Slackware :: Oracle VM Console Button Not Working (VNC)?
May 30, 2011
I need to be able to install new virtual machines with Oracle VM. There's console button in the web interface which opens VNC connection to specified Virtual guest but it haven't been able to get it to work yet. [URL] I converted the rpm to tgz package and installed it. It installs the packages to /opt. I also tried info in the following link: [URL] Firefox's about:config lists the ovm-console plugin active and when I press the console button in the web page it opens up a new window. The window doesn't prompt for missing plugin but it won't open the VNC display either. As an alternative I installed tigervnc from Aliens repo but it has problems with the mouse cursor. My laptop mouse cursor goes at different pace than the vnc client cursor so it makes its use very hard.
Edit, forgot to mention that I checked and tightvnc-java package is installed on the Oracle VM manager and the console button works on Windows and on Fedora when I tried it. So the issue seems to be limited to my Slackware64 setup.
View 5 Replies
ADVERTISEMENT
Dec 6, 2010
I am having a java program which will read characters from console. i have started my program from bash shell and now the program starts and waiting for the inputs. Say I have typed text , "hello". If i try to move the cursor position back wards using the left arrow button it was not working. Instead some junk characters are printed on the console like ^[[C .
hello^[[C^[[C^[[C^[[C^[[C
Below is my program.
public static void main(String as[]) {
BufferedWriter outputWriter =
new BufferedWriter(new PrintWriter(System.out));
[code]....
Note: In windows its working fine.
View 6 Replies
View Related
Aug 13, 2010
I am trying to get my standard PS/2 Wheel mouse working on the Console command line, and seem to be having major problems getting it to work.
For the record, I am NOT talking about X, Xterm's or any Graphical Interface, my mouse wheel works fine in these environments.
I am purely concerned with getting the mouse wheel to work on the Console.
After many hours of reading forum posts about getting the wheel to work on the Console, this is what I have tried to date:
1. I have downloaded and installed every version of gpm I could find in the hope that one would utilise the wheel. (No Success).
2. I compiled and installed the latest version of gpm stable (1.20.6) to see if the wheel would work with it. (No Success).
3. I have tried setting up gpm-1.20.6 as a repeater to X, using every string I could find (msc, ms3, pnp .. etc), as well as every /dev entry in xorg.conf /dev/mouse, /dev/input/mice/, dev/gpmdata/, /dev/psaux ... etc). (No Success).
4. Created directories and configured a gpm.conf to both /etc/ and /etc/conf.d/ in the hope that gpm was looking for them there (read that in one forum or another). (No Success).
5. I then tried to find mouse wheel patches for gpm, and then downloaded the relevant version source gpm.***.tar.gz to go with these patches. Nearly every single one of the patches failed to apply (using patch -p1 >), except for one version I tried that did apply ... but then failed to make (stating that the source had a different signedness or some such thing) ??? (No Success).
6. I looked into IMwheel, but that seemed to be a purely X program that was a lazy way of writing ZAxisMapping in xorg.conf. (No Success).
So now I am stumped ... Does anyone know if if is possible to get:
a). A Wheel Mouse Patch for a recent version of gpm (1.20.6) that will actually apply, and then make?
b). A prepackaged recent version of gpm-1.20.6.tgz that has been patched to enable the wheel that I can use?
c). Any other information that may enable the mouse wheel to start working on the console.
View 6 Replies
View Related
Apr 7, 2010
i have been using mysql for quite a some time now..It works great and i can use it comfortably for my study purpose..But now i have to learn oracle 10g for some of my courses.how can i install oracle 10g on my slackware.
View 3 Replies
View Related
Jul 24, 2011
Im trying to install a multiboot with multi distros, in this case Slackware and Linux Oracle. I have Slackware running for a while now and try to install it in other partition. Suppose I have Slackware in /dev/hdb and planning to install Oracle Linux in /dev/sda. My plan is:
1.Format /dev/sda
2.Install Oracle Linux in /dev/sda using boot disk
3.Modify lilo.conf
4.Run dual boot
But the problem is during the Oracle Linux boot installation: 1.It doesnt recognize the partition and file format that Slackware did in /dev/sda 2.The installation disk then force me to create another partition for memory swap and root directory 3.At first attempt I created a partition in /dev/sda with RAID format which didnt get recognized by Slackware so that I had it wiped out at the next attempt of installation.4.Just before the process of partitioning /dev/sda, Oracle Linux installer from the boot disk cannot detect my dvd drive although the PC was booted from its very drive (Why?) so It was asking me if I need to point out the location of another copy of the image file, which is located in /dev/sda1. The installer read it from /dev/sda1, I think not from DVD drive. This always happens in all attempts.5.At the end, it cannot finish the process of the installation and I have to abort it, without knowing the reason for it. This happens in all attempts also.
[Code]...
View 4 Replies
View Related
Feb 18, 2010
I followed the sticky about setting up wireless and I have come to an issue where the WLAN switch which is on this computer can be pressed, the light comes on, but no WLAN. When I looked in dmesg, this is what I get:
ipw2100: Detected Intel PRO/Wireless 2100 Network Connection
firmware: requesting ipw2100-1.3.fw
eth0: Radio is disabled by RF switch.
When running iwconfig wlan0 heres what I get:
home/j-dub # iwconfig eth0
wlan0 unassociated ESSID off/any Nickname:"ipw2100"
Mode:Managed Channel=0 Access Point: Not-Associated
[code]....
Notice it says that the 'Radio is disabled by switch' in dmesg. I can press that switch until the end of the world comes and it does absolutely nothing but make the WLAN light put on a light show. And it shows the wlan to be unassociated with any clients. So, what are my options to get this Wireless up and working?
Computer/OS info:
Fujitsu-Siemens Amilo M7400
1.4GHz Intel Centrino R
40GB HD
Suse 11.1 KDE
View 9 Replies
View Related
Nov 27, 2010
I'm a new user for oracle,tried to install oracle 10g on redhat linux 5 but gettinh the same error message.response/ runInstaller[oracle2@localhost database_10201]$ sh runInstaller _runInstaller: line 54:/tmp/database_10201/install/.oui: Permission denied_Doany one plz help me how to give full set of permisions to an user in linux to access a folder??
View 2 Replies
View Related
Jul 24, 2011
I've AMD64 system with Ubuntu 11.04 installed. It's been rough ride for me to install oracle-xe-universal. I've already spent more than 2 days on this. Still unsuccessful.
1) First I downloaded the packages libaio_0.3.104-1_i386.deb and oracle-xe-universal_10.2.0.1-1.1_i386.deb
2) Then I ran
sudo apt-get install bc (ran fine)
sudo dpkg -i --force-architecture libaio_0.3.104-1_i386.deb (ran fine)
sudo dpkg -i --force-architecture oracle-xe-universal_10.2.0.1-1.1_i386.deb
(gave me dependency error for libc6 (>= 2.3.2), I modified the control file to remove dependency and rebuilt the package) (now worked fine) Oracle xe is now installed. Then I tried to start the DB it started but it's HTTP client never started. So I decided to uninstall the oracle-xe=universal. None of the sudo apt-get remove oracle-xe-universal command's didn't worked for me. So i went for manual uninstallation directions as per oracle link.
I ran the following command-
--Manually uninstalling Oracle 10g--
sudo rm -rf /usr/lib/oracle /etc/oratab /etc/init.d/oracle-xe /etc/sysconfig/oracle-xe /usr/share/doc/oracle_xe /usr/share/doc/oracle_xe_client
Then I again ran the following command to install oracle-xe
sudo dpkg -i --force-architecture oracle-xe-universal_10.2.0.1-1.0_i386.deb
See below what I got as the output-
rocky@ubuntu:~/git/mygit/edas2/libaio$ sudo dpkg -i --force-architecture oracle-xe-universal_10.2.0.1-1.1_i386.deb
dpkg: warning: overriding problem because --force enabled:
package architecture (i386) does not match system (amd64)
[code]....
Even in applications menu I don't see the if oracle has been installed. So i conclude first time installation was ok but somehow http client didn't worked. After manual uninstallation, second installation didn't even loaded/installed the oracle-xe in init.d directory.
View 1 Replies
View Related
Mar 11, 2011
I have messed with things I shouldn't have so I am going to reinstall F14..Could someone please explain how to install the JDK from oracle and get the plugin working for firefox please?
View 14 Replies
View Related
Feb 10, 2010
When I logon at the text console I see the following:
Code:
gbnet login: root
Password:
[code]....
View 5 Replies
View Related
Jun 27, 2011
i wanna know what is my console, the terminal, pseudo terminal, thses things seem one thing to me ,, plz can anyone differentiate them. and how many consoles and terminals i have in slackware.
View 12 Replies
View Related
May 21, 2011
Is it possible to turn off the computer (Slackware 13.37 Box) simply using the power button on the keyboard
View 7 Replies
View Related
May 19, 2010
Mousepad in xfce seems to have a problem when compiled with the latest libraries. In Slackware Current (13.1 RC1?) the "Find" button stays disabled the SECOND time you try to do a "find". Because of this, you can only do one "find" without closing Mousepad and opening it again.I found a bug report for this problem in a forumr a different distribution:[URL]I have applied this patch to the current xfce source code on my local machine and it seemed to solve the problem.It would be nice if this patch could make its way into the 13.1 release.
View 4 Replies
View Related
Apr 24, 2011
I've always been under the impression that when using the console only a notebook's display is used. Apparently this is not the case as I just booted off of a SystemRescueCD and the display on the notebook was mirrored on my external HDMI connected monitor. I have a feeling this is set somewhere in the kernel, but where?
View 4 Replies
View Related
Jun 23, 2010
I'm running slack64 13.0. At initial boot i see the two penguins and text from th kernel scrolls past until my root partition is mounted where upon all messages stop until the console prompt or KDM pops up. Everything seems to be operating as normal but i've no idea whats happening during the rc scripts (FS checking, etc). When shutting down though the rc.6/rc.0 script messages appear in the console though.
To my knowledge i've not changed anything that would effect this (just modified inittab for runlevel 4 & tty4,5,6 in runlevel 4).
There's nothing in dmesg but most messages don't get logged there as i understand.
View 12 Replies
View Related
Jan 8, 2010
I've got 5 users who share a bunch of virtual Windows XP guests via VRDP (VirtualBox RDP access), and I'm having some problems with managing their NumLock state. They all use rdesktop to access the Windows XP machines. This works very well, as long as all of them have NumLock enabled. If one of them disables it by mistake, and then logs into one of the Windows XP machines, NumLock is disabled and some of the programs they use start to act really weird. This is causing us some grief.
So I'd like to be able to enable NumLock on all the computers (they are all running Slackware 12.2) before X, while X runs and while KDE is running. And when NumLock is enabled for the entire system, thenI'd like to remove the ability to disable NumLock altogether. NumLock should always be enabled for these users, no matter what. It would be really nice if Linux/X/KDE/whatever just honored the BIOS setting, but I haven't been able to figure out how to do that. Oh, and I'd really like if the NumLock LED was ON, so everybody are made aware of the fact that they have NumLock turned on.
ps. I've tried remapping the keys on the numeric pad with xmodmap, but that doesn't solve the problem. The actual NumLock state must be set to avoid problems with the troubled Windows programs.
View 4 Replies
View Related
Jan 26, 2010
I have just installed slackware. I have done
Code:
Xorg -configure
And chosen kde for init program while installing slackware. But when I type
Code:
Xorg -config -retro
or
Code:
startx
I get black screen with blinking button on monitor and keyboard. Obviously KDE doesn't start.
View 14 Replies
View Related
Jul 25, 2011
I'm running Slackware 13.37 with XFCE. I'm trying to increase the menu button size. I remember having succeeded in doing this with XFCE 4.2, but I unfortunately forgot to write down how I did that.
View 3 Replies
View Related
Apr 6, 2011
I'm running Slackware64-current. The newsreader pan crashes in the moment when I click the send-button. The message is sent anyway.
View 2 Replies
View Related
Jun 17, 2010
I upgraded to 13.1 and found the restart, shutdown buttons do not work. I have to resort to the terminal commands init 6, or poweroff. I then tried to install flash plugin. I modified the slackbuild script as per normal. Then issued the following command which seemed to succeed. But when I try to play utube movie it says flash is not installed. Do I need to rebuild the system?
Code:
root@redeemer:/tmp# installpkg flash-player-plugin-10.0_r45-x86_64-1_SBo.tgz
Verifying package flash-player-plugin-10.0_r45-x86_64-1_SBo.tgz.
Installing package flash-player-plugin-10.0_r45-x86_64-1_SBo.tgz:
Package Description:
# flash-player-plugin (flash plugin for web browsers)
# Provides Adobe Flash plugin for browsers that recognize
# /usr/lib(64)/mozilla/plugins as a valid plugin directory
# Plugin is subject to Adobe terms of use:
# [URL]
# Plugin is subject to Adobe Flash EULA:
# [URL]
# Package flash-player-plugin-10.0_r45-x86_64-1_SBo.tgz installed.
View 14 Replies
View Related
Feb 16, 2011
I use various hard disks in my computer. When I install a 13.1 disk, the six text consoles <Ctrl-F1> through <Ctrl-F6> are shifted to the left such that the first 2 characters in the line are off my flat panel screen. I use several different disks on this machine and all other disks are properly aligned. change the vga line in /etc/lilo.conf to vga = normal rather than vga = 773. This didn't fix the problem and resulted in another problem. If I adjust my flat panel horizontal adjustment, when I start XWindows, those screens are too far to the right. Is there a way to adjust the horizontal offset only for the consoles?
View 1 Replies
View Related
Aug 16, 2010
I just installed Slackware 13.1 on my Acer a0531h. My first problem is the size of letters on pure console. It's too small. I tried tweaking lilo but even using 'normal' doesn't change the size of letters. I haven't changed the default font (I think it's called default8x16). The text looks pretty sharp though, so I'm wondering whether this is its native resolution. The text during installation was huge, and quite blurry. I just want to have a text size I can easily read and if possible be sharp. I know I can start X and have whatever font family and size I want, but somehow I feel better using pure console. Just in case it matters, I want to say that eventually I want to have UTF8 support on the command line (so that I can read and write Greek).
View 6 Replies
View Related
Nov 14, 2010
I'd like to be able to manually mount a USB stick in console (before X is started) and I can't seem to find a good way to do that. I'm not too smart about HAL and UDEV and I don't want to undo the auto mount feature when X is running but still be able to manually mount and unmount as necessary; like for installing patches and packages after an install or version upgrade. It seems like there should be an entry in /etc/fstab and a directory in /mnt or /media but danged if I can find something that points the way.
View 12 Replies
View Related
Nov 19, 2010
I have sometimes wished to place a reminder, to be displayed after I login. And what I did was to write it in /etc/motd or in /etc/issue. But something in the system erases or writes a new motd/issue.What would be the easiest way to have a reminder printed on the console just after login?
View 10 Replies
View Related
Apr 3, 2010
I want to be able to access my email account from the console. I'm reading all day about fetchmail, postfix, sendmail etc. but all the stuff I found is related to building whole mail system. All I want to do is to read my emails and write some. Which is the painless way to do this? I successfully configured Evolution for this purpose but I want to do that from the console.
View 10 Replies
View Related
Dec 12, 2010
I really like KDE 4.4.3, which comes with Slackware 13.1. It is very responsive even on my Pentium III IBM laptop, and that, even with Nepomuk, Akonadi, and Strigi running! However, I'm building Linux from Scratch 6.7 on that laptop right now and I decided that I wanted a much lighter-weight X environment for building LFS because I really only need Firefox and Konsole. The other stuff that's running in KDE that make it nice to use day to day simply uses resources that aren't needed when I'm mostly just compiling software.
So I started looking for light WMs. I played a lot with TWM, which I like. But I wanted to be able to Alt-Tab between Firefox and Console. I think I can do that if I customize the .twmrc, but I haven't got that far with it yet. So I built and installed Openbox from Slackbuilds.org, along with the Tint2 panel/taskbar. It works perfectly for what how I want to use it!
View 14 Replies
View Related
Jul 31, 2010
I use Slackware64 13.1, sometimes when I click in the right mouse button, the thunar window closes.
View 14 Replies
View Related
Jan 28, 2010
i got a razer diamondback 3G and button 1,2,3+weel up/down works.. but the button 4 (previous) not.
instead the button 5 (next) do previous, and button 4 don't work.
i tried modify xorg.conf but do nothing..
View 3 Replies
View Related
Feb 26, 2011
I an running Ubuntu 10.04 and for some very strange reason, everything works just fine except for the delete button. Usually I wouldn't be concerned about this, but lately, I've taken to programming in vi so the delete button is pretty useful.
View 3 Replies
View Related
Mar 14, 2011
i have ubuntu 10.04 on my laptop and whenever i press WINDOWS+TAB the applications sit on a glass like platform (kinda like the itunes album library). I've now installed ubuntu on my desktop pc but that feature isn't working ... what's it's name? How do i get it to work?
View 2 Replies
View Related
