Slackware :: Error Loading LibXft.so.2
Sep 21, 2010
I'm trying to run a counter-strike 1.6 server (hlds) on a slackware 13.0 machine, but I continue getting these errors:
./hlds_run: line 321: 8644 Segmentation fault $HL_CMD
I read loads of articles, but there's no known solution. I found an article for debian, where the problem was from missing lib packages:
# apt-get install libdb4.6-dev
# apt-get install libc6
# apt-get install libc6-dev
# apt-get install libc6-i686
# apt-get install libgcc1-dbg
# apt-get install gcc-4.1-base
So, just today when I restarted the machine I noticed this error:
img641.imageshack.us/img641/5606/slacklinux.jpg
I think it's possible, that because of it, i'm getting the segfault problems. Is there a way to fix that?
View 5 Replies
ADVERTISEMENT
Jan 7, 2010
I installed ripperX using a slackware package I found online. When I try to run the program however I get the following error:
Code: RipperX: error while loading shared libraries: libid3-3.8.so.3: cannot open shared object file: No such file or directory I downloaded what I thought was this library and installed - now if I look in /usr/local/lib, I have the following:
[code]....
How can I get this library installed?
View 3 Replies
View Related
Jun 27, 2010
I'm running Slack 13.1 64 bit. I'd like to try running multi for 32 bit support so I can run a 32 bit version of firefox using the 32 bit flash plugin. Here's what I did: - followed Alien Bob's Wiki and download and installed all the *txz files. - installed a bunch of required libraries following the instructions on the Wiki - installed the 32 bit 10.1 version of the flash player plugin in $HOME/.mozilla/plugins/ - started the 32 bit 3.6.3 version of firefox; it seems to work fine. - go to about plugins and verify that Shockwave Flash (libflashplayer.so) is version 10.1 r53 and it is enabled. - run "ldd libflashplayer.so" and verified that all libraries are found. - run "ldd /usr/lib/firefox-3.6.3/firefox-bin" and verified all libraries are found. - go to [URL]... and click on "test your adobe flash player installation" I will get this error: Adobe Flash Player error: could not load cURL library - I verified (repeatedly) that I do have what I think is the correct package. How can I fix (or start debugging) this error?
View 7 Replies
View Related
Dec 5, 2010
I just did a fresh install of Slackware 13.0 on a Toshiba laptop, and the ONLY thing I did on it after creating a user and switching to init 4 was to run upgrades. After doing so several applications failed to launch, so I rebooted the machine. I get the following error followed by a login prompt:
Code:
/bin/sh: error while loading shared libraries: libtermcap.so.2: cannot open shaed object file: no such file or directory And nobody can log in, including root. I've got another laptop running 13.0 with all the latest upgrades and it runs fine.
View 3 Replies
View Related
Aug 7, 2010
I downloaded wxGTK-2.8.11.tar.gz , compiled and installed ok. here's the problem, there's library lib libwx_gtk2_richtext-2.8.so.0 exist in my directory /usr/local/lib but no lib libwx_gtk2u_richtext-2.8.so.0, look this:
View 9 Replies
View Related
Feb 19, 2009
In installing Intel Fortran Compiler for Linux in my HP Laptop running on FC6,the rpm for debuger shows a dependency error for libXft.so.1. On searching in my system, foundlibXft.so and libXft.so.2. I downloaded and installed the rpm package "xorg-x11-libs- .8.2-37.FC4.49.2.1.i386.rpm"(rpm for FC6 was not found) with 'rpm -i' option. On rebooting Fedora, nothig displayed in monitor except few initiliation messages. I booted the system with FC6 installation DVD and tried to uninstall by mounting as 'chroot /mnt/sysimage' with 'rpm -e' command, but en error message comes as "error, the package 'xorg-x11-libs- .8.2-37.FC4.49.2.1.i386.rpm'is no installed". On booting from the system, i found the same problem.
View 5 Replies
View Related
Jan 26, 2011
After finally getting my wireless/graphics drivers working yesterday (thanks to this forum ) I startx to realize that not a single KDE/Qt application will launch, along with Firefox, or Chrome/Chromium. (I did a full install from the DVD, not deselecting anything, and when I upgraded to -current, I also did the same.)
Ark said:
Quote:
ark: error while loading shared libraries: liblzma.so.0: cannot open shared object file: No such file or directory
but I managed to fix that one by commenting out 'aaa_elflibs' in /etc/slackpkg/blacklist (on a recommendation from #slackware), and running slackpkg upgrade-all again, but that's the only one (afaik) that was fixed. Ark still doesn't work, but it doesn't show that error anymore. When I run it, a box pops up that says "Unable to find Ark's KPart component, please check your installation."
Kate still says:
Quote:
kate: error while loading shared libraries: libkemoticons.so.4: cannot open shared object file: No such file or directory
Now, konsole, firefox, and Chromium's errors are a little different.
Konsole:
Quote:
konsole: symbol lookup error: /usr/lib/libphonon.so.4: undefined symbol: _ZN9QMetaType15registerTypedefEPKci
Firefox and Chrome basically say the same thing
Quote:
/usr/lib/firefox-3.6.13/firefox-bin: symbol lookup error: /usr/lib/mozilla/plugins/skypebuttons.so: undefined symbol: _ZN9QListData11detach_growEPii
again, I am completely baffled here, as I had kate, konsole and ark running before I upgraded to -current.
View 5 Replies
View Related
Feb 26, 2011
I've upgraded Slackware-13.1 I had installed to Slackware-Current using a local tree I had download with mirror-slackware-current.sh script, but when I rebooted I could not get the graphics to load. I think it's because I've also modified /etc/groups and add an username after audio: and video: group, but I forgot that and had to remove slackware from the machine.
View 4 Replies
View Related
May 23, 2010
When I try and boot my Debian computer I get the messages: Grub Loading stage1.5. Grub loading, please wait... Error 15 Is there any way of recovering from this - or is it simply a fresh install? I was attempting an upgrade from Lenny to Squeeze and despite a few hurdles it looked like it was all happening. Got the new kernel loading, and the new grub. It looked as though grub2 was working so I ran the grub-remove-legacy-support command (something like that) and now my computer won't boot grub or Linux.
I'm assuming the MBR on my harddrive is lost, however I don't know what state the partition is in. I'm guessing that maybe this has been lost as well. I tried a few tools from the Ultimate Boot CD but nothing here was able to re-install my grub or boot from any partition or even mount my file-system. I'm fearing the worst but would like it confirmed before I blow it all away with a new install.
View 8 Replies
View Related
Mar 12, 2010
I tried to install Fedora 12 on my machine using the Fedora-12-i386-DVD and get the following error: /sbin/load_policy:error while loading shared libraries: lib/libsepol.so.1: cannot read the file data:input/output error exec of anaconda failed install exited abnormally [1/1]
View 2 Replies
View Related
Feb 21, 2010
I been running both OS's for a few months now with no major problems besides wireless internet issues. Today, however, as I go to boot my laptop up, the Dell logo loads with the F2 and F12 boot and setup options which both work. Directly after that though I get the message "GRUB loading. Symbol '?' not found. Aborted. Press any key to Exit." then it repeats when I push a key, and then it tells me to press F1 to retry, F2 to go to setup, or F5 to run diagnostics. It passes all the tests in diagnostics. I've tried booting off of the ubuntu cd I used to load it initially with no luck. So I'm stuck at either that error message or in setup but I can't go any further, and it does not change anything when I tried to boot from the cd.
View 8 Replies
View Related
Dec 23, 2010
I recently setup a new server that serves files over samba and is a subversion repository for a number of projects. I did a simple apt-get update/upgrade for which the system requested a reboot. After I rebooted, I got to the login prompt, at which point I ran into a problem. After I enter my correct credentials, it spits out the following error:
sh: error while loading shared libraries libc.so.6: cannot open shared object file: Error 24
and returns me to the login prompt. Samba and Subversion are both still working, I simply can't login to the server either physically or via SSH.
What steps should I be taking to correct this issue? My thoughts are that I may need to use a Live CD to load the system and perhaps do another update, but before I go through that process I just wanted to check in and see if there might be some other solution.
I have tried googling the issue, and while I have seen other posts regarding shared library issues, there was never anything about not being able to login and I never did find anything specific to the error message I received.
View 5 Replies
View Related
Jan 5, 2010
I receive these messages after I enter my user_id and password in Ubuntu 9.04;
"An error occured while loading or saving configuration information for update notifier. Some of your configuration settings may not work properly." then clicking on details box this can be seen;- {Failed to connect configuration server; some possible causes are that you need to enable TCP/IP networking for ORBIT, or you have stale NFS locks due to a system crash. See http://projects.gnome.org/gconf/ for information. (Details - 1: Could not send message to gconf daemon: Message did not receive a reply (timeout by message bus))}
then there's another error message;
"An error occured while loading or saving configuration information for evolution-alarm-notify. Some of your configuration settings may not work properly." then clicking on details box this can be seen;- {Failed to connect configuration server; some possible causes are that you need to enable TCP/IP networking for ORBIT, or you have stale NFS locks due to a system crash. See http://projects.gnome.org/gconf/ for information. (Details - 1: Could not send message to gconf daemon: Message did not receive a reply (timeout by message bus))}
after clicking Ok. the desktop is just blank.
View 2 Replies
View Related
Feb 6, 2010
Just trying to install Skype on Fedora 12 .. but got an error: skype: error while loading shared libraries: libasound.so.2: cannot open shared object file: No such file or directory So, anyone got it working there ?
View 9 Replies
View Related
Jun 10, 2011
For some reason, it seems that 13.37 isn't loading the modules I need for cpu frequency scaling. I've edited /etc/rc.d/rc.modules so that CPUFREQ is set to on. On 13.1, this would mean the powernow-k8 module would be loaded for my AMD cpu, and the subsequent "ondemand" governor would be loaded. However, for some reason this isn't being done during the boot process. I've tried it using both the generic kernel and the huge kernel (I'd been using huge for a long time before without realizing it.) Has anything changed in 13.37 with regards to CPU frequency scaling?
View 5 Replies
View Related
Aug 25, 2010
I use a RaLink RT3090 Wireless PCIe card. When I installed Slackware, the required driver was not in the Linux kernel, but a Linux driver did exist, so I downloaded, compiled, and installed it.Initially, when typing lspci -v, I got:Kernel driver in use: rt2860Kernel modules: rt2860sta, rt2800pcifor my card. The driver I compiled was named rt3090sta, and if I typed modprobe rt3090sta, it would not load. Eventually, I discovered that to get it to work, I had to type the following commands.
rmmod rt2860sta
rmmod rt2800pci
modprobe rt3090sta
modporbe rt2800pci
And yes, if I do not enter rmmod rt2800pci, and then modprobe rt2800pci at the end, it will not work. I would like to know how to get rt3090sta toload by default instead of rt2860sta. After I've done this, lspci -v gives me: Kernel driver in use: rt2860rnel modules: rt3090sta, rt2860sta, rt2800pci
View 4 Replies
View Related
Apr 12, 2011
I'm dualbooting Slackware and Arch Linux. I'm using Slackwares GRUB installed from /extra Loading Slackware from GRUB works fine, but loading Arch Linux doesn't. Here's the messages when trying to load Arch from GRUB:
[Code]....
View 8 Replies
View Related
Jun 1, 2011
I am running slackware 13.37. I installed the newest NVIDIA drivers 270.41.19 and now impossible to load Xorg.
I get:
fatal server error:
How I installed the new nvidia drivers:
- removepkg xf86-video-nouveau
- installed xf86-video-nouveau-blacklist-noarch-1.txz for blacklist the nv drivers
- run script nvidia
- run nvidia-xconfig
- reboot
The startx and black screen with errors messages mentioned above.
I run glxinfo | grep render and i get " Error: Unable to open display". Logical since no Xorg
I run dmesg | grep nvidia and I get all the required fields:
- NVIDIA taint kernels
- power state
- enabling device
- PCI INT A
- Setting latency
I have to manually copy the errors messages since my PC is not working.
When I run "find /usr/lib -name *.270.* " I do get the module Same thing when I run "find /lib -name nvidia.ko". I see the nvidia.ko module.
View 11 Replies
View Related
Dec 27, 2010
All of a sudden my laptop decided to not bootup. It stops while loading syslogd. I started up in single user mode and added a few echo statements in rc.syslog so it looks like:
Code:
This means that execution of the script doesn't seem to get past the "/usr/sbin/syslogd" line. Well at least thats the case in the first 2-3 minutes. Afterwards my screen gets flooded with the next echo I placed "caught in the loooooop!".
Again, stating the obvious, the script reads on and gets caught in the while loop. obviously there is no /dev/log and something must have messed up the execution of syslogd. what could that be it?
Recently I was fiddling around with jackd and trying to setup a jack-rack on my laptop. To do that I had to recompile alsa-driver from scratch in order to include the virtual soundcard driver. I also had to rebuild the mainline kernel to add low-latency (I did not switch to kernel-rt). Overall, I've been running with a custom kernel more than 2 months now and never had a problem with syslogd startup. The new low latency custom kernel is just like the previous one but with only difference the low latency setting. With the low latency kernel I've been using the pc for approx a week and have done 5+ reboots. So the problem appeared now out of nowhere...
If I disable rc.syslog and I start the pc, and then start it up, syslogd with execute nicely and quickly as if there was no problem, ever...
View 7 Replies
View Related
Feb 4, 2010
I have installed both Windows Xp and Fedora 12. Last time when i was working on Fedora it didn't shut down properly. Now following error occurs and finally the system sleeps.
ata1.00 : exception Emask 0x0 Sact 0x0 SErr 0x0 action 0x0
ata1.00 : BMDMA stat 0x25
ata1.00 : cmd c8/00:00:50:5a:34/00:00:00:00:00/e4 tag 0 dma 131072 1n
res 51/40:7f:d1:5a:34//00:00:00:00:00/e4 Emask 0x9 (media error)
ata1.00 : status : { DRDY ERR }
ata1.00 : err : { UNC }
end_request: I/O error, dev sda, sector 70539985 JBD : Failed to read block at offset 5884 EXT4-fs(sda): error loading journal mount: wrong fs type, bad option, bad superblock on /dev/sda8, codepage or helper program, or other error In some case useful info is found in syslog-ty dmesg | tail or so
View 1 Replies
View Related
Oct 24, 2010
I have a long running 9.10 installation. All of a sudden, on boot, I get this error: "loading initial ramdisk error: file not found" If I hit 'E' at the menu entry, I can scroll all the way to the end of the boot command, and it appears that the last 'c' on 'generic' is missing from the kernel name. If I add the c and hit ctrl-x it boots fine. The grub.cfg appears to be correct, it has the full generic spelled out.
View 9 Replies
View Related
Jul 8, 2011
I am new to Linux. I have installed RHEL 5.4 on my PC with preloaded Windows XP.
Windows was set as the first boot kernel. So if i do not choose which OS to be loaded it will load Windows by Default.
Today I got an error saying GRub Loading Stage2 read error.
View 9 Replies
View Related
Feb 19, 2010
I need to flash my BIOS to get rid of an error: "Intel uCode loading error". On [URL] I have found a tutorial, that looks to be fine. I can even see in the comments, that somebody have done this with success from Ubuntu 9.04, the very same system, that I use. Nevertheless I cannot make this bootCD with my Ubuntu 9.04, as it doesn't know the loop option to mount the image.
In the tutorial it says: "Requirements for this step is that you have support for the vfat and loop file systems in the kernel. Or you can have those features compiled as modules. In the latter case you can load the modules before the next step, like this:
modprobe vfat
modprobe loop"
loop doesn't seem to be present in my system, and the command modprobe loop returns an error that the module is not available. I tried to follow the tutorial anyway, but with no success. How can I get the module lopp? I also want to use it to make iso images bootsble from the harddisk.
View 2 Replies
View Related
Jan 19, 2011
after install slackware with gnome using gnome slack build it is work fine Except some thing :-
the volume it is not work and get this error ((The volume control did not find any elements and/or devices to control. This means either that you don't have the right GStreamer plugins installed, or that you don't have a sound card configured. You can remove the volume control from the panel by right-clicking the speaker icon on the panel and selecting "Remove From Panel" from the menu.
No volume control GStreamer plugins and/or devices found.)) and the System Monitor give me this error when i want check the state of memory and processor ((There was an error executing 'gnome-system-monitor': Failed to execute child process "gnome-system-monitor" (No such file or directory)) and the memory flash not work and give me this error ((Error org.freedesktop.DBus.Error.AccessDenied.))
View 6 Replies
View Related
Oct 9, 2009
While loading application programs throgh shell prompt, error message as shown below is coming on the screen
[root@athi disk-1]# ooffice G.O.P.296-07.pdf
Xlib: extension "ATIFGLRXDRI" missing on display ":0.0".
[root@athi disk-1]#
View 1 Replies
View Related
Nov 26, 2010
I tried to download two AV programmes AVG and Clamwin, both gave me an Error message?
Quote:
Archive: /home/jacob/Downloads/clamwin-0.96.4-setup.exe
[/home/jacob/Downloads/clamwin-0.96.4-setup.exe]
End-of-central-directory signature not found. Either this file is not a zipfile, or it constitutes one disk of a multi-part archive. In the latter case the central directory and zipfile comment will be found on the last disk(s) of this archive. zipinfo: cannot find zipfile directory in one of /home/jacob/Downloads/clamwin-0.96.4-setup.exe or /home/jacob/Downloads/clamwin-0.96.4-setup.exe.zip, and cannot find /home/jacob/Downloads/clamwin-0.96.4-setup.exe.ZIP, period.
View 5 Replies
View Related
Jan 14, 2011
I just downloaded the iso and put it on a usb with the usb installer but my pc wouldn't load it kept saying boot error and I made sure it was 1st boot option and still didn't work and now I am trying to install it by "wubi.exe" and its saying .... "there is no disk in the drive. Please insert a disk into drivedeviceharddisk1dr1".
View 5 Replies
View Related
Mar 9, 2010
when i reboot my system i give the grub loading error and system doesnt start up me the solution how to resolve it
View 4 Replies
View Related
Jan 31, 2010
I installed perl v5.8.5 built for i686-linux on my system recently. From that day if I want to run my vi edition I am getting the error as:
Code:
vim: error while loading shared libraries: libperl.so: cannot open shared object file: No such file or directory
I am using:
Code:
[root@station130 CORE]# uname -a
Linux station130 2.6.9-5.EL #1 Wed Jan 5 19:22:18 EST 2005 i686 i686 i386 GNU/Linux
View 5 Replies
View Related
Aug 5, 2010
I downloaded the latest Skype beta from Skype's site and installed it. When I click on the icon, nothing happens, so I tried from an xterm and I get the error:
skype: error while loading shared libraries: libXv.so.1: cannot open shared object file: No such file or directory.
I looked up libXv in the software manager, and it looks to be installed.
What do I need to do to get Skype running?
BTW, two question:
Is it standard in case of errors that running from the UI simply does nothing, and there's need to run from a terminal window to see them?
How do I copy text from xterm (in order to paste in a post like this)?
View 9 Replies
View Related