EB3B953E8934 3533 Sat Jul 16 22:41:24 discover@email.discover.com
(delivery temporarily suspended: host hrndva-smtpin02.mail.rr.com[71.74.56.244] refused to talk to me: 554 5.7.1 - Connection refused. IP name lookup failed for 203.121.27.186)
My son lost his USB Wireless stick for his Computer. I had thought I heard that if you had a second wireless router, you could use it somehow to detect the wireless router you have already set up in your home (like using a wireless card)? Is this what Ad-Hoc is? Either way, can this be done and if so how? I use a WRT54Gx2 Lynksys router and have a TRENDNET TEW-432BRP wireless router and also a spare D-link DI-514. I use ubuntu 10.04, and also wanted to know if I connected one of the router to his on the LAn port could he connect msaybe through an Ad-Hoc on my local computer here? He uses XP on his. I'm a newbie to linux and networking in general.
I just setup SpamAssassin and what not following this tutorial
[URL]
I am using CentOS 5.3. I was half way through that and got an email that had ***SPAM*** in the subject. Haven't received any more. First of all I want to know if spam will still get delivered, and just have a modified subject. Second, I want to know how to set it up so Spam goes to a user's spam mailbox (Virtual Users). And third of all, is it possible to disable spam filtering on a user basis, preferably using MySQL tables? Is it possible for users to mark a message as spam, and all further messages sent from that address will be sent to spam folder but only for that user?
EDIT: Yes spam is getting delivered with a modified header, on the server site, how can i deliver to spam folder? how to create IMAP virtual mailboxes on request without having to send an email to them first? Using virtual users with Courier Imap
I have installed Ubuntu 9.04 onto a USB stick (8mb). Works OK, it detects my Wireless Broadband, connects and works OK. But it does not detect the Wireless from my PC router. Do I need to install something to do this?
I currently have the following email server set up:
Postfix with mysql backend Dovecot clamav spamassassin amavisd
And it all works great. However I would like it for amavisd to forward all the marked spam into a folder on each user account, but I cannot figure this out.
router DIR 100 4 ports adsl connected to WAN Linux connected to port 1 Mac connected to a port 2
I am trying to figure why linux hostname is not detected in my LAN. The strange thing is that my macs hostname is automatically detected and put in DHCP CLIENT LIST! I have scrolled the whole manual 10 times.
My Linux (Slackware 13) gets IP address automatically by DHCP server in router. Has anyone had this problem with routers in general?
Ubuntu 9.10 comes with rt2870, the driver for my Zonet ZEW2545, and I have had to blacklist rt2800usb in /etc/modprobe.d/blacklist.conf in order for rt2870 to work. My network adapter is able to attempt to connect to my router, but after 10-40 seconds it tells me I am disconnected again. This adapter works fine on windows.
I just purchased a Western Digital My Book World Edition External hard drive and need to mount and format. My router sees the connection but I am now unsure how to proceed. Will linux detect the new device through my wireless connection? I know very little about Unix based or Linux commands.
I've installed Squeeze 2.6.32-5-amd64 on my laptop (Alienware M17X R3, Intel i7 Sandybridge, ATI Technologies Inc Broadway [ATI Mobility Radeon HD 6800 Series])The screen is 17", with maximum resolution of 1920 x 1080. After a default install of the operating system, the maximum resolution I can select is 1280 x 1024.My research so far has suggested that I need to edit the /etc/X11/xorg.conf file and provide xorg with the necessary resolution.
Again, by default, the xorg.conf file is not created. This leads me to believe that xorg is scanning my hardware at startup and providing me with whatever it thinks is appropriate. I tried following these instructions to generate an xorg.conf file. This process created an xorg.conf file under /root/.
When I copy this xorg.conf file to /etc/X11, I get a blank (i.e. black) screen. Deleting this file restores the default resolution 1280 x 1024.This system is dual booting with Windows 7. Under windows I am able to get a 1920 x 1080 resolution, so I know my hardware is up to it.At this stage I have yet to install the drivers for the Radeon graphics card.What are my options regarding configuring xorg to give me a higher screen resolution?
I have a new F12 install, and my syslog is filling up with messages about USB. I have 2 USB devices plugged in directly to the mobo (bluetooth keyboard receiver, touchscreen), and it keeps redetecting them and then disabling the port for some reason.
Because of the configuration of my house, I need two routers.I have a DLink ADSL router as my main router and the Belkin N1 as my repeater.I have set up the IP address in the Belkin to be 10.1.1.10 - my DLink is 10.1.1.1. I have disable the dhcp in the Belkin and set the DNS as ISP provided. [URL]..I have set the channel to 11 and in the Ubuntu Network Manger I have set the IPV4 to Link Local Only. I can see the Belkin and connect with my PC.but it will not take me through to the internet.
We have a vpn that is accessible to anyone. We already block port 25, 587 and 465. But I am still receiving spam reports. I believe that the users of my vpn is infected by a virus or something that sends spam. Are there any other ways that spammer send spam mails without using the smtp ports?
My guess is that they are trying to send it by accessing a webmail. Have you heard of anything like that? how to block spam?
I want to set up a Linux box as a wireless router to replace our existing Netgear WNR1000 router, as I believe the Netgear does not support the coming IPv6 protocol. Unfortunately, it is not flashable with OpenWRT or DD-WRT presently.
As we have Comcast, our cable modem acts as a dumb modem according to the customer support guy I talked to, and our router is the one that asks for the IP address from DHCP. Thus, when Comcast switches over to IPv6, I don't believe my existing router would work, correct?
My idea is to take a Linux box and put two NICs and a wireless adapter in it, using IPCop or Smoothwall to set up a router. I could then enable IPv6 support for when we have IPv6 with Comcast. Is that possible? Would there be a way to get BIND to hand out private IP addresses in the same subnet on the both the LAN NIC and the wireless card?
I have a desktop PC running Ubuntu 9.10 and Windows 7, and a Eee PC 701 laptop running EasyPeasy Ubuntu 9.04. I'd like to connect the desktop to the laptop with a wired connection (eth0), then the laptop to my ADSL router using wireless (ath0).
I have a crossover ethernet cable (I bought on ebay). I have set up my laptop with a static IP address on my LAN and it uses OpenDNS.
I have added this to /etc/sysctl.conf on the laptop:
This is a variation on what I found on other sites describing how to set up a router. I don't understand iptables very well, but I gather that the above two lines should set up forwarding so that traffic from my router to the laptop will be forwarded to the desktop, and vice versa.
But this doesn't work. The connection doesn't even establish between the laptop and the desktop.
I'm having trouble getting my network set up the way that I want it/had it. You see, when I first set up my network, I just had my cable modem going directly to my standard wired router (A D-Link DI-604), which had DHCP,and was connected to all of the computers on my network. I had one switch hooked up to one of the ports of the router, but this was a regular switch, and it would not try to assign IP addresses, it would just pass through the DHCP info as I wanted.
Now however, my network setup has changed. My room mate and I both got laptops, and we decided that we wanted to have wireless access so we didn't have to constantly plug in to the router.
Now my network is set up like this: The modem is hooked up to the router(DI-604), which is hooked up on the LAN side to our computers, our switch (which is hooked up to 3 more computers), and to a wireless router card (A Gigabyte GN-BC01).
The wireless router card has two jacks for ethernet. One for WAN, and one for LAN. The LAN side we have plugged only into the computer in which the card is installed.
Now the problem is this: The wireless router card comes with DHCP by default, and it's assigning addresses to the laptops and to the computer hat it's in, and worse, the IP addresses are on a different subnet than that of the main dlink router. The Main (dlink) router assigns addresses from 192.168.0.1 (itself) to 192.168.0.254, while the wireless router card assigns addresses from 192.168.1.1 to 192.168.1.254 (itself).
Because of this, I cannot access services on the wireless network from my wired network or vice versa. The first thing I tried was setting the card to assign addresses from 192.168.0.12 to 192.168.0.253, however it just said "internal error" when I tried to do this. I decided that this may be because it sees that it was being assigned an address on it's WAN side on the same subnet. So the next thing I tried was disabling DHCP and setting the "LAN IP Address" to 192.168.0.12, hoping that the DHCP would just go through the card, like a switch. I would have set the LAN IP address to be assigned by DHCP, but this was not an option, so I decided that'd be the best thing to set it to.
Once again however, setting the LAN ip address to an address on the same subnet as that of the IP assigned to it's WAN side caused it to report an "internal error". I verified that this was the issue by setting the LAN address to several other private IP addresses to test (I.E. 10.0.0.1, 192.168.3.1, 192.168.5.12).
My question then really is: How do I set up both routers so that I can access services and computers from each network from the other network. Should I set them with different subnets and set the gateway on the wireless network to the main router? To the wireless router card? Should I put them on the same subnet? Will it know how to communicate?
Here is a link to (picture) my network diagram. Network Diagram
I use Debian Jessie + KMail on desktop side. My mail server has Spamassassin installed. My problem is that I receive some spam and it goes though the server-side filtering.
I mark all messages as SPAM in KMail but neither KMail or the server learn that those are spam and should not enter the inbox.
How to get rid of the messages? Unsubscribing is not an option - I don't want to click on any link contained in the mails.
When something comes in that gets sent straight to my junk mail folder, a notification STILL pops up... Also of note, I would like to stop notifications for my RSS feeds... I love my RSS feeds but this is ridiculous.
So i'm wondering if this means my ubuntu server box is being used for spam or something? There are no other (human) users on the computer and i don't use it to send mails.
I've run
Code:
In paranoia, but still when i run
Code:
I get
Code:
And sometimes
Code:
Just thought i should ask before starting the tedious process of reinstalling and restoring the system.
We have a spam in our network and we installed antivirus in all our systems and cleaned the virus from all pc's after that i had removed my ip from the database of blocked ip's but still my ip is blocked for sending spam i don't know from which pc the spam is going on the internet.
so i have a question that my proxy server is redhat linux and as a newbie i don't know the command's to find out which pc is creating large bandwidth to the internet. If you tell the command how to see which pc is sending spam then i will discard that pc. Also i want a strong firewall to stop spam activities.
As of recently I've started receiving IM messages on one of my windows messenger accounts that I'm using with Pidgin that appear to be coming from certain contacts that have already been blocked. The messages are spam with a link to [URL]. Most probably there is something wrong with my security settings.
how to defend from spam mail, actually i used centos. i want to absolutely block spam, my Mailscanner running ok but the spam still run off to my server. i do everything from tuning mailscnnner, spamassassin, amaisd-new but spam still send to user 10-20 per days.
I'm using a cross-over ethernet cable to connect a Desktop Windows 7 box, and a laptop running on SUSE 11.2. I want Windows to connect to the internet via the laptop's wireless interface.
These r IP provided by my ISP that i've put on Fedora 8:
WAN IP:xxx.xxx.xxx.17 (eth0) Subnet:255.255.255.252 Gateway:xxx.xxx.xxx.18
Valid static(public) IP set of 2: IP:xxx.xxx.xxx.147 & 148 (eth1, eth2) Subnet:255.255.255.240
i want to run xxx.xxx.xxx.147 as a web server & xxx.xxx.xxx.148 as a ftp server. but I'm able to ping only xxx.xxx.xxx.17(WAN IP) from outside world. Can any1 tell me that how can i bring my 147 & 148 IP online without router.
I, as many here, have friends on different IM accounts (and btw, so great that we have pidgin and empathy and not have to deal with 3 different softwares to talk to them) and of all that I have... which are not so many... one of them sends me spam, not all the time, but it happens and I kind of feel sorry for her so I'd like to see if there's a way for her to retake control of her account or if she can't do anything at all with it.
I have other friends in MSN but I get spam only from her and she's given up on how to fix it cause she doesnt know how to. I did a search (and keep looking for more in the web) and so far it doenst look promising (but is also because I dont know what else to do). The problem is I get messages which I know for sure are spam, cause her english is more limited and the messages are very polished in that regard.
I got this from another discussion elsewhere: "troutbot = These bots get your IM from scraping the Internet screenname and connect you randomly to someone else. While you're talking to the troutbot, they're just an intermediary connecting you to some other guy who also had his IM scraped." So far the times I get spam... the other side never answers, but if my friend is online she can. I thought that on these IM services... if you are logged in nobody else can log in with your username/password...
I had setup postfix and spam assassin, and in my environment, I forward the incoming email to my exchange server.
Everything works now, in my mail box, I can receive the email with subject ******SPAM*****. but is there a solution, when spam assassin finished the scan and mark spam, if the score is very high, may be stop to forward it to exchange, for example, send it to a special email box?
I just saw that my network is slowed so I watches the /var/log/squid/access.log where I get this line continuously....
[Code]....
I thought that someone running any script so I disconnect all my LAN connection (simply removed the local lan cable) but I saw the connections is going on....so I watch the processes on proxy server but nothing suspicious....So I change my static IP and the spamming stops (I say it is spam b'coz the IP 203.188.197.10 is of yahoomail.com ) but I when I am putting my OLD ip back the connection starts again......I want to put back my old static IP b'coz I have configured it for many services. Is there any spyware on my machine or someone configured my IP?
We operate a small ISP and are currently using a debian distro as our gateway server.Recently we have had an increased number of spam issues with customers (not them sending it directly, rather the customer getting infected with a virus/malware and then their computer becoming a bot).I'd like to set up another gateway of sorts to sit after our authentication gateway but before our backbone to provide spam filtering (and hopefully virus filtering) for any traffic passing through which might be email.I've tried searching for any linux based software which would suit, but I'm coming up empty.
Surely there's something already out there which can perform this task.Finally, just to clarify, I'm not talking about spam filtering for email accounts we host ourselves (this is built into our mail server); I'm talking about spam originating from customers PC's which is passing through our gateway (but not our mail server).