Sorry if this has been answered already, I've searched through like 20 different threads though and haven't found anything on it...
So I already have Windows 7 and LinuxMint installed, when I install Slackware can I use the same /boot partition that LinuxMint uses, or do I need to create a separate one?
Everything is installed and setup on my system, but when I setup my partitions I chose my Windows partition to be bootable. Can I just use cfdisk to toggle the bootable flag so my linux partition is bootable and rewrite the partition table?
View 2 Replies View RelatedI have a system which previously have 3 OS installed on one physical HDD; WinXP on sda1, Win7 on sda2 and Slackware linux on sda3. Lilo is used as the boot loader.
Recently I bought another HDD and decided to reinstalled my Win7 on it and I use GParted to move Slackware to the original Win7 slot on my first HDD so now my Slackware partition has been move from sda3 to sda2.
I modified the /etc/lilo.conf file so that it reflects the new Slackware partition and run lilo to installed it.
The lilo installed correctly I can boot into WinXP and Win7 without problem but when I try to boot into Slackware, it fail at the root filesystem check, apparently the e2fsck still try to check sda3.
Is there anything that I can do to correct the problem without having to reinstall Linux?
Got tired of long waits for fsck on very large partitions.Here's a script to fsck selected partitions every 'N' shutdowns. No more boot delays for fsck (unless something is really wrong
Update1: On my system '/usr/libexec/gam_server' (gamin component used by xfce) prevented /home from being unmounted. I changed
Code:
[code]...
When I run lilo (/sbin/lilo), it messes up my /boot partition. Next time I try to mount it after running lilo, I get an error: "mount: Stale NFS file handle" (I define -t ext2). My /boot partition is ext2, mounted locally, and not nfs. Then I do fsck /dev/sda1, and I get several: Free blocks count wrong for group #0 (7665, counted=5063). Fix<y>? I say yes to all and it works normally afterwards. This happens only after I run lilo. Lilo is installed in MBR.
Here is relevant configuration:
Code:
root@darwin:/home/cabrilo# cat /etc/lilo.conf
append=" vt.default_utf8=0"
boot = /dev/sda
bitmap = /boot/slack.bmp
bmp-colors = 255,0,255,0,255,0
bmp-table = 60,6,1,16
bmp-timer = 65,27,0,255
prompt
timeout = 30
change-rules
reset
vga = normal
image = /boot/vmlinuz
root = /dev/sda3
label = Linux
read-only
This is my partition table:
Code:
root@darwin:/home/cabrilo# fdisk -l
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x8f800200
Device Boot Start End Blocks Id System
/dev/sda1 * 1 13 104422 83 Linux
/dev/sda2 14 144 1052257+ 82 Linux swap
/dev/sda3 145 3432 26410860 83 Linux
/dev/sda4 3433 19457 128720812+ 83 Linux
And this is my fstab:
Code:
root@darwin:/home/cabrilo# cat /etc/fstab
/dev/sda2 swap swap defaults 0 0
/dev/sda3 / ext4 defaults 1 1
/dev/sda1 /boot ext2 defaults 1 2
/dev/sda4 /home ext4 defaults 1 2
#/dev/cdrom /mnt/cdrom auto noauto,owner,ro 0 0
/dev/fd0 /mnt/floppy auto noauto,owner 0 0
devpts /dev/pts devpts gid=5,mode=620 0 0
proc /proc proc defaults 0 0
tmpfs /dev/shm tmpfs defaults 0 0
I have a desire to boot Tripel windows7 arch and Slackware but unsure how to partison my hard drive??
View 5 Replies View RelatedI have used linux on and off for a few years now but still jump between distros.
I have just got my old toshiba laptop working (got lucky and got given another broken laptop for free and managed to merge them into one working laptop )
I am about to install mint 10 RC and fedora and just realised why on earth have I not created a seperate partition for /home?
I have done a quick google and I know it can be done but I thought id ask you guys if you had any tips or advice on sharing files between 2 or more distros?
I have found a how-to for this but if there is a specific tutorial that you would recommend?
Doing some more research into it and I have found that sharing the /home file is 'not adviced' unless using differant user names for each install... so I am now planning on making a /data partition instead.
I'm starting to use a mac, and would like to install different operating systems on it, and, if possible, share some partitions. (like home)
I'm planning to install Debian along with Mac OS X Snow Leopard, and share it's home directory, of, if possible, at least, create a new partition only for my mp3 files.
On my netbook I want to have three linux distros: full desktop ubuntu, a quick loading web oriented netbook OS (maybe UNR or a couple others), and backtrack 4.
To save HD space, I was thinking about having like a 10GB partition for each OS, a 2GB swap partition to be shared, and a /home partition taking up the rest of the drive to be shared between all the OSes. Are there any potential complications here? Should I use a separate user and home folder for each distro or would it be ok to share the same home folder between all of them?
Is it practical to have 2 different Linux distributions which share the same home partition? I know that programs save their configuration in home directory and that can mess up, yet I would like to play with different Linux distros at the same time while always finding my files at home.
View 10 Replies View RelatedI have an ubuntu server with a terabyte hard drive 20 of it have linux install on it and the the rest of it is partitioned to NTFS, i did this using a live Gparted cd, My question is how do I mount and share the NTFS partition with windows. I made an attempt by following a tutorial but i'm pretty sure it did not work because when accessing the network drive in windows 7 it tells me the size of it is 20 gigs,
View 25 Replies View RelatedI just bought a new computer and installed slackware 13 on it. Unfortunately my new desktop doesnt have a wireless adaptor to connect to the wireless in our place, but I have a laptop that can connect to the wireless internet. So I was wondering if theres a way that my laptop can provide internet connection to my dekstop using ethernet?
View 12 Replies View RelatedI have two partitions where I can install (e.g. versions of openSUSE). I have a Swap and a /home partition to be shared by both. Thus e.g., while still running 10.3, I could install and test 11.2. Once I switched over to 11.2, I still can use 10.3 when need arises (not done for monthes now). I have the 10.3 partition mounted, thus I can stilll see what was in /etc/.... on the 10.3 system from the 11.2 system if need arises.
I gave the file systemss on those two partitiions different labels to better keep them apart. It is in the first place up to you to design how you want to partition your disk(s) to facilitate such a feature. Has someone done a thing like this (especially sharing /home partition) with openSUSE and Ubuntu? Is there a How-To anywhere? Until now I have the /home folder of Ubuntu not on a separate partition but under the system/root partition "/" of Ubuntu.
Will this work? I have a new laptop that should be here this afternoon and I would like to share the home partition with a windows install. Here is my plan.
Leave the default install of windows on there but shrink the partition it is on.
Install ubuntu on the new partition along with a home partition
Copy the folders of the home partition and then format the partition into ntfs
Edit the FSTAB and put the folders back into that partition
Boot back into windows and change the "My Documents" folders the those in the home partition
How useful is it to have 2 linux distros (Fedora and Debian) sharing a /tmp partition?
View 3 Replies View RelatedI have 3 computers connected via an ethernet cable to the same ADSL modem. Each has its own internet address and what appears to be a local address (10.1.1.1, 10.1.1.2 etc).
I would like to enable file sharing between the three but I don't want one of them to be a gateway for the others and I don't want any information that the 3 computers share to go out on the net.
So far, the slack book and man pages imply that years of research are ahead of me and none mentions a "gateway free" configuration.
I have spent the last few days setting up SeaMonkey and I've finally got it just the way I like it, and I thought I might share a few tricks I found scattered around the net.
Add-ons: Ad-block (self explanatory)
No-script (self explanatory)
Mouse Gestures (set up similar to Opera's mouse gestures)
Compact Menu - Free up screen real estate with a single menu button.
Lightning v1.0b1 - Calender Extension. (Version 1.0b2 doesn't support SM)
Theme- Using Mostly Crystal
Tricks- Home Button Hack - Add a improvised home button
Speed Dial Hack - Create your own Speed-Dial functionality
I also found it helpful to set the location bar to NOT append www. or .com to text entered into the search bar. (Preferences -> Location Bar -> Untick)
Not sure if this is terribly helpful to anyone but SeaMonkey now behaves (IMHO) a lot nicer and looks great. [PhotoBucket]
I am trying to install a box here where my /storage partition is about 2.5T.I had setup the partitioning with suse, while testing, and all worked well.Now when trying to install CentOs 5.5 it gives me an error, that my boot partition is on a gpt partition and this machine cannot boot that.Also I don't see the option to create XFS partitions from the installer.Can 5.5 support GPT @ install time?
View 1 Replies View Relatedis there a way of sharing an ext3/ext4 formatted partition on an external USB drive between different users (uids) on different Linux machines without creating a group for this purpose, setting the group ownership of the partition to this group and adding each respective user to the group on every machine?This would mean that I need to have root privileges on every machine... which I may not have in some cases.I'm using the partition to store the code I'm developing on Linux and I would like the option to be safe... if possible.I could use a vfat partition but then I have no control of the rw rights + I cannot develop directly in the dir: I would always have to tar.gz the directory, extract, work, tar.gz, copy to the external drive.
View 2 Replies View Relatedhalf the fun of running Slackware is how easy it is to make Slackware packages from source! I know there are many, many unofficial Slackware repos
[Code]....
I'm slack 13.1, I am trying to install it, but always gives an error. I type cfdisk and appears this error:
Fatal error: bad primary partition 2: Partition ends in the final partial cylinde Press any key to exit cfdisk
I have a Win7 laptop with the latest version of VirtualBox installed. It's a dual core proc with ram to spare. So, I installed Slack64-13.1 and it rocks! I'm really impressed that Slack is running at what appears to be native speed, but in virtual machine. Hardware response is normal, WIFI and LAN are both working great for my normal tasks.So, I downloaded a few much needed patches, and new ISO image for one of my old desktop PCs. Now, my problem is I can't connect my USB cdwriter to my virtual slackware or share folders in the Win7 install with the virtual slackware. I read a few of tutorials on the Oracle VBox website, and several of the ones here on LQ, and none of them seem to solve my problems.
View 3 Replies View RelatedI'm trying to samba share my NTSF partition in slackware 13. I chose for root to have read/write access only.
How can I change this to allow samba share for my regular non-root account?
How do i re size my Slackware partition without deleting it and starting over, I'm new to Slackware and the work i have done i don't feel like doing again.I have set my swap and my actual HDD partition for Slackware to +8048M, I am correct in saying that fdisk can only delete and start fresh, I was a Ubuntu/Fedora user if i could get something like Gparted up that would be great but i don't mind some reading and learning some more terminal based stuff.Planning on working out the kinks and dealing with the learning curve, Love to learn.
View 12 Replies View RelatedRecently I reinstall Grub, but I have chosen on ntfs (windows 7 partition E: drive). After this I chosen /dev/sda which is correct boot partition.
Now Fedora 10 and Win 7 booth are working properly.
How can I get back my E: drive safely?
In Fedora 10 E: is not available, where as in Win7 it is available but asking for Format.
how to get back my E: partition which was chosen wrongly as boot partition.
using onboard windows disk management i have made 75gb unallocated to add to the aforementioned ntfs data partition. but, after resizing extended partition, will i need to fix grub even though i will be adding the unallocated space to a storage partition and not the ubuntu boot partition?
View 4 Replies View RelatedI can access the folders that I have created in XP. What I would like to know is whether or not it is possible to share or link folders between the two OS. For example, I try to keep my files organized as best I can and had been keeping pictures in my XP "My Pictures" folder, but have to do a bit of directory digging to get to that same folder from Ubuntu.
View 5 Replies View RelatedSetting up an old machine for some family members that are not so tech savvy. It will dual boot Windows XP and Ubuntu 10.04. The partitioning is as follows:
sda1 12 Gb ntfs WinXP
sda2 ----- ---- Extended
sda3 10 Gb ext4 Ubuntu
[code]....
Im using WPA with a TKIP pre-shared key...Can a client pc im sharing my key with access my files if im not file sharing? Router config?
View 2 Replies View RelatedSo I got slackware 13 from the website and created 4 partitions (primary) and left some (100GB) space as I planned to install windows 7 in that. After installing slack, when I booted from windows DVD (rtm) in partition section it said I already have 4 primary partition so windows cannot used the rest of space despite the fact that it was free (windows even grayed all options like new partition and format etc. for that space). So I thought I'd create 2-3 primary partition for linux (slackware) so that windows can use the free space and make it a primary partition.
So, Next I formatted with slack (3 partition, 2 Primary, 1 extended, total space for slack 50GB) and after its installation I worked my way with windows, but it just created one partition of 100Gb, won't let me create any saying all primary partitions are created. Anyway, I created that partition and installed windows 7. But it messed up my lilo (slack won't show in boot menu) neither can I create any new partition.
After all I reformatted again created 2 partitions for windows (that actually became 3 as windows 7 create 100Mb separate partition for system). Installed windows correctly. Then I booted with slack , which allowed only creating 1 partition as 3 were already there. So I created 1 extended partition, in which I created 4 partition 1 to mount for /boot (100M), 1 for /swap (3G), 1 for home (10G), 1 for / (35G) everything worked fine till I reached last point to install lilo. At that point it said cannot install Lilo (I tried all options simple, expert, install to MBR etc.) but it just won't install. Anyway, after that it said you can install it manually so I clicked OK. Then it said setup complete, remove disk and press alt+ctrl+del to reboot, which I did. But there is just windows 7, no slack ?
