Slackware :: Use UDF As The File Format?
Sep 9, 2010
I have a new external 500gb drive I want to format and put data on. I first formatted it as Fat32 as I'd like to access it with Windows at some point. I ended up having a few files over 4gb, so that didn't work.
I'd like to use UDF as the file format. Does anyone see any issues with formatting a 500GB drive with UDF? I don't see any reason why I would want to WRITE to the drive in Windows, just read...but there is software out there to allow Windows XP to write to a UDF drive if I needed to.
View 4 Replies
ADVERTISEMENT
Apr 7, 2010
my school we want to print a magazine but we have problem with the format of the files. We need to create a sheet in A3 format from two sheets in A4 format. I was reading about the pdftk library but it doesn't do what i need.
View 4 Replies
View Related
Jan 17, 2010
I used a USB stick to make a bootable Slackware 13.0 USB.. uh, stick and now I need to use it to write stuff on -- can't seem to figure out how to format the thing so I can that
View 3 Replies
View Related
Jan 9, 2010
I put a larger drive in my netbook and stuck the old in an external USB enclosure so I could use it for backups. It had three partitions on it, ntfs and linux so I deleted all the partitions and created one big linux partition. Every time I write and exit fdisk the removable disk utility in KDE pops up and says ntfs drive. If I ignore it and try to formatit wants to use ntfs, if I fsck.ext3 it saysThe superblock could not be read or does not describe a correct ext2filesystem. If the deviceis valid and it really contains an ext2filesystem (and not swap or ufs or something else), then the superblockis corrupt, and you might try running e2fsck with an alternate superblock:e2fsck -b 8193 <device>2fsck -b 8193 doesn't work either.It seems like its caching something, I can print the partition table and see the one linux partition I created.
Code:
Disk /dev/sdb: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
[code]...
View 3 Replies
View Related
May 9, 2009
Right now I have a windows xp on my computer. I have only C: drive. I want to first format to c:, and then make a partition, and then install windows xp, and then install slackware 12.2. How can I format, and then make partitions of my 80gb disc space?
View 2 Replies
View Related
Apr 10, 2010
What's the command to know the stub domain(LAN) ip address in ip4 format?
View 7 Replies
View Related
Sep 11, 2010
I started writing compat32pkg late April. At the begining it was only for my personal use (and for the fun), and, it was only dedicated to automate updates of 32-bit part of the 32-bit compatibility layer (AlienBob's multilib). Afterward, I improved it, I added some features and now, it provides all the necessary for managing (converting,installing,upgrading,remove) of 32-bit part of the multilib, and others packages which are part of Slackware-32 like firefox, seamonkey, jre,. As I guess it could be usefull for others, I decided to publish it. So, if you want it, you can grab it at [URL]... But before that, I guess that you want to know a bit more about it. So, let's go. The installation of compat32pkg is done as for any Slackware package, using the command installpkg :
[code]...
If you want to convert packages to format compat32 only, you have to use compat32pkg in mode --convert instead of --install :
[code]...
The example below will give you the list of all available packages from the selected mirror and the status of the compat32 version (installed, not installed, update) of these packages......
View 12 Replies
View Related
Jan 31, 2010
My Canon S9000 wide format printer just died. I'm looking for a new one. Is there a wide format printer that works well with CUPs in Slackware?
View 8 Replies
View Related
Sep 15, 2010
I'm trying to format a device into XFS filesystem using mkfs command. Suppose I have a /dev/sda1 device with 4096 block and I want to format the whole thing, how can I execute the command? I keep getting various errors while executing it.
View 7 Replies
View Related
Jan 25, 2011
A little background first: Wireless card: Broadcom BCM4312 Wireless driver used: [URL].... (and slackbuild variation of the same)
GFX card: nVidia geForce 7150m I installed Slackware yesterday, along side my Ubuntu (yes yes, I use Ubuntu lol. I've been using it for about four years, I added Slackware to grub.cfg, using the OS prober, which added four menu entries. The first two caused kernel panic, the third worked, and I don't think I tried the fourth. (I'm pretty sure they were, in this order: generic, generic-smp, huge, and huge-smp). Using huge, I could not modprobe my wireless driver, I would get a "Invalid Module Format" error with wl, and when installing the nVidia drivers (from their site), I would get:
[code]....
I then booted using a menuentry my friend gave me, created my initrd, and everything worked fine, both graphics and wireless (mostly fine). So I upgraded to -current, kernel 2.6.35.10, and I started getting the same errors as before, 'Invalid Module format' and the same thing with the nVidia drivers, although this time, it happens regardless of if I use the generic kernel, or the huge kernel. I've done heaps of Google'ing around, and nothing I found worked.
View 8 Replies
View Related
Aug 5, 2010
If I set the clock to speak the time, I get this when it tries: starting kttsd failed. I've looked at the various posts, but haven't yet found an actual solution. I've tried to run kttsmgr, but for some reason the "run" dialog doesn't seem to do anything - no error, nothing. Type kttsmgr, press enter since there is not obvious other way to execute the command, and nothing happens.
Is this a module that does not come with KDE? And I give - I can't find time format anywhere. How do you change the clock that appears in the lower right corner to 12 hour instead of what appears to be default 24 hour? I don't see it in "Digital Clock Settings", and I don't see it in System Settings - Date & Time. This is a clean install of slackware 13.1, and whatever version of KDE comes with it.
View 3 Replies
View Related
Jun 1, 2011
13.37 default Xfce version panel clock not persisting custom format. Carry on. It would help if I didn't have two installations and I only configured the clock on one of them.
View 2 Replies
View Related
Feb 23, 2011
I like this linux distribution more than the others that i have used, because is more stable for my work. But there are some little problems that I can't solve. I'm using it with a laptop HP G60 and i can run OpenOffice, Mozilla and some other programs (python, grass, qgis) that used for work at the office, but when I go home and want to watch a movie with my girl, listen some music or any other simple task, i find a lot of little problems:
1. Adjust the bright of the screen, the Power Management Guidance don't do it and I really need it.
2. Can't play movies in VLC "No suitable decoder module. VLC does not support the audio or video format XVID. Unfortunately there is no way for you to fix this"
3. And today I can't play music because there is a message "KDE detected that one or more internal sound devices were removed" this is: Output HDA Intel, INTEL HDMI 0 (HDMI Audio Output)
I know maybe these problems are stupid but in windows is easier to fix them. I'm tired of search in google because i just find solved problems for Ubuntu and it takes a lot of time.
View 5 Replies
View Related
Mar 27, 2010
I was installing DYMOUM from [url]. "make" command is issuing this error:
Code:
Prior to this, ns-2.34 was working fine. Patches are applied very well.
I am in under fedora 9 and:
Code:
View 9 Replies
View Related
Mar 13, 2010
I'm having some troubles with nfsd in slackware-current. When I start the service, I get the following error messages: Quote:
WARNING: Error inserting sunrpc (/lib/modules/2.6.33-smp/kernel/net/sunrpc/sunrpc.ko): Invalid module format
WARNING: Error inserting auth_rpcgss (/lib/modules/2.6.33-smp/kernel/net/sunrpc/auth_gss/auth_rpcgss.ko): Invalid module format
WARNING: Error inserting lockd (/lib/modules/2.6.33-smp/kernel/fs/lockd/lockd.ko): Invalid module format
FATAL: Error inserting nfsd (/lib/modules/2.6.33-smp/kernel/fs/nfsd/nfsd.ko): Invalid module format
The mount fails from the clients with the error message: Quote: mount.nfs: access denied by server while mounting jupiter:/media/Backup A look at syslog from the server side gives: Quote: exportfs: exports duplicate symbol exportfs_decode_fh (owned by kernel) mountd[28198]: getfh failed: No such device kernel: exportfs: exports duplicate symbol exportfs_decode_fh (owned by kernel)
View 3 Replies
View Related
Jun 16, 2010
I am having a desktop motherboard of D31 model. In this i tried to load the RHEL4.2 but the required ahci driver is not there. So if anyone could specify me like whichfile-format file to be used while installing Linux OS, using the option boot:linux dd.
View 9 Replies
View Related
Oct 13, 2010
I notice in Nautilus file manager, if I right click on a directory, I can 'compress' that file or directory. clicking this provides options for different compression formats, but how do I know which one to use?Most of my files are data files, ie text. Though I do have photo/image folders and a music folde
View 6 Replies
View Related
Mar 17, 2011
How to deal with file not recognized: File format not recognized
View 2 Replies
View Related
May 17, 2010
I'm trying to convert a 3gp (mobile phone video) file to PAL DVD format (which is I believe MPEG2 video and one of a few audio choices, in an MPEG PS container). But while the file plays fine in mplayer and vlc, my efforts to convert it, using either VLC or devede, always seem to result in either the converted video being speed up (noticeably, we're talking twice as fast or so not 5%), or in the audio going mickey-mouse. How can I get the file converted correctly? Bearing in mind it needs to be PAL not NTSC (so a lot of stuff I might find online isn't going to work as-is)
View 1 Replies
View Related
Apr 3, 2011
I am trying to scan in a file which has the format of
Quote:
username:password
hello:world
right now my program says
Code:
Scanner fin = null;
try
{
fin = new Scanner(new FileReader("proj1/passwd.txt"));
[Code]...
How do i correctly use delimiter to take in only the strings on one line?
View 1 Replies
View Related
Feb 9, 2011
This works fine for most libraries:
Code:
$ objdump -f /usr/lib64/libm.so
/usr/lib64/libm.so: file format elf64-x86-64
[code]...
View 5 Replies
View Related
Jan 20, 2010
I have a PDF File here with upright ("portrait" format) pages, and I want to convert it so that each page gets "split" in the middle and becomes two wide ("landscape" format) pages.
Something like "print multiple pages on one page", only reversed
Is there any way to do such a thing with CUPS or something?
I have the source file ONLY in PDF Format
View 9 Replies
View Related
Jun 9, 2010
I'm having some problem converting an mpg file to avi. I did it with mencoder. The result was an avi file as I wanted but the image was like stretched vertically. Like this:
(The avi is on the left)
What can I do to convert it without the stretching?
View 1 Replies
View Related
Jul 8, 2010
I have received a file in CDF V2 format (.pub file extension).
Is there any software available to read this file in Linux (Ubuntu)?
View 2 Replies
View Related
Mar 6, 2011
Visibly my WM is not capable to read else than the format X11 cursors, so no way to CUR or ANI
Cheers
View 4 Replies
View Related
Feb 6, 2010
Quad processor, huge RAM, and more disk space than he knows how to use. So he decided to make it a tri-boot machine. He is a Mac 'biggot' (don't we all have our preferences?) but has been developing plugins for Cinema 4-D so he wanted to be able to span the spectrum.At any rate, we were chatting and he mentioned that he would like to be able to 'see' his Linux (he is using Ubuntu) drive while booted up in his Mac system.
View 4 Replies
View Related
Dec 27, 2010
I have an pdf file on my linux RHEL 4.7 machine. I can open that file but when i click on 'saveas' to save the file in 'Text' format there are no options i see there. I need to save the 'pdf' file to 'text' format. could anyone tell me how to save the pdf file to Text format. Iam using 'KDE'
View 6 Replies
View Related
Jul 7, 2011
I'm trying to write a small gnuplot script that takes a csv file of the format
[Code]...
plot "test.csv" using 1:($2/3600) "label_1,%lf,%lf" with lines title 'LABEL 1', I get the error "line 10: x range is invalid" If I set the xrange, i get "y range" is invalid, if I set that I get no vaild points. If i don't apply the command "set xdata time" then it works but the x axis is just displayed as integers and not a dates, which is my end goal
View 4 Replies
View Related
Dec 16, 2010
I made a string key-value mapping struct in C, and functions to add and remove entries. I would also like to write a function to read in this file format:
Code:
key: value
another: another value
[code]...
View 14 Replies
View Related
Dec 29, 2015
I'm not that new in Linux I've been using for years since 2010 mostly, and formatted a number of flash drives with allegedly fat32 fs however, this time I need to be sure I'm formatting it as fat32 for experimental reasons and I can't seen to find a mkfs.fat32, both vfat and fat are fat16 and I don't know what msdos does...
View 4 Replies
View Related