Is simply adding "alias net-pf-10 off" to modprobe.conf enough to keep IPv6 completely dead? Should I comment out the IPv6 loopback address in /etc/hosts or anything like that?
View 9 RepliesI just finished setting up my slack machine as a home server (printers & files) and I noticed that I have an IPv6 address (from ifconfig)... I didn't know I did. I used to work in tech support and when a windows or OSx machine didn't connect properly on a LAN, disabling IPV6 was a common troubleshooting step. Is there a way to easily turn inet6 connectivity off/on in Slackware? (I want to keep the ability to get an IPv6, we will all use those in the future)
View 2 Replies View RelatedI've got 5 users who share a bunch of virtual Windows XP guests via VRDP (VirtualBox RDP access), and I'm having some problems with managing their NumLock state. They all use rdesktop to access the Windows XP machines. This works very well, as long as all of them have NumLock enabled. If one of them disables it by mistake, and then logs into one of the Windows XP machines, NumLock is disabled and some of the programs they use start to act really weird. This is causing us some grief.
So I'd like to be able to enable NumLock on all the computers (they are all running Slackware 12.2) before X, while X runs and while KDE is running. And when NumLock is enabled for the entire system, thenI'd like to remove the ability to disable NumLock altogether. NumLock should always be enabled for these users, no matter what. It would be really nice if Linux/X/KDE/whatever just honored the BIOS setting, but I haven't been able to figure out how to do that. Oh, and I'd really like if the NumLock LED was ON, so everybody are made aware of the fact that they have NumLock turned on.
ps. I've tried remapping the keys on the numeric pad with xmodmap, but that doesn't solve the problem. The actual NumLock state must be set to avoid problems with the troubled Windows programs.
I was wondering the proper way to disable phpmyadmin.
View 1 Replies View RelatedI am experiencing very slow internet speed while downloading files from internet. Although torrent (KTorrent) download speeds are okay. I am using 'rekonq' Web Browser. Konqueror is slower than this and Firefox is the slowest. Thats why I have uninstalled Firefox from my Suse 11.3 KDE. I went through the guides mentioned here:
Disable IPv6 But the images shown here in the first post (by caf4926) [URL] have slightly different configuration from my computer. (My account does not allow me to post attachments). In the pic 2, Do we have to select the option: "User Controlled with NetworkManager" before unchecking the Enable IPv6 option.
Okay so on WebUpd8 website, (url), I found a way to disable IPv6 and I was hoping to get a little more of an understanding of if I should or not from comments there, but unfortunately I haven't gotten enough to say let's do that. So I figured I might get a better understanding on here.
I am not very familiar with IPv6, but to my understanding its a newer thing that's rarely found currently with ISPs, but can be a security issue now.
Anyone know how to disable IPv6 but still use IPv4?
View 6 Replies View RelatedI have a host and typing ifconfig I get:
eth0 Link encap:Ethernet HWaddr 00:0E:7F:4F:E4:09
inet addr:130.130.9.9 Bcast:130.130.255.255 Mask:255.255.0.0
inet6 addr: fe80::20e:7fff:fe4f:e409/64 Scope:Link
[code]...
and to do a test i want to disable or delete the ipv6 address, but mainteining the other configured parameters. Looking on the ifcfg config file I have
DEVICE=eth0
BOOTPROTO=static
BROADCAST=130.130.255.255
[code]....
and nothing about IPv6... Then, using ifdown-ipv6 could i remove only the ipv6 address?
I have tried to disable the ipv6 support in ubuntu 9.04 32bit but the /etc/modprobe.d/aliases does not exist so I can't disable the suport as sugested for the previews versions. I need to disable it becouse it is pounding a total maihem in my vamware machines.
View 7 Replies View RelatedHowto disable IPV6 in Lenny?
I added this line:alias ipv6 off in /etc/modprobe.d/aliases:# cat /etc/modprobe.d/aliases
# These are the standard aliases for devices and kernel drivers.
# This file does not need to be modified.
#
# Please file a bug against module-init-tools if a package needs a entry
# in this file.
[Code]....
alias ipv6 offbut howto check after restart if ipv6 was loaded or not?
does opensuse 11.2 come with IPv6 enabled by default? where in the gnome gui can i access these settings?
Edit-i went into the gnome network manager applet and i cant find any IPv6 settings for any of my used connections-ethernet, wireless and VPN connections all seem to only IPv4. Can anyone else confirm that opensuse 11.2 uses only IPv4 on its network connections?
have had a problem with my ubuntu system recently in that it will only let me connect to the Internet through Firefox if I switch network.dns.disableIPv6 on. How do I do the equivalent in Ubuntu to enable me to use Ephiphany etc which are not working anymore
View 2 Replies View RelatedWhen I run OpenVPN server - tap0 adapter, it breakes Teredo(Miredo) IPv6 address down. I dont need IPv6 on OpenVPN, so is there any way to disable IPv6 on tap0 completely?
View 2 Replies View RelatedI have installed bind with yum install bind bind-chroot.I am having query timeouts due to no ipv6 connectivity.Is there a way to re-compile and not loose the chroot structure?Or is there another way to disable ipv6 lookups?Example of issue resulting in ipv4 query timeout:
30-Dec-2010 17:52:03.226 client x.x.x.x#53593: view internal: query: paypal.com.cms.local IN A +
30-Dec-2010 17:52:03.227 client x.x.x.x#53594: view internal: query: paypal.com.cms.local IN AAAA +
30-Dec-2010 17:52:03.228 client x.x.x.x#53595: view internal: query: paypal.com IN A +
[code]....
Now that IPv6 is becoming more and more common, I found the need to disable IPv6 on some interfaces but have it enabled on other. I found that /proc/sys/net/ipv6/conf/*/disable_ipv6 does exactly that. I am now wondering if anybody knows, why are networking scripts so counterintuitive. /etc/sysconfig/network has an option:
NETWORKING_IPV6=yes
All this option does is disable some ipv6 services (dhcpv6...), it does not disable IPv6 in whole (as one would assume...that's why you had to disable it with module parameters). Searching for more IP6 related config option, one can find that /etc/sysconfig/network-scripts/ifcfg-* scripts can contain:
IPV6INIT=yes
Again, this option does not disable IPv6 protocol on the interface, it just skips running ifup-ipv6/ifdown-ipv6 scripts. I added a /sbin/ifup-pre-local. Now, this script runs before ethX entries are created (other scripts run when it's already too late) in /proc directory, so it modifies default values which are then used after those entries are created:
#!/bin/bash
#
[ -f "/etc/sysconfig/network-scripts/$1" ] && . /etc/sysconfig/network-scripts/$1
[code]...
I set up a static IPv6 address and a gateway in /etc/network/interfaces. However, a bad router in my network environment alway send wrong ICMP router discovery messages to me. So I have got extra (wrong) IPv6 address and gateway, and the routing is confused. On Windows Servers, I can use "netsh interface ipv6 set interface "Local Area Connection" routerdiscovery=disable" to disable ICMP router discovery. But I don't know how to disable it on Ubuntu 9.10. How could I disable ICMP router discovery for IPv6?
View 4 Replies View RelatedWhen I go out of town I normally take my Acer Netbook to travel light. I ran into a problem over the weekend which I have seen before and couldn't find the cause. I used the wifi at the house I was staying at and could connect to the router via Wicd and ping outside IP addresses, however, I could not connect to any websites with Iceweasel or Midori. I receive the generic error that the browser is unable to connect. Now that I am back at my house I cannot repeat the problem, but have found a couple threads about disabling ipv6 protocol. The symptoms sound like a browser setting, but I couldn't find any settings that looked unusual.
View 2 Replies View RelatedI have upgraded to version 11.04 and I only use Ubuntu classic - do not like Unity at all.
I think in previous version there was an option in one of the System->Preferences->Appearance dialogs to enable 3D effects partly fully or not at all for GNOME 2. However, I cannot find this dialog any more in version 11.04. Where has it gone?
I would like to make sure that all 3D mumbo-jumbo is completely disabled with ubuntu classic.
How to completely disable hibernation in Debian Squeeze (with KDE). If it's impossible to disable it for whole system, I want to hide button in KDE menu.
View 3 Replies View RelatedIs there a way to disable password authentication completely? The command line is the following:
ssh -o KbdInteractiveAuthentication=no -o PasswordAuthentication=no machine"
it STILL asks for a password. Of course I would like to do this without touching the server, if possible.
Ive searched forums and read syslog dhcpd man pages, but cannot figure out how to completely disable dhcpd logging :S
View 6 Replies View RelatedWhat is the easiest and proper way to get security updates for slackware.
View 13 Replies View RelatedIs there possibility to disable ipv6 protocol for given interface? More info:
1. I have PC with 3 Ethernet cards. Two of them up(eth0, eth1), other is down(eth2).
2. eth0 is connected to LAN, so it configured to obtain IPv4 address via DHCP(works)
3. eth1 is connected directly to other Ethernet card in other PC and used by packet generator(tcpreplay utility) in debug purposes. ipv4 is not configured on this interface.
4. I have rebuilt kernel with build-in ipv6 support, because it required to work in LAN with some other PC's.
5. Now all my interfaces got own link-local ipv6 address(like fe80::xxxx:yyyy:zzzz:qqqq )
How to get rid ipv6 on my eth1 debugging-interface? Any unauthorised packet send thru interface wastes whole debugging session. "ifconfig eth1 del " doesn't helps. Can it be achieved using tools available in slackware 12.2 or at least slackware 13.1?
How can I disable login sounds in maverick without completely disabling the ubuntu sound theme?I just want it to not make sounds on startuplogin but still make the ubuntu sounds when new mail is received, etc.
View 9 Replies View RelatedI will install Slackware 13.1 on my desktop in 50 GB of disk space but I'm not sure about the proper size for the partitions "/" and "/ usr / local". I want to use most of the space for "/ home" partition, so I can keep my data when I upgrade to a newer version (right?)
View 4 Replies View RelatedI have Brother HL2250N. This worked out of the box with 13.0 using the Brother drivers. I also have a Brother MFC-7820N which works fine in 13.0 and 13.37. In 13.37 the testpage from CUPS prints fine. However when I try to print anything from kate or libreoffice I just get pages and pages of text starting with
[code]...
I assume this the post script file that is printing out. How do I get this to print properly?
On my desktop computer (now running the very impressive Slackware64 13.37 and generic kernel), I've got what Alsa considers 4 different sound devices:
Logitech USB headset
Logitech QuickCam Pro 9000 with built-in microphone
ATI HD48x0 audio (which uses the HDA-Intel driver) on my graphics card
Intel 82801JI audio (also using HDA-Intel driver) on my motherboard
When I run alsaconf, it picks up the ATI audio only (which is fine). Later running alsamixer (or any other mixer) all 4 are visible. The issue is that I really would like the ATI audo to be in position 0. Previous to Slackware 13.37, setting up the device positions in /etc/modprobe.d/sound usually did the trick. However, that is now being ignored and one the USB devices are being put in position 0 regardless of what is in sound.conf. This is driving me nuts as a lot of software simply use the default audio device, which I would like to be my speakers, but is now my USB headset.
All of the googling I've done points towards messing with the /etc/modprobe.d/sound.conf file, but as I said, that is being ignored. Is there a more 13.37 way to have ALSA order the audio devices the way I want?
Support for ipv6 keeps being put into the kernel and now into browsers.I blacklisted ipv6 in Slackware and that solved the slow internet response until I updated to the latest Opera and Firefox browsers. Both were horribly slow again. Firefox could be reconfigured to kill ipv6 by running about:config as a url and disabling ipv6.
The new Opera 11 is different. I can't find any config to disable ipv6. Does anyone have an idea?I reverted to Opera 10.11 in order to have zippy internet access again, and not "dialup modem" speeds.
I just received my Slackware 13.1 & the 'Official Guide to Slackware Linux' book. I know that there is a big learning curve to use Slackware and that is why I purchased it - according to Distrowatch, "...if you learn Slackware, you learn Linux!" But, while I am 'learning Linux', I would still like to have a linux distro installed that would be more of a 'no-brainer'.
So the question is, which distro should I install first, Slackware or say, OpenSuse? I know that if I were going to dual-boot with XP, that XP should be installed first - does order matter for 2 linux distros too? Also, are there any points to remember to do during the installation processes so that I end up with a working, dual-boot computer?
I used to play with gw6c ( a client for tunnel broker ) It works well with fedora9 , fedora 10, but not with leonidas. my rpm is gw6c-6.0-0.4.beta4.fc9.i386.rpm ( a little old!) when I tried to install i have got this: libcrypto.so.7 est ncessaire pou w6c-6.0-0.4.beta4.fc9.i386 I try to make a soft link to libcrypto.so.0.9.8k, but nothing; The question :-Is there a solution for that pb - did you know a better client for non native ipv6 connectivity?
View 2 Replies View Related