Usually when a compile doesn't work, the error message indicates a missing dependancy, and it's pretty straightforward. This came up while trying to install arts-1.5.10 for KDE 3.5
Code:
mcoputils.cc:74: error: 'PATH_MAX' was not declared in this scope
mcoputils.cc:91: error: 'kde_tmp_dir' was not declared in this scope
[code]....
These days, I tried to compile my own kernel. Now, it seems work. However, when the kernel is booting, I always get the error message like below:
acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed
It looks that something is wrong with my acpi subsystem's configuration. But no matter How I reconfig it, this message still occurs.
My distribution is UBUNTU 10.04 LTS
original kernel with the distribution is 2.6.32
My own kernel is 2.6.35
This is for freeradius-1.1.7. I'm trying to compile freeradius to get around the missing rlm_eap_tls.so library, following/adapting the instructions in this thread.
Now I'm stuck at an error that says:
/bin/bash: line 20: --with-rlm_sql_postgresql_lib_dir=/usr/lib/freeradius: No such file or directory
/bin/bash: line 20: --with-rlm_sql_postgresql_include_dir=/usr/include/postgresql: No such file or directory
The directories named DO exist. The line numbers make no sense. A script error, perhaps? Or, a badly worded error message that actually means something else?
I am currently running slackware 12.2 on a 25 GB partition. I like to use slackbuilds, but when I try to compile larger tarballs (like abiword, or a patched version of Ghostscript as I did today) I receive an error-message: 'Not enough space left on device'. I think the size of the partition must be big enough (I never got this message when compiling with Linux From Scratch). I think it has something to do with the size of my /tmp directory, but I don't know how to fix this. Is there a way to solve the problem, so that I could be able to use slackbuild-scripts?
View 4 Replies View RelatedI've installed openMPI-1.4.1 on my laptop and I'm trying to compile some fortran code I've written using MPI. I downloaded the openMPI-1.4.1 file from the openMPI website and used the shell script they provide to install it. This is the shell script:
shell$ cd openmpi-1.4.1
shell$ ./configure --prefix=/usr/local
shell$ make all install
There was an additional line extracting the tar file, but I did this by hand. The first time I ran this script there was an error on the final stage saying that a directory couldn't be created because of lack of permission. I decided to run the script again this time as a sudo.
Having run the script again everything appeared to install properly, however when I went to compile some fairly simple code I got a message saying that the compiler couldn't find MPI. I was using this command: gfortran messages.f90 -o messages I looked on the openMPI website where it recommends compiling with a compiler called mpif. However when I type mpif messages.f90 -o messages I get an error message saying mpif isn't a recognized command......
I'm trying to run this script
checksum=`md5sum /usr/local/src/Wellenreiter-v1.9.tar.gz`
MD5=d8d3d10723f80c292e4dae4c14a2e4a7
if [ $checksum == $MD5 ] then;
[code]....
So I've been writing a code and I have been adding functions to make life easy, but all of a sudden when i added the last function I got this error *** glibc detected *** /home/ahzeeper/Desktop/C-code/check6: free(): invalid next size (fast): 0x0804c048 ***followed by a huge backtraceNow here is my code
#include<stdio.h>
#include<stdlib.h>
#include<math.h>
[code]...
Hi I am running a fedora 10 desktop. when i send an email using evolution the message was not sent but returns a error message:"Error while performing operation.DATA command failedError: 550 Viagra SPAM - Hi in Subject" and the message did not have an attachment just plain words. what might have gone wrong for i have been using this for sometime without a problem. or what security measures should be in place to remove this viagra spamAm I infected by virus on this fedora, all my updates are up to date.
View 1 Replies View RelatedIm trying to instal Sun Virtualbox but when download completes and I click on install I get the following error>>Message did not receive a reply (timeout by message bus) I wont even bother with this software if there are others out there that are as easy to use. I used it on Windows and thought it was great ! (thats how I eventually switched to Linux, by using it virtually at first)
View 5 Replies View RelatedUsing IMAP to retrieve emails in Evolution is not working correctly. Some messages are recieved, others are not. Those messages that cannot be recieved, reports the following error message: Unable to retrieve message
Running the following;
evolution 2.28.3-0ubuntu10
Ubuntu 10.04.1 LTS
2.6.32-26-generic
I been running both OS's for a few months now with no major problems besides wireless internet issues. Today, however, as I go to boot my laptop up, the Dell logo loads with the F2 and F12 boot and setup options which both work. Directly after that though I get the message "GRUB loading. Symbol '?' not found. Aborted. Press any key to Exit." then it repeats when I push a key, and then it tells me to press F1 to retry, F2 to go to setup, or F5 to run diagnostics. It passes all the tests in diagnostics. I've tried booting off of the ubuntu cd I used to load it initially with no luck. So I'm stuck at either that error message or in setup but I can't go any further, and it does not change anything when I tried to boot from the cd.
View 8 Replies View Related[code]...
Gives error message permission denied. I've seen this in your forums but I still haven't found the fix. I've tried the latest release Wubi downloader too. This one is ran from a CD. Version 10.04
I have Ubuntu Jaunty & Linux Multimedia Studio 0.4.2. In attempt to update to LMMS 0.4.5, I downloaded & attempted to install : lmms_0.4.5~ppa-1jaunty_i386.deb and got the following error message : Error : Dependency is not satisfiable : lmms-common (=0.4.5~ppa-1jaunty). What went wrong and is there an easier way to update ? Also, should I remove the older version or just install the latest on top of it ?
View 5 Replies View RelatedI am trying to compile kernel 2.6.33.2 (without problems 2.6.33.1), but i got the following message :
[code]...
Im having problem compiling kernel I used these commands
#make menuconfig
#make-kpkg clean
#fakeroot make-kpkg --revision=custom.1.0 kernel_image
[code]...
My system is a fc 12 using a 2.6.33.1 kernel from kernel.org ... i've prefer compile by myself to get a minimal kernel ( i got a old p4 a 1,6ghz 2gb ram) but i got fedora kernels from updates too I am trying to compile a kernel from www.kernel.org, linux-2.6.33.2 full .. i made the same with 2.6.33.1 and all ok I got kernels from fedora distro (kernel-devel and kernel-headers installed) and kernel.org I dont know why about directory paths and files ... why make finds it? ... i think that linux-2.6.33.2.bz2 include all needed how to configure the install path ? ... if i am using /usr/src/kernels/linux-2.6.33.2 and all bzip2 extracted into it ... i can't see "configure" tool I am trying to compile kernel 2.6.33.2 (without problems 2.6.33.1), but i got the following message :
[code]....
i encountered this problem when compling the tcl code, i am not sure where went wrong, did i miss any library or component?
num_nodes is set 20
INITIALIZE THE LIST xListHead
invalid command name "Agent/UDP/PDP"
while executing
"Agent/UDP/PDP create _o30 "
[Code].....
I'm a recently proud owner of a new Aspire AS3810T with Fedora 12 installed, when it boots up before entering the boot screen when it loads I see this error message:IOMMU: Mapping reserved region failedHow can i fix this error? It's quite frustrating
View 2 Replies View RelatedI'm trying to install ubuntu 10.10 on xp,but, after waiting around 2 hours per instalation I received a error message that says:" unbuntu installer : and error occurred: coercing to unicode: need string or buffer, none Type found. for more information see log file C:1customerlocals-1 empwubi-10.10-rev197.109. I tried on one particion make just for it then I even tried on xp on C: I even put it on a pendrive but my bios is old and do not provide for usb booting. The other thing I have to try is making a boot cd but for one reason or the other , my recorder do not want to recornized my cds- rw and right now I do not have any regular blank cds . That will be my next step. Note: Ubuntu appears installed on the the control panel "add or removed programs" but not in "all programs" list. I'm a novice on this so maybe the answer was posted but I couldn't find it. Looking ahead to try it and be part of the linux team.
View 1 Replies View RelatedWhen I send mail via Evoultion it does seem to send ok but still the following error message comes up: Error while sending message. Failed to append to : Unknown error Appending to local 'Sent' folder instead. Not sure what's up with that but thought I would mention it.
View 3 Replies View RelatedGreetings from Greece. I tried to install opensuse 11.3 in an empty disk . Unfortunately the installation progress stops in 88% and the message error says "error copy live image to the disk". I have burn two different cd but the result is always the same.Is it a hardware problem or the cd is not correct?I had the 11.2 version in the same pc without any problem for a long time.
View 9 Replies View RelatedI am compiling Xchat and when I was 'make install' I get this error and yes I am root.
Code:
make[2]: *** [fe-gtk.o] Error 1
make[2]: Leaving directory `/home/mark/build/xchat-2.8.6/src/fe-gtk'
make[1]: *** [install-recursive] Error 1
make[1]: Leaving directory `/home/mark/build/xchat-2.8.6/src'
make: *** [install-recursive] Error 1
I am trying to compile a simple remote procedure call program. I am getting an error:
/tmp/ccy0M5rT.o: In function 'main':
rpchighlayer.c.text+0x5c): undefined reference to 'rnusers'
collect2: ld returned 1 exit status
Code:
#include <stdio.h>
#include<stdlib.h>
main(argc, argv)
int argc;
char **argv; {
int num;if (argc != 2) {
fprintf(stderr, "usage: rnusers hostname ");
exit(1);
} if ((num = rnusers(argv[1])) < 0)
{fprintf(stderr, "error: rnusers ");
exit(-1);
} printf("%d users on %s
", num, argv[1]);
exit(0); }
Im trying to install the latest stable release of Samble but I am recieving errors during the make process.
Also is there and ezier way to install samba than compiling from source?
Forgot to mention i cannot use yum because this computer cannot be connected to the internet.
I am using Fedora 11 (2.6.30.10-105.2.23.fc11.i686.PAE). I got a patch for tpm_tis.c which a module to get my itpm working. And, for this I thought to customise the existing kernel and install new one.
So, I followed the foolowing steps:
In 'make menuconfig' , I have disabled Kernel debugging in the Kernel hacking section.
Then changed EXTRAVERSION to something like .test in Makefile
And, My Idea is to follow these steps:
I'm currently using Fedora 12 with kernel 2.6.31.9 and I was trying to upgrade to 2.6.32.2. These are the steps I followed. After rebooting and choosing this kernel from the Grub menu, I'm just greeted with a black screen with a blinking cursor and it won't proceed beyond that.
These are the commands I issued. I received an error on the first make modules about the mismatch. I then ran CONFIG_DEBUG_SECTION_MISMATCH=y and once finished I ran make modules again and it completed successfully.
Code:
Downloaded kernel package 2.6.32.2 from www.kernel.org
untar archive
make menuconfig (no changes made, saved config file)
make
[Code]...
New to this kernel stuff But not too new to C/C++. I'm trying to compile the linux kernel on a PC, that is running Windows XP 32 bit, using Cygwin. I keep getting the error saying:
Error: Not ELF
make[2]:*** [scripts/mod/elfconfig.h] Error 1
make[1]:*** [scripts/mod] Error 2
make:***[scripts] Error 2
Every time I try to compile it from the main directory of the source, which I hope is what I'm supposed to do, I always get this.
I have tried to compiled e2fsprogs-1.41.12 to be used on my android device that runs linux kernel. I need to compile it with -static option but building returns error First is the configure:
[Code]...
When I compiling gdb for ARM processor I am getting this error as:
Code:
checking for iconv declaration... install-shextern size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);
checking for library containing waddstr... no
configure: WARNING: no enhanced curses library found; disabling TUI
checking for library containing tgetent... no
configure: error: no termcap library found
make[1]: *** [configure-gdb] Error 1
make[1]: Leaving directory `/mnt/freescale/sources/gdb-7.0'
make: *** [all] Error 2
sharief@sharief-desktop:/mnt/freescale/sources/gdb-7.0$
What will be the error. I think the termcap library is not there. I downloaded and cross compiled tremcap library but still it is not working.
I em trying to compile fop-1.0 on Slackware64 13.1. I have ant 1.8.1 Slackware package.
Here is the output of ant build:
Code:
