I have a new HP ML150 G6 Server. I had some trouble getting CentOS to recognise the RAID array, but with some help from a LQ user, I got it sorted :-)Now I need to make an exact copy of the system. Normally I would use Acronis Echo Workstation, or the newer Acronis Backup and Recovery 10. However, this software doesn't recognise the RAID array eitherAcronis tell me that they can't help as HP won't supply the source code for the driver, and a quick phone call to HP Support confirms this.So, finally you might say, I come to my question: Is there a Linux based tool that can perform the same action as Acronis? Or... does anyone know of alternative software that would do the trick
Recently I built a web server for my clients to host in house. After talking with the web developer they informed me that i needed a CentOS computer with Drupal for them to design the website. This is my first Linux install and after spending hours upon hours configuring the server with FTP, SSH, and configuring our DD-WRT router with proper port forwarding we turned it over to the web designers to start work on the website.
A month goes by and the website is almost done, at this point we go to make a full backup of the hard drive. Due to a hardware problem it fried the circuit board of the hard drive. After attempting to recover the files myself we opted to send it to a HD data recovery facility to recover the information. We have received back a DVD containing the 2GB's worth of data from the CentOS hard drive. It contained 2 folders one for each of the partitions. I can view and see all the files on my windows machine and it appears that all of the data was recovered successfully. I harbored some hope that i could simply reinstall CentOS with the same account information and then just drop the recovered files on top of the new installation and have it start working.
I then reinstalled CentOS on another hard drive in the same computer and used the same credentials for installation. After i successfully booting into CentOS i turned off the machine and connected the hard drive it to my Windows bench machine. After booting into Windows i was unable to browse the hard drive. After doing more research and installing Ext2fsd i was able to see the 2 partitions CentOS had just created, but only able to access the Boot partition. After more research i discovered the default installation of CentOS creates a Raw file type for the 2nd partition and that is why i am having issues reading it inside of Windows.
I then downloaded a copy of Knoppix to see if this would allow me to write the old files over the new ones. After booting up the CD i could only browse to the /boot drive(and im not even sure if this is Knoppix's Virtual /boot or my CentOS /boot).
My question is what would be the best steps to recovery for my scenario? Can the files be placed to the drive and have everything restored? Is the only way to recovery thru reinstalling all applications and reconfiguring from scratch? How difficult is Drupal DB to recover in this type of scenario?
I have a fresh install of Ubuntu 10.04 and have configured it the way I like. Is there a way I can make a restore image to use for backups? I know there's software like Acronis for Windows to make bootable images, can you do something similar in Linux?
I just got a 2TB drive with the intention of backing up multiple Ubuntu machines to it. What would be the best way to do this, keeping ease of restoration in mind? Should I just copy each drive image to the BU drive, or use a utility like Back in Time?
I used Clonezilla an older version not the latest to backup an entire NTFS Windows XP drive to DVD last year. I have a series of three (3) of these DVD's but now cannot restore the backup image back to the same PC. The problem is that when booting with Clonezilla I don't have an option to restore from a CD or DVD drive since the computer comes with two working CD/DVD drives that are detected by the BIOS when the POST is displayed. I used one of these drives to boot with Clonezilla and the other one containing the backup image Disk 1 of Disk 3. Clonezilla only detects the two hard drives and a USB drive which is removable. Is there a bug in the restore process because it allowed me to backup the entire image of the hard drive onto a DVD last year but this time around there are no CD or DVD drive options available to choose other then the CD drive Clonezilla was used to boot up.
Image Hard drive Ubuntu Operating system 9.10 Complete back up and restore. Changing over Hard Drives need a complete back up not just save files. So the image can be restored on any hard drive that restores the computer to its original state before it was imaged.
I am finishing up setting up my LINUX workstation and have configured an external hard drive to use for full and incremental backups.Can someone point me in the right direction on how and what to use to do the backup that would allow me a warm to hot recovery.
I want to be able to recover from a disaster by simply inserting a CD of my entire system, boot from it, and reinstall my system back to the way it was before the disaster. After much research here, I feel the need to ask this question directlybut as a new user, I find it somewhat difficult locating information.
I have seen references to all sorts of backup software. I am trying to use Simple ackup.Each time I run this utility, it gives me a process ID and then apparently vanishes. I don't see the process running in System Monitoror see anything recognizable in var/backups.Perhaps, being as new to Linux as I am, I am simply overlooking something. I must say though, that these are the friendliest user groups I have ever seen. It amazes me that so many people are so willing to post long, complicated solutions to someones problem
I'm just setting up a partition on a seperate HDD in my system. I plan to use the partition to backup the important files on my main HDD (to guard against HD crash).
The question I have is about where would be the typical location to auto mount this partition? Which would it be normal to go for:
After recovery from a disk crash, everything seems fine except that I have lost plasma. I have a backup. Is there a way to reload plasma from the backup? I can recover kde by reloading /home/.kde from the backup. But there is no .plasma file.
I'm about to install Ubuntu Netbook Remix and my Acer machine has a recovery partition at the beginning of the drive. I've created the eRecovery discs but those will only restore XP - not the actual recovery partition (which I'd like to have in case I sell the laptop later etc).
How can I backup the actual recovery partition, and keep its boot file intact. Then how can I restore this partition at a later time?
I tried the Linux-based live CD's of the main Windows anti-virus vendors (Kaspersky, BitDefender, AVG, Avira). They work well, but they are single-purpose solutions while affected Windows users also need a solution to 1) pull data (or what's left of it) out of their contaminated Windows host onto a USB thumb drive or a remote host, and 2) restore a clean image using eg. CloneZilla. Asking users to burn and run three different CD's is not very user-friendly. Has someone already investigated combining those three features into a single live CD?
I was given a forensic Image which I now know is a DD image of the drive (Vista) and am trying to mount the image or extract the image to another drive. I'm not sure of the extention type or if the image is a partition or the entire drive. I think it is the entire drive.
Is it possible to mount a DD image to a device. If I can't do that I just want to extract the files to run some programs against the drive. Can I view the files under Ubuntu or do I have to remove the drive and stick it into a Vista computer.
I purchased a second drive today and was hoping the command line would be something simple.
Or am I on the wrong track, should I be doing this all in a windows environment. The reason I picked ubuntu was because of the reporting tools.
I have to set at Linux server(i don't know which distribution) to check something ,could some one tell me how can i take the image backup and if that possible with other software like gost image.
Can anybody please suggest a backup-image solution for Fedora 14?I made some tests with Clonezilla: it works fine but, please correct if I am wrong, it requires booting from a Clonezilla CD and cannot be used to take an image backup while the computer is running.
If I use Clonezilla to backup my Ubuntu partition I get all sorts of problems trying to re-install Grub2 after image reinstall. If I backup the whole HD will this include Grub so when I re-install the image I get the whole thing back again?
What is best to make a image or a backup. Whit what for program. By a image form what partion do i have to make a image. By backup what directory to backup.
so that when by linux is corrupt i can do a reinstall.
I have 4 different servers with exactly the same hardware. I set up one of them to have a centos install with all the basic stuff I'd like running on each one. I then created an image of the harddrive with the operating system, and stored it on an external drive. I used dd to copy the external image to one of the new machines. It worked fine, everything booted up as normal and with a few tweaks everything was great. The problem is that the drive is rather large (500gb) and it takes days for dd to copy it over. I decided to try a different route, I booted to a usb (using the linux distro on the ultimate boot cd pre-loaded with gparted). There are two partitions on the external drive, a small (100mb) partition which can easily be copied over with gparted, and the larger 480+gb lvm partition.
Gparted doesn't support lvm, so I used fdisk to create a new lvm partition on the new machine, and then pvcreate/vgcreate/lvcreate to re-create the same volume groups/logical volumes that are in the image on the external harddrive. I rsync'ed all the information over from LogVol00, and made the same swap partition LogVol01 (which took WAY less time). I disconnected the hard drive and renamed the volume group to VolGroup00 (initiall I named it differently, since linux doesn't like having the volume groups named the same). I can mount the LogVol00 partition and see all the files as they should be. But when I try and boot up, it doesn't even go to grub, I just end up with a blank screen and blinking cursor. How to make the drive bootable? Alternatively, a better strategy than using dd to restore this image??
My laptop is Windows XP Fedora 11 dual boot. I am replacing it because of a defect. The original laptop is fairly new so I could simply start from scratch and setup everything again. But I was thinking there might be a way to do an image backup and restore. My new laptop will be identical to the old one
Is there a way/command to back up all data from a Red hat Linux 4 serve[Including user rpofiles, data, group info, encrypts] either to a Red hat Linux 5.4 machine or as an Image file or manageable resource?
I have a CentOS 5.5 server that has just recently been updated to 5.6 running PostgreSQL 8.4 and Drupal for an internal website. The server is also acting as a shared network storage between the Linux server and Windows desktops with Samba.
I just recently purchased a license to run Symantec Backup Exec System Restore 2010 for Linux and the only operating systems that are supported are RedHat and Suse Linux.
Does anyone know of a nice open source solution that we can use to create backup images of the server?
In the event of a server crash, we want to be able to rebuild the server via a bit-by-bit backup image.
I'd like to do a complete backup of my laptop, convert it to ISO, and then create a bootable flash drive with it. I'd like to be able to totally restore, or run (like in Live mode) the image.
I want to restore a HDD image I have to my laptop's HDD while booted off the Ubuntu Live CD.The laptop's HDD is unformatted and has no partitions.I expected this to work:$ sudo dd if=/path/to/backup.img of=/dev/sdaBut I'm tolddd: opening `/dev/sda': Permission denied.
I have decided to remove Windows from my disk, but I want to keep my current install of Ubuntu.
One possibility that sprang to mind was to make an image out of my Ubuntu install.
Since I dual boot, the disk is numbered "SDA2" (extended) "SDA5" (root) and then there is Swap. (Windows is the first part of the disk)
One question sprang to mind:
If I make an image out of it, what happens to the numbers? Will there be any conflicts? Not to mention the question of which program would be best (and easiest to use, preferably with a GUI, since I want to save time, not learn code).
And if I would go for a binary dump to an external disk (to put it back when the destination disk is empty), would the same problems arise? Or would that bring even more problems, like the issue of the swap partition, which I would have to receate, since it wouldn't fit on the "dump disk"?
This is all because the whole thing sounds very similar to placing the ubuntu partition to the front of the disk, which, as I have been told, is not a good idea.
Well I've decided to move all my data from one VPS to another, and Iwanted to know if there was a way from within Ubuntu to make a full system image backup,ch I can then just transfer to the new Ubuntu VPS, and restore it there ..Unfortunately my VPS control does not have any working backup option right now, so I can only make the backup manually from within Ubuntu, if there is a way to do it
I Acer aspire 3620 and would like to backup whole system. My laptop has a 40Gig hdd. Is there a way I can either create an image or copy(clone) to another computer just in case I need it. If it matters I have a spare 40 gig drive on the other computer. The reason for doing this is so that I can try a system restore and if anything goes wrong I want to be able to transfer back. Also if it is posible how could I put it back and be bootable.
