I have a service, which calls other services. I need to verify that my service is hitting the right end points of the other service, since the end points of the other dependent service are specified in configs, and are different for different stages - development vs production. Is there any tool which can tell me what end points are being contacted from my host?
View 1 RepliesI have a small office network with windows machines and a Linux Internet access server (CentOS 5.4). For Internet access I use masquerade, so everione can access every Internet service.
I periodicali have quite big traffic from one of the hosts, but I can't figure out which one is that?
Is there any linux command which will show me the bytes/packets (or any useful infos) going to specific hosts?
I have install zabbix_agent on zabbix_server, I can connect to the zabbox server from the server itself, but can't connect from other machine.
what are the steps of adding new client, I did following:
1- configure /etc/zabbix/zabbix_agent..conf, add following code...
How can i add the host on to the ZABBIX web interface?
Under Configuration->Hosts I have added the host but I don't see any report, I am no sure if server is able to see agent?
I have a UBUNTU server 10.04 LTS with 3 network interfaces (eth0,1,2) with eth0 is connected to my lan and others connected to two different ISPs , I am looking for a very flexible and complete monitoring tool which can monitor all of the traffic of incoming and outgoing of any interface and SPECIALLY can show me which local client made connection to which interface for connecting to internet in online mode not offline and it is good to have online web base interface I mean the interface shows the measured data in real time mode. I fount some tools like iftop and iptraf and many others in this url: http://www.ubuntugeek.com/bandwidth-...for-linux.html but non of them are suitable for my net I mean none of them have good web real time data and non of them shows "which local client made connection to which interface for connecting to internet".
View 2 Replies View RelatedI am using CentOS 5.4 and did a yum install of cacti. I installed all the necessay packages, like net-snmp, php net snmp and all that. Everything else works but I can't for the life figure out how to monitor traffic on eth0. I do not have any SNMP Interface Statistics or alike in either the Associated Graph Templates or Associated Data Queries.
Heres the output of "snmpwalk localhost -c public -v2c" , SNMPv2-MIB::sysDescr.0 = STRING: Linux xxx.xxxx.net 2.6.18-164.6.1.el5xen #1 SMP Tue Nov 3 17:53:47 EST 2009 i686
SNMPv2-MIB::sysObjectID.0 = OID: NET-SNMP-MIB::netSnmpAgentOIDs.10
DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (7515443) 20:52:34.43
[Code]...
I am trying to monitor the interfaces on the local computer only.
my servers are configured with:Ubuntu 10.10 server 64bit;Lighttpd MySQL-Server I need to make graphs for traffic (bandwidth usage) and cpu load every month. I tried to configure mrtg but after 48h, it didn't produce graphs.(I can't install apache2)
[Code]...
Which is best server monitoring (Traffic ) tool ?
Can you provide some form of monitoring on this server or recommend any server-side applications that could monitor the status, in high detail, including traffic, etc?
Is there a program that monitors and displays 'who' is on your wireless Internet signal that one may not be aware of? Like, the ability to see when someone that you don't know is accessing your locked wireless?
View 9 Replies View RelatedI want to know that squid in 5 min ago and 1 hour ago how much traffic transferred for monitoring purposes?? where can I get this info from running squid? of course I get I have to note that access.log is disabled for some reasons.
View 3 Replies View RelatedI was reading a magazine article today which was a discussion of internet detective work for tracking down ip addresses which attempt an ssh login to your machine. I have never really paid much attention to network security since I only run a small home network. I have WPA encryption and a firewall on my router. But while reading this article, I remembered that I myself has seen log files in the past that inidicated someone somewhere had attempted to log into my machine (attempts all failed). This had happened a few times, but I never really considered it a threat.
But, the more I read about home computers becoming "zombies" for criminals, I guess I am getting a little paranoid in my old age, particularly since my wife does quite a bit of business on the net with credit cards. I have four computers connected to the net and each other on this network, and would like to be able to easily detect attempted log ins and deal with them quickly.
So my reason for posting is to ask if someone could recommend a novice-friendly application for monitoring traffic to check this intermittently. I have read bodhi.zazen's excellent tutorial on snort, but I it appears to be written for large lan's or web servers and is over-kill for a small home network.
I have an log monitoring application that is listening on port 514 to receive events only from certain hosts.In order to control this,I've tried set up iptables to define those hosts that are allowed to this application. Here is an example of the script that contain the commands:
iptables.sh -> Code: iptables -I INPUT -p tcp -s 192.168.0.10/24 --dport 514 -j ACCEPT
iptables -I INPUT -p tcp -s 192.168.0.15/24 --dport 514 -j ACCEPT
...
[code]....
I've read up some of the posts on this forum, but can't seem to find an answer. I have a web service within an Apache Tomcat instance installed on a Redhat linux server. I only have shell access to the server, and need to monitor outbound network traffic from my web service. Is there a unix command that will allow me to monitor all outbound traffic? I'm thinking fiddler, but a unix version? I've heard of things like ntop and iptraf, but I don't think those will help me in this instance.
View 2 Replies View RelatedI'm looking for a monitoring tool like ntop, but can preserve statistics for http traffic.
View 1 Replies View RelatedI'm running ASSP on Ubuntu 10.04.1 it's mostly working fine. I have one problem which has been bugging me for some time. I don't want to filter outbound mail, but if I can relay (proxy) my outbound mail through ASSP, then it can automatically add to the whitelist.
As ASSP is a proxy, I need a server to send it to once ASSP receives it. I've tried my ISP, but this failed and they weren't willing to confirm if a connection attempt was received at their end.
Current setup
Inbound
mx -> router -> ASSP -> Exchange 2003
Outbound
Exchange 2003 -> mx
I'd like to setup outbound as either
Exchange 2003 -> ASSP -> <ISP> SMTP relay
Exchange 2003 -> ASSP -> <relay running on Ubuntu eg postfix>
Can anyone help me with troubleshooting steps or a better suggestion for how I can set this up. I'd love to know why my ISP setup didn't work, but I don't know a tool for monitoring IP traffic in Ubuntu SE, in windows I use Wireshark is there any equivalent I can setup for Ubuntu or a tool I can use in windows which will show all traffic, Ubuntu and windows server are on the same netgear switch, not sure it's smart enough to copy all traffic to another port for monitoring.
Recently I notice that when I'm connected to an vpn server (pptpd) and I'm using it as a default gateway my download and upload speed decreases almost to the half of the usual speed. I made a test using iptables in order to count how much GRE packets are generated (except the real traffic itself) in that way:
Code:
iptables -I INPUT -p gre -j ACCEPT
iptables -I OUTPUT -p gre -j ACCEPT
iptables -I FORWARD -s 172.16.10.101 -j ACCEPT
iptables -I FORWARD -d 172.16.10.101 -j ACCEPT
The first 2 rules match all GRE packets between the pptpd server and client, and the next rules - the traffic between the server and the client.
When I turn the counters to zero and begin to generate traffic (to browse, to download etc.) I see that the GRE packets are even more than these in the FORWARD chain.
So, my question is first of all is my test correct and is it true that so much gre traffic is being generated during the browsing (it becames clear that the traffic is double than if the pptpd wasn't used as a gateway) and if yes - can that traffic be reduced?
I'm trying to use ssh-keyscan to get some known_host file population going on, but I have a ton of hosts I want to scan, all with multiple aliases in /etc/hosts. Is there a way to use my current /etc/hosts file to do an ssh-keyscan instead of making a special list of hosts that (from what I've read) ssh-keyscan needs?
View 2 Replies View RelatedWell, as many proxy applications, GNOME Network Proxy Preferences only allow to ignore hosts. What I want to do is exactly the opposite. I only want to use the proxy for few sites. Is it possible to define only the allowed hosts in any way?
PS: I know FoxyProxy add-on for Firefox does this, but 1)I don't use Firefox and 2)I want the proxy settings system wide not only for browser.
Probably an easy (which means stoopid) question...I am trying to reroute a website using my hosts file so that it matches my servers certificate file for testing without effect dns and the live site.When I went to edit my /etc/hosts file it is non-existent. I have, I am assuming in it's place, hosts.allow and hosts.deny. Can anyone explain why I do not have a hosts file?
View 1 Replies View RelatedWe have something on our network that is reaking havoc with our content filter. I am trying to track it down, but so far I have been unsuccessful. We have approximately 500 devices in 100+ different locations spread across 9 states. Looking at each computer is not really feasible.
I need a machine that can sit in between our network and our internet connection and graphically monitor in real time and logs how much traffic each device is sending and receiving. It would need to sit inline so it has to have two nics and be able to pass traffic. The machine also needs to be transparent. Reconfiguration of our routers or workstations is not an option.
I have used ethereal and wireshark before. Ethereal may be a viable option, but wireshark seems to provide lots of information, but no practical way to make use of it. how to set up the box to be a transparent device on the network that will allow internet bound traffic to flow (freely)?
I need to set up my centOS computer as a firewall in my home network. Ive got 2 interfaces, eth0 and eth1. I want to allow and forward all traffic on eth0 and block all traffic on eth1 except ssh, ping(icmp) and DNS. How do I do this? Ive tried some editing in /etc/sysconfig/iptables but no luck.
View 1 Replies View Related[Code]....
What I want: multiple virtual hosts with ssl and only 1 ip address: In my example: server = 192.168.227.129
[Code]....
I wanted to tell my server to block all traffic but US only traffic. So i followed this guide:[URL].. Now I know, it's the best way to help prevent hackers/crackers (doesn't matter to me what they are called. I just have to stop them). My server only deals with US clients anyways so might as well just start right there for my server's security before getting into the brute force and injection preventions. So I got it all done compiled everything moved to the proper directory. I then started to setup my iptables. Like so
Code: iptables -F INPUT
iptables -F OUTPUT
iptables -I INPUT 1 -s *.*.*.* -p tcp --dport 22 -j ACCEPT
iptables -I INPUT 2 -s *.*.*.* -p tcp -j ACCEPT
[Code]...
After seeing that i went digging in the code and figured it was something todo with memory allocation.
My problem is the following : I have a certain Internet connection for a certain network. So many people are sharing this network. What i need is a software on Linux (preferably Ubuntu) that will enable me to monitor the bandwidth usage PER IP Like : ip x.x.x.x using 20Kb upload 200Kb download , connected to this site for example.. The main goal is to know from which IP is the high Upload traffic or download traffic is coming , because i have a certain quota and I'm always getting over the quota (in upload and download) and end up paying extra for the ISP , so i would need to know who is using lots of upload/download bandwidth .
View 6 Replies View RelatedI am renting a VPS from[URL].They do not supply a webhosting panel for restarting/shutting down or for seeing monthly bandwidth consumtion. I am running CentOS 5.3. I was wondering if theres any programs that you can install to view monthly/daily bandwidth consumption on our server?
View 2 Replies View RelatedI want to monitor RDS (mysql database of EC2) using Nagios. In command line ( I am able to do it but I dont know how to feed it in nagios . On nagios server if I execute the following command , I am able to fetch the information of database (RDS)
Nagios_server #/usr/local/nagios/libexec/check_mysqld.pl -p<password> -f -u <username> -A uptime,threads_connected,slow_queries,open_tables -H <hostname> -q 'SHOW STATUS'
output :- MYSQL 5.1.50 OK | uptime=344783 threads_connected=672 slow_queries=0 open_tables=64
Note :- Here the host name is public dns name (x.y.z.amazon.com) .We cant ping to this host.With mysql command , we can log in and work on databases.
I was looking for some software to run on my Debian vServer which monitors RAM, CPU and HDD usage. This tool should not require Gnome/KDE, so I guess I'll end up with a PHP tool. I did some search but came up with nothing. I'm using Parallels Power Panel (there might be a plugin or something like that?)
View 5 Replies View RelatedFor windows servers, we use System Monitor to monitor everything on the server from disk utilization, current connections, application pools in IIS, CPU performance, bandwidth, and others. Is there something like that for opensuse? My server is running apache and I want to be able to monitor the linux server in a similar way that I do Windows Server 2003. Preferably I'd like an app that will run from a win32 workstation.
View 5 Replies View RelatedI'm searching for something like crontab. but the action should not be executed at a specific time but after a file or directory change. I'd like to run some scripts as soon a new file is in a predefined directory.
A daemon / shellscript would be really great. Does anybody know something like that?
I have some web pages that I need to frequently check. Is there any tool that will check for updates and send notifications by mail or RSS. These pages are not RSS supported.
I am looking for a Linux standalone application, browser extension, or a service that sends mails.
what I can use in Ubuntu for monitoring CPU core temps, CPU and memory speed and such, used CPU-Z, prime, HD tune up and and the like when OC'ing and UC'ing my Windows PC's but what Ubuntu equivalents are there?
View 9 Replies View Related