I've been trying to find a good solution for this, and so far I've not had much luck. Web-based solutions have been laggy and buggy, and any software solutions seem to be windows-only.
I can set up a server on my machine if needed, but opening ports on all the participants is definitely not an option. Windows compatibility isn't necessary, but a nice-to-have.
Is there an open-sourced based group video conferencing like skype group video conferencing? Basically the same post that I had posted before but with video?[URL]..
View 4 Replies View RelatedI'm looking for an application for Linux that will connect to an H.323 video conference and allow the user to send their desktop as a video stream, instead of using the image from a webcam. This is for giving presentations, when it is usually more useful to see the speaker's slides than their face.
All I have found so far is Ekiga, but as far as I can see it doesn't offer this facility. Something free would be nice of course, but paid-for software would also be of interest.
I want to watch a certain video on [url]...., but I get an error message instead. Some videos can be played, so I'm thinking it's a form of restriction, but I can't be sure.I tried using a few proxies, but on some the error message persists and on others the video doesn't load. I'm running Ubuntu 9.10 and Firefox 3.5.8.
View 2 Replies View RelatedI wanted to see the current video stream of oil leak in the gulf but when I go to the page the video is black. When I click on the video it give the error message Quote:
An Error Occurred: Could not write to resource. I am not sure what that means or how to fix it.
I have two seperated video clips, that captured same event from two cameras. i would like to create one clip, that will show one on the left side, the second on the right side, and play together.
View 8 Replies View RelatedI've been playing around with Damn Small Linux 4.4.10 on my Dell Inspiron 3000 laptop for quite a while now, and this is the first time I've been downright stumped. To make a long story short, I'm trying to play 480p video on a machine with a 233 MHz Pentium processor, 112 MB of ram, and a Neomagic MagicGraph 128XD graphics card (NM2160). Crazy? Maybe, but I don't think so. I'm using MPlayer set to Xv mode with the XFree86 4.3.0 server, and so far, I've been able to get it to play 360p mpegs with minimal stuttering. However, MPlayer crashes with 480p. This is because the 128XD only has 2 MB of memory, which, after the 1024x768x16 screen takes its share, doesn't leave enough room for a 640x480 overlay.
The creators of MPlayer are aware of this limitation, and suggest adding the following line to my XF86Config file: Option "OverlayMem" "829440"
As I understand it, this is supposed to extend the video card's frame buffer into system memory, thus allowing the higher resolution video to play. However, it doesn't work, based on this output from my XFree86 log file: cannot reserve 829440 bytes for overlay...
Some other suspicious-looking lines from the log file:
I have an integrated intel video and latest xserver-xorg-video-intel driver(using only stable repo). Now I wanna watch high-res video. From the bits of info collected from all over internet I understood that I need to:
1.aptitude install libdrm libva.
2.compile or find the .deb mplayer-vaapi and install it.
3.add -vo vaapi -va vaapi to the mplayer command line in gnome-mplayer.
My question : is that correct or did I miss something? Do I have to compile latest libdrm and libva or the ones from the squeeze repo will be good? Do I need kms enabled, i.e. install firmware-linux-nonfree?
I'm looking for a Linux tool that allows me to transcode videos to a video codec that is highly compatible to the Windows platform. We produce large scientific videos from measurements and would like to show those videos during presentations and submit the videos to journals. We want to be as compatible as possible (we can not influence for example the codes installed on the presentation system or on the journal reviewers system).
Virtualdub suggests one of these codecs:
* Radius Cinepak
* Intel Indeo R3.2
* Microsoft Video 1
We tried ffmpeg, mencoder and Virtualdub under wine, none of those tools could produce videos encoded with the aforementioned codecs.
When I play large HD videos in mplayer, the video and sound frequently get out of sync, and the video plays a little strangely (occasionally speeding up and occasionally slowing down).
I think it's because mplayer is only running on a single core. As I've got a quad-core processor, it seems inefficient. I've seen that there is theoretically a way to get mplayer to work with multicore setups, but it requires compiling with different options. That'd take me a little while to work through.
Ideally there would be a pre-compiled version in the software centre, or a player which has support built in (again, ideally in the software centre). Is there such a thing available?
is this possible? Or does one have to use the binary blobs?
View 1 Replies View RelatedIf I take out the existing video card and put in another one of a different type (but not a different brand), how does Ubuntu behave? I know what Windows typically does. Windows starts up the screen using a default video driver which is at least 1024 by 768 and then asks you what this new bit of hardware is and asks where the drivers are. I'm pretty sure Ubuntu has default drivers of its own, but I don't know what their resolution is.
View 3 Replies View RelatedI recently bought a video card for my pc. I had it running pretty nicely on Ubuntu10.10, I started windows and later restarted and after that it wouldn't get past the Graphic cards bios. this is rather odd isn't it? I suspect it maybe dead or that my motherboard bios is stuffed but i reset that too and it still wont go.. The specs are Pentium4 Proccesor 1gb ram motherboard 661gx-m7 Nvidia GeForce FX5200 DDr128mb
View 5 Replies View RelatedI have a video file in which the audio runs faster than the video, so they quickly go out of sync. The way to fix it would be to separate the audio and video streams, speed up the video (the audio is FINE, it's the video that's wrong), and then recombining them. What is the easiest way for doing that?
View 7 Replies View RelatedGot a bit of a problem where xorg can't start kdm. I pulled out a dying AGP card to try and switch to onboard video, and I think the previous configuration is gumming up the works.I've been running this system for quite a while, as you'll be able to tell from the version numbers.Would like to avoid having to transport my Amarok databases to a new server. I make heavy use of the song ratings and whenever I try to transport the database from the old system to a fresh build I have to spend hours relearning sql commands.Any ideas how to either fix the resolutions on the ATI or (preferably) get KDE to start on the onboard graphics?
View 3 Replies View Relatedvideo playback is like I have applied a blueish sepia filter over it. And this is just the playback from totem player or mplayer, and not the playback from ..... (and generally online streaming) - this works just fine. this messy video playback also appears when I use cheese to capture video with my webcam. Note that the preview picture of the video file on nautilus has the natural colours it should have.
at first when I installed the os this particular problem didn't exist, but it came up the time I decided to follow the "comprehensive multimedia guide". So now I have all the pros of following the guide, but this is a major con...
i have a problem with video.when i make full size video from browser or from video player i see only black screen.can anybody help me pls?
View 8 Replies View Relatedthis happens with both VLC and Totem, when in either of those programs playing a video, if I click on one of the top menus, say View in Totem, the video stays on top of the drop down options. In order to see the options I have to hover over them with the mouse at which point they become momentarily visible. I read a post somewhere where someone had a similar problem and it was solved by reinstalling Compiz, but I've tried uninstalling it entirely, reinstalling it, etc. and none of it works. It doesn't happen with flash videos in firefox, it does happen with visualisations in Totem, and it only started happening since I upgraded to 11.04.
View 4 Replies View RelatedOpenSUSE 11.1, 64 bit, 2 cores, intel graphics, 4 GB of RAM:_no_ problems
OpenSUSE 11.4, 64 bit, 4 cores, nvidia graphics, 16 GB of RAM:
Problem is very similar to: Problems playing mkv HD films in opensuse but not windows but with enough differences that I start a new thread:
* playback in VLC does not work -- there is only sound
* playback in SMplayer works, however -- when I scroll forward, the video freezes and sound continues, to unfreeze video I have scroll a tiny bit backward
I tried changing the video ouput driver (in SMplayer) from xv to xv/noveu-nvidia, it didn't help. Please note, that I use the same settings (initially) as before in OS11.1.
the movie i downloaded plays for only 19 sec and stops saying you will be redirected to microsoft download page. the file is 700 Mb. i installed w32 codecs after searching through many threads but still my vlc doesnt play the file.
View 1 Replies View RelatedI'm using 9.10 on acer aspire one (not the netbook remix).im using the default messanger client empathy.everything else works fine but when i try to video chat the video chat begins but if the other person even moves a litte or even nods his head then the video becomes so choppy that u cant see anything and then after 5 min comes back to normal for a second or two.i have all the latest updates and gstreamer0.10-ugly-multiverse which is required for video chat b/w empathy and gtalk.
View 1 Replies View RelatedMy system: Pentium 4 3.6 GHz, 3 Gb DDR ram, GeForce 210 video card, Ubuntu 10.04.
I have previously used Cinelerra-cv (on Karmic) and recently Openshot (on Lucid) with not much trouble. I have been sampling other video editors (Kdenlive, avidemux, kino etc). Now I have my video card crashing whichever I use, mainly when trying to load clips. I have disabled Compiz, uninstalled all video editors and then reinstalled one at a time. I still get early video crashes whichever I try.
I am setting up a MythTV environment to switch from Windows based MediaPortal (with a high number of disturbing bugs). Yet, I have three difficulties, which I want to discuss with you. They are:
- No audio via HDMI see [URL]
- Video resolution seems to change during video playback
- Channels cannot be found via DVB-S [URL]
As you can see, I have created three posts to keep discussions focused.
Alltogether I have the following setup:
- AMD 5050e CPU
- 8 GByte RAM
- Biostar TA890GXE
- Samsung LE40M86BD, connected via HDMI (and only HDMI)
- Mythbuntu 10.10 with proprietary drivers installed
- Technisat Skystar HD2 DVB-S card (two times)
Now, here is the problem:
Whenever I playback any video material using e.g. VLC, the screen resolution changes. This also applies when playback the video in a window and not fullscreen. The problem is that whenever the screen resolution changes, short time later the TV set blanks screen and show the TV set specific information "unsupported video mode".
How can I enforce to stay in the configured video mode?
I installed Debian recently, and everything seems to be working fine, except some video games are unusually slow compared to what they would normally be. Tremulous, for example, worked reasonably fine on this computer with Windows XP, but now (Debian) for some reason it's laggy even on the title screen.
Something wrong with my video drivers?
All of the information I know:
The computer is a Dell Dimension 3000
RAM: 256mb? Gnome System Monitor says 247.1mb, SWAP: about 730mb
Processor: Intel Celeron 2.40GHz
HD: 25gb out of a 40gb HD free, and an external 1tb HD with about 920gb free
Debian Release 6.0 (squeeze)
Kernel Linux 2.6.32-5-686
GNOME 2.30.2 (I've tried LXDE also, no noticeable change)
Only linux on the machine.
glxinfo told me this:
Code:
64 GLX Visuals
128 GLXFBConfigs:
lspci told me this:
Code:
I am trying to resolve an ongoing fight involving /dev/video node assignment between 2 TV Tuner cards and a USB video camera.
Each time I reboot the three devices seem to shuffle their /dev/video assignment. i.e. what was /dev/video0 (USB camera) after a reboot magically becomes /dev/video1.
This causes all kinds of grief between my MythBackend and ZoneMinder who expect the devices to have static assignments.
how to best solve this? I did a brief search and one solution appears to be to statically assign the devices.
Phenom 9500+ quad core, 3GB RAM, Nvidia 8800GT: 260.19.36 driver.Installed the latest Boxee for Linux. Got my remote setup. Everything works except when I open a video it opens in a tiny box in the upper left hand corner of my monitor.Is there any way to get Boxee videos to play full-screen?
View 6 Replies View RelatedWhen I play a video in Totem, MPlayer, VLC or whatever, my displayed windows will look transparent in a funny way. Letters are not readable, colours get distorted and images with a black background (colour 0) will display the partial video in it.
View 1 Replies View RelatedI just installed Lucid Lynx RC 1 on my MSI Wind U100 netbook. When I tried to play a video on it I was informed of a lack of codecs, so I downloaded my video player of choice: VLC media player. When I tried to play the video, there was audio but the screen was black. The same thing happened when I downloaded to codecs and used the stock video application.
View 3 Replies View RelatedI'm running lucid. I have attempted several times to place a video call to Google talk contacts from empathy. The voice works fine and video from party is received successfully, but empathy won't broadcast my video. I know it's not a hardware issue.
View 2 Replies View RelatedJust installed Ubuntu 10.10 on an old Dell Dimension 8400 with an ATI RV370 Radeon X300 video card and 512MB of Ram. The video seems to go very fast and skips. I followed the Comprehensive Multimedia & Video Howto but still have the same issue. I have also read many posts but I have trouble understanding some of the responses. Could it be the low amount of RAM?
View 1 Replies View Related