How do I uninstall unwanted applications? Is there a log of all installed applications? When I ran setup and chose my packages, for KDE, and I am sure others the options came in bundles, ie KDEbase-version... Is there a way to see all package contents to remove individual programs?
View 5 RepliesKDE 3.5.4Kernel 2.6.17.13Slack 11A few weeks ago, my system locked up and I had to do a hard reboot (hold down power button). When I powered back on, the programs (KDE System Guard, Konsole window, MythFrontEnd) that were running at the time of the lockup appeared again. I exited System Guard and the Konsole window and then restarted normally. However, they keep appearing in the same spot when I log in to KDE. I looked through some logs in /var/log, but I don't see anything I haven't seen before.I deleted the /home/myuser/.kde/cache-hostname folder and its contents while in single-user mode, but that had no impact
View 4 Replies View RelatedI am writing a script using man2html and some man pages cause man2html to crash ie
Code:
gunzip --to-stdout /usr/man/man7/groff_hdtbl.7.gz |man2html -r
will cause a glibc crashdump like so
[code]....
installed a couple things with Winetricks and it told me to uninstall the Samyak/Oriya font because it causes problems with some .net applications. It told me to use
Code:
But I'm not sure if I should install dpkg specifically to do this, or if there's a native slackware way to remove this.
I'm dualbooting Slackware and Gentoo on my homeserver. Some weeks ago I built grub with a slackbuild-script, it was the new version of grub but it did not install properly. Since then I could only boot Slackware but not Gentoo. Today I tried to install grub from the Gentoo-partition (I chrooted to Gentoo). This did not work due to an errormessage of grub that "stage1 could not be read".
Afterwards I tried to install lilo, this failed at first attempt, but the with some warnings lilo executed. When I rebooted after the lilo-install, I had grub again at the bootscreen without the option to boot Gentoo. I decided that I have to clean the mbr of /dev/sda and found a solution with the dd command. Here my
[Code]...
Fortunately I have a second disk /dev/sdb in the server and have now installed the bootloader on the mbr of /dev/sdb. But in the long run I want to change this.
how to uninstall packages via the program name? For example, if I want to uninstall the program "KWordQuiz" then I would usually have to use the command removepkg -package name But unfortunately I have a fresh install and want to get rid of a lot of programs. So instead of using the package repository and finding each package which would take days (maybe) and removing them individually I'd like to remove a program and all its supporting packages. I am probably just rambling on... Umm, so yes is there a way, or do I have to suck it up and sit at the keyboard for days.
View 8 Replies View RelatedI can't track down..On most of my Slackware -current installs (I have 6 installs altogether) I can no longer get conky to adjust via .conkyrc Conky from SlackBuilds The problem is for some reason it's stuck at top of screen, with the whole upper-half not visible off screen.. I have tried adjusting .conkyrc, tried uninstalling/reinstalling tried adjusting how it starts in .fluxbox/startup all to no avail. I am starting it with either
conky -d
conky &
conky -d &
all the same result. Somehow I "fixed" one of the installs, and tried the same "fix" on the others and it didn't work..I am also trying to start either fbpanel or lxpanel either before or after conky...same results Is there another app (not gkrellm) that will do same as conky?
I am looking for a kind of update-alternatives for Slackware to set default applications. Currently the reason is I want to use "display" as the picture viewer in Midnight Commander. Display is a part of ImageMagick. "MC" keeps looking for something called "GQVIEW", which is not installed, and is now known as "Geeqie". I removed the Geeqie pkg to see if it would help MC use Display. I also added a line in .bashrc like "VIEWER=/usr/bin/display" to see if it would force the issue.
View 15 Replies View RelatedI download kbasic from [url] then extract file because is bin not source i try to run kbide application and Failure and i try Change the permission of the file
Quote:
I have kde 4.5 and my install of slackware is current 2010-8
And other problem i cant run gambas2
The output of bash is
Quote:
And the install is ok and md5
If Slackware didn't include KDE:
1) Which KDE apps would you miss?
2) Which alternatives for these apps would you suggest?
Proposing GNOME apps instead is considered bad practice, as there is no sign of GNOME being re-included in Slackware in a foreseeable future.
When I try to run thunar,for example, as root i receive a :
Code:
bash-4.1# thunar
No protocol specified
[code]...
After reading quite a lot about this distro, I have come to know that Slackware doesn't provide tools for managing dependencies. So how do I take care of dependencies?
If there's already a thread regarding this, please redirect me to that particular thread.
Is it possible to run a web browser in a highly restricted chroot environment? If so, what is the best way to do it?
View 2 Replies View RelatedI am taking a parallel computing course at school and will be required to write programs using MPI soon. All of the school servers have Lam/MPI installed on them but I can only find OpenMPI slackbuild scripts. If I install OpenMPI on my computer and do my development on my own machine, will I have much trouble when it's compiled/run on the school servers?
View 5 Replies View RelatedI'm looking for a tool to control network bandwidth (per application i.e. totem), something like trickle (a userspace bandwidth shaper).Trickle is a bit outdated, latest ver. 1.0.6 (2003), and it won't compile under -current. There's a slackbuild available, dated 2004.
Quote:
$ make
gcc -DHAVE_CONFIG_H -I. -I. -I. -Wall -Icompat -g -O2 -c trickle.c
[code]...
I installed the proprietary fglrx drivers, and they didn't really do anything other than break half my software or make it slower. Now the first time I installed the .run binary by just doing 'sh ati-driver-installer-10-3-x86.x86_64'. Then, after Google'ing on how to remove it, I just did 'rmmod fglrx' outside of X and deleted all the kernel modules manually. And that seemed to fix a few things, but not all.
Then I found another thread saying just turn the .run into a pkg, do installpkg, and removepkg, and I did that as well. It fixed most of the problems and seems to have deleted all traces of the fglrx ATI driver.Now, though, anytime I try to run anything 3D, like glxgears, instead of just giving me a segmentation fault, it says:
Code:
glxgears: error while loading shared libraries: libatiuki.so.1: cannot open shared object file: No such file or directory I've Google'd but nothing related came up, Also I can post my xorg.conf file but I don't think that is the cause of this, because I ran 'xorgsetup' and messed around with it some, and it was doing this even before I ran 'xorgsetup' and after I ran it / modified it.
I am not trying to start a flame war. Let me say that I like Slackware and it is my main distro. However as someone who wants to try new things in Linux, I was wondering if there is a similar distro like Slackware? Something that uses applications without modification, simple bsd style, and same philosophy? I could think of Crux linux, but its installer is not my style. Any other preference?
View 14 Replies View RelatedI'd like to use one of my machines for all kinds of audio applications, including home recording (MIDI and analog). Now I am looking for a suitable audio/recording interface. I've searched the web, but didn't find a lot of current information. Most of what I found is outdated.
RME Hammerfall seems to be brilliant, but exceeds my budget. MAudio 2496 seems to be excellent in quality, but a bit limited in connectivity. ESI Juli@ appears to be even better, but the parts exposed to the outside of the computer case don't seem to be overly robust..And that seem already to be all PCI devices supported by ALSA for my purpose! (MAudio Audiophile 192, e. g., is reported not to work that well).
Now I thought, I could avoid all this hassle by choosing a USB device. However, situation seems to be even worse. Terratec DMX 6Fire USB is not supported, at all, MAudio Fast Track Pro is limited to USB 1.1 and 48kHz (I want 96 kHz, at least!) only and requires a patch for 24 Bits. And so on...
I have a very strange problem with Phonon. I am running slackware-current with KDE-4.3.4 on an old PC with CS46xx sound chip. The Phonon backend is Xine. The system is newly installed.
Applications which use the Phonon layer are silent or muted. I am not able to hear anything. Affected is for example Amarok, Dragon Player, Minitube or the Kde Notification system (when playing sounds). What makes the situation strange is the fact, that everything looks pretty fine:
Alsa works excellent and is configured correctly.
KMixer affects the alsa system settings as expected.
Mplayer works, Xine works, mpg321 works.
Inside Kde's system settings -> Multimedia, the Test button works and i can hear the Kde start up melody.
Inside Kde's system settings -> Notifications, the play button for sound events works and plays the given sounds.
The problem appears with a newly created user account, too.
What i also tried was to compile [url]. The output looks ok to me, too. No errors and ogg and mp3 support is available.
Last but not least i tried the Python coding tutorial at [url]. The fact, that this works, unsettles me totally.
I have a problem with the radeon driver and running 3d applications (namely glxgears and google-earth). Basically the 3d application is competing to stay on top of other windows. The problem is present with all windows and balloon pop ups such as those that pop up when I click on icons in google earth; The globe will just try to get on top again and I won't be able to see what I clicked on (like the panoramio pictures).
I have had this problem with kernels huge-smp of slackware13.1, custom on 2.6.33.4 kernel, and custom 26.35.4 and 2.6.35.7 kernels. My kernel config stuff (related to radeon) are:
[Code]....
I am using Slackware 12.2 on my laptop
compaq presario V2356AP
Intel centrino 1.6ghz
1 GB Ram
and Slackware is installed on 16gb partition with 10 gb free now.When i installed it was fine over a few days slackware is giving me high response time. while playing videos it is getting stuck firefox is giving bad responses and even konqueror.I heard that slackware is one of the fastest linux and is old hardware friendly right
A big catastroph in my computer,I'm running slackware current Yesterday after finding a security update for thunderbird 3.1.4 in my mail, as I've suscribed to receive newsletter.So I run the slackpkg update and then a slackpkg upgrade-all. During this process I had a message asking me what to do with duplicated libraries of old versions for :
firefox
thunderbird
seamonkey
R Remove
S Skip
B Blacklist
So I decided to remove old versions. Since that all shortcuts for these applications have disapeared from my desktop. the commands for these programms don't work. And the menus have gone from the kickoff application launcher.
I did a clean installation of KDE 4.4 Alien bob`s packages and when I open the dolphin, for example, appears this error:
The icons and directories are all on blank...
I've tried some more recent builds of Libre Office from Alien Bob and I'm still getting crashes when I try to dock the Navigator panel on the left side of the window for any of the office applications.
Details are in this post. More specifically, I'm running libreoffice-3.2.99.3-i486 from Eric. When I run 'oowriter' (Libreoffice Writer) from the command line, and then try to dock the navigator panel, I get this message after the crash:
Code:
Gtk-Message: (for origin information, set GTK_DEBUG): failed to
retrieve property `GtkOptionMenu::indicator-size' of type
`GtkRequisition' from rc file value "0" of type `glong'
Gtk-Message: (for origin information, set GTK_DEBUG): failed to
retrieve property `GtkOptionMenu::indicator-spacing' of type
`GtkBorder' from rc file value "0" of type `glong'
I don't know if it happens with the 64-bit version or not. I haven't tried it yet. I'm no stranger to submitting bug reports, but I haven't looked closely at Libreoffice's bug submitting procedures. I'll do that soon.
I've got a few processes running on my machine called simply '3'. I don't know what they are or where they have come from but all I know is that I don't want them there. I have to periodically type killall 3. This is the output from top, all processes listed are of this '3' type.
4804 tom 20 0 3356 752 656 R 2.3 0.0 3:40.75 3
4837 tom 20 0 3356 748 656 R 2.3 0.0 2:55.98 3
4844 tom 20 0 3356 752 656 R 2.3 0.0 2:50.06 3
[code]....
How do I get rid of unwanted things on my desktop
View 3 Replies View RelatedWhen i log into to a non root(user) mode, i am always greeted by a small terminal window before the desktop starts up. Also, after desktop starts a new window opens which displays the contents of my windows desktop.
I am unable to stop this from happening. I am running Ubuntu 10.10(32 bit) along with Windows 7(64 bit) on different partitions.
I noticed after uninstalling Firefox that the folder is still listed in the files/etc ... how do I delete these files?
/etc/firefox
/etc/firefox-3.0
/etc/forefox-3.5
I have successfully build .deb im my box and it is running well. But during the debuild process I got followingdpkg-shlibdeps: warning: dependency on libatk-1.0.so.0 could be avoided if "debian/retrovol/usr/bin/retrovol" were not uselessly linked against it (they use none of its symbols).
dpkg-shlibdeps: warning: dependency on libdl.so.2 could be avoided if "debian/retrovol/usr/bin/retrovol" were
[code]....
I've just installed Squeeze with KDE. I was wondering what is the best way to remove some unwanted apps without breaking everything (I want to get rid of Kopete and a few other apps like Dragon Player as I don't use them)?
I tried to: apt-get remove kopete
but it said it wanted to remove a whole bunch of other stuff as well. (I'm a recent Fedora convert).