. i cant seem to move the mouse curser anymore unless i touch the pen on the tablet. (wich acts as a click) so i thought that i may be missing the drivers.. i checked thes forum and there was a post to install the aptek drivers which i did (but still worked the same) and i found out thet there was no 10-aiptek.fdi (in "/etc/hal/fdi/policy/") so i created one and copied one from a post.. in [url]...3&postcount=50 but still cant move the courser without touching.. its like if it did no diference at all.. i also changed the values in the 10-aiptek.fdi with no changes.. the size of the tablet is just the size of the screen so i am using the full tablet.. and no buttons work...
I think the drivers are not workin.. in the synaptic it shows as intalled...
Code:
Code:
I have a simple usb mount problem, but after looking around, haven't been able to solve it. So far I've come across hal, dev, usbmount,pmount, and got lost in all this.
So, when I plug my usb as non-root I get that "not authorized" message. I solved this by installing usbmount package. After that, as non-root, usb mounts, but I can't write, I only have read rights. I tried changing "MOUNT OPTIONS" in usbmount.conf, but no luck.
What is the proper way of automounting usb and how to control access rights and what user can do what?
I also tried with fstab entries, but everytime I unplug my usb stick and plug it back in, /dev entry changes...
I setup a luks encrypted /home partition on my Debian jessie, with an automount when my usb key containing the luks secret is plugged in at startup.
I did configure /etc/fstab so that my usb key be mounted at startup to /media/usb1, and /etc/crypttab to open my encrypted partition with the key at /media/usb1/homekey. It works.
However, when my usb key is not plugged in, boot fails and never shows welcome screen. I would change this behaviour so that when my usb is missing, boot resumes and do not mount /home partition. How could I manage this?
Is there a way to set up your system (running CLI only, no X) to automount flash drives? I know how to mount them manually, but I'd really like it if there was a way to just have the system do it automatically when I plug the drive in so I don't have to do it myself every time.
View 4 Replies View RelatedI would ask how automounting of devices works in debian. I'm trying to modify the name of automatic mount point from the label name of devices (or their UUID) to the devices name. That because the UUID is often a very complicated string, meanwhile the label often contains spaces; so become difficult working with theme in scripts...
View 7 Replies View RelatedI remember automounting my windows drive (I dualboot windows and fedora) using /etc/fstab.
Now I can't find what to add to the file in order to mount my drive.
The drive is /dev/sda2 and I would like to mount it at /mount/windows, it's an NTFS drive.
I have been looking around the forums and reading the manuals but can't figure it out
On my computer for the last couple of years I have been running Ubuntu and Windows XP in a dual boot system. Due to some unsolvable problems in Ubuntu, I decided to try out Fedora. I created a third partition on my computer and into this partition I installed Fedora. Now when I boot my computer I can either run Fedora or Windows XP. Eventually, I plan to get rid of Ubuntu completely. But for now the Ubuntu partition is still on my hard disk; I can't boot up with Ubuntu anymore, and that's OK. I don't need to run Ubuntu, but I would like to be able to access the Ubuntu partition, since there are files there that I want to keep.
At least I want to be able to read and write to the files in Ubuntu. How can I automatically mount the Ubuntu partition so that I can work with its files from Fedora?
I'm pretty sure that to get the Ubuntu partition to mount, I need to enter some lines into the etc/fstab file. Does anyone know what I should enter into Fedora's etc/fstab file so that the Ubuntu partition will be mounted?
In my Ubuntu installation the partition is named DiskF, it is partitioned in the ext3 file system. In Fedora when I look at /media/DiskF, it is empty.
When I run [code] blkid in a terminal here is the output:
What are the commands that I need to put in /etc/fstab so that when I boot my computer in Fedora DiskF will be mounted?
I configured "removable devices" in system settings as follows:
checked "Enable automatic mounting of removable media"
and
checked "Automatically mount removable media when attached"
Now following reason you would expect when you put a CD/DVD in the CD/DVD player it would be automatically mounted in directory /media/ yes?
But no - you first HAVE to open the CD or DVD with a program (like a file manager) before the directory and its content appears in directory /media/. This is not expected and very annoying.
Why does the configuration screen not work as expected. Are all settings just being ignored or something? If so - then why are those settings there in the first place? Or did I simply done something wrong?
I just want a CD or DVD been automatically mounted when I put it in the player, so I can access it without first having to open it in a separate program.
I managed with fstab but at restart came a black screen.I have called an HD '7200' then I reinstalled Fedora. And it does not automount it anymore. I changed fstab and black screen.
View 5 Replies View RelatedI know how to automount ntfs, what I don't know is how to automount a 2nd ext4 partition. I know I can use code...
What am I doing wrong? Also how can I read and write to and form the root of the partition with out opening it as root?
This is not the partition I have ubuntu installed on, this is a 2nd partition.
I have a problem that I can not decide for 2 weeks. Here is what happened: On my laptop, installed just Windows XP. In the past, when I installed the second system, Ubuntu 9.04 or 9.10 (for dual-boot), Ubuntu asked the administrator password for access to just Windows XP partition. I mean, that just Windows XP partitions were visible, but for the entrance (mount) needed a root password.
Now, in Ubuntu 10.04, Windows XP partition mount automatically and Ubuntu does not require the root password. I do not like it very much.
Tell me please, what do the settings at the time of installation of Ubuntu for just Windows XP that the system would be asking root password for just Windows XP partitions? Is this possible? I think - yes. Because in the past the default 9.04 and 9.10 asked for a password.
PS: I must say, as I put Ubuntu and just Windows: 1. Be installed just Windows XP, giving it 20 GB space 100 GB hard drive. </span>The remaining 80 Gigabytes leave out the implications.
[Code]...