I know how to automount ntfs, what I don't know is how to automount a 2nd ext4 partition. I know I can use code...
What am I doing wrong? Also how can I read and write to and form the root of the partition with out opening it as root?
This is not the partition I have ubuntu installed on, this is a 2nd partition.
I installed Storage Device Manager and can't automount my Windows 7 partition. It doesn't show up in Storage Device Manager. When I mount the partition, it comes up as /media/286CC2A6397A0F2A instead of sda# like normal drives.
View 9 Replies View Relatedi recently deleted a NTFS partition while ubuntu was running and didnt disable the automount and when i tried to restart from what i can see it is trying to mount the partition which does not exist. When booting it says something to the effect of mounting dev/sda5 (which is now ubuntu) NTFS signature incorrect, what file must i change to allow ubuntu to boot because i kind of dont want to reinstall ubuntu and reconfigure it.
View 1 Replies View RelatedOn my computer for the last couple of years I have been running Ubuntu and Windows XP in a dual boot system. Due to some unsolvable problems in Ubuntu, I decided to try out Fedora. I created a third partition on my computer and into this partition I installed Fedora. Now when I boot my computer I can either run Fedora or Windows XP. Eventually, I plan to get rid of Ubuntu completely. But for now the Ubuntu partition is still on my hard disk; I can't boot up with Ubuntu anymore, and that's OK. I don't need to run Ubuntu, but I would like to be able to access the Ubuntu partition, since there are files there that I want to keep.
At least I want to be able to read and write to the files in Ubuntu. How can I automatically mount the Ubuntu partition so that I can work with its files from Fedora?
I'm pretty sure that to get the Ubuntu partition to mount, I need to enter some lines into the etc/fstab file. Does anyone know what I should enter into Fedora's etc/fstab file so that the Ubuntu partition will be mounted?
In my Ubuntu installation the partition is named DiskF, it is partitioned in the ext3 file system. In Fedora when I look at /media/DiskF, it is empty.
When I run [code] blkid in a terminal here is the output:
What are the commands that I need to put in /etc/fstab so that when I boot my computer in Fedora DiskF will be mounted?
My Lucid LTS Ubuntu Studio 64 (amd) won't boot anymore; / and /home each are software raid 0 partitions.
I have a Multimedia partition (also ext 4) which I attempted to chmod with a GUI program (I forget what its called now) to enable all users read/write access. Looks like I inadvertantly fstabed that partition to be mounted at boot-time (normally my password was required in order to mount it).
I tried to logging out and back into my OS to see if the partition was now writable but it wasen't; instead a filesystem error was noted. I realised then that my partition was IMPROPERLY labelled and I was in a tired state and didn't remember how to rename it & rebooted to make sure all was ok. But it was not:
An error occured when mounting /media/Ubuntu unknown filesystem type "Multimedia"
mountall: mount /media/Ubuntu [1334] terminated with status 32
mountall: filesystem could not be mounted /media/Ubuntu
Boot: recovering journal
From my generic Ubuntu system on a non raid partition, I finally removed the space in the 'offending' partition: Ubuntu Multimedia to UbuntuMultimedia. And I changed the permissions for it. But if I try to boot Ubuntu Studio via recovery; booting in low res is unusable, and it gets stuck if I SKIP mounting. So I am left with manual boot or drop to a shell. I will have to use an editor like vi or nano and the command prompt. I know that I likely only have to comment out a line in /etc/fstab but I am only familiar with nautilus or gedit for this type of operation. And since this OS is on a raid partition its not 'seen' on the live CD..I would need someone to offer me clear steps to follow with the non gui editors otherwise I'm in trouble... I just wanted to use that partition for video editing and now I am locked out of my system!
i recently deleted a NTFS partition while ubuntu was running and didnt disable the automount and when i tried to restart from what i can see it is trying to mount the partition which does not exist. When booting it says something to the effect of mounting dev/sda5 (which is now ubuntu) NTFS signature incorrect, what file must i change to allow ubuntu to boot because i kind of dont want to reinstall ubuntu and reconfigure it.
View 3 Replies View RelatedI recently installed Fedora 13 (the KDE spin). It detects correctly my other NTFS partitions and will mount them perfectly if I click on it using Dolphin.
I would like to mount one of them automatically after booting (or logging in, doesn't matter). My first idea - and supported by a coulple of Google searches and previous threads - was to put them on on /etc/fstab.
But to my complete surprise they aren't there. Where does Dolphin (or KDE) keeps information about partitions? How to set them to automount? Also, fstab refers to my linux partitions as UUIDs not the device names - how does this work?
What should I do to set a NTFS partition to automount on Fedora 13?
I have a specific NTFS partition on a USB drive that I wish to enable execute support for. The only way I've found to do this is to add the partition in /etc/fstab with a umask. This poses some problems:
1. Only root can mount it, making it a pain to mount (open terminal, `sudo mount (path from /etc/fstab)`, enter password, close terminal).
2. The system will hang at start if the UUID is unavailable (or, the external disk is unplugged). I run several servers from my machine, so if I do a remote restart it will not come back up because of the hang.
Is there a way to specify to FUSE (which I believe is the handler for auto-mounting in Nautilus) that this partition should have execute access to files?
I'm using Debian Squeeze XFCE along with Windows 7 as dual boot on my notebook. I want to access my Windows 7 partitions from Debian for both reading and writing. I was a Ubuntu user in which the Windows partitions were visible by default. I want to know how to mount the drives used by Windows 7 automatically on startup.
View 4 Replies View RelatedFor whatever reason /dev/sda3 (at /tydelik) does not mount itself (like all the other partitions) when the system reboots.
In YaST's expert partitioner it says that:
Quote:
An asterisk (*) after the mount point indicates a file system that is currently not mounted (for example, because it has the noauto option set in /etc/fstab).
Here is the /etc/fstab :
Quote:
I don't see a noauto option. Is it hiding somewhere?
Also, if I say the following then it seems that /dev/sda3 is ext2 and not ext3 (as YaST says).
Quote:
Firstly, how do I specify /dev/sda3 to be mounted by default (because I thought it would unless there is a noauto specified), and secondly, why is YaST not showing the same settings as when I say "mount" ?
My Lucid LTS Ubuntu Studio 64 (amd) won't boot anymore; / and /home each are software raid 0 partitions.
I have a Multimedia partition (also ext 4) which I attempted to chmod with a GUI program (I forget what its called now) to enable all users read/write access. Looks like I inadvertently fstabed that partition to be mounted at boot-time (normally my password was required in order to mount it).
I tried to logging out and back into my OS to see if the partition was now writable but it wasen't; instead a filesystem error was noted. I realised then that my partition was IMPROPERLY labelled and I was in a tired state and didn't remember how to rename it & rebooted to make sure all was ok. But it was not:
An error occured when mounting /media/Ubuntu unknown filesystem type "Multimedia"
Boot: recovering journal
From my generic Ubuntu system on a non raid partition, I finally removed the space in the 'offending' partition: Ubuntu Multimedia to UbuntuMultimedia. And I changed the permissions for it.
But if I try to boot Ubuntu Studio via recovery; booting in low res is unusable, and it gets stuck if I SKIP mounting. So I am left with manual boot or drop to a shell. I will have to use an editor like vi or nano and the command prompt. I know that I likely only have to comment out a line in etc/fstab but I am only familiar with nautilus or gedit for this type of operation. And since this OS is on a raid partition its not 'seen' on the live CD....
I would need someone to offer me clear steps to follow with the non gui editors otherwise I'm in trouble...
I just wanted to use that partition for video editing and now I am locked out of my system!
I have encrypted a partition while installing Fedora 13, and I need to disable its automount - I will mount those manually.
But even though I commented out the corresponding line in /etc/fstab, I am still asked for the passphrase for the partition at startup.
How to completely disable this behaviour - and how to mount the partition manually afterwards?
First off I'm new to the openSUSE community and would just like to say So, to the issue at hand. I recently switched to openSUSE 11.4 from Debian. I noticed the setup didn't have an option encrypt the home folder like it does in Debian, so not being aware of any other way to encrypt it, I created a new partition, backed up my current home directory, created a new partition and mounted it as home before copying in the contents of the backup to the encrypted home partition I created. Now of course it is askingme to put the crypto password in at each boot, which isn't ideal because it's a family machine and no-one would remember the password but me. Is there any way of being able to automount the encrypted partition without having to put the key in every time? Or better yet an encrypted home folder that doesn't require the key to be put in on each login (as in Debian) without even using a dedicated partition.
View 4 Replies View RelatedI'm trying to automount my encrypted Windows partition in Slackware-Current.
With help from the Gentoo wiki, I came up with this script:
Code:
Then I added this to my fstab:
Code:
I get this error when I try to mount my partition (as root):
Code:
Error: Unable to initialize gtk, is DISPLAY set properly?
But if I run my script like this (exactly how mount runs it), it works fine:
Code:
New script
Code:
There seems to be no documentation on how to automount partitions and USB devices under systemd in Jessie. (Overall, systemd entirely lacks any useful documentation or GUI configuration tools -- all very cryptic and hidden.)
I created custom files to enable automounting. I put them in /etc/systemd/system -- this may not be the right place, but it works.
Kernel note:
This does not work under the old Wheezy kernel linux-image-3.2.0-4.
To automount my Windows partition so I can access its files, I created:
/etc/systemd/system/media-windows.mount
The name of the file must match the mount point -- in this case, /media/windows
My file notes the device and file type, plus an fmask option so all the Windows files don't seem to be executable:
[Unit]
Description = windows mount to /media/windows
[Mount]
What=/dev/sda1
Where=/media/windows
Type=ntfs-3g
Options=fmask=111
[Install]
WantedBy=multi-user.target
The file ownership must be root.root. Apparently it doesn't need to be executable.
After creating, enable with:
sudo systemctl enable media-windows.mount
and it will mount on the next boot.
I read elsewhere that the before running the enable command you should run a start command:
sudo systemctl start media-windows.mount
but that didn't work for me.
After a new Fedora 12 installation, i cannot automount my Windows partition. My system is setup originally at windows XP ,partitioned, then change to Fedora 10. Change to Fedora 11 through update.System very slow.
I decided to upgrade to fedora 12 by DVD installer, then i have to mount manually to access my back-up, when typing su -c '/sbin/fdisk -l' at terminal, this is the code:
I have a problem that I can not decide for 2 weeks. Here is what happened: On my laptop, installed just Windows XP. In the past, when I installed the second system, Ubuntu 9.04 or 9.10 (for dual-boot), Ubuntu asked the administrator password for access to just Windows XP partition. I mean, that just Windows XP partitions were visible, but for the entrance (mount) needed a root password.
Now, in Ubuntu 10.04, Windows XP partition mount automatically and Ubuntu does not require the root password. I do not like it very much.
Tell me please, what do the settings at the time of installation of Ubuntu for just Windows XP that the system would be asking root password for just Windows XP partitions? Is this possible? I think - yes. Because in the past the default 9.04 and 9.10 asked for a password.
PS: I must say, as I put Ubuntu and just Windows: 1. Be installed just Windows XP, giving it 20 GB space 100 GB hard drive. </span>The remaining 80 Gigabytes leave out the implications.
[Code]...
Suffice it to say, I'm an idjit and can't figure out how to get my USB drives to automount.
View 9 Replies View Relatedtoday when I inserted my usbpen in the laptop, automount did not work. I tried another pen with same result. I checked with mountmanager and both pens were working and actually mounted them manually, but automount which worked perfectly yesterday now is dead.I found a workaround installing usbmount from standard repository and now automount works again but usbpens are mounted in /MEDIA/usbx instead with their names as before and I have to open a root terminal tu unmount.
Unfortunately I use a pen for backup with unison and changing the mount position I have to modify unison profile every time, which is pretty uncomfortable.The problem May arise from the fact thgat yesterday I tried to manually compile and install the canon driver for my printer and trying to solve dependencies I had to compile and install Glib-2.26 pango-1.28.3 and gtk+2.22 from their sources.I did not manage to get a working canon driver but i may have made a mess with usb automount function.program/service is responsible for usb automount in ubuntu 10.10 so that i can reinstall or reconfigure it.
My goal is to prevent gnome from mounting and opening up a file browser when any device is plugged in (USB, CD/DVD) for a Desktop User account. I am using Ubuntu 10.04 Netbook RemixI modified several settings in Nautilus (Edit --> Preferences --> Media (tab). I Selected "Never prompt or start programs on media insertion" and unchecked "Browse media when inserted".I restarted the system, but when I plug in a USB mass storage device the file browser window still appears and the device is mounted.I dug down into gconf and found the following registry keys that I believe are of interest:
/apps/nautilus/preferences/media_automount (unchecked)
/apps/nautilus/preferences/media_automount_open (unchecked)
/apps/nautilus/preferences/media_autorun_never (checked)
Has anybody run into this problem and found a solution? Modifying the keys I mentioned above worked for everyone else that has asked the "disable automounting" question (that I've found). Some very old posts mentioned gnome-volume-manager, but it is not installed on my system.
EDIT:This seems to only happen when the Netbook Launcher is started. If Netbook Launcher is removed from the list of startup programs and the system is restarted, I can insert devices without getting a pop-up window and without the device being mounted.
I cannot force Ubuntu to open my data DVDs upon their insertion. It is present, but it won't automount. Of course, in /etc/fstab are no indications for removabledevices, but this is correct, I think.
View 5 Replies View RelatedI installed Debian stable and I see these errors in the xsession error file
/etc/gdm3/Xsession: Beginning session setup...
GNOMEKEYRINGCONTROL=/tmp/keyring-j0E6Br
SSHAUTHSOCK=/tmp/keyring-j0E6Br/ssh
GNOMEKEYRINGCONTROL=/tmp/keyring-j0E6Br
[code]....
I bought myself an inexpensive USB mp3 player the other day, thinking that I could sync it just like I do my digital camera and thumb drives. No such luck.
The player is identified by 'lsusb -vv' as follows:
Quote:
Bus 001 Device 005: ID 10d6:1101 Actions Semiconductor Co., Ltd
Device Descriptor:
bLength 18
bDescriptorType 1
[Code].....
Ubuntu v9.10 I have a damaged HDD which I want to clone using ddrescue. I want to attach it via USB connection, otherwise Linux hangs on startup. I don't want the O/S to attempt to mount the drive.I would be happy to disable mounting of all external USB drives.How can I achieve this?
View 7 Replies View RelatedI have a hard drive that doesn't auto mount when the computer boots up.You have to do it manually.How do I get it to start up along with the external usb hard drives?
View 3 Replies View RelatedI run ubuntu 9.10, and my wife runs winxp. I am trying to setup an automount of her storage (D) drive in my fstab. here is the line in fstab:
The share mounts with no errors, but when i go into palces and view the share, it is blank, totally empty. I can create and delete documents here, but the next time I open the share, i cant see anything. If i connect to the share using places>connect to server, everything is fine. If i connect using places, network, and browse to her machine, it works just fine.
Today i did a fresh install of karmic, installed smbfs, added the above line to fstab, same issue. I have searced and searched but I haven't found a problem exactly like this. This setup has been working fine until sometime recently. I cant be sure exactly when it stopped working, or why. The reason I need it to automount is I have several applications that point to that drive. It is worth noting i have tried several variations on the line in fstab, all with the same results.
how do i set additional partitions to automount on startup ie. so id don't get prompted for a password?one other thing, how do you switch off the 60 second pause when shutting down
View 3 Replies View RelatedHow to automount internal drives. I have 2 other partitions other than the boot one. I want both the other partitions to mount at startup without asking me the password.
View 9 Replies View RelatedThis computer is a little netbook that I haul around with me. it's running ubuntu 9.10. In the office, I have a NAS networked on a Windows network. I can access the filesystem in Nautilus using Samba. I'm connecting to the network wirelessly, at wlan0.The folder I want to access shows in Nautilus as
smb://diskstation/storage%20central/
And in Terminal it shows as:
Code:
jackelliott@TheJackUbuntuNetbook:~$ ls .gvfs
storage central on diskstation
How can I set ubuntu up so that when it has connected to the office network it also automounts that Windows share?
I just upgraded to Mythbuntu 10.04 (no fresh installation) and I don't know why but my external eSata drive is no more automatically mounted.The XFCE4 config is set to automount hotpluggable and external drives but nothing happens.The eSata drive is neither automounted when switched on before booting nor when switched on while the system is running.I'm not sure, but it's possible that it worked once or twice after the upgrade. Now, it's dead - I have to mount it all manually.With 9.10 it worked like charm.It's our HTPC and my wife is already making jokes again about her nerd-husband always needing to upgrade a perfectly running system.
View 3 Replies View Related