When I try to install this extension in OpenOffice, I'm asked to read (and scroll through) the "Extension Software License Agreement" and accept it - but there are no buttons and no scroll bars. I tried clicking all over in case it was just invisible, but no luck.If I close the window, installation doesn't proceed.I'm on Mandriva 2009.0, but thinking of trying out Debian.
View 4 RepliesInstalled Fedora 13 on an old computer (Sony Vaio RX660 with a 1.8 gig P4 cpu). Downloaded java 21 bin file and as root, placed it in a folder I created: /usr/java so it would be accessible to all users.as root in terminal I did a chmod a+x to the file. Then ls -l, which showed I had full read/write with it. Finally, still root, and in terminal, I did the ./jre <etc>.bin and the package immediately unpacked and created files, but never showed me a license agreement to accept.Java, of course, does not work. What am I doing wrong
View 9 Replies View RelatedI am creating a slient setup script on an ubuntu machine that also installs additional packages. one problem i am having is that the sun java package needs a manual confirmation of the license agreement. is there a chance that i can automate the installation so, that the process does not wait until i manually confirm the dialog?
View 4 Replies View RelatedI've been trying to install java, but whenever I get to the license agreement I can't select "Ok" stating I agree to the license.
View 3 Replies View RelatedUbuntu 10.4 -- I am trying to install Java into my browser following the instruction below. But I am stuck because when I get to the screen with the license agreement I hit enter and nothing happens. So I cannot agree to the license and cannot finish the installation. Can anyone get me out of this bind?sudo apt-get install sun-java6-jre sun-java6-plugin sun-java6-fontsThe above command will download all the required packages and begins the installation, you�ll get a screen that contains the Sun Operating System Distributor License for Java and hit Enter to continue.You�ll see a dialog that asks you if you agree with the DLJ license terms
View 1 Replies View RelatedI'm trying to install a language-pack for my OpenOffice, but there seems to be a dependency-problem. Maybe someone has a suggestion. FC12, x64 OOo.x64 3.1.1
Code:
[root@sarah yum.repos.d]# yum install openoffice.org-langpack-de
Loaded plugins: fastestmirror, presto, refresh-packagekit, remove-with-leaves
Loading mirror speeds from cached hostfile
* fedora: ftp.astral.ro
* livna: rpm.livna.org
[Code]...
Section breaks within chapters. They are used by simply skipping a double-spaced line of text. Now my question after be confused because the Windows format:
I go to:
- Insert
- Manual Break
- Type:
Line Break
Column Break Page Break Which one is really the section break? Line Break? I am trying to avoid chapters so I can continue on the same page.
I am using Maverick and I like to update through the terminal using sudo apt-get update and then the subsequent upgrade command but this time it asked me to to agree to EULA's end user agreement. The agreement popped up and I can't figure out how to accept it. I don't have very extensive knowledge of the terminal. I already pressed enter and Y. Neither worked. what button to press?
View 2 Replies View Relatedi have to agree the term of agreement before runing it becase i want to automate my installation with a scripti have already tried "yes | ./myfile " but the problem is the agreement is more than one page and i need to hit space couple of times .. so it's not working .
View 7 Replies View RelatedAfter i tried a lot of mpd.conf tricks, I followed the tips on [url], namely, adding the mpd user to groups pulse and pulse-access. Now, which makes me really happy, MPD can have audio output. Downside: no other program can make sound, I can't make my beats again with lmms etc. The volume icon in the top right is always on mute, when i click preferences, the hardware tab didn't even show a device. Now it does, but nothing comes out except mpd out - and pressing the volume keys will display a notification but the main icon in the bar stays on "---" mute. Can i make mpd just an application on the pulseaudio outputs list, so that it can play nicely with the other guys?
View 1 Replies View RelatedI just got a set of updates from Xorg11 (Index of /repositories/X11:/XOrg/openSUSE_11.1/i586) repository and now, my X doesn't come up. During update, zypper complained about xorg-x11-libxcb and it didn't get updated. On further investigation I noticed that libxcb-xlib.so.0.0.0 is missing in the new package (version 7.4-4.2. The one currently installed in 7.4-1.24).
View 9 Replies View RelatedI'm using rpm either debian as an installation package for our developed product (multi-targets)I have to display a EULA (end-user license agreement) during its installation.How can I design that requirement ?
View 3 Replies View RelatedAfter upgrading to 11.2, I get the following error when starting any xclient. Worse, its usually repeated a few times for each client.
Xlib: extension "Generic Event Extension" missing on display <my_ip>
I get this both when using Xming and nomachine.
I'm a regular OpenSuse user, but recently I had to download Windows7 on my computer for work. Everything was fine for a while, but now when I switch to windows, the wireless doesn't work sometimes (sometimes it works just fine). When this happens wireless is broken on the Linux side as well. The only way I know to fix it is to hard wire the laptop when booted into windows, and then everything is back to normal. It's really starting to tick me off and I have no idea what may be causing it. I didn't even know the two partitions can effect each other.
View 9 Replies View RelatedI've had a graphical card and I've downloaded the driver (from the official website of NVIDIA) with extension .run. As I forget the command line to install it, I would like to ask about it.
View 3 Replies View RelatedMy son wants to install Wintendos so that he can play starcraft 2 on my new comp. But it doesn't seem to work. Every time I try to install it the install breaks down with an error message like, no boot disc/media can be found. (This is after the install has started, a couple of minutes in.) I suspect that Microsoft doesn't support usb 3.0 in their native distribution of win7, not sure though. And that my comp only has usb 3 ports. How do I check what kind of hardware my comp is packing, specially USB ports.
View 3 Replies View Relatedhow to install C++ extension to eclipse?
View 1 Replies View RelatedI wanted to try my hand at programming in an easy way, so I installed from the Ubuntu Software Center Basic-256. But it is more than 3 years old and does not fit to a book I downloaded. I got from Sourceforge the latest version which is a .tgz file. How do I install it?
View 9 Replies View Relatedlike the title says im unable to install VNC-eterprises i downloaded from a torrent site i had downloaded it b4 i formatted my pc from a xp ubuntu 10.04 dual boot and it installed just fine with 0 problems now i get his error
View 1 Replies View RelatedI have recently installed Debian 6.0. Tried to install a program ,but I could not do it. The prog is called IOmeter (sorry, can't link it). I have also tried the " sudo apt-get install command i the terminal. It's easy to install the prog in Windows.
View 2 Replies View Relatedi have just installed peppermint ice and the default browser is chromium but when i used firefox there was a up and down arrow at the side of a web page,there is no arrows in chromium and i was wondering if anyone knows if there is an extension to install one in chromium?
View 6 Replies View RelatedI was wondering if there is a way to install mysqli extension for php on Fedora without having to recompile whole PHP.
View 4 Replies View RelatedHow do I install php-sqlite extension on fedora 14.
View 5 Replies View RelatedI can install the extension MozillaThunderbird Lightning for opensuse 11.3 and Thunderbird v3.1.1. I find on the web for 1-click install is for openSUSE 11.2.
View 1 Replies View RelatedWhen I try to get to the configuration of my monitor by using KDE Settings -> hardware -> monitor, I receive the msg: "Your X server is running the RandR extension at version 1.2 or greater which doesn't have any configuration yet." and it refuses to go further. What does this mean and where should I configure it? When I use Yast, Sax2 starts normally.
View 9 Replies View Relatedim trying to install tine 2.0 on a webserver at my uni but i need to install mcrypt extention i also get an error message with phpmyadmin. the server has php 5.2.8 installed and Apache 2.2.10.
i have followed a guide found at this url but i dont know how to rebuild php. [URL] i have downloaded and installed
libmcrypt-2.5.7
mcrypt-2.6.4
mhash-0.9.9.9
i uncompressed in the pacakages in thr root folder /root/ then cd ed in to there root folder ran these commands as per the guide:
./configure
make
make install
ldconfig
I just installed a test Natty VirtualBox server from the "mini" iso. After doing that the normal boot always ends with a blank screen and cannot login. The recovery boot option does work normally. After much digging around and various tests I found that the "splash quiet" boot options cause this issue.
I removed them from the /etc/defaults/grub file and ran update-grub. Next boot the login screen came up after as normal. It seems when the splash flashes that purple screen with the Ubuntu 11.04 message it is breaking something and does not get back out of some graphics mode.
This is in a VirtualBox window and I noticed that vesa framebuffers seem to be used by default in grub now. I never had this issue in previous releases and I'm just wondering if others have seen this and if there is a better fix than disabling splash. I don't mind having it disabled as this is a server install anyway and I'm fine with seeing debug messages during boot. If other have seen this then perhaps it needs to be logged as a bug?
i'm trying to install php zip extension through pecl, issuing the following command pecl install zip but i'm getting the following error:
[code]...
I didn't delete my old extension and recently mounted it so I could retrieve the data. I was wondering if there was any way I could make it the extension to my current native without deleting any of the data? Or if attaching it as an extension was at all possible at this point.
View 9 Replies View RelatedI want to install Forms & Reports Developer Suite in Linux OS So I have downloaded Oracle Developer Suite 10g for Linux (Including Forms & Reports)
as_linux_x86_ids_101202_disk1.cpio
as_linux_x86_ids_101202_disk2.cpio
So in the Oracle Documentation Site they have given Guide as Follows:
To extract the cpio file,
move the cpio file to an empty directory,
then do:
cat filename.cpio | cpio -icd ....
but its not extracting.