Slackware :: Running Hugin 2010.2.0 Work With Slack 13.1?
Nov 4, 2010
I am getting a problem to run hugin 2010.2.0 in Slackware 13.1. After I installed all require programs (I hope that), I run hugin, but the error message show that:
bash-4.1# hugin Fatal Error: Mismatch between the program and library build versions detected. The library used 2.8 (no debug,Unicode,compiler with C++ ABI 1002,wx containers,compatible with 2.6),
and your program used 2.8 (no debug,Unicode,compiler with C++ ABI 1002,wx containers,compatible with 2.4,compatible with 2.6)." Is there anyone know how to fix this problem?
View 3 Replies
ADVERTISEMENT
Jan 26, 2010
I have a computer with Debian installed. I would like to install Slack on another partition. Problem - this computer has no cd and won't boot from a USB stick when the hard drive is connected (go figure...disconnect hard drive, it boots from usb stick) no matter how I set the bios.
I have a copy of the Slack DVD copied to the local hard drive. I can configure lilo to boot from ubnkern on the slack dvd file set, but that just boots debian using that particular kernel - surprisingly it boots, but is not how to get to slack setup. Given the above setup and restrictions, how would I go about getting to slack setup? I'm kinda stuck here, trying to figure out what to do next.
View 9 Replies
View Related
Dec 27, 2010
I am trying to get PHP 5.3.4 into my webserver, running Slack 13.1 on a 32bit system. Basically, it's a success, but no matter what options I try, phar will not be installed
Code:
Generating phar.php
Generating phar.phar
PEAR package PHP_Archive not installed: generated phar will require PHP's phar extension be enabled.
clicommand.inc
directorygraphiterator.inc
[Code]...
View 1 Replies
View Related
Jun 9, 2010
I have myself a perfectly working slackware 13.1 64 on my pc (well, tbh I gotta solve some ati and kde compose issues),BUTI can get no joy when trying to make it work in friend's pc.The slackware 13.1 32 install runs ok. I can even log in and run a init 4 session on kde.But with no apparent reason hard crashes (completely frozen system) hit the system aleatory (never last more than 5 minutes)
View 14 Replies
View Related
Mar 21, 2010
I am playing with SalixOS which is supposed to be entirely compatible with Slack. I've never put Slack proper on this laptop. It's run Ubuntu and Mandriva both and the volume wheel always works. It does not seem to be recognized in Salix. I figure the fix will be the same in Salix as Slackware so I'm asking here. The laptop is an A205 Toshiba Satellite.
View 2 Replies
View Related
Apr 18, 2011
I have just reinstalled slackware on my old p4 3.2 box clean install formatted hard drive no other packages installed.is there something seriously changed from slack 10 to slack 13.1 ?? or do i suffer from C.R.S ( cant remember s***)
View 5 Replies
View Related
Nov 10, 2010
I don't find a lot of information available regarding a service called pipe_server.When I send UDP packets without specifically a source or destination port, the packet capture from the machine, I send the UDP packet shows the following:
src port: pipe_server(2010)
dest port: pipe_server(2010)
More information related how send packets : I use raw sockets. I don't specify ports.Does the kernel fill the src and dest ports for me? Do all machines have a port 2010 that will listen for UDP packets?
View 3 Replies
View Related
Apr 19, 2011
running ALCATEL USB modem HSPA on mandriva 2010?
View 12 Replies
View Related
Jul 23, 2010
have very limited experience with command line interfaces in Mac OSX (the OS that I'm used to). Please pitch any replies at the appropriate level My problem:I've installed Mandriva Spring 2010 Free in a Parallels Desktop 5 VM running inside Mac OS X 10.6 (Snow Leopard).Parallels has a set of tools that I need to install to make the VM play nicely with my host OS. It is here that I'm running into problems. When trying to install Parallels Tools I get a warning that 'Some components needed for parallels tools installation are missing in your system;. I'm offered the chance to download them automatically. This download always fails and I'm told that I need to download 'kernel sources' manually and try again.
After some considerable research (remember I'm TOTALLY new to Linux) I found out what this means and have installed what I believe are the correct files using the 'install and remove software' window. As I understand it, I need to download the source files of the kernel I am using (exactly the same version), so I now have:kernel-desktop-latest - Version 2.6.33.5ernel-source-latest - Version 2.6.33.5These are 'virtual rpm's that make sure i always have the latest kernel versions, which as I understand it means that I should have the latest kernel and corresponding kernels sources... but I still get the damn error message telling me to install 'kernel sources' when I try to run the parallels tools installer.
View 3 Replies
View Related
May 2, 2011
I am trying to get TightVNC to work on my laptop running slackware 13.1 32Bit but I am having a problem. Basically, tightvnc starts correctly, but when I login with the vncviewer from a remote machine, I see this error message on the virtual desktop:
Code:
Unable to contact settings server. Did not receive a reply.Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. Then I click "Close" and another error message appears:
[Code]...
View 5 Replies
View Related
Mar 10, 2010
I just used sbopkg to download and compile Digikam 1.0.0 from slackbuilds.org. But compilation stops with an error regarding "png loader". I guess this has to do with the libpng issue mentioned in the changelog.
Nevertheless: Has anyone been able to compile Digikam on the latest Slackware64-current?
View 10 Replies
View Related
Apr 18, 2011
I've install Slackware 13.1 and i cannot shutdown my PC. The shut down process stop while trying to run PCMCIA module.
This is the first time that happens.
From Hardware point of view , i didn't do anything at all (if that helps).
View 5 Replies
View Related
Dec 23, 2010
Anyone upgraded php to 5.3.x in slack 13.1?
Could you please share the slackbuild?
View 7 Replies
View Related
Jul 2, 2011
I installed a slack 13.7 on an old laptop. KDE was set as default desktop. then I login and run startx and I saw KDE first screen display. after that I saw blank screen with a mouse on it. Then it stayed there and it seems try read some in my harddisk since the persistent harddisk light.
View 3 Replies
View Related
May 2, 2011
When I try to put slackware to sleep or have it hibernate the system simply sits with a black screen. Normally it would do this for a short period of time immediately before the actual sleep state (screen powered off, croissant light on) is entered, but currently it does it indefinitely. My sleep USED to work just fine, it broke after some unclean shutdown or another, basically I just want to know what I can try resetting to try to get it back to normal.
Slackware64 13.1, running on thinkpad X61.
EDIT: Of course the second I make the post I think of trying to sleep/hibernate from the command line instead of through X/GDM (Gnome SlackBuild). That works.
View 1 Replies
View Related
May 2, 2011
I have some doubts about the official Pat's upgrading procedure. In the UPGRADE.TXT file, one of the stepts says:
Code:
upgradepkg --install-new *.t?z What does --install-new mean? Pkgs I have no installed on my 13.1 will be installed on the 13.37 upgrade? For example, I did not installed KDE on 13.1. Will be installed when upgrade? - What about third party pkgs? Slacky, SlackBuilds.org, compiled by myself. Should I remove them before upgrading slack?
View 10 Replies
View Related
Sep 1, 2010
Does it mean that a 64 bit version is not multi-core?
View 11 Replies
View Related
Jun 26, 2010
I'm running 13.1 x86_64 on my laptop. Yesterday the first batch of security updates were released, which I installed without problems; however, I'm bugged by the fact that that the Firefox packages for 13.0 and 13.1 have the same name. (see below)
Updated package for Slackware x86_64 13.0:[URL].._slack13.0.txz Updated package for Slackware x86_64 13.1:[URL]..._slack13.0.txz They aren't the same file--their listed md5 hashes on ftp.slackware.com differ, plus I downloaded both packages and confirmed that both check against their respective listed hashes.
So...I suppose my question is this: Is this simply a mistake in naming, and if so, could it possibly produce a problem somehow?
View 8 Replies
View Related
Apr 1, 2010
I just tried to build Digikam 1.2.0 using the SlackBuild script from SlackBuilds.org for version 1.0.0. While Lensfun 0.2.5 and Kipi-Plugins 1.2.0 compiled and installed without problems, the Digikam build stops at 97%. Here's the log:
[Code]...
View 8 Replies
View Related
Dec 23, 2009
I have a XPS 1530 and when I type
lsusb
[code]
It seems to be that the camera is recognized by the OS but it is not working when I try to use it in skype or in EVO.
View 1 Replies
View Related
Mar 21, 2011
Has anyone here succeeded in getting armed slack running on a consumer kirkwood device .ie. one without serial console? I have a tonido plug that I want to liberate. By default the plug boots first from the external usb, so I would only need to set up / on the first partition. I would be very interested to know if someone had managed to install slack to the internal nand without bricking it.
View 9 Replies
View Related
Dec 18, 2010
I downloaded Qt SDK file (530 MB and file is ok ) qt-sdk-linux-x86-opensource-2010.05.1.bin, I type in console ( slackware ) like in manual for installation at site
Quote:
chmod u+x qt-sdk-linux-x86-opensource-2010.05.1.bin
but when I type second command for installation
Quote:
./qt-sdk-linux-x86-opensource-2010.05.1.bin
I get error message
Quote: bash: ./qt-sdk-linux-x86_64-opensource-2010.05.1.bin: cannot execute binary file How to install ?
View 7 Replies
View Related
Jan 30, 2010
I compiled it from source, i installed it via slackbuild but it didn't work. When i go imlib-config --version it shows me the old one, and when i try to install giblib it tells me that imlib2 is not installed. I watched the output from the installing of imlib2 and i realized something's wrong: there are several suspicious warnings :
[Code]...
View 10 Replies
View Related
Feb 8, 2011
I don't know if i'm doing anything wrong but, to change the bootsplash picture its just change the slack.bmp in lilo.conf and reboot?
View 6 Replies
View Related
Mar 18, 2010
my problem, I have Slackware 13 dual booted with vista on a dell 1545 2 ghz 2gig ram. to these forums I have gotten everything working except my creative zen vision M 30g. I have tried alll the suggestions posted here and other places on the net. Here is my output from lsusb.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 002: ID 046d:c018 Logitech, Inc. Optical Wheel Mouse
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[Code]...
any way i can transfer files back and forth to this would be great since it does not work in vista either. and I am pretty sure 99.9% that I have all the libmtp, libnjb, and whatever other libs are needed installed but in gnomad it says no devices found on USB hub. I hope this is enough info and someone out there has the trick or maybe I am missing something obvious.
View 2 Replies
View Related
Jul 9, 2010
i installed compiz fusion on my slack 13.1 i installed in the good order all the packages nevetheless when i try to use DBUS in command line i don't have any response from compiz
here is one example
Code:
dbus-send --type=method_call --dest=org.freedesktop.compiz /org/freedesktop/compiz/switcher/allscreens/next org.freedesktop.compiz.activate string:'root' int32:`xwininfo -root | grep id: | awk '{ print $4 }'`but no reaction .what can i check to have a functionnal DBUS ?
View 3 Replies
View Related
Feb 26, 2010
I have downloaded the packages from Slackbulids and installed also the required packages from slacky.eu but still it says that probably pyqt is not installed. I have installet latest Sip and latest pyqt ver 4.
View 1 Replies
View Related
Apr 30, 2010
i know that there is a reset button on the back but after reset i dont know what to do with it. right now i m using pppoe connection which only works in windows and bt4 and i want to make it run in slack 'cause now slack is my main os(66hr since i switched to it :0) so i want to configure the modem in a way that i work in slack. and i m dumb about PPP/TCIP/DHCP and btw i like "the" slack
View 7 Replies
View Related
Jul 6, 2011
I like GNOME. So, I want to install gnome 3 as my desktop environment.
View 9 Replies
View Related
May 31, 2011
I installed slackware on my laptop last night, :-) very happy. Can't wait to learn more about linux and even computers in general. I've already learnt heaps since entering the alternative operating system world. Anyways, i've got xfce up and running with slack now, created a new user 4 my self. And now i'd like to get some updates and stuff, but i need to use my mobile broadband. It's a telsta dongle If that changes the circumstances. How would i go about setting this up?
View 2 Replies
View Related
