I have this problem and the workstation is on windows 7 and the domain is on samba. My Xp computers are connecting fine just the windows 7 ones.i've even tried to do the registry edit and its not working.
View 2 RepliesMy server is running Ubuntu. I have no problem adding a windows XP to the domain. I however have a problem with windows 7 laptop. I keep getting the following error
"The user could not be added because the following error has occurred:
The trust relationship between this workstation and the primary domain failed".
i already put a windows 7 in domain, but now i cant login with samba user in windows 7 machine, i recive the error: problem with trust relationship.
View 1 Replies View Relatedusing samba-3.4.5.I am trying for join samba server[on linux] to domain controller[windows2003], with security=domain in smb.conf. net rpc join -U Administrator%MyPassword But it fails with following debug messages.
rpccli_netlogon_set_trust_password: unable to setup creds (NT_STATUS_ACCESS_DENIED) !
rpc command function failed ! (NT_STATUS_ACCESS_DENIED)
get_schannel_session_key: could not fetch trust account password for domain 'MYDOMAIN'
net_rpc_join_ok: failed to get schannel session key for server MYSERVER for domain MYDOMAIN. Error was NT_STATUS_CANT_ACCESS_DOMAIN_INFO.
unable to join domain MYDOMAIN
return code = -1.
I have a truly freakish thing happening here. First I'll start with a general map:
Workstation A (10.10.0.100) - Ubuntu 10.10 joined to mydomain.local via likewise-open
Workstation B (10.10.0.101) - Ubuntu 10.10 joined to mydomain.local via likewise-open
Workstation C (10.10.0.102) - Ubuntu 10.10 NOT joined to any domain
Server A (10.10.0.1) - Windows 2003 AD Server on mydomain.local
Server B (10.20.0.1) - Ubuntu 10.10 joined to otherdomain.remote
As you can see I've successfully installed likewise and I've been able to get SUCCESS notifications from the join. I've been able to log in locally with a domain user and use a domain user password. I've also added a special Group in AD for linuxadmins and then added that to my /etc/sudoers file so I can sudo from a Domain Account. Great right? I'm slowly replacing Windows. But there's a hitch:
I can't SSH from machine to machine! but it's still not quite that simple.
I can SSH from Workstation A to Workstation C as a Domain User.
I can SSH(Putty) from Server A to Workstation A and B as a Domain User.
I can SSH from Server B to Workstation C as an alternate Domain User.
I can't SSH from Workstation A to Workstation B as a Domain User.
I can SSH from Workstation A to Workstation B as a Local User.
I can SSH from Workstation B to Workstation A as a Local User.
I can't SSH from Workstation B to Workstation A as a Domain User.
Complicated enough for you? The simple version is that if it's joined to the domain I can't ssh into another machine that's also joined to the domain while I'm a domain user. But give me a local account and it's as if there's not problem. I tried looking through the logs to find something but wasn't about to find a "sshd" type log. Syslog was completely unhelpful as it doesn't really show anything for the time stamps of my connections. Where does one start troubleshooting this?
I thought it might be a groups thing like the sudoers file, but I don't have an ssh or sshd group. Oh and what does SSH do? What's the error it throws?
Code:
MYDOMAINdomainadmin@workstationa:/$ ssh mydomain\domainadmin@workstationB
The authenticity of host 'WorkstationB (10.10.0.101)' can't be established.
RSA key fingerprint is OB:SC:UR:ED:FR:OM:YO:UF:OR:PR:IV:AC:YR:EA:LL:Y!.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added 'WorkstationB,10.10.0.101' (RSA) to the list of known hosts.
Here it waits for exactly 120 seconds and then...
Code:
Connection closed by 10.10.0.101
What can I do?
I ended up setting up a basic linux file server as a pdc for that office. Our main office is a windows 2000 ads domain. The two offices are connected with a vpn. I only have two users at the new location so I simply have the linux and samba usernames/passwords setup manually. I would like to know if it is possible to setup a domain trust between the two sites so I don't have to create a username/password in the remote site for every user at the main office to access. I did some searching but came up empty.
View 5 Replies View RelatedI joined a Debian 6.01 in our windows domain, now I try to unjoin it, however I do not know how to unjoin.
View 2 Replies View RelatedI have setup Ubuntu servers as LAMP machines but that's pretty much it.
I need to work on an existing CentOS server that I will see for the first time tomorrow. I am told that, as of right now, it is "just serving the internet." The goal is to set it up to be a primary domain controller by which I mean:
1) A user should be able to login to the server from any of the workstations and then see their server stored documents
2) The clients will be a mixed bag of Linux, Windows and Mac machines
I could use a push in the right direction as to what I need to do to get this all setup. I know how to setup users and home folders (I use webmin typically and I understand that there is a version for CentOS) but clearly there is more that I need to do. I am really curious as to how I would map the necessary drives on the client machines upon login and have the users have automatic access to their data regardless of the client machine they log in to.
We have a LAN with mixed Windows workstations win 2000, winxp, vista, win 7, linux servers all in a workgroup. Most applications used on the LAN are windows based, with a growing number of python apps. A friend suggested a Primary Domain Controller would be a better way to manage logins, resources etc. I don't wont to use a Windows based PDC, what would you suggest as a linux based PDC? I have heard about TURNKEY PDC, but it uses Samba 3 and apparently doesn't handle Active Directory in Windows.
View 5 Replies View RelatedI need to set up a domain controller that can communicate with windows machines as well as be accessable by the domain name and allow me to log in to the domain from my windows machines. i do have the novells guide to compTIA linux+ book but i cant figure out what i need to do to set up this server in the way i described above.
View 4 Replies View Relatedpoint me to a URL that would teach me the concepts of how I'd join an Ubuntu workstation to a Windows domain?
View 8 Replies View RelatedOn a Debian system, there are packages called uswsusp and hibernate. The former contains a program named s2disk, the latter contains a program called hibernate. Superficially, these both do the same thing: the suspend the machine to disk. Usually, this works fine, but since I'm often using Debian testing and there are lots of changes in kernel and other packages (I assume), somethings this breaks. But then, when one of these programs doesn't work, sometimes the other works. Often, hibernate works when s2disk doesn't.annoyingly, however, the "Suspend" or "Hibernate" buttons in the graphical user interfaces (e.g., LXDE, KDE) appear to be wired up to the s2disk program, so when that breaks I have to use hibernate manually.
So, what is the difference between these packages? Interestingly, the hibernate package "recommends" uswsusp, but the package description says that it "smartly puts your computer to sleep ... using one of the various methods available in the kernel". So apparently it can fall back to something else when the s2disk method fails? And if hibernate is more powerful, why wouldn't the GUIs use it instead?
I just found in kernel-2.6.35.3, in file arch/x86/kernel/irq.c:
unsigned int __irq_entry do_IRQ(struct pt_regs *regs)
{
struct pt_regs *old_regs = set_irq_regs(regs);
/* high bit used in ret_from_ code */
unsigned vector = ~regs->orig_ax;
[Code]...
Does any body know the relationship between the vector number and irq number?
I am running Red Hat Enterprise Server 6.0 I am having issues getting kerberos configured as a client to join a domain. Im getting below error message. "Failed to join domain: failed to connect to AD: KDC has no support for encryption type"
View 9 Replies View RelatedRecently,I am learnning about the LFS and I can not understand the relationship between the kernel and file system !!It is so annoyed because I want to understand the LFS deeply.who can describe the relationship between them!and who can give me a simple example?
View 1 Replies View RelatedI recently did a fresh install of squeeze. I have the stock 32 kernel along with the 34 from experimental (it is listed as stable by kernel.org). I installed version 195.36.24 of the Nvidia driver using the Nvidia installer, and after starting X the system became unresponsive.
grep '^(E' /var/log/Xorg.0.log
(EE) May 21 11:28:50 NVIDIA(0): Failed to allocate primary buffer: out of memory.
(EE) NVIDIA(0): *** Aborting ***
I find this strange considering that I have used this driver with no problem on a 33 kernel and the same video card:
01:00.0 VGA compatible controller [0300]: nVidia Corporation G72M [Quadro NVS 110M/GeForce Go 7300] [10de:01d7] (rev a1) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:1212]
Flags: bus master, fast devsel, latency 0, IRQ 16
[code]....
I believe it has 256MB of video memory, and I have 1GB of system memory. Is this just a problem with the 34 kernel?
I'm having a little trouble with ClamAV. Everytime someone sends me an email I get this error in my Webmin Mail Log. Now the mail works and it goes to the quarantine or to the user mail box but this error fills up my mail log and I'm assuming it is not using ClamAV virus definitions to scan the mail? How would I get rid of this error?
I checked in my /etc/clamd.conf and I have AllowSupplementaryGroups yes. What can be causing this error?
I am using ClamAV 0.96.1
Spamassassin 3.3.12
PostFix 2.3.3
CentOS 5.5
Jun 21 09:57:53 localhost amavis[10714]: (10714-03) ask_av (ClamAV-clamd) FAILED - unexpected result: /var/amavisd/tmp/amavis-20100621T090618-10714/parts:
lstat() failed: Permission denied. ERROR
Jun 21 09:57:53 localhost amavis[10714]: (10714-03) WARN: all primary virus scanners failed, considering backups
Jun 21 09:58:01 localhost amavis[10714]: (10714-03) SPAM, <lovelovedsert12@yahoo.com> -> <acruel@email.com>, Yes, hits=20.638 tag=6 tag2=7 kill=7
tests=DKIM_ADSP_CUSTOM_MED=0.001, DRUGS_ERECTILE=2.221, FORGED_YAHOO_RCVD=1.022, FREEMAIL_ENVFROM_END_DIGIT=2.223, FREEMAIL_FROM=0.001,
FREEMAIL_REPLYTO=2.775, FREEMAIL_REPLYTO_END_DIGIT=0.98, FSL_HELO_NON_FQDN_1=0.001, HELO_NO_DOMAIN=0.001, INVALID_DATE=0.432, MISSING_MID=0.14,
NML_ADSP_CUSTOM_MED=1.2, RCVD_IN_BRBL_LASTEXT=1.644, RCVD_IN_BSRN=2.5, RCVD_IN_RELAYS_ORDB=3, RDNS_NONE=1.274, TVD_RCVD_SINGLE=1.213,
T_TO_NO_BRKTS_FREEMAIL=0.01, quarantine spam-9665 (maia-spam-quarantine)
Jun 21 09:58:01 localhost amavis[10714]: (10714-03) Blocked SPAM, [212.96.9.34] [212.96.9.34] <lovelovedsert12@yahoo.com> -> <acruel@email.com>, Hits: 20.638, 8508ms
in my windows7 laptop, I installed a virtualbox 4.0 then Fedora 14 as OS. Can I transfer the files from Linux system to windows syatem? I mean can I create a relationship between two OS like mapping network drive?
View 3 Replies View RelatedHow to get my USB trust webcam working on Ubuntu 10.04.
View 4 Replies View RelatedI want to give Administrator privileges to Root user in Linux Domain Controller
View 12 Replies View RelatedOnce I setup winbind, samba, and krb5, and I attempt to join the machine to the domain, I get an error message as follows:
net ads join -U user@domain
Failed to join domain: failed to lookup DC info for domain 'XXX.COM' over rpc: Duplicate name on network.
How can I correct this?
I want to host 5 websites on my new virtual server so I have created 2 nameservers that point to my virtual server's IP addresses as a glue record. What confuses me is when I create a new domain on my server it gives the new domain it's own nameservers (ns1.thenewdomain.co.uk etc) do I need to change these records so they use the nameservers I created earlier? If I do? Which particular records should I change? I'm running a Unix virtual server with a Plesk control panel.
View 2 Replies View RelatedI would like to join SLES server to Microsoft Server 2008 Active Directory to enable domain authentication when accessing samba shares. When I run
Code:
net ads join -U administrator
I get the following error
Code:
"Failed to join domain: Improperly formed account name."
I tried the same samba configuration on another server (OpenSuse 11.2) without any problem, so I think it is somehow connected with the Samba version, but I'm not sure. Has anybody experienced this behaviour?
Code:
kinit administrator@MYDOMAIN
the package versions on SLES 10 SP2 (x86_64) are following
Code:
samba-3.0.28-0.5
samba-client-3.0.28-0.5
krb5-1.4.3-19.34
krb5-32bit-1.4.3-19.34
[code]....
I've setup my samba pdc with ldap, and I can see my shared files (public), which i think is an indication that my samba is working. But I can't seems to get my win2k8 machine to join my domain.
My domain admin is : root system admin: root password for both domain admin and system admin are the same The message that I get from Win2k8 when I try to join a domain is "The specified computer account could not be found. Contact an administrator to verify the account is in the domain. If the account has been deleted unjoin, reboot, and rejoin the domain"
[Code]...
Firstly I thought LWP value listed during execution of command ps -eLf is same as the TID value of each threads getting spawned.But actually these two values are totally different(got TID value using pthread_self()).Please let me know what is this LWP value?
View 1 Replies View RelatedCould you please explain the relationship between the languages?For one, is C writing assembly when you compile, does every piece of code end up assembly/hex? Is there a way to convert (?port?) between them?I don't understand much at all of them yet, but I've seen examples where it looks like they are interacting, and an understanding of all of them looks to be important?
View 12 Replies View RelatedI need a ERD tool (ERD -> Entity Relationship Diagram). Where and how i can get it?. If it is platform independiente, open source (or free), it will help me greatly.
View 14 Replies View RelatedI am looking for customer relationship management, I have had a look at "Sugarcrm" but cannot seem to figure out how to install it.I run a small business on my own which often means i get flooded with customers from time to time and i need a CRM system that is simple to use and doesnt have to be fancy..What I am asking is there a package out there for ubuntu other then Sugarcrm?Btw the software will be installed on a stand alone computer.
View 2 Replies View RelatedDo you know what's relationship between ethx and physical net cards? such as i have three net cards in the PC, named A, B, C. In which config file i could know that eth0 -> A, eth1 -> B, and eth2 -> C. Would the mapping relationship change after reboot? Is there any method i could change the mapping?
View 5 Replies View RelatedWhere to download VMware workstation for Linux for free?
View 1 Replies View Related