When I try playing a movie using mplayer, it says The following plugins are required
MPEG -1 Layer 3 decoder
Divx mpeg-4 version 5 decoder
or
could not determine the type of stream
In the first case, clicking on the search option, error occurs (probably because of the proxy I am working behind) I can use yum install though behing the proxy. How can install these codecs from the command line ?
I have FC10! so far i have downloaded the mplayer and its codecs.further i extracted both the packages( in DOWNLOAD folder).but I'm not able to extract the codecs in the /usr/local/lib/codecs directory.it says you do not have permission. how should i know whether to compile the mplayer or is it pre-compiled?
View 10 Replies View RelatedI am trying to install gnome mplayer and later mplayer codecs.script run
Code:
root@zorro:/home/siawacsh/Downloads/MPlayer/mplayer/slackbuild/gnome-mplayer# ./gnome-mplayer.SlackBuild
gnome-mplayer-0.9.8/
[code]....
I have an mkv file that I'm trying to player with mplayer, but no video is showing up. Mplayer was installed using apt-get install mplayer since ./configure when I try to build mplayer gives me a bunch of garbage:
Current branch master is up to date.
Detected operating system: Linux
Detected host architecture: i386
[code]....
But, after installing mplayer using apt-get, I can't get any video for the file I'm trying to play. I've tried copying the files from "all-20110131.tar.bz2" to /usr/local/lib/codecs but I still don't even get a box for video. Everything works fine using the built in movie player--even the subtitles are shown correctly.
i have FC10! so far i have downloaded the mplayer and its codecs.further i extracted both the packages( in DOWNLOAD folder).but I'm not able to extract the codecs in the /usr/local/lib/codecs directory.it says you do not have permission(despite of being logged in as su). how should i know whether to compile the mplayer or is it pre-compiled? do mention about the codecs issue!
View 2 Replies View Relatedi'm running a 32bit system installed slackware 13.1.
i'd like to watch a 720p movie but it doesn't run smoothly. so i tried to install the coreavc codecs.
Did all these instructions step by step:
1- http://code.google.com/p/coreavc-for...erInstallation
2- http://code.google.com/p/coreavc-for...wserverInstall
3- http://code.google.com/p/coreavc-for...ConfigureCodec
never got an error mesage. In my ~/.mplayer/config file I also added vc=coreserve,.
If I start the 720p movie, there aren't any changes. It is still jerking.
I'm not sure that MPlayer is really using the codecs, how can I look if it is using it or not?
I downloaded the mplayer essential codecs pack and extracted in directories mentioned.I even compiled mplayer and it can play now almost all the files. But I am having a problem.The problem is that other multimedia players dont play even a single file.I tried with xine,totem,kaffiene and every bundled player.
View 6 Replies View Relatedi have installed fedora 12 and i can not get VLC media player to read the DVD. i have installed the RPM repositories and the VLC player.
i had fedora 10 previously installed, i installed the RPM repositories and the VLC player and things worked fine.
I'm trying to use mplayer to stream some content from the net to my desktop. This worked fine the first time I did it (though failed dismally on all subsequent occasions. Now, the first umpteen times, I was behind a proxy. Now I am not behind a proxy, but mplayer still looks for the proxy settings. Why? I have changed the proxty settings in the network proxy (applied globally), in Firefox and every where else I can think of. I use the following command:
Code:
mplayer -dumpstream -dumpfile ~/Desktop/<desired_filename>.avi http://<source>.avi
and I'm told in response
Code:
Resolving www<proxy> for AF_INET6...
What gives? Why is mplayer trying to use a proxy, and how can I tell it not to?
I need to install restricted codecs (MP3, WMA, etc) in Fedora but I wanna download them at home. Is there a way I can download them in Ubuntu, put them on my USB Hard drive and install them from there?
View 10 Replies View RelatedI have installed latest version fedora 11,when I install mplayer to have an error,I don't how to do,
[root@Robin Robin]# yum -y install mplayer
http://rpm.livna.org/fedora/11/x86_6...ta/repomd.xml: [Errno 14] HTTP Error 404: Not Found
http://livna.cat.pdx.edu/fedora/11/x...ta/repomd.xml: [Errno 14] HTTP Error 404: Not Found
[code]....
am new to fedora using fedora 14.can some one help me to install gnome mplayer...
View 5 Replies View RelatedI'm trying to install mplayer(=DVD-player) on my system. In fact it means compiling from source code. But I don't know how to compile from source code (Don't know the exact commands).
View 12 Replies View Relatedhow do install mplayer on fc10?
View 7 Replies View RelatedI just reinstalled fedora and I cant run any movie now, I tried to install MPlayer, vlc, xine for 1 hr but dint work, no yum is found I don't know what's going on, vlc never worked for me I never got it but I never had problem installing mplayer
Code:
[root@localhost ~]# yum -y install mplayer mplayer-gui mplayer-skins mplayer-fonts gecko-mediaplayer
Loaded plugins: refresh-packagekit
Setting up Install Process
Parsing package install arguments
No package mplayer available.
No package mplayer-gui available.
No package mplayer-skins available.
No package mplayer-fonts available.
No package gecko-mediaplayer available.
Nothing to do
This is what I am getting same for vlc. I even tried yum -y install mplayer and very sort of thing but the above command worked for me previous time I don't know what's going on this time.
[root@zhuhaiping MPlayer-1.0rc2]#./configure --prefix=/opt/mplayer --enable-gui --enable-freetype --codecsdir=/opt/mplayer/codecs --win32codecsdir=/opt/mplayer/wincodecs/ --language=zh_CN
it's ok ,but when I configure like this
[code]....
But when I make there comes this problem which as follows ;
vo_ivtv.c: In function 'ivtv_reset':
vo_ivtv.c:79: error: storage size of 'sd' isn't known
vo_ivtv.c:80: error: storage size of 'sd1' isn't known
[code].....
I cannot yum install mplayer nor vlc:
Code:
#yum install mplayer mplayer-gui gecko-mediaplayer mencoder vlc
Loaded plugins: presto, refresh-packagekit
Setting up Install Process
No package mplayer available.
No package mplayer-gui available.
No package gecko-mediaplayer available.
No package mencoder available.
No package vlc available.
Nothing to do
Code:
#yum repolist
Loaded plugins: presto, refresh-packagekit
repo id repo name status
fedora Fedora 12 - x86_64 19,122
flash flash 1
livna rpm.livna.org for 12 - x86_64 3
skype Skype Repository 1
updates Fedora 12 - x86_64 - Updates 6,836
repolist: 25,963
Has something changed that I have missed? And I have done a yum clean all.
im using redhat linux EL5 .im using kernel version 2.6.18-8.el5.in this i want to install mp3 player.i dont know which player is best in redhat.pls tell me the procedure for installing player in redhat .where i what download rpm packages.
View 3 Replies View RelatedI am using redhat Linux 5.4 Server Edition. I am not able to to install Mplayer or VLC Player in various formats (.rpm , tgz). Kindly give me a guidance to Solve this ....
Error 1:-
cannot retrieve repository metadata(repomd.xml) for repository. Please verify its path and try again.
rhel -debuginfo
rpmforge
Error 2:-
no rule to make target "buildsys.mk". Stop
Iv tried everything to install the codecs for my system, the one click install, the manual provided for by openSUSE but no luck. All the files were installed correctly but alas no file will play. I need a solid answer. I have 11.2 GNOME on a 32 bit processor
View 9 Replies View RelatedI recently decided that I want to install mplayer on fedora 13. Problem is, everytime I try, a new problem arises. I've tried add/remove software, and it said "package download failed, check internet connection" which doesn't make sense because I'm connected to the internet and my connection is fine. So, then I tried yum install mplayer, that gave me an error.
View 5 Replies View RelatedI tried this on Fedora 12. The proxy settings for yum are set (yum update is working fine)
Code:
[URL]
I get this :
Code:
Retrieving http://download1.rpmfusion.org/free/fedora/rpmfusion-free-release-stable.noarch.rpm
curl: (22) The requested URL returned error: 400
error: skipping http://download1.rpmfusion.org/free/fedora/rpmfusion-free-release-stable.noarch.rpm - transfer failed
How to use rpm from behind a proxy ?
I've been trying to make myself anonymous, but I cant find 'Tor' anywhere, tried 'yum & kpackagekit' neither have it. I did find 'Privoxy', installed it, set proxy for HTTP and HTTPS in Firefox, but it says 'unknown proxy' when I try to use it! I've been to the Privoxy web site and read through the 'User manual', but most of it is 'geek' to me!
View 8 Replies View Relatedi'm unable to install my downloaded codecs into my system
View 9 Replies View RelatedHow to install multimedia codecs in Lubuntu?
View 9 Replies View RelatedRecently installed Ubuntu 10.04. Is there a definitive list somewhere of all the repositories and codecs I need to install to bring this distro up to speed with WinXP or Win7?
View 2 Replies View RelatedI was trying to play some mp3s and mp4s in my totem but keep on getting this error report of which I have attached some screenshots. I also tried to download some things that I usually put on my system such as: vlc, ffmpeg, dvdbackup, dvdrip, audacity, thoggen, handbrake, audacious & sound converter but I fail in the process.
Here are my outputs:
Code: [root@localhost ~]# yum install ffmpeg libdvdcss libdvdread libdvdnav libdvdplay lsdvd mplayer gxine
Loaded plugins: refresh-packagekit
google-chrome | 951 B 00:00
google-chrome/primary | 1.4 kB 00:00
google-chrome 3/3
Setting up Install Process
No package ffmpeg available.
[Code]...
I use fedora 12 now, and I have set network proxy in system->preferences->network proxy,but I can't using yum to install software.
View 3 Replies View RelatedI am working on fc10. I connect to internet using two connections: with proxy and without proxy. Initially I had some problem in configuring yum for proxy and I resolved it by creating files proxy.sh and proxy.csh in /etc/profile.d with the required details (export_proxy).Now when I connect to my connection without proxy I have some problems .Whenever I try to do yum update I get the following error:
"[URL]: [Errno 12] Timeout: <urlopen error timed out> Trying other mirror. Error: failure: repodata/primary.xml.gz from adobe-linux-i386: [Errno 256] No more mirrors to try." what changes do I need to make in order to use yum in the connection without proxy?
What is the necessary codecs for fedora 12 to play all type of audio and video files, avi,rm,wma....
and how to install them by yum?