I have try to startup jboss on linux, but it does not work,the jdk is installed and Tomcat is okay
/etc/profile
export JAVA_HOME=/usr/java/jdk1.6.0
export TOMCAT_HOME=/usr/apache-tomcat-6.0.18
[code]...
I have apache ,jboss and jon instances on various linux boxes.I need to create a generic startup script to restart those instances on server reboot.The script requirement is :It should take the name of instances from one text file named active-servers and recycle those instances.1. start-mws-servers (generic script for /etc/rc.d but just create it in ~/bin dir for current testing)It simply searches ~/bin/active-servers for active server recycle scriptsIt executes each recycle script and passes it the 'start' commandIt logs results to /tmp/start-mws-servers.
View 1 Replies View RelatedMy 9.10 desktop failed in startup, first it stopped in NTP, and in recovery it stops at Starting Samba daemon. I tried the following:
1. Restart with alternative kernel, and recovery mode - didn't get to the desktop.
[Code]...
I have a problem in my Ubuntu box. The applications defined in "Startup applications" fail to start. On another user's account, everything works fine. I think that's some configuration problem. Where are the data of of the startup applications stored? (i suppose it's .xx file that I could just delete to restore defaults)
View 8 Replies View RelatedI am trying to install fedora10 on my desktop with 320gb HDD, Intel Dualcore, Biostar mother board, 1 GB RAM. I installed fedora many times, now my PC is connected to a SAMSUNG B2030 monitor which is of size 20.5 inches. This time, Anaconda is falling back to text mode as it cannot recognize the VGA. Monitor CD is along with me but it didnot contain any linux drivers. (Drivers for xp are installed). What is the solution? Should I switch to the latest fedora13?
View 5 Replies View RelatedI am getting avahi daemon failed message at startup and after that the screen keep flickering but no login screen appears. I have read somewhere at the Internet that the cause is full usage of /tmp. Further they advised to delete /tmp/X0-lock. I am using fedora9. Please tell me: 1. If deleting /tmp/X0-lock will be safe? 2. To do this, how can I access the command line when system is not starting up ?
View 4 Replies View RelatedI'm not very sure when this issue started. Anyway, the system finally boots and I haven't had any further problems, but I somehow notice the booting to be a bit slower since this error appeared and I don't like watching the red letters that say "failed" every time I switch the computer on. I googled this before posting it, and other users have had this issue, but the solutions that worked for them didn't work for me.
This is the content of my /etc/network/interfaces file:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
I have this kind of error:
Code: Select allr@prime:~$ systemctl status systemd-modules-load.service
● systemd-modules-load.service - Load Kernel Modules
Loaded: loaded (/lib/systemd/system/systemd-modules-load.service; static)
Active: failed (Result: exit-code) since Чтв 2015-08-20 08:07:38 EEST; 13min ago
Docs: man:systemd-modules-load.service(8)
man:modules-load.d(5)
Process: 150 ExecStart=/lib/systemd/systemd-modules-load (code=exited, status=1/FAILURE)
[Code] .....
I install Fedora10 in my computer but when it begins the process of installation, it says that "x startup failed" and falls to text mode of installation. Howerver, the graphic mode works in another computer.
View 1 Replies View Relatedon startup/shutdown i get following message "vbox guest (something) failed
what does that mean ?
opensuse 11.3 gnome
I realize this probably isn't the best place to be posting this as it relates to project open, but they don't have a forum.
We recently upgraded our Ubuntu server and now when trying to use project open we get the follow error message, does anyone know why this may be, or have any guesses as to why this may be.
Server startup failed: Error during bootstrapping
No fullquery for dbqd.acs-tcl.tcl.apm-procs.apm_package_installed_p_not_cached.apm_packa ge_installed_p and default SQL empty - query for statement missig while executing
"error "No fullquery for $statement_name and default SQL empty - query for statement missing""
(procedure "db_qd_replace_sql" line 10)
code....
I upgraded my Karmic OS to Lucid the day after it became available and have been having some troubles - I am having trouble starting the OS. Brief history: I have real troubles with the ATI graphics and spent a while trying (finally successfully) to remove fglrx and associated dependencies. I then rebooted ready to install new drivers. I now get the following error on startup:
CIFS VFS Error connecting to socket - aborting connection
CIFS VFS cifs_mount failed w/return code (-101)
For the last couple of weeks or so, I have noticed CFS errors on shutdown which has meant that I have needed to physically press the off button to turn the machine off, but since I could still operate I left that problem on the back burner "for when I have more time". Don't know if the two problems are related. Anyway, I am currently in the situation where I cannot start Ubuntu at all unless I use the install CD and try the LIVE distro.
My fstab file looks like this:
aufs / aufs rw 0 0
tmpfs /tmp tmpfs nosuid,nodev 0 0
/dev/sda6 swap swap defaults 0 0
(My PC Has a 1 TB drive and a 500 gig drive. The 1 TB drive has dual boot Vista (came preinstalled and I have a couple of games for it - else, yuk) and Linux. The 500 gig drive is a data drive). I'd rather not reinstall from scratch though may have to? I don't know of any way to repair-install the OS - maybe that would be possible too?
im unable to connect via nxclient to my remote desktop when i try i get this in the log
Code:
Can't open /var/lib/nxserver/db/running/sessionId{F83992670669DE66AABE321BB44AD3E5}: No such file or directory. mv: cannot stat `/var/lib/nxserver/db/running/sessionId{F83992670669DE66AABE321BB44AD3E5}': No such file or directory the hard drive is not full and i have tried restarting nxserver through putty + hard boot
I had debian lenny running smoothly for a while, then I think the power went out and the computer didn't shutdown smoothly. The next time I started it up I ran into this error: Checking root file system.../etc/rcS.d/S10checkroot.sh: line 274: /sbin/logsave: Permission deniedfailed (code 126)This happens in single user mode as well. I've tried fscking all my partitions but it doesn't help. I've booted in bypassing the normal init and changed the permissions of /sbin/logsave to 777 and during boot I get a message of: The file system check corrected errors on the root partition but requested that the system be restarted. failed!Then the system just reboots automatically without letting me to anything.
View 7 Replies View RelatedI have an older PC that was running F11 without any problems. At some point I started updating to F12 through the web and got a a nice black screen that pretty much hosed my OS. (Not a big deal).So I went and downloaded the F12 Live CD which did the same thing.., at some point just after install the screen would be black and reset is the only option.Got the full F12 32-bit DVD and during the installation I get: "X Startup Failed,Falling back to text mode."Finishing the install I get to a nice black log-in prompt so I can log-in as root.From there I cant do much as I am a n00d in Linux to some extent and my network doesn't work
My video card is a Geforce FX 5200 which installed and worked just fine under F11 (without me doing anything but basic install and Ubuntu 9.10)
I am using FC 2, and I get 'eth0 failed' during startup.
I am configured for DHCP
device is 'inactive' under network device control after reboot
click 'activate', sometimes I can surf, others not.
When I can't get online, sometimes deactivating and reactivating works.
edited connection to 'activate device when computer starts'
eth0 still fails at start-up, and device is inactive.
I am supposed to use FC2 for my schoolwork
I need to make a script that controls or checks certain assets of a JBoss server. Like if the server is running or down, or how much memory he uses, etc.Now, via the website of Nagios, i've found a script which i can use.Where can i find the things i need to check on this?On the JBoss server i get an overview of everything, but i really don't have a clue where to start looking.
View 2 Replies View RelatedI've seen a few articles out there, but most are old and out of date.
What needs to be done, specifically, to Jboss to ready it for deployment?
Ive alreday removed the jmx-console, web-console and jbosswc. What else would you remove/change to ready it for real production? (Jboss 4.2)
I have a netbook with a 150GB hard drive in it. A while ago I dropped my netbook and it wouldn't boot. Had a "failed command: READ FPDMA QUEUED" error at startup. So naturally I went and reinstalled. Reinstalling worked fine and I had my computer back. What I didn't account for was the fact that anytime it lost power and didn't shut down properly, I'd get the same error. I can't seem to recover my data either. Can't get any live disks to mount the hard drive after this error but for some reason I can still reinstall Crunchbang (essentially debian). Now I know there are bad sectors or something because when I try to use the disk that came with the netbook with an image of Windows XP that writes to the entire hard drive it throws an error but linux will avoid this I suppose when installing.
Now all of this is to say, being a laptop, several times I have left it on overnight when I fall asleep working or have to run into to town and it'll die and then I lose all my data, rather irritating. What's causing this error? What can I do to prevent it besides getting a new hard drive? If I can't prevent it from happening in the future is there a way to recover the data off the hard drive? Here's the section of the boot log that contains the error: [url]
I have been following the link:[URL]for understanding the log4sh.How can I put it to work for my jboss GC logs?I dont want to use log4j for some reason.
View 1 Replies View RelatedHow can I make Jboss 5.1 as a service? Whereby, I don't have to run it from ssh/command line to have it started.
View 14 Replies View RelatedI'm currently trying to stop JBoss and I'm not able to accomplish it, have look everywhere... java, etc, no idea.It was working well and then it just stopped.no changes were made from a Jboss perspective.
View 4 Replies View RelatedFor some reason I need to use CentOS 4.8.I installed Java 1.6.26 and JBOSS 5.1 on CentOS 4.8. However, When I use ./run.sh to run JBOSS I get the following message:/bin/run.jaring required file: /opt/java/jbosswhere /opt/java/jboss is the link to the JBOSS installation directory. Nothing else happens and there is no log.I tried the search the error message, but got no hints
View 2 Replies View RelatedI want to change the default path for logs in Jboss running on Fedora box? How to do the same?
View 1 Replies View RelatedI would like to install SUns (not JBoss) J2EE (not only JDK).
How can I do this ?
I did not found it in Synaptics
I would like to use a bash script to modernize my bash script for shutting down my jboss applications.
the first script is:
#!/bin/bash
#################################################
[code]...
16:46:50,375 INFO [AbstractJBossASServerBase] Server Configuration:
JBOSS_HOME URL: file:/C:/jboss-6.0.0.20100721-M4/
Bootstrap: $JBOSS_HOMEserver/default/conf/bootstrap.xml
Common Base: $JBOSS_HOMEcommon/
[code]....
As we have planned to implement jboss web server. i am curious gather some information about it.My question is where jboss stores the deployed file. Because jboss server starts with no error.but i cant able to access my application.Its showing 404 error.I just want to know the path where jboss stores the deployed file or the any log files that tells the story.
View 3 Replies View RelatedI want to copy a file to all RHQ-Agents through out RHQ-Console.
View 1 Replies View RelatedHow to start jboss portal in command mode???
View 1 Replies View Related