On my computer for the last couple of years I have been running Ubuntu and Windows XP in a dual boot system. Due to some unsolvable problems in Ubuntu, I decided to try out Fedora. I created a third partition on my computer and into this partition I installed Fedora. Now when I boot my computer I can either run Fedora or Windows XP. Eventually, I plan to get rid of Ubuntu completely. But for now the Ubuntu partition is still on my hard disk; I can't boot up with Ubuntu anymore, and that's OK. I don't need to run Ubuntu, but I would like to be able to access the Ubuntu partition, since there are files there that I want to keep.
At least I want to be able to read and write to the files in Ubuntu. How can I automatically mount the Ubuntu partition so that I can work with its files from Fedora?
I'm pretty sure that to get the Ubuntu partition to mount, I need to enter some lines into the etc/fstab file. Does anyone know what I should enter into Fedora's etc/fstab file so that the Ubuntu partition will be mounted?
In my Ubuntu installation the partition is named DiskF, it is partitioned in the ext3 file system. In Fedora when I look at /media/DiskF, it is empty.
When I run [code] blkid in a terminal here is the output:
What are the commands that I need to put in /etc/fstab so that when I boot my computer in Fedora DiskF will be mounted?
I recently installed Fedora 13 (the KDE spin). It detects correctly my other NTFS partitions and will mount them perfectly if I click on it using Dolphin.
I would like to mount one of them automatically after booting (or logging in, doesn't matter). My first idea - and supported by a coulple of Google searches and previous threads - was to put them on on /etc/fstab.
But to my complete surprise they aren't there. Where does Dolphin (or KDE) keeps information about partitions? How to set them to automount? Also, fstab refers to my linux partitions as UUIDs not the device names - how does this work?
What should I do to set a NTFS partition to automount on Fedora 13?
After a new Fedora 12 installation, i cannot automount my Windows partition. My system is setup originally at windows XP ,partitioned, then change to Fedora 10. Change to Fedora 11 through update.System very slow.
I decided to upgrade to fedora 12 by DVD installer, then i have to mount manually to access my back-up, when typing su -c '/sbin/fdisk -l' at terminal, this is the code:
I know how to automount ntfs, what I don't know is how to automount a 2nd ext4 partition. I know I can use code...
What am I doing wrong? Also how can I read and write to and form the root of the partition with out opening it as root? This is not the partition I have ubuntu installed on, this is a 2nd partition.
I installed Storage Device Manager and can't automount my Windows 7 partition. It doesn't show up in Storage Device Manager. When I mount the partition, it comes up as /media/286CC2A6397A0F2A instead of sda# like normal drives.
I'm using Debian Squeeze XFCE along with Windows 7 as dual boot on my notebook. I want to access my Windows 7 partitions from Debian for both reading and writing. I was a Ubuntu user in which the Windows partitions were visible by default. I want to know how to mount the drives used by Windows 7 automatically on startup.
i recently deleted a NTFS partition while ubuntu was running and didnt disable the automount and when i tried to restart from what i can see it is trying to mount the partition which does not exist. When booting it says something to the effect of mounting dev/sda5 (which is now ubuntu) NTFS signature incorrect, what file must i change to allow ubuntu to boot because i kind of dont want to reinstall ubuntu and reconfigure it.
For whatever reason /dev/sda3 (at /tydelik) does not mount itself (like all the other partitions) when the system reboots.
In YaST's expert partitioner it says that:
Quote:
An asterisk (*) after the mount point indicates a file system that is currently not mounted (for example, because it has the noauto option set in /etc/fstab).
Here is the /etc/fstab :
Quote:
I don't see a noauto option. Is it hiding somewhere?
Also, if I say the following then it seems that /dev/sda3 is ext2 and not ext3 (as YaST says).
Quote:
Firstly, how do I specify /dev/sda3 to be mounted by default (because I thought it would unless there is a noauto specified), and secondly, why is YaST not showing the same settings as when I say "mount" ?
First off I'm new to the openSUSE community and would just like to say So, to the issue at hand. I recently switched to openSUSE 11.4 from Debian. I noticed the setup didn't have an option encrypt the home folder like it does in Debian, so not being aware of any other way to encrypt it, I created a new partition, backed up my current home directory, created a new partition and mounted it as home before copying in the contents of the backup to the encrypted home partition I created. Now of course it is askingme to put the crypto password in at each boot, which isn't ideal because it's a family machine and no-one would remember the password but me. Is there any way of being able to automount the encrypted partition without having to put the key in every time? Or better yet an encrypted home folder that doesn't require the key to be put in on each login (as in Debian) without even using a dedicated partition.
My Lucid LTS Ubuntu Studio 64 (amd) won't boot anymore; / and /home each are software raid 0 partitions.
I have a Multimedia partition (also ext 4) which I attempted to chmod with a GUI program (I forget what its called now) to enable all users read/write access. Looks like I inadvertantly fstabed that partition to be mounted at boot-time (normally my password was required in order to mount it).
I tried to logging out and back into my OS to see if the partition was now writable but it wasen't; instead a filesystem error was noted. I realised then that my partition was IMPROPERLY labelled and I was in a tired state and didn't remember how to rename it & rebooted to make sure all was ok. But it was not:
An error occured when mounting /media/Ubuntu unknown filesystem type "Multimedia" mountall: mount /media/Ubuntu [1334] terminated with status 32 mountall: filesystem could not be mounted /media/Ubuntu Boot: recovering journal
From my generic Ubuntu system on a non raid partition, I finally removed the space in the 'offending' partition: Ubuntu Multimedia to UbuntuMultimedia. And I changed the permissions for it. But if I try to boot Ubuntu Studio via recovery; booting in low res is unusable, and it gets stuck if I SKIP mounting. So I am left with manual boot or drop to a shell. I will have to use an editor like vi or nano and the command prompt. I know that I likely only have to comment out a line in /etc/fstab but I am only familiar with nautilus or gedit for this type of operation. And since this OS is on a raid partition its not 'seen' on the live CD..I would need someone to offer me clear steps to follow with the non gui editors otherwise I'm in trouble... I just wanted to use that partition for video editing and now I am locked out of my system!
i recently deleted a NTFS partition while ubuntu was running and didnt disable the automount and when i tried to restart from what i can see it is trying to mount the partition which does not exist. When booting it says something to the effect of mounting dev/sda5 (which is now ubuntu) NTFS signature incorrect, what file must i change to allow ubuntu to boot because i kind of dont want to reinstall ubuntu and reconfigure it.
I have a specific NTFS partition on a USB drive that I wish to enable execute support for. The only way I've found to do this is to add the partition in /etc/fstab with a umask. This poses some problems:
1. Only root can mount it, making it a pain to mount (open terminal, `sudo mount (path from /etc/fstab)`, enter password, close terminal). 2. The system will hang at start if the UUID is unavailable (or, the external disk is unplugged). I run several servers from my machine, so if I do a remote restart it will not come back up because of the hang.
Is there a way to specify to FUSE (which I believe is the handler for auto-mounting in Nautilus) that this partition should have execute access to files?
There seems to be no documentation on how to automount partitions and USB devices under systemd in Jessie. (Overall, systemd entirely lacks any useful documentation or GUI configuration tools -- all very cryptic and hidden.)
I created custom files to enable automounting. I put them in /etc/systemd/system -- this may not be the right place, but it works.
Kernel note: This does not work under the old Wheezy kernel linux-image-3.2.0-4.
To automount my Windows partition so I can access its files, I created: /etc/systemd/system/media-windows.mount
The name of the file must match the mount point -- in this case, /media/windows
My file notes the device and file type, plus an fmask option so all the Windows files don't seem to be executable:
[Unit] Description = windows mount to /media/windows [Mount] What=/dev/sda1 Where=/media/windows Type=ntfs-3g Options=fmask=111 [Install] WantedBy=multi-user.target
The file ownership must be root.root. Apparently it doesn't need to be executable.
After creating, enable with:
sudo systemctl enable media-windows.mount
and it will mount on the next boot.
I read elsewhere that the before running the enable command you should run a start command:
My Lucid LTS Ubuntu Studio 64 (amd) won't boot anymore; / and /home each are software raid 0 partitions.
I have a Multimedia partition (also ext 4) which I attempted to chmod with a GUI program (I forget what its called now) to enable all users read/write access. Looks like I inadvertently fstabed that partition to be mounted at boot-time (normally my password was required in order to mount it).
I tried to logging out and back into my OS to see if the partition was now writable but it wasen't; instead a filesystem error was noted. I realised then that my partition was IMPROPERLY labelled and I was in a tired state and didn't remember how to rename it & rebooted to make sure all was ok. But it was not:
An error occured when mounting /media/Ubuntu unknown filesystem type "Multimedia"
Boot: recovering journal
From my generic Ubuntu system on a non raid partition, I finally removed the space in the 'offending' partition: Ubuntu Multimedia to UbuntuMultimedia. And I changed the permissions for it.
But if I try to boot Ubuntu Studio via recovery; booting in low res is unusable, and it gets stuck if I SKIP mounting. So I am left with manual boot or drop to a shell. I will have to use an editor like vi or nano and the command prompt. I know that I likely only have to comment out a line in etc/fstab but I am only familiar with nautilus or gedit for this type of operation. And since this OS is on a raid partition its not 'seen' on the live CD....
I would need someone to offer me clear steps to follow with the non gui editors otherwise I'm in trouble...
I just wanted to use that partition for video editing and now I am locked out of my system!
I configured "removable devices" in system settings as follows:
checked "Enable automatic mounting of removable media"
and
checked "Automatically mount removable media when attached"
Now following reason you would expect when you put a CD/DVD in the CD/DVD player it would be automatically mounted in directory /media/ yes?
But no - you first HAVE to open the CD or DVD with a program (like a file manager) before the directory and its content appears in directory /media/. This is not expected and very annoying.
Why does the configuration screen not work as expected. Are all settings just being ignored or something? If so - then why are those settings there in the first place? Or did I simply done something wrong?
I just want a CD or DVD been automatically mounted when I put it in the player, so I can access it without first having to open it in a separate program.
I managed with fstab but at restart came a black screen.I have called an HD '7200' then I reinstalled Fedora. And it does not automount it anymore. I changed fstab and black screen.
just a quick question: I have an external HD with 2 partitions, one ext3 and one FAT32.When I plug in the HD both partitions get automatically mounted, but as I only use I use the FAT32 partition to transfer data from/to Windows machines (which does not happen so often) I would like only the ext3 partition to be mounted automatically.
I think), and when I inserted a mo-disk in the drive, it automatically mounted and turned up as /media/disk. I then did an update (all) an now I am on core 2.6.31-12. The mo-disk will not automount any longer. Inserting a USB stick or a DVD still works fine, but I have to manually mount the mo. I have a feeling that it might be security related, but I am not sure.
lshal shows the following when I insert the disk: 10:08:38.309: storage_model_SMO_F551 property storage.removable.media_available = true 10:08:38.325: storage_model_SMO_F551 property storage.partitioning_scheme = 'mbr'
I enjoy the way Gnome automounts devices, such as cameras, thumb drives, and my iphone but it doesn't seem to mount the device in a conventional way that can be accessed by a path in a command prompt.Automounted devices can be configured to Do 'X' every time it is connected (you knew that) which includes specifying a command. I want to rsync the contents of the picture folder every time I drop it in the cradle, but retain the automount that gnome uses.The path used in Nautilus is : gphoto2://[usb:001,008]/DCIM/100APPLEBut that doesn't seem to be useful to me, at least as far as I can see.
After searching the boards, I dug through the udev man pages and rule files looking for a way to modify the default automount options for USB flash drives. Apparently, the options are somewhere else. Is there a simple way to add noatime to the default mount options?
Currently, the flash drive is automounted as follows:
I'm using Fedora 12, beta RC 2 in case that makes a difference.
I have two USB drives, one with ext3, and the other w/vfat. On my new Fedora 12 installation, GNOME properly automounts the vfat drive on insertion. However, it applies a wrong command to mount the ext3 one. The end result is that the ext3 drive appears in /etc/mtab but, unlike vfat, is inaccessible to non-power user.
The mtab is: /dev/sdb1 /media/918fb656-8efc-43b5-bdfd-0bd8004deeba ext3 rw,nosuid,nodev,uhelper=devkit 0 0 /dev/sdb1 /media/49C6-1901 vfat rw,nosuid,nodev,uhelper=devkit,uid=500,gid=500,sho rtname=mixed,dmask=0077,utf8=1,flush 0 0
Somehow GNOME misses the uid=500,gid=500,shortname=mixed,dmask=0077,utf8=1, flush portion of the mount command when mounting the ext3 drive.
It seems as though k3b will only recognise my burners when the system first boots for about 5 minutes. Once time is up k3b will not see my burners.. I tried burning a disk using k3b soon as I booted and it lost the drives mid burn.
The drives are ide and I've read about the drivers for cdrdao possibly not being correct but when I check to see if cdrdao sees the drives using command line it does give me both drives. So I assume that is working properly. When a cd is inserted it doesn't automount the cd either. Am I having issues with HAL? or is k3b just that flaky? ISB thumb drives mount fine..I have checked the fstab and there is no mention of cdrom mount points. IS this normal with the newer versions? Is this possibly my issue.. I was under the impression that with HAL the mount points are for ease of use in the fstab.. (not that you could mount a blank cd anyway...)
I recently upgraded to Fedora 11 because an update broke my X server. In Fedora 10 ntfs-3g automounted all of my devices in gnome but now it doesn't. Is there a way to fix this, other than editing /etc/fstab with a line for every partition?
With the GNOME desktop environment, when I plug in my iPhone, Nautilus automatically mounts it and I can browse and download my photos from it, as though the iPhone were a digital camera. Also the F-Spot auto-run dialog pops up asking if I want to import photos from the iPhone.In XFCE though, plugging in the iPhone doesn't do anything at all, except begin charging the phone. No auto-mounting is done in XFCE, no auto-run dialogs, nothing.
What is different here? Is it possible to get XFCE to auto-mount them? I thought XFCE uses GVFS like GNOME does? This is Fedora 12, by the way, with XFCE 4.6.To be sure it isn't just that XFCE doesn't mount digital camera type devices, I tested it with an actual digital camera that plugs in via USB. Once I connect it to the computer, it auto-mounts, I get a run dialog to import photos and I can browse the photos in Thunar just like I could with Nautilus.So it seems as though the iPhone sort of looks like a digital camera enough that GNOME mounts it as one, but it's just different enough that XFCE doesn't mount it at all.---------- Post added at 01:25 PM CST ---------- Previous post was at 12:03 PM CST ----------Apparently if I run F-Spot manually and go to import photos, it lets me select "Apple iPhone" or something from a source menu and then can import the photos that wa
